共查询到19条相似文献,搜索用时 171 毫秒
1.
Modbus协议是低压电气应用广泛的现场总线,生产厂商在遵循Modbus协议定义的消息结构的同时,在产品应用方面使用规则及实现方法各异。为此研究具有代表性的不同品牌的PLC、智能仪表之间的Modbus RTU通信性能,并通过开发实验案例介绍了基于Modbus RTU通信协议的底层设备的远程监控与数据共享的实现方法。实验表明,遵循不同品牌设备之间Modbus参数设置及地址对应规则,合理设置主从站通信指令的轮询规则,可以方便、可靠地实现低成本、高性能的主从式远程监控系统,具有一定的借鉴和指导意义。 相似文献
2.
文中介绍了一种基于RS-485串行通信接口与Modbus协议的多功能网络电力仪表,给出了该仪表的测量原理、详细的硬件结构和软件求解流程.该仪表以dsPIC33FJ128GP706数字信号控制器为核心,利用MCU内置A/D模块对6路电信号进行实时同步采样,经软件计算实现对电压、电流、频率、功率因数、有功功率、无功功率、电能和谐波等电参量的精确测量,经实验验证精度达到0.5S级.再配以Modbus现场总线测量和控制模块可组成电力监控系统,实现配电监控系统的遥测、遥信、遥控、遥调的功能. 相似文献
3.
4.
基于CAN总线网络的现场监控系统 总被引:1,自引:0,他引:1
介绍了一种基于CAN总线网络的现场参量监控系统的设计与实现。系统以C8051F040作为主控制器,利用其内部集成的CAN总线控制器,构成了多节点总线型监控网络,实现了分布式现场节点酸碱度及温度等环境参量的监控。介绍了监控系统的整体结构,并重点阐述了监控系统中现场节点的硬件以及软件设计。该系统已经被用于制药以及食品加工等工业现场,实践证明系统具有良好的可扩展性、可靠性以及广泛的应用价值。 相似文献
5.
基于嵌入式STM32的ModbusRTU协议实现 总被引:1,自引:0,他引:1
随着工业现场总线技术的快速发展,Modbus协议以其高效性、可靠性,广泛应用于电力行业。为了提高电厂对数据采集的可靠性和实时性,提出了将Modbus通信协议与32位STM32F103ZE微处理器相结合的设计方案,介绍了系统的总体设计方案和Modbus通信协议的内容。在嵌入式实时操作系统μC/OS-Ⅱ上实现了基于ModbusRTu通信协议的主站和从站的通信,并详细讨论了Modbus通信协议中CRC校验码的生成。实验结果表明,该方案有效地实现了Modbus协议,可以广泛地应用于电厂和其他工业现场。 相似文献
6.
7.
8.
9.
CC-LINK现场总线是目前在工业自动化领域中应用最为广泛的现场总线通讯技术之一.MPS 系统是模块化生产系统的简称,每个模块工作站均设置有控制器对各模块工作站进行独立控制.在MPS系统各模块工作站之间建立了CC-LINK现场总线通讯网络,从而实现了对MPS系统中各工作站的分散监控,使得系统的生产效率得到了显著提高,且大大提高了系统的可靠性和可维护性. 相似文献
10.
介绍了一种精细化工厂自动进料控制系统设计。该系统基于西门子SIMATIC PCS7系统平台开发,整个系统主要由控制器层、系统网络层、终端网络层三部分构成。控制器层由S7-400控制器通过现场总线层实现对现场仪表的监测和输出控制;系统网络层将所有现场控制器、服务器、工程师站、操作员单站通过系统网络连接到一起,所有服务器、客户机操作员站通过终端网络层连接到一起,客户机操作员站通过服务器获得控制器层的数据并将操作员指令传达到控制器。现场总线层采用ET200M分布式IO系统,下带FM350-2 COUNTER模块和MICRO MOTION高准质量流量计通信,实现罐区原料全自动进料车间反应器,减少了操作人员劳动强度,提高了进料精度,降低了成本。 相似文献
11.
12.
Design and implementation of a new fuzzy PID controller for networked control systems 总被引:1,自引:0,他引:1
This paper presents a practical network platform to design and implement a networked-based cascade control system linking a Smar Foundation Fieldbus (FF) controller (DFI-302) and a Siemens programmable logic controller (PLC-S7-315-2DP) through Industrial Ethernet to a laboratory pilot plant. In the presented network configuration, the Smar OPC tag browser and Siemens WinCC OPC Channel provide the communicating interface between the two controllers. The paper investigates the performance of a PID controller implemented in two different possible configurations of FF function block (FB) and networked control system (NCS) via a remote Siemens PLC. In the FB control system implementation, the desired set-point is provided by the Siemens Human-Machine Interface (HMI) software (i.e, WinCC) via an Ethernet Modbus link. While, in the NCS implementation, the cascade loop is realized in remote Siemens PLC station and the final element set-point is sent to the Smar FF station via Ethernet bus. A new fuzzy PID control strategy is then proposed to improve the control performances of the networked-based control systems due to an induced transmission delay degradation effect. The proposed strategy utilizes an innovative idea based on sectionalizing the error signal of the step response into three different functional zones. The supporting philosophy behind these three functional zones is to decompose the desired control objectives in terms of rising time, settling time and steady-state error measures maintained by an appropriate PID-type controller in each zone. Then, fuzzy membership factors are defined to configure the control signal on the basis of the fuzzy weighted PID outputs of all three zones. The obtained results illustrate the effectiveness of the proposed fuzzy PID control scheme in improving the performances of the implemented NCS for different transportation delays. 相似文献
13.
14.
15.
16.
17.
18.
LED路灯技术的不断发展使道路照明中大规模采用LED路灯成为可能,同时,LED灯具便于调光的特点容易实现单灯控制。RS485总线简单实用、成本相对低廉,利用差分信号传输抗干扰性强。Modbus协议是免费简单可靠的通信协议,已经在工业中得到广泛应用,并已被标准化。文章介绍了一种利用RS485总线和ModbusRTU协议实现路灯控制系统的自动化方案,取得了不错的实验效果。 相似文献