Theoretical proton affinity and fluoride affinity of nerve agent VX

Proton affinity and fluoride affinity of nerve agent VX at all of its possible sites were calculated at the RI-MP2/cc-pVTZ//B3LYP/6-31G* and RI-MP2/aug-cc-pVTZ//B3LYP/6-31+G* levels, respectively. The protonation leads to various unique structures, with H(+) attached to oxygen, nitrogen, and sulfur atoms; among which the nitrogen site possesses the highest proton affinity of -ΔE ～ 251 kcal/mol, suggesting that this is likely to be the major product. In addition some H(2), CH(4) dissociation as well as destruction channels have been found, among which the CH(4) + [Et-O-P(═O)(Me)-S-(CH(2))(2)-N(+)(iPr)═CHMe] product and the destruction product forming Et-O-P(═O)(Me)-SMe + CH(2)═N(+)(iPr)(2) are only 9 kcal/mol less stable than the most stable N-protonated product. For fluoridization, the S-P destruction channel to give Et-O-P(═O)(Me)(F) + [S-(CH(2))(2)-N-(iPr)(2)](-) is energetically the most favorable, with a fluoride affinity of -ΔE ～ 44 kcal. Various F(-) ion-molecule complexes are also found, with the one having F(-) interacting with two hydrogen atoms in different alkyl groups to be only 9 kcal/mol higher than the above destruction product. These results suggest VX behaves quite differently from surrogate systems.     

Mechanistic Study on the Monofunctional Binding of Hydrolysis Products of Non-planar Heterocyclic Complexes Trans-[PtCl_2NH_3（piperidine）] and Trans-[PtCl_2（piperidine）_2] to DNA Purine Bases

The monofunctional substitution reactions between trans-[PtCl(H2O)(NH3)(pip)]+,trans-[Pt(H2O)2(NH3)(pip)]2+,trans-[PtCl(H2O)(pip)2]+,trans-[Pt(H2O)2(pip)2]2+ (pip = piperidine) and adenine/guanine nucleotides are explored by using B3LYP hybrid functional and IEF-PCM salvation models. For the trans-[Pt(H2O)2(NH3)(pip)]2+ and trans-[PtCl(H2O)(NH3)(pip)]+ complexes,the computed barrier heights in aqueous solution are 13.5/13.5 and 11.6/11.6 kcal/mol from trans-Pt-chloroaqua complex to trans/cis-monoadduct for adenine and guanine,and the corresponding values are 20.7/20.7 and 18.8/18.8 kcal/mol from trans-Pt-diaqua complex to trans/cis-monoadduct for adenine and guanine,respectively. For trans-[PtCl(H2O)(pip)2]+ and trans-[Pt(H2O)2(pip)2]2+,the corresponding values are 21.5/21.3 and 19.4/19.4 kcal/mol,and 26.0/26.0 and 20.7/20.8 kal/mol for adenine and guanine,respectively. Our calculations demonstrate that the barrier heights of chloroaqua are lower than the corresponding values of diaqua for adenine and guanine. In addition,the free energies of activation for guanine in aqueous solution are all smaller than that for adenine,which predicts a preference of 1.9 kcal/mol when trans-[PtCl(H2O)(NH3)(pip)]+ and trans-[Pt(H2O)2(NH3)(pip)]2+ are the active agents and ～1.9 and ～ 5.3 kcal/mol when trans-[PtCl(H2O)(pip)2]+ and trans-[Pt(H2O)2(pip)2]2+ are the active agents,respectively. For the reaction of trans-Pt-chloroaqua (or diaqua) to cis-monoadduct,we obtain the same transition-state structure as from the reaction of trans-Pt-chloroaqua (or diaqua) to trans-monoadduct,which seems that the trans-Pt-chloroaqua (or diaqua) complex can generate trans-or cis-monoadduct via the same transition-state.     

Thioether complexes of palladium(II) and platinum(II) as artificial peptidases. residue-selective peptide cleavage by a palladium(II) complex

We report the synthesis and characterization of perchlorate salts containing the following three novel complex cations each with a bidentate thioether ligand: binuclear cis-[Pt(CH3SCH2CH2CH2SCH3)(mu-OH)]22+, mononuclear cis-[Pt(CH3SCH2CH2CH2SCH3)(H2O)2]2+, and mononuclear cis-[Pd(CH3SCH2CH2CH2SCH3)(H2O)2]2+. Despite their analogous compositions, the mononuclear Pt(II) and Pd(II) complexes differ in the selectivity with which they promote the hydrolysis of polypeptides. The complex cis-[Pt(CH3SCH2CH2CH2SCH3)(H2O)2]2+ promotes slow but selective cleavage of Met-Pro peptide bonds at pH 2.0. The selectivity of the complex cis-[Pd(CH3SCH2CH2CH2SCH3)(H2O)2]2+ is pH-dependent. At pH 2.0, this Pd(II) complex promotes residue-selective hydrolysis of the X-Y bond in X-Y-Met and X-Y-His sequences; the rate is enhanced when residue Y is proline. At pH 7.0, this kinetic preference becomes sequence-selective in that the Pd(II) complex exclusively cleaves the X-Pro bond in X-Pro-Met and X-Pro-His sequences. The enhanced reactivity of the X-Pro amide group is attributed to the high basicity of its carbonyl oxygen atom. Binding of the metal(II) atom enhances the electrophilicity of the carbonyl carbon atom and promotes nucleophilic attack by a solvent water molecule. The bidentate thioether ligand disfavors the formation of hydrolytically unreactive complexes, allowing the Pd(II) complex to promote the cleavage reaction.     

Synthesis and structure of cyclic phosphate, phosphoramidate, phosphonates, and phosphonium salts. Phosphatrane formation

Reaction of tris(2-hydroxy-3,5-dimethylbenzyl)amine (6) with phosphorus reagents led to the formation of the phosphoramidate, N[CH2(Me2C6H2)O]2PO (1), the phosphate N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)(OPh) (2), the phosphonium salts N[CH2(Me2C6H2)O]3PMe+I- (3A) and N[CH2(Me2C6H2)O]3PMe+I3- (3B), and the phosphonates N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OH]P(O)Me (4) and N[CH2(Me2C6H2)O]2[CH2(Me2C6H2)OSiMe3]P(O)Me (5). X-ray analysis provided molecular structures for all of the compounds. The solid-state structural representations were supported in solution by an analysis of the NCH2 proton NMR patterns. The structures of 3A and 3B show the presence of phosphatranes with weak P-N donor interactions. These represent the first phosphatranes containing all six-membered rings. Variable temperature analysis of the 1H NMR spectra of 3A indicates fluxional behavior whereby a racemic mixture of the chiral phosphonium salt rapidly intraconverts at room temperature. The activation energy for the enantiomeric conversion of the clockwise and anticlockwise orientations of the propeller-like phosphatrane is 11.2 kcal/mol, which is compared to that of the isoelectronic silatrane N[CH2(Me2C6H2)O]3SiMe (E), 10.3 kcal/mol.     

Periodic density functional theory study of methane activation over La(2)O(3): activity of O(2-), O(-), O(2)(2-), oxygen point defect,and Sr(2+)-doped surface sites

Results of gradient-corrected periodic density functional theory calculations are reported for hydrogen abstraction from methane at O(s)(2-), O(s)(-), O(2)(s)(2-) point defect, and Sr(2+)-doped surface sites on La(2)O(3)(001). The results show that the anionic O(s)(-) species is the most active surface oxygen site. The overall reaction energy to activate methane at an O(s)(-) site to form a surface hydroxyl group and gas-phase (*)CH(3) radical is 8.2 kcal/mol, with an activation barrier of 10.1 kcal/mol. The binding energy of hydrogen at an site O(s)(-) is -102 kcal/mol. An oxygen site with similar activity can be generated by doping strontium into the oxide by a direct Sr(2+)/La(3+) exchange at the surface. The O(-)-like nature of the surface site is reflected in a calculated hydrogen binding energy of -109.7 kcal/mol. Calculations indicate that surface peroxide (O(2(s))(2-)) sites can be generated by adsorption of O(2) at surface oxygen vacancies, as well as by dissociative adsorption of O(2) across the closed-shell oxide surface of La(2)O(3)(001). The overall reaction energy and apparent activation barrier for the latter pathway are calculated to be only 12.1 and 33.0 kcal/mol, respectively. Irrespective of the route to peroxide formation, the O(2)(s)(2-) intermediate is characterized by a bent orientation with respect to the surface and an O-O bond length of 1.47 A; both attributes are consistent with structural features characteristic of classical peroxides. We found surface peroxide sites to be slightly less favorable for H-abstraction from methane than the O(s)(-) species, with DeltaE(rxn)(CH(4)) = 39.3 kcal/mol, E(act) = 47.3 kcal/mol, and DeltaE(ads)(H) = -71.5 kcal/mol. A possible mechanism for oxidative coupling of methane over La(2)O(3)(001) involving surface peroxides as the active oxygen source is suggested.     

Ligand Exchange Processes on Solvated Beryllium Cations. II [Be(solvent)(12‐Crown‐4)]2+

The solvation and solvent exchange mechanism of [Be(12‐crown‐4)]²⁺ in water and ammonia was studied by DFT calculations (RB3LYP/6‐311+G**). In solution, five‐fold coordinated Be²⁺ species of quadratic pyramidal [Be(H₂O)(12‐crown‐4)]²⁺ and [Be(NH₃)(12‐crown‐4)]²⁺ exist. The water and ammonia exchange reactions follow an associative interchange mechanism, similar to that found for the pure solvent complexes [Be(H₂O)₄]²⁺ and [Be(NH₃)₄]²⁺. The activation barriers are clearly smaller than for the pure solvent complexes, viz. [Be(H₂O)(12‐crown‐4)]²⁺: 6.0 kcal/mol and [Be(NH₃)(12‐crown‐4)]²⁺: 15.3 kcal/mol.     

Activation of alkenes and H2 by [Fe]-H2ase model complexes

The established ability of the Fe(II) bridging hydride species (micro-H)(micro-pdt)[Fe(CO)2(PMe3)]2+, 1-H+, to take-up and heterolytically activate dihydrogen, resulting in H/D scrambling of H2/D2 and H2/D2O mixtures (Zhao et al. Inorg. Chem. 2002, 41, 3917) has prompted a study of simultaneous alkene/H2 activation by such [Fe]H2ase model complexes. That the required photolysis produced an open site was substantiated by substitution of CO in 1-H+ by CH3CN with formation of structurally characterized [(micro-H)(micro-pdt)[Fe(CO)2(PMe3)][Fe(CO)(CH3CN)(PMe3)]]+[PF6]-. Under similar photolytic conditions, H/D exchange reactions between D2 and terminal alkenes (ethylene, propene and 1-butene), but not bulkier alkenes such as 2-butene or cyclohexene, were catalyzed by 1-H+ and the edt (SCH2CH2S) analogue, 2-H+. Substantial regioselectivity for H/D exchange at the internal vinylic hydrogen was observed. The extent to which the olefins were deuterium enriched vs deuterated was catalyst dependent. The stabilizing effect of the binuclear chelating ligands, SCH2CH2CH2S, pdt, and SCH2CH2S, edt, is required for the activity of binuclear catalysts, as the mono-dentate micro-SEt analogue decomposed to inactive products under the photolytic conditions of the catalysis. Reactions of 1 and 2 with EtOSO2CF3 yielded the S-alkylated products, [(micro-SCH2CH2CH2SEt)[Fe(CO)2(PMe3)]2]+[SO3CF3]- (1-Et+), and 2-Et+, rather than micro-C2H5 analogues to the micro-H of 1-H+. The stability and lack of reactivity toward H2 of 1-Et+ and 2-Et+, indicates they are not on the reaction path of the olefin/D2 H/D exchange process. A mechanism with olefin binding to an open site created by CO loss and formation of an Fe-(CH2CHDR) intermediate is indicated. A likely role of a binuclear chelate effect is implicated for the unique S-XXX-S cofactor in the active site of [Fe]H2ase.     

The first example of a nitrile hydratase model complex that reversibly binds nitriles

Nitrile hydratase (NHase) is an iron-containing metalloenzyme that converts nitriles to amides. The mechanism by which this biochemical reaction occurs is unknown. One mechanism that has been proposed involves nucleophilic attack of an Fe-bound nitrile by water (or hydroxide). Reported herein is a five-coordinate model compound ([Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+)) containing Fe(III) in an environment resembling that of NHase, which reversibly binds a variety of nitriles, alcohols, amines, and thiocyanate. XAS shows that five-coordinate [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) reacts with both methanol and acetonitrile to afford a six-coordinate solvent-bound complex. Competitive binding studies demonstrate that MeCN preferentially binds over ROH, suggesting that nitriles would be capable of displacing the H(2)O coordinated to the iron site of NHase. Thermodynamic parameters were determined for acetonitrile (DeltaH = -6.2(+/-0.2) kcal/mol, DeltaS = -29.4(+/-0.8) eu), benzonitrile (-4.2(+/-0.6) kcal/mol, DeltaS = -18(+/-3) eu), and pyridine (DeltaH = -8(+/-1) kcal/mol, DeltaS = -41(+/-6) eu) binding to [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) using variable-temperature electronic absorption spectroscopy. Ligand exchange kinetics were examined for acetonitrile, iso-propylnitrile, benzonitrile, and 4-tert-butylpyridine using (13)C NMR line-broadening analysis, at a variety of temperatures. Activation parameters for ligand exchange were determined to be DeltaH(+ +) = 7.1(+/-0.8) kcal/mol, DeltaS(+ +) = -10(+/-1) eu (acetonitrile), DeltaH(+ +) = 5.4(+/-0.6) kcal/mol, DeltaS(+ +) = -17(+/-2) eu (iso-propionitrile), DeltaH(+ +) = 4.9(+/-0.8) kcal/mol, DeltaS(+ +) = -20(+/-3) eu (benzonitrile), and DeltaH(+ +) = 4.7(+/-1.4) kcal/mol DeltaS(+ +) = -18(+/-2) eu (4-tert-butylpyridine). The thermodynamic parameters for pyridine binding to a related complex, [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) (DeltaH = -5.9(+/-0.8) kcal/mol, DeltaS = -24(+/-3) eu), are also reported, as well as kinetic parameters for 4-tert-butylpyridine exchange (DeltaH(+ +) = 3.1(+/-0.8) kcal/mol, DeltaS(+ +) = -25(+/-3) eu). These data show for the first time that, when it is contained in a ligand environment similar to that of NHase, Fe(III) is capable of forming a stable complex with nitriles. Also, the rates of ligand exchange demonstrate that low-spin Fe(III) in this ligand environment is more labile than expected. Furthermore, comparison of [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) and [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) demonstrates how minor distortions induced by ligand constraints can dramatically alter the reactivity of a metal complex.     

Hydrogen atom abstraction by a mononuclear ferric hydroxide complex: insights into the reactivity of lipoxygenase

The lipoxygenase mimic [Fe(III)(PY5)(OH)](CF3SO3)2 is synthesized from the reaction of [Fe(II)(PY5)(MeCN)](CF3SO3)2 with iodosobenzene, with low-temperature studies suggesting the possible intermediacy of an Fe(IV) oxo species. The Fe(III)-OH complex is isolated and identified by a combination of solution and solid-state methods, including EPR and IR spectroscopy. [Fe(III)(PY5)(OH)](2+) reacts with weak X-H bonds in a manner consistent with hydrogen-atom abstraction. The composition of this complex allows meaningful comparisons to be made with previously reported Mn(III)-OH and Fe(III)-OMe lipoxygenase mimics. The bond dissociation energy (BDE) of the O-H bond formed upon reduction to [Fe(II)(PY5)(H2O)]2+ is estimated to be 80 kcal mol(-1), 2 kcal mol(-1) lower than that in the structurally analogous [Mn(II)(PY5)(H2O)]2+ complex, supporting the generally accepted idea that Mn(III) is the thermodynamically superior oxidant at parity of coordination sphere. The identity of the metal has a large influence on the entropy of activation for the reaction with 9,10-dihydroanthracene; [Mn(III)(PY5)(OH)]2+ has a 10 eu more negative DeltaS++ value than either [Fe(III)(PY5)(OH)]2+ or [Fe(III)(PY5)(OMe)]2+, presumably because of the increased structural reorganization that occurs upon reduction to [Mn(II)(PY5)(H2O)]2+. The greater enthalpic driving force for the reduction of Mn(III) correlates with [Mn(III)(PY5)(OH)]2+ reacting more quickly than [Fe(III)(PY5)(OH)]2+. Curiously, [Fe(III)(PY5)(OMe)]2+ reacts with substrates only about twice as fast as [Fe(III)(PY5)(OH)]2+, despite a 4 kcal mol(-1) greater enthalpic driving force for the methoxide complex.     

Chemo- and periselectivity in the addition of [OsO2(CH2)2] to ethylene: a theoretical study

Quantum chemical calculations by using density functional theory at the B3LYP level have been carried out to elucidate the reaction course for the addition of ethylene to [OsO2(CH2)2] (1). The calculations predict that the kinetically most favorable reaction proceeds with an activation barrier of 8.1 kcal mol(-1) via [3+2] addition across the O=Os=CH2 moiety. This reaction is -42.4 kcal mol(-1) exothermic. Alternatively, the [3+2] addition to the H2C=Os=CH2 fragment of 1 leads to the most stable addition product 4 (-72.7 kcal mol(-1)), yet this process has a higher activation barrier (13.0 kcal mol(-1)). The [3+2] addition to the O=Os=O fragment yielding 2 is kinetically (27.5 kcal mol(-1)) and thermodynamically (-7.0 kcal mol(-1)) the least favorable [3+2] reaction. The formal [2+2] addition to the Os=O and Os=CH2 double bonds proceeds by initial rearrangement of 1 to the metallaoxirane 1 a. The rearrangement 1-->1 a and the following [2+2] additions have significantly higher activation barriers (>30 kcal mol(-1)) than the [3+2] reactions. Another isomer of 1 is the dioxoosmacyclopropane 1 b, which is 56.2 kcal mol(-1) lower in energy than 1. The activation barrier for the 1-->1 b isomerization is 15.7 kcal mol(-1). The calculations predict that there are no energetically favorable addition reactions of ethylene with 1 b. The isomeric form 1 c containing a peroxo group is too high in energy to be relevant for the reaction course. The accuracy of the B3LYP results is corroborated by high level post-HF CCSD(T) calculations for a subset of species.     

A theoretical study of the primary oxo transfer reaction of a dioxo molybdenum(VI) compound with imine thiolate chelating ligands: a molybdenum oxotransferase analogue.

The reaction mechanism of an analogue system of the molybdenum oxotransferases was investigated at the density functional (B3P86) level of theory. Kinetic measurements by Schultz and Holm suggest that the reaction MoO(2)(t-BuL-NS)(2) + X --> MoO(t-BuL-NS)(2) + OX (t-BuL-NS = bis(4-tert-butylphenyl)-2-pyridylmethanethiolate(1-)) occurs through an associative transition state. Our results on the model reaction, MoO(2)(SCH(2)CHNH)(2) + P(CH(3))(3) --> MoO(SCH(2)CHNH)(2) + OP(CH(3))(3), support this hypothesis, and indicate that this reaction proceeds through a two-step mechanism via an associative intermediate. The DeltaH(++) for the first, and rate-determining, step was predicted to be 9.4 kcal/mol, and DeltaH(++) for the second step (release of the OP(CH(3))(3) product) was predicted to be 3.3 kcal/mol. These results are in good agreement with the experimental system, for which the rate determining DeltaH(++) = 9.6(6) kcal/mol. Shultz and Holm's experimental model undergoes a significant ligand rearrangement in the oxo transfer reaction: the reactant, MoO(2)(t-BuL-NS)(2), has a trans-S arrangement of the ligands, while the product, MoO(t-BuL-NS)(2), has a trans-N arrangement. To investigate the driving force behind the ligand rearrangement, four model compounds, that systematically removed the unsaturation at the N and the chelate character of the ligands, were modeled at the B3P86 level of theory. For all models of the dioxo species, the trans-N isomer was higher in energy than the trans-S isomer. The analysis of these results indicated that a trans influence accounts for approximately 16% of the energy difference, the unsaturation at the nitrogens accounts for approximately 26%, and the ring strain from the chelator accounts for approximately 58% of the energy difference between the two isomers (trans-N and trans-S). For all models of the monooxo species, only the trans-N species was a stable geometry. Therefore, for the reverse oxo transfer reaction, ligand rearrangement must occur after or during the attack of the OX substrate.     

Theoretical study of [Ni (H2O)n]2+(H2O)m (n ≤ 6, m ≤ 18)

The [Ni-(H(2)O)(n)](2+)(H(2)O)(m) (n ≤ 6, m ≤ 18) complexes were studied by means of first-principles all-electron calculations performed with the BPW91 gradient corrected functional and the 6-311+G(d,p) basis sets for the H, O, and Ni atoms. Triplet states were found as low-lying states for each (n, m) combination. The estimated Ni(2+)-(H(2)O)(n) binding energies (112.8-57.4 kcal/mol for the first layer and 52.0-23.0 kcal/mol for the second one) decreases and the Ni(2+)-OH(2) bond lengths lengthen as n + m increases. With six H(2)O moieties the Ni(2+) ion furnishes its first coordination sphere of octahedral geometry. Further water addition renders the formation of the second layer. The effect of Ni(2+) on the (H(2)O)(n)···(H(2)O)(m) hydrogen bond formation for several "n" and "m" combinations was studied, revealing an enhancement of this kind of bonding, which is of key importance for the stabilization and growth of the clusters. For some n + m isomers the second layer appears before the first octahedral layer is fully formed. For example, the square planar Ni(2+)-(H(2)O)(4) core originates two-dimensional 4 + 2 and 4 + 4 isomers, where each outer water molecule accepts two H-bonds, lying 2.0 kcal/mol above the 6 and 6 + 2 ground states. The clusters were also studied by IR spectra; the OH stretching vibrational frequencies allowed us to identify the outer solvation shells by the presence of red-shifted hydrogen bond regions.     

Ditopic hexaazamacrocycles containing pyridine: synthesis, protonation and complexation studies

Structural studies of metal complexes of five ditopic hexaazamacrocycles containing two pyridine rings ([n]py2N4 n= 18, 20, 22, 24 and 26) have been carried out. The synthesis of macrocycles [22]- to [26]-py2N4 are also reported. The protonation constants of the last three compounds and the stability constants of their complexes with Ni2+, Cu2+, Zn2+, and Pb2+ were determined at 25 degrees C in 0.10 mol dm(-3) KNO3 in aqueous solution. Our results with [22]py2N4 show significant differences from those described previously, while [24]py2N4 has not been studied before and [26]py2N4 is a new compound. Mononuclear and dinuclear complexes of the divalent metal ions studied with [22]- to [26]-py2N4 were found in solution. The stability constants for the ML complexes of the three ligands follow the Irving-Williams order: NiL2+ < CuL2+ > ZnL2+ > PbL2+, however for the dinuclear complexes the values for Pb2+ complexes are higher than the corresponding values for the Ni2+ and the Zn2+ complexes. The X-ray single crystal structures of the supramolecular aggregates [Cu2([20]py2N4)(H2O)4][Cu(H2O)6](SO4)3 x 3H2O and [Cu(2)([20]py(2)N4)(CH3CN)4][Ni([20]py2N4)]2(ClO4)8 x H2O, which are composed of homodinuclear [Cu2([20]py2N4])(H2O)4]4+ and [Cu2([20]py2N4])(CH3CN))4]4+, and mononuclear species, [Cu(H2O)6]2+ and [Ni([20]py2N4)]2+, respectively, assembled by an extensive network of hydrogen bonds, are also reported. In both homodinuclear complexes the copper centres are located at the end of the macrocycle and display distorted square pyramidal coordination environments with the basal plane defined by three consecutive nitrogen donors and one solvent molecule, water in and acetonitrile in . The macrocycle adopts a concertina-type conformation leading to the formation of macrocyclic cavities with the two copper centres separated by intramolecular distances of 5.526(1) and 5.508(7) A in 1a and 2a, respectively. The mononuclear complex [Ni([20]py2N4])]2+ displays a distorted octahedral co-ordination environment with the macrocycle wrapping the metal centre in a helical shape. EPR spectroscopy of the copper complexes indicated the presence of mono- and dinuclear species.     

Negative-ion photoelectron spectroscopy, gas-phase acidity, and thermochemistry of the peroxyl radicals CH(3)OO and CH(3)CH(2)OO

Methyl, methyl-d(3), and ethyl hydroperoxide anions (CH(3)OO(-), CD(3)OO(-), and CH(3)CH(2)OO(-)) have been prepared by deprotonation of their respective hydroperoxides in a stream of helium buffer gas. Photodetachment with 364 nm (3.408 eV) radiation was used to measure the adiabatic electron affinities: EA[CH(3)OO, X(2)A' '] = 1.161 +/- 0.005 eV, EA[CD(3)OO, X(2)A' '] = 1.154 +/- 0.004 eV, and EA[CH(3)CH(2)OO, X(2)A' '] = 1.186 +/- 0.004 eV. The photoelectron spectra yield values for the term energies: Delta E(X(2)A' '-A (2)A')[CH(3)OO] = 0.914 +/- 0.005 eV, Delta E(X(2)A' '-A (2)A')[CD(3)OO] = 0.913 +/- 0.004 eV, and Delta E(X(2)A' '-A (2)A')[CH(3)CH(2)OO] = 0.938 +/- 0.004 eV. A localized RO-O stretching mode was observed near 1100 cm(-1) for the ground state of all three radicals, and low-frequency R-O-O bending modes are also reported. Proton-transfer kinetics of the hydroperoxides have been measured in a tandem flowing afterglow-selected ion flow tube (FA-SIFT) to determine the gas-phase acidity of the parent hydroperoxides: Delta(acid)G(298)(CH(3)OOH) = 367.6 +/- 0.7 kcal mol(-1), Delta(acid)G(298)(CD(3)OOH) = 367.9 +/- 0.9 kcal mol(-1), and Delta(acid)G(298)(CH(3)CH(2)OOH) = 363.9 +/- 2.0 kcal mol(-1). From these acidities we have derived the enthalpies of deprotonation: Delta(acid)H(298)(CH(3)OOH) = 374.6 +/- 1.0 kcal mol(-1), Delta(acid)H(298)(CD(3)OOH) = 374.9 +/- 1.1 kcal mol(-1), and Delta(acid)H(298)(CH(3)CH(2)OOH) = 371.0 +/- 2.2 kcal mol(-1). Use of the negative-ion acidity/EA cycle provides the ROO-H bond enthalpies: DH(298)(CH(3)OO-H) = 87.8 +/- 1.0 kcal mol(-1), DH(298)(CD(3)OO-H) = 87.9 +/- 1.1 kcal mol(-1), and DH(298)(CH(3)CH(2)OO-H) = 84.8 +/- 2.2 kcal mol(-1). We review the thermochemistry of the peroxyl radicals, CH(3)OO and CH(3)CH(2)OO. Using experimental bond enthalpies, DH(298)(ROO-H), and CBS/APNO ab initio electronic structure calculations for the energies of the corresponding hydroperoxides, we derive the heats of formation of the peroxyl radicals. The "electron affinity/acidity/CBS" cycle yields Delta(f)H(298)[CH(3)OO] = 4.8 +/- 1.2 kcal mol(-1) and Delta(f)H(298)[CH(3)CH(2)OO] = -6.8 +/- 2.3 kcal mol(-1).     

Synthesis, structure, and reactivity of O-donor Ir(III) complexes: C-H activation studies with benzene

Various new thermally air- and water-stable alkyl and aryl analogues of (acac-O,O)2Ir(R)(L), R-Ir-L (acac-O,O = kappa2-O,O-acetylacetonate, -Ir- is the trans-(acac-O,O)2Ir(III) motif, R = CH3, C2H5, Ph, PhCH2CH2, L = Py) have been synthesized using the dinuclear complex [Ir(mu-acac-O,O,C3)-(acac-O,O)(acac-C3)]2, [acac-C-Ir]2, or acac-C-Ir-H2O. The dinuclear Ir (III) complexes, [Ir(mu-acac-O,O,C3)-(acac-O,O)(R)]2 (R = alkyl), show fluxional behavior with a five-coordinate, 16 electron complex by a dissociative pathway. The pyridine adducts, R-Ir-Py, undergo degenerate Py exchange via a dissociative mechanism with activation parameters for Ph-Ir-Py (deltaH++ = 22.8 +/- 0.5 kcal/mol; deltaS++ = 8.4 +/- 1.6 eu; deltaG++298 K) = 20.3 +/- 1.0 kcal/mol) and CH3-Ir-Py (deltaH++ = 19.9 +/- 1.4 kcal/mol; deltaS++ = 4.4 +/- 5.5 eu; deltaG++298 K) = 18.6 +/- 0.5 kcal/mol). The trans complex, Ph-Ir-Py, undergoes quantitatively trans-cis isomerization to generate cis-Ph-Ir-Py on heating. All the R-Ir-Py complexes undergo quantitative, intermolecular CH activation reactions with benzene to generate Ph-Ir-Py and RH. The activation parameters (deltaS++ =11.5 +/- 3.0 eu; deltaH++ = 41.1 +/- 1.1 kcal/mol; deltaG++298 K = 37.7 +/- 1.0 kcal/mol) for CH activation were obtained using CH3-Ir-Py as starting material at a constant ratio of [Py]/[C6D6] = 0.045. Overall the CH activation reaction with R-Ir-Py has been shown to proceed via four key steps: (A) pre-equilibrium loss of pyridine that generates a trans-five-coordinate, square pyramidal intermediate; (B) unimolecular, isomerization of the trans-five-coordinate to generate a cis-five-coordinate intermediate, cis-R-Ir- square; (C) rate-determining coordination of this species to benzene to generate a discrete benzene complex, cis-R-Ir-PhH; and (D) rapid C-H cleavage. Kinetic isotope effects on the CH activation with mixtures of C6H6/C6D6 (KIE = 1) and with 1,3,5-C6H3D3 (KIE approximately 3.2 at 110 degrees C) are consistent with this reaction mechanism.     

Reaction pathways and free energy barriers for alkaline hydrolysis of insecticide 2-trimethylammonioethyl methylphosphonofluoridate and related organophosphorus compounds: electrostatic and steric effects

Reaction pathways and free energy barriers for alkaline hydrolysis of the highly neurotoxic insecticide 2-trimethylammonioethyl methylphosphonofluoridate and related organophosphorus compounds were studied by performing first-principles electronic structure calculations on representative methylphosphonofluoridates, (RO)CH3P(O)F, in which R = CH2CH2N+(CH3)3, CH3, CH2CH2C(CH3)3, CH2CH2CH(CH3)2, CH(CH3)CH2N+(CH3)3, and CH(CH3)CH2N(CH3)2. The dominant reaction pathway was found to be associated with a transition state in which the attacking nucleophile OH- and the leaving group F- are positioned on opposite sides of the plane formed by the three remaining atoms attached to the phosphorus in order to minimize the electrostatic repulsion between these two groups. The free energy barriers calculated for the rate-determining step of the dominant pathway are 12.5 kcal/mol when R = CH2CH2N+(CH3)3, 15.5 kcal/mol when R = CH3, 17.9 kcal/mol when R = CH2CH2C(CH3)3, 16.5 kcal/mol when R = CH2CH2CH(CH3)2, 13.4 kcal/mol when R = CH(CH3)CH2N+(CH3)3, and 18.7 kcal/mol when R = CH(CH(3))CH(2)N(CH(3))(2). The calculated free energy barriers are in good agreement with available experimentally derived activation free energies, i.e. 14.7 kcal/mol when R = CH(3), 13.4 kcal/mol when R = CH2CH2N+(CH3)3, and 13.9 kcal/mol when R = CH(CH3)CH2N+(CH3)3. A detailed analysis of the calculated energetic results and available experimental data suggests that the net charge of the molecule (M) being hydrolyzed is a prominent factor affecting the free energy barrier (DeltaG) for the alkaline hydrolysis of phosphodiesters, phosphonofluoridates, and related organophosphorus compounds. The electrostatic interactions between the attacking nucleophile OH- and the molecule M being hydrolyzed favor such an order of the free energy barrier: DeltaG(M(+)+OH-) < DeltaG(M0+OH-) < DeltaG(M(-)+OH-), where M+, M0, and M- represent the cationic, neutral, and anionic molecules, respectively. The change of the substituent R in (RO)CH(3)P(O)F from CH3 to CH2CH2N+(CH3)3 is associated with both the electrostatic and steric effects on the free energy barrier, but the electrostatic effect dominates the substituent shift of the free energy barrier. This helps to better understand why the alkaline hydrolysis of (RO)CH3P(O)F with R = CH2CH2N+(CH3)3 and CH(CH3)CH2N+(CH3)3 is significantly faster than that with R = CH3. The effect of electrostatic interaction also helps to understand why the rate constants for the alkaline hydrolysis of phosphodiesters, such as intramolecular second messenger adenosine 3',5'-phosphate (cAMP), are generally smaller than those for the alkaline hydrolysis of the phosphonofluoridates and related phosphotriesters.     

Insights into the metathesis reaction involving M-M,C-C,and M-C triple bonds from computations employing density functional theory on model compounds M2(OH)6 and M2(SH)6, where M = Mo and W

Calculations employing density functional theory (Gaussian 98, B3LYP, LANL2DZ, 6-31G) have been undertaken to interrogate the factors influencing the metathesis reaction involving M-M, C-C, and M-C triple bonds for the model compounds M(2)(EH)(6), M(2)(EH)(6)(mu-C(2)H(2)), and [(HE)(3)M(tbd1;CH)](2), where M = Mo, W and E = O, S. Whereas in all cases the ethyne adducts are predicted to be enthalpically favored in the reactions between M(2)(EH)(6) compounds and ethyne, only when M = W and E = O is the alkylidyne product [(HO)(3)W(tbd1;CH)](2) predicted to be more stable than the alkyne adduct. For the reaction M(2)(EH)(6)(mu-C(2)H(2)) --> [(HE)(3)M(tbd1;CH)](2), the deltaG degrees values (kcal mol(-)(1)) are -6 (M = W, E = O), +5 (M = Mo, E = O), +18 (M = W, E = S), and +21 (M = Mo, E = S) and the free energies of activation are calculated to be deltaG() = +19 kcal mol(-)(1) (M = W, E = O) and +34 kcal mol(-)(1) (M = Mo, E = O), where the transition state involves an asymmetric bridged structure M(2)(OH)(4)(mu-OH)(2)(CH)(mu-CH) in which the C-C bond has broken; C.C = 1.89 and 1.98 A for W and Mo, respectively. These results are discussed in terms of the experimental observations of the reactions involving ethyne and the symmetrically substituted alkynes (RCCR, where R = Me, Et) with M(2)(O(t)()Bu)(6) and M(2)(O(t)()Bu)(2)(S(t)()Bu)(4) compounds, where M = Mo, W.     

A theoretical study of the effect of a tetraalkylammonium counterion on the hydrogen bond strength in Z-hydrogen maleate.

High-level ab initio calculations (B3LYP/6-31+G and QCISD(T)/6-311+G**) were carried out to resolve the disagreement between recent experimental and computational estimates of the relative strength of the intramolecular hydrogen bond in Z-hydrogen maleate anion with respect to the normal hydrogen bond in maleic acid. The computational estimates for the strength of the intramolecular hydrogen bond in the gas-phase maleate anion are in a range of 14-28 kcal/mol depending on the choice of the reference structure. Computational data suggest that the electrostatic influence of a counterion such as a tetraalkylammonium cation can considerably weaken the hydrogen bonding interaction (by 1.5-2 times) in the complexed hydrogen maleate anion relative to that in the naked anion. The estimated internal H-bonding energies for a series of Z-maleate/R4N+ salts (R = CH3, C2H5, CH3CH2CH2CH2) range from 8 to 13 kcal/mol. The calculated energy differences between the E- and Z-hydrogen maleates complexed to Me4N+, Et4N+, and Bu4N+ cation are 4.9 (B3LYP/6-31+G(d,p)) and 5.7 and 5.8 kcal/mol (B3LYP/6-31G(d)). It is also demonstrated that the sodium cation exerts a similar electrostatic influence on the hydrogen bond strength in bifluoride anion (FHF-). The present study shows that while low-barrier short hydrogen bonds can exist in the gas phase (the barrier for the hydrogen transfer in maleate anion is only 0.2 kcal/mol at the QCISD(T)/6-311+G//QCISD/6-31+G level), whether they can also be strong in condensed media or not depends on how their interactions with their immediate environment affect their strength.     

Weakly coordinating anions HA2-generated from oxoanions A- and their conjugate acids. Coordination equilibria,ionic conductivities,and the structures of [Cu2(H(CH3SO3)2)4]n and [Cu(CO)(H(CF3CO2)2)]2

The coordination or ion pairing of the hydrogen-bonded anions H(CF3CO2)2- and H(CH3SO3)2- to NEt4+, Li+, Cu+, and/or Cu2+ was investigated. The structure of [Cu2(H(CH3SO3)2)4]n consists of centrosymmetric dimeric moieties that contain two homoconjugated (CH3SO2O-H...OSO2CH3)- anions per Cu2+ ion, forming typical Jahn-Teller tetragonally elongated CuO6 coordination spheres. The oxygen atoms involved in the nearly linear O-H...O hydrogen bonds (O...O approximately 2.62 A) are not coordinated to the Cu2+ ions. The structure of Cu2(CO)2(H(CF3-CO2)2)2 consists of pseudo-C2-symmetric dimers that contain one homoconjugated (CF3COO-H...OCOCF3)- anion per Cu+ ion, forming highly distorted tetrahedral Cu(CO)O3 coordination spheres. Three of the four oxygen atoms in each hydrogen-bonded H(CF3CO2)2- anion are coordinated to the Cu+ ions, including one of the oxygen atoms in each O-H...O hydrogen bond (O...O approximately 2.62 A). Infrared spectra (v(CO) values) of Cu(CO)(CF3CO2) or Cu(CO)(CH3SO3) dissolved in acetonitrile or benzene, with and without added CF3COOH or CH3SO3H, respectively, demonstrate that HA2- anions involving carboxylates or sulfonates are more weakly coordinating than the parent anions RCO2- and RSO3-. Direct current conductivities of THF solutions of Li(CF3CO2) containing varying concentrations of added CF3COOH further demonstrate that Li+ and NEt4+ ion pair much more weakly with H(CF3CO2)2- than with CF3CO2-.     

Oxidative reactivity difference among the metal oxo and metal hydroxo moieties: pH dependent hydrogen abstraction by a manganese(IV) complex having two hydroxide ligands

Clarifying the difference in redox reactivity between the metal oxo and metal hydroxo moieties for the same redox active metal ion in identical structures and oxidation states, that is, M(n+)O and M(n+)-OH, contributes to the understanding of nature's choice between them (M(n+)O or M(n+)-OH) as key active intermediates in redox enzymes and electron transfer enzymes, and provides a basis for the design of synthetic oxidation catalysts. The newly synthesized manganese(IV) complex having two hydroxide ligands, [Mn(Me(2)EBC)(2)(OH)(2)](PF(6))(2), serves as the prototypic example to address this issue, by investigating the difference in the hydrogen abstracting abilities of the Mn(IV)O and Mn(IV)-OH functional groups. Independent thermodynamic evaluations of the O-H bond dissociation energies (BDE(OH)) for the corresponding reduction products, Mn(III)-OH and Mn(III)-OH(2), reveal very similar oxidizing power for Mn(IV)O and Mn(IV)-OH (83 vs 84.3 kcal/mol). Experimental tests showed that hydrogen abstraction proceeds at reasonable rates for substrates having BDE(CH) values less than 82 kcal/mol. That is, no detectable reaction occurred with diphenyl methane (BDE(CH) = 82 kcal/mol) for both manganese(IV) species. However, kinetic measurements for hydrogen abstraction showed that at pH 13.4, the dominant species Mn(Me(2)EBC)(2)(O)(2), having only Mn(IV)O groups, reacts more than 40 times faster than the Mn(IV)-OH unit in Mn(Me(2)EBC)(2)(OH)(2)(2+), the dominant reactant at pH 4.0. The activation parameters for hydrogen abstraction from 9,10-dihydroanthracene were determined for both manganese(IV) moieties: over the temperature range 288-318 K for Mn(IV)(OH)(2)(2+), DeltaH(double dagger) = 13.1 +/- 0.7 kcal/mol, and DeltaS(double dagger) = -35.0 +/- 2.2 cal K(-1) mol(-1); and the temperature range 288-308 K for for Mn(IV)(O)(2), DeltaH(double dagger) = 12.1 +/- 1.8 kcal/mol, and DeltaS(double dagger) = -30.3 +/- 5.9 cal K(-1) mol(-1).