轴向冲击载荷作用下弹性圆柱壳横向弯曲动态屈曲

研究在轴向冲击载荷下弹性圆柱壳动态屈曲问题.通过构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题.辛本征解反映了局部的压缩屈曲模态和整体的弯曲屈曲模态,特别是在冲击端为自由支承边界时的特殊屈曲方式.数值结果给出了具体的临界载荷和屈曲模态规律.     

非线性弹性地基梁在随动载荷作用下的屈曲和振动

基于可伸长梁的几何非线性理论,建立了非线性弹性地基上梁在随动载荷作用下的屈曲问题和振动问题控制方程,分别采用打靶法分析了弹性地基梁的后屈曲行为以及后屈曲构形上的振动问题。给出了不同非线性弹性地基系数下,梁在随动载荷作用下的过屈曲平衡路径曲线以及过屈曲附近前三阶频率随载荷变化的曲线。研究表明:立方刚度系数K_2对梁的屈曲和振动影响较小,而线性刚度系数K_1对梁的过屈曲性态和固有频率都有影响。     

辛方法在弹性圆板屈曲问题中的应用

在辛几何空间中将临界载荷和屈曲模态归结为辛本征值和本征解问题,从而形成一种辛方法.研究和讨论了轴对称屈曲和非轴对称屈曲问题,它们分别属于零本征值问题和非零本征值问题.以弹性圆板屈曲问题作为研究对象,借助于系统的能量构造出哈密顿体系,得到了该体系下的所有的本征解.数值结果给出了圆板和圆环板问题的临界载荷和屈曲模态.数值结果表明:对应低阶屈曲模态的临界载荷相对较小且屈曲模态在周向的波纹数也较少,说明在屈曲过程中低阶屈曲模态容易出现,特别是轴对称屈曲更容易发生;对应较大分支数的临界载荷,其值相对较大且屈曲模态在径向的波纹更加复杂;同时物理常数和几何参数也会直接影响临界载荷的大小.     

Hamilton体系下功能梯度梁的热冲击动力屈曲分析

在Hamilton体系下,基于Euler梁理论研究了功能梯度材料梁受热冲击载荷作用时的动力屈曲问题;将非均匀功能梯度复合材料的物性参数假设为厚度坐标的幂函数形式,采用Laplace变换法和幂级数法解析求得热冲击下功能梯度梁内的动态温度场:首先将功能梯度梁的屈曲问题归结为辛空间中系统的零本征值问题,梁的屈曲载荷与屈曲模态分别对应于Hamilton体系下的辛本征值和本征解问题,由分叉条件求得屈曲模态和屈曲热轴力,根据屈曲热轴力求解临界屈曲升温载荷。给出了热冲击载荷作用下一类非均匀梯度材料梁屈曲特性的辛方法研究过程,讨论了材料的梯度特性、结构几何参数和热冲击载荷参数对临界温度的影响。     

两端弹性支承输流管道固有特性研究

输流管道广泛应用于航天航空、石油化工、海洋等重要的工程领域, 其振动特性尤其是系统固有特性一直是国内外学者研究的热点问题. 本文研究了两端弹性支承输流管道横向振动的固有特性, 尤其是在非对称弹性支承下的系统固有特性. 使用哈密顿原理得到了输流管道的控制方程及边界条件, 通过复模态法得到了静态管道的模态函数, 以其作为伽辽金法的势函数和权函数对线性派生系统控制方程进行截断处理. 分析了两端对称支承刚度、两端非对称支承刚度、管道长度以及流体质量比对系统固有频率的影响规律, 重点讨论了管道两端可能形成的非对称支承条件下固有频率的变化规律. 结果表明, 较大的对称支承刚度下管道的第一阶固有频率下降较快; 当管道两端支承刚度变化时, 管道的各阶固有频率在两端支承刚度相等时取得最值; 对于两端非对称支承的管道而言, 两端支承刚度越接近, 第一阶固有频率下降的越快, 而且相应的临界流速越小; 流体的流速越大, 其对两端非对称弹簧支承的管道固有频率的影响更为明显.      

分析弹性支承输流管道的失稳临界流速

研究了两端弹性支承输流管道静态失稳和动态失稳临界流速. 根据梁模型横向弯曲振动模态 函数，由两端弹性支承的边界条件得到了其模态函数的一般表达式. 根据特征方程具体分析 了弹性支承刚度、质量比、流体压力和管截面轴向力等主要参数对失稳临界流速的影响. 数 值计算结果表明，管道在弹性支承下的动力稳定性比较复杂，在较小的弹性支承刚度和较小 的参数范围内，管道主要表现为动态颤振失稳；在较大的弹性支承刚度和较大的参数作用下， 管道的失稳形式主要表现为静态失稳；并且失稳临界流速随流体压力和管截面轴向压力的增 加而下降，随管截面轴向拉力的增加而上升.     

弹性圆柱壳在轴向冲击载荷和温度耦合作用下的屈曲

通过引入哈密顿体系,将临界载荷和临界温度及它们所对应的屈曲模态归结为辛体系下的广义本征值和本征解问题。根据辛本征解的正交性和完备性,给出了全部的且独立存在的屈曲模态。数值结果表明,在轴向冲击载荷和温度耦合作用下,弹性圆柱壳的屈曲呈现出复杂的模式,温度直接影响冲击临界载荷的大小。随着温度的增加,冲击临界荷载降低,最后,文中给出各种条件下的屈曲模态。     

径向弹性约束下功能梯度圆板的热过屈曲

研究了周边具有面内径向弹性约束功能梯度圆板在横向非均匀升温下的热过屈曲行为.基于von Karman薄板理论,推导出了横向非均匀加热功能梯度圆板在径向弹性约束作用下的位移形式的轴对称热过屈曲控制方程.假设功能梯度材料性质沿厚度方向按幂函数连续变化,采用打靶法求解得到非线性常微分方程边值问题,获得了周边简支和夹紧条件下功能梯度圆板的热过屈曲响应.定量分析了径向弹性约束对圆板的临界屈曲温度载荷以及热过屈曲变形的影响,给出了不同弹性约束刚度功能梯度圆板的热过屈曲平衡路径和平衡构形.数值结果表明,径向弹性约束对圆板的热过屈曲平衡路径的影响显著,随着约束刚度的减小,临界屈曲温度载荷增大.     

辛方法和弹性圆柱壳在内外压和轴向冲击下的动态屈曲

针对有内压或外压的弹性圆柱壳在轴向冲击载荷耦合作用下的动态屈曲问题,构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题,从而形成一种辛方法。该方法直接得到非轴对称的屈曲模态。数值结果给出了圆柱壳问题的临界载荷和屈曲模态以及一些规律。     

悬臂高梁在静动态载荷作用下侧向失稳的实验研究

本文进行了平头圆柱形弹体对铝合金悬臂高梁自由端正撞击引起侧向失稳的实验研究．通过多种不同尺寸梁的实验，研究了梁在静动态载荷下的侧向失稳临界载荷值及屈曲模态．最后给出一个在撞击载荷下，计算悬臂高梁侧向失稳临界冲击动能值的经验公式．     

Thermal buckling and post-buckling of pinned–fixed Euler–Bernoulli beams on an elastic foundation

In this article, both thermal buckling and post-buckling of pinned–fixed beams resting on an elastic foundation are investigated. Based on the accurate geometrically non-linear theory for Euler–Bernoulli beams, considering both linear and non-linear elastic foundation effects, governing equations for large static deformations of the beam subjected to uniform temperature rise are derived. Due to the large deformation of the beam, the constraint forces of elastic foundation in both longitudinal and transverse directions are taken into account. The boundary value problem for the non-linear ordinary differential equations is solved effectively by using the shooting method. Characteristic curves of critical buckling temperature versus elastic foundation stiffness parameter corresponding to the first, the second, and the third buckling mode shapes are plotted. From the numerical results it can be found that the buckling load-elastic foundation stiffness curves have no intersection when the value of linear foundation stiffness parameter is less than 3000, which is different from the behaviors of symmetrically supported (pinned–pinned and fixed–fixed) beams. As we expect that the non-linear foundation stiffness parameter has no sharp influence on the critical buckling temperature and it has a slight effect on the post-buckling temperature compared with the linear one.     

Nonlinear free vibration and post-buckling analysis of functionally graded beams on nonlinear elastic foundation

In this study, simple analytical expressions are presented for large amplitude free vibration and post-buckling analysis of functionally graded beams rest on nonlinear elastic foundation subjected to axial force. Euler–Bernoulli assumptions together with Von Karman’s strain–displacement relation are employed to derive the governing partial differential equation of motion. Furthermore, the elastic foundation contains shearing layer and cubic nonlinearity. He’s variational method is employed to obtain the approximate closed form solution of the nonlinear governing equation. Comparison between results of the present work and those available in literature shows the accuracy of this method. Some new results for the nonlinear natural frequencies and buckling load of the FG beams such as the effect of vibration amplitude, elastic coefficients of foundation, axial force, and material inhomogenity are presented for future references.     

The unilateral contact buckling problem of continuous beams in the presence of initial geometric imperfections: An analytical approach based on the theory of elastic stability

An analytical method for the treatment of the elastic buckling problem of continuous beams with intermediate unilateral constraints is presented, which is based on the fundamental theory of elastic stability. The study focuses on the unilateral contact buckling problem of beams in the presence of initial geometric imperfections. The mathematical Euler approach, based on the fundamental solution of the boundary value problem of the buckling of continuous beams, is appropriately modified in order to take into account the unilateral contact conditions. Furthermore, in order the obtained analytical solutions to be applicable for practical design cases, the actual strength of the cross-section of the beam under combined compression and bending is considered. The implementation of the proposed method is demonstrated through a characteristic example.     

Dynamic torsional buckling of multi-walled carbon nanotubes embedded in an elastic medium

In this paper the dynamic torsional buckling of multi-walled carbon nanotubes （MWNTs） embedded in an elastic medium is studied by using a continuum mechanics model. By introducing initial imperfections for MWNTs and applying the preferred mode analytical method, a buckling condition is derived for the buckling load and associated buckling mode. In particular, explicit expressions are obtained for embedded double-walled carbon nanotubes （DWNTs）. Numerical results show that, for both the DWNTs and embedded DWNTs, the buckling form shifts from the lower buckling mode to the higher buckling mode with increasing the buckling load, but the buckling mode is invari- able for a certain domain of the buckling load. It is also indicated that, the surrounding elastic medium generally has effect on the lower buckling mode of DWNTs only when compared with the corresponding one for individual DWNTs.     

Modeling and analysis of micro-sized plates resting on elastic medium using the modified couple stress theory

Analytical solutions for bending, buckling, and vibration of micro-sized plates on elastic medium using the modified couple stress theory are presented. The governing equations for bending, buckling and vibration are obtained via Hamilton’s principles in conjunctions with the modified couple stress and Kirchhoff plate theories. The surrounding elastic medium is modeled as the Winkler elastic foundation. Navier’s method is being employed and analytical solutions for the bending, buckling and free vibration problems are obtained. Influences of the elastic medium and the length scale parameter on the bending, buckling, and vibration properties are discussed.     

Dynamic buckling mode of an elastic bar

The conception of buckling relative initial imperfection is presented in this paper. According to Boulli-Euler beam equation, the dynamic buckling mode of an elastic bar under the homogeneous boundary conditions can be derived by applying the preferred mode analytical method. As an example, the dynamic buckling mode of an elastic bar clamped at both ends is discussed.     

薄壁截面梁的歪曲屈曲

本文在梁的整体屈曲分析中,废除了传统的刚性截面假定(刚周边假定),允许梁截面自由地歪曲,进而研究了薄壁截面梁的歪曲屈曲性能。分析中采用了样条有限条法,考虑了各种不同的荷载形式、支承条件和边界约束。这一方法与有限元法相比较,计算工作量大大地减少。数值计算结果表明,在梁长细比的较大范围内,歪曲屈曲模型对梁的设计起控制作用。     

Exact analytical solutions for the local and global buckling of sandwich beam-columns under various loadings

Sandwich structures are widely used in many industrial applications, due to the attractive combination of a lightweight and strong mechanical properties. This compromise is realized thanks to the presence of different parts in the composite material, namely the skins and possibly core reinforcements or thin-walled core structure which are both thin/slender and stiff relative to the other parts, namely the homogeneous core material, if any. The buckling phenomenon thus becomes mainly responsible for the final collapse of such sandwiches. In this paper, classical sandwich beam-columns (with homogeneous core materials) are considered and elastic buckling analyses are performed in order to derive the critical values and the associated bifurcation modes under various loadings (compression and pure bending). The two faces are represented by Euler–Bernoulli beams, whereas the core material is considered as a 2D continuous solid. A set of partial differential equations is first obtained from a general bifurcation analysis, using the above assumptions. Original closed-form analytical solutions of the critical loading and mode of a sandwich beam-column are then derived for various loading conditions. Finally, the proposed analytical formulae are validated using 2D linearized buckling finite element computations, and parametric analyses are performed.     

Analytical modeling and finite element simulation of the plastic collapse of sandwich beams with pin-reinforced foam cores

Analytical predictions are presented for the plastic collapse strength of lightweight sandwich beams having pin-reinforced foam cores that are loaded in 3-point bending. Both polymer and aluminum foam cores are considered, whilst the facesheet and the pins are made of either composite or metal. Four different failure modes are account for: metal facesheet yield or composite facesheet microbuckling, facesheet wrinkling, plastic shear of the core, and facesheet indentation beneath the loading rollers. A micromechanics-based model is developed and combined with the homogenization approach to calculate the effective properties of pin-reinforced foam cores. To calculate the elastic buckling strength of pin reinforcements, the pin-reinforced foam core is treated as assemblies of simply supported columns resting upon an elastic foundation. Minimum mass design of the sandwich is then obtained as a function of the prescribed structural load index, subjected to the constraint that none of the above failure modes occurs. Collapse mechanism maps are constructed and compared with the failure maps of foam-cored sandwich beams without pin reinforcements. Finite element simulations are carried out to verify the analytical model and to study the performance and failure mechanisms of the sandwich subject to loading types other than 3-point bending. The results demonstrate that the weaker the foam is, the more optimal the pin-reinforced foam core becomes, and that sandwich beams with pin-reinforced polymer foam cores are structurally more efficient than foam- or truss-cored sandwich beams.     

Postbuckling instability of nonlinear nanobeam with geometric imperfection embedded in elastic foundation

In this paper, the static instability of a nanobeam with geometrical imperfections that is embedded in elastic foundation is investigated. Size-dependent effect is included in the nonlinear model. It is argued that nonlocal parameter may render the nanobeam initially unstable. Static response is studied and the condition for instability is stated. The exact postbuckling solution for both the straight and curved nanobeam is presented. It is shown that the bifurcation diagram of a curved nanobeam with initial sinusoidal configuration is similar to that of a straight nanobeam in its nearest buckling mode. The results are verified with pervious relevant works on straight nanobeams and classical theory of curved beams and excellent agreement is shown.