Methods of calculations of the energy of chemical bonds

Mean bond energies, bond dissociation energies, and other characteristics were considered for certain classes of organic (and other) compounds. The state of numerical data was discussed, and these data were ordered in series of related molecules. A methodology for calculating bond energies was developed. Numerical calculations were performed. Certain rules were considered.     

二级粘度液标准物质的研制

以基础油为原料研制了二级粘度液标准物质,对其均匀性和稳定性进行了考察,用方差分析法进行了评价,用标准毛细管粘度计对其进行了定值。实验结果表明,该粘度液标准物质的均匀性良好,稳定性在1年以上,量值准确可靠,达到二级标准物质的技术指标要求。     

Feasibility of ETV-ICP-OES for Characterization of Archaeological Glasses

In the present study the possibilities of electrothermal vaporization inductively coupled plasma optical emission spectrometry (ETV-ICP-OES) for characterization of archaeological glasses were investigated. The objects of our research were fragments of a colorless late antique Roman flat window glass (fifth century A.D.) and colored medieval glass bracelets (eleventh–twelfth century A.D.) excavated in the region of Pernik (West Bulgaria).

The finely ground glass samples were analyzed directly and CHF₃ was used as evaporation and transport modifier. Dried aqueous standard solutions and certified reference materials with different matrix (glass, fly ash, and stream sediment) were used as calibration standards. No matrix effects were observed by the optimized conditions. Measurements were performed using common calibration curves obtained with all appropriate calibration standards and major, minor, and trace element concentrations were determined. ETV-ICP-OES analytical data were used to establish the type of glass, the fluxing agents, the typical coloring and decoloring elements, and the recipe norm.     

Improving Accessibility and Reactivity of Celluloses of Annual Plants for the Synthesis of Methylcellulose

Pretreatments (water-soaking, pre-mercerization, mercerization under a pressure of 15 bars and steam explosion) were used to improve the accessibilities and reactivities of celluloses of bleached flax, hemp, sisal, abaca and jute pulps for the synthesis of methylcellulose. Degrees of crystallinity were determined by X-ray Diffraction (XRD) spectra. The iodine adsorption accessibilities of pulps were low and accessible fractions ranged from 1.3 to 5.2%. Accessible fractions in amorphous cellulose were calculated in the 5–18% range. The accessibilities of these pulps were hemp pulp > flax pulp > sisal pulp > jute pulp > abaca pulp. Fourier Transform Infrared (FTIR) spectra showed that mean hydrogen bond strengths were weakened and relative crystallinity indexes were decreased by pretreatments. The accessibility and reactivity of the abaca pulp were improved by water soaking, mercerization under 15 bars pressure, steam explosion and preliminary mercerization, of which steam explosion and pre-mercerization were the best treatments. Species was the main factor for the accessibility and reactivity.     

CO2加氢合成二甲醚的催化剂的制备

先采用均匀沉淀法制备出CuO—ZnO催化剂,然后以CuO—ZnO催化剂作为晶核采用水热合成法制备出CuO—ZnO／HZSM-5（氢型ZSM-5分子筛）复合催化剂．利用X射线衍射和氨程序升温脱附手段对复合催化剂进行表征,并应用于CO2催化加氢合成二甲醚的反应．研究结果表明,在相同的反应条件下,这种CuO—ZnO／HZSM-5复合催化剂与采用物理混合法制备出的复合催化剂相比具有更好的催化效果,不但提高了CO2的转化率、二甲醚的选择性以及二甲醚和甲醇的总选择性,同时还改善了催化剂的稳定性．     

Determination of the additive physical properties of the components of complex mixtures

Summary The density, refractive index and absorptivities at chosen wave numbers were determined for all the components of three-component mixtures. The mixtures were treated of three-component mixtures. The mixtures were treated as being of unknown qualitative and quantitative composition. The quantitative gas chromatographic analysis by means of the method of linear relationship was carried out and the values of the physical properties of complex mixtures were measured. The corresponding properties of acetone, benzene and toluene were evaluated from the set of appropriate equations.     

分子三维投影法在苯酚类化合物构效关系研究中的应用

对苯酚类化合物进行三维投影得到了5个形状参数,将其与3个Am指数及8个量子化学参数相结合.由最佳变量子集回归法对变量进行了压缩与选择,运用多元回归分析和人工神经网络法分别构造了预测数学模型,得到了满意的结果.     

Resolution of uncertainty of a four-stage sequential extraction procedure using analysis of variance

Sequential extraction procedures are mostly applied to soils and sediments. Investigations were made for testing the applicability of a selected extraction scheme on spoil pile material. Therefore, different spoil pile samples from uranium mining were extracted into four steps (exchangeable, reducible, oxidizable, and aqua regia soluble phase) and the contents of the elements Cr, Cu, Fe, K, Ni, and Zn were analyzed. To substitute the sequential extraction by a sequence of single extractions and thus keep uncertainties of extraction on a low level, both procedures were compared regarding conformity of their results. The effects of sample handling as well as those of analysis on the measured metal contents were determined by means of analysis of variance and sources of uncertainties were discussed.     

系列甘露糖醛酸寡糖的制备与鉴定

用酸降解法制备了系列甘露糖醛酸寡糖(聚合度2～8),并分析测定了寡糖的结构. 褐藻胶经部分酸水解,于pH=2.85处分级获得聚甘露糖醛酸. 继续用酸降解法降解聚甘露糖醛酸,经凝胶柱层析分离纯化,获得系列甘露糖醛酸寡糖. 用荧光标记糖电泳(FACE)对寡糖进行了分析,并用电喷雾离子化质谱(ESI-MS)、 核磁共振波谱(NMR)及红外光谱(FTIR)进行了结构表征. 本研究用酸降解法制备饱和甘露糖醛酸寡糖,用凝胶柱层析法分离获得系列聚合度的寡糖,为褐藻胶大分子构效关系研究和药物的筛选与发现提供了重要的基础资料.     

Kinetics of combustion of oil shale with polystyrene

The combustion kinetics of Göynük oil shale, polystyrene and several polystyrene-oil shale blends were investigated by thermogravimetric analysis in the present study. Experiments were conducted at non-isothermal conditions with a heating rate of 5, 10 and 20 K min^?1 in the 298–1173 K temperature interval under an air atmosphere. Differential thermogravimetric data were analyzed by two different models. Effects of blending ratio of oil shale and polystyrene and heating rate on the combustion kinetics were investigated. Kinetic parameters were determined and the results were discussed.     

Dependence of structure of dehydrated PVA on the crystallinity of the original PVA

Poly(vinyl alcohol) (PVA) films having different crystallinities were prepared by elongating PVA films to different degrees and heating the films with and without elongation treatment at several temperatures between 60 and 200°C. Then, they were dehydrated by heating from 80°C to 230 or 330°C in hydrogen chloride gas. Infrared spectral measurements were made on the dehydrated PVA films obtained. Absorbances of the absorption bands due to several groups seen in the infrared spectra depended only on the density of original PVA films, regardless of its degree of elongation. From these dependences, it was found that the dehydration reaction progressed more easily in the crystalline region than in the amorphous region, that the aromatic rings with four or five adjacent hydrogen atoms were formed mainly in the amorphous region and those with two adjacent hydrogen atoms in the crystalline region, and that the aromatic rings with two isolated hydrogen atoms were formed in both the amorphous and crystalline regions. Relative concentrations of the groups of which the dehydrated PVA were composed were estimated. Comparison of the numbers of carbon atoms among the composing groups indicated that the main groups were the methylene group and the aromatic ring.     

碳苷研究 V: 用Grignard试剂合成取代苯酚中酚羟基的保护及脱保护

本文报道了一些取代苯酚的合成, 并探讨了用Grignard试剂合成取代苯酚中酚羟基的保护及脱保护的问题. 利用苄基和甲基作为酚羟基的保护基, 对文献报道的切断醚键脱保护方法进行了评价. 找到了两种新体系能在更温和条件下切断醚键的方法, 指出了它们的适用条件. 实验结果符合硬软酸碱理论.     

广东省高校大学生膳食调查及营养配餐推荐

本调查报告采用问卷法了解广东主要高校大学生一周内熟食进食量及用餐情况，计算出每人每日热量和各种营养素的摄人量，采用Microsoft Excel软件进行数据处理和统计分析，并用中国营养学会制订的DRIs(膳食营养素参考摄人量)和中国居民膳食指南及平衡膳食宝塔进行比较分析，且通过微量元素检测对结果进行了验证，最后提供了为期一周的营养配餐作为膳食参考。主要调查结果如下：男女生的蛋白质、尼克酸、维生素C、维生素E、碘和男生锰的摄入量已经满足人体需要。男生铁和锰的摄入量基本满足需要。男女生的能量、脂肪、膳食纤维、维生素A、硫胺素、核黄素、钙、锌的摄人量都不足，且女生铁的摄人量同样不足。男女生一日三餐热量分配结构十分不平衡，早餐的热量摄入均偏低，膳食结构也不合理。在分析广东省大学生膳食状况的基础上，推出五套营养配餐方案供高校膳食部门和大学生参考选用。     

Investigation of the possible role of fatty acids and alcohols as precursors of normal hydrocarbons generated during vacuum pyrolysis of a young kerogen

Significant amounts of fatty acids and alcohols, in addition to straight-chain hydrocarbons, were observed in the vacuum pyrolysate of a young kerogen isolated from a fresh-water sediment. The amounts and the distribution patterns of fatty acids and alcohols were compared with those indigenous to the original kerogen, as determined by solvent extraction followed by saponification extraction. Straight-chain fatty acids in the pyrolysate were 12.7 mg/g kerogen, while those extracted from the original kerogen were 10.5 mg/g. The amounts of fatty alcohols in the pyrolysate and in the extracts were 1.31 and 1.10 mg/g. respectively. The excess amounts in the pyrolysate were explained by the release of a strictly bound form of fatty acids and alcohols, which were left in the kerogen matrix even after the saponification extraction. The results indicated that most fatty acids and alcohols were not decomposed as a result of the vacuum pyrolysis and that neither fatty acids nor fatty alcohols should be viewed as the prime precursors of the straigth-chain hydrocarbons (4.6 mg/g) simultaneously generated during vacuum pyrolysis.     

广西产马尾松与湿地松针叶精油化学成分的比较

用水蒸气蒸馏法从广西产马尾松和湿地松的针叶中提取精油,探索了松针投料量和提取时间对产油率的影响,确定了最佳工艺条件为：松针投料量700 g,提取时间5 h。在此最佳条件下马尾松和湿地松针叶的产油率分别为0.45%和0.19%。用气相色谱（GC）和气相色谱-质谱（GC-MS）等方法分别对两树种的针叶精油进行了定量和定性分析,从马尾松针叶精油中分离出64种化学成分,鉴定了其中的20种成分,占挥发油总量的98.59%;从湿地松针叶精油中分离出73种化学成分,鉴定了其中的29种成分,占挥发油总量的94.23%。两树种针叶精油的主要化学成分大致相同,但在含量上有较大差别。马尾松针叶精油中α-蒎烯的含量约为湿地松的2.6倍,但其β-蒎烯含量低于后者。单萜和倍半萜是构成马尾松和湿地松针叶精油的主要成分。     

Properties of aqueous solutions containing blends of poly-N-vinylformamide with carboxymethyl cellulose of various degrees of ionization and of composite films of these polymers

Rheological properties of mixtures of dilute and moderately concentrated aqueous solutions of poly-N-vinylformamide and carboxymethyl cellulose of various degrees of ionization were studied. Composite film materials were prepared, and their physicomechanical properties and structural organization were studied.     

大黄药材指纹图谱研究

采用高效液相色谱法,Hypersil ODS柱,甲醇-1．0%冰醋酸为梯度流动相,研究了大黄的指纹图谱,其中大黄酸、大黄素、大黄酚、大黄素甲醚、芦荟大黄素作为为参照物,并对它们进行了含量测定．检测波长：430nm．共找出了23个共有峰,其中的5个峰是参照物,12个样品之间的相似度在90％以上．样品处理方法简单,研究所得的大黄指纹图谱稳定性、重复性好,可作为大黄药材的特征指纹图谱．     

Evaluation of flow properties of dry powder inhalation of salbutamol sulfate with lactose carrier

The effects of the flow and packing properties of a drug/carrier powder mixture on emission of drug adhering to the carrier from capsules and inhalation devices were investigated. Model powder mixtures were designed consisting of lactose carriers with different particle shapes were prepared by surface treatment and micronized salbutamol sulfate. These powder mixtures were aerosolized by a Spinhaler, and in vitro deposition properties of salbutamol sulfate were evaluated by a twin impinger. The flow properties of the mixed powders were evaluated by the Carr's flowability index (FI) and Hausner's ratio (HR). The packing properties of the mixed powders were determined employing the tapping method. Compared with the powder mixed with the untreated lactose carrier, the FI, HR, and the constant K in Kawakita's equation of the powder mixture prepared using the surface-treated lactose carrier were significantly different, showing that the flow and packing properties of the drug/carrier powder mixture were improved. Using this surface-treated system, the handling of the powder mixture when packing into capsules is improved, which is desirable for handling dry powder inhalants. The fraction (%) of drug emitted from capsules and devices (EM) and the FI of the powder mixture were correlated. As the flow properties improved, the outflow of the powder mixture from capsules and devices became easier, and emission of drug adhering on the carrier from capsules and devices improved. Improvement of the inhalation process, such as the drug particles emitted from the inhalation system, is valuable for increasing inhalation properties of dry powder inhalation.     

Investigation of Cyclodextrin Complexes of Mandelic acid

The inclusion complexes of both optically active and racemic mandelic acids with α-, (β- and γ-cyclodextrins were prepared by using a liophylisation technique. The compounds formed were investigated by thermoanalytical methods (TG, DSC and EGD) which were completed with FT-IR spectroscopic measurements, scanning electron microscopic observations, and dissolution rate determinations. The inclusion complex formation between all guests and hosts were proven using the thermoanalytical and FT-IR spectroscopic methods.     

Development of certified reference samples of solutions of trihalomethanes

A method for the metrological certification of reference samples (RS) of solutions of organic compounds was proposed. The method is based on a procedure of sample preparation that uses both calculated and experimental data and involves the evaluation of the purity of the reagents employed. Impurity components were identified. Procedures for the determination of impurity components in source materials by gas chromatography with flame-ionization detection were developed. Calibration coefficients for halogen-containing impurity components in reference to an internal standard were determined experimentally or calculated. Certified reference samples of solutions of trichloromethane, bromodichloromethane, dibromochloromethane, and tribromomethane were designed for the quality control of drinking water