石墨颗粒/CuAlMn形状记忆合金复合材料中的位错内耗峰

利用渗流技术制备出了以石墨颗粒为阻尼增强相、以Cu-11.9Al-2.5Mn(wt%)形状记忆合金为基体的复合材料，对该合金的内耗行为进行了研究. 在淬火态样品的内耗-温度曲线上观察到两个内耗峰，分别位于240 ℃和370 ℃附近. 对其中低温峰的变化规律和机理进行了研究. 实验发现，低温峰仅在复合材料中出现，峰位与频率无关，峰高随频率升高而上升；随升温速率增加，峰高增加，峰位移向高温；随石墨颗粒体积分数增加，峰高增加；经多次热循环后该内耗峰消失. 由以上特征和微观观察，可以证明该峰起因于外加交变应力与位错的相互作用.     

与位错和点缺陷的交互作用有关的低温内耗峰

系统研究了出现在经冷加工处理的Al-Mg固溶体中的低温内耗峰。当测量频率约为1Hz时,分别在-70℃(P_L2峰)和-50℃(P_L1峰)观察到了两个内耗峰。详细研究了镁(Mg)含量,冷加工量,冷加工模式,不同合金元素(Ga,Zn),退火等诸因素对这两个内耗峰的出现及特性的影响。得出了P_L2峰与位错和“Mg原子-双空位”对的交互作用有关以及P_L1峰与位错和“Mg原子-单空位”对的交互作用有关的结论。 关键词：     

高纯铝中的反常位错内耗

本文对高纯铝的应变时效内耗行为以及所表现出的振幅效应进行研究。在一定的扭转形变以后内耗表现出反常振幅效应,这一效应在较宽的温区都可观察到,但在完全退火或拉伸形变的试样中不出现。扭转形变的方式对振幅效应有影响。纯度越低,越不易观察到这一效应。本文认为反常振幅效应的出现归因于形变导致位错密度过高,位错可动的范围较小,从而消耗的能量不再随应力显著增大。室温下时效内耗的增大可能是形变引入的空位帮助位错滑移所引起的。 关键词：     

位错芯区扩散引起的非线性滞弹性内耗峰

若干年来,我们对于出现在Al-Cu和Al-Mg系中的表现正常和反常振幅效应的坐落在室温附近的内耗峰进行了系统研究,测得的激活能接近于溶质原子在位错管道中扩散的激活能，从而认为内耗峰的基本过程是溶质原子在隹错芯内的扩散，并且提出了根据位错弯结模型的物理图像。在70年代，Windler-Gniewek等根据弦模型对于位错芯内的扩散进行了理论计算，推导出描述内耗行为的数学表达式与我们的实验结果有许多相似之处。本文对于弦模型和弯结模型进行了对比，分析了位错芯内的纵向扩散和横向扩散所引起的内耗的非线性表现以及内耗峰温和峰高随着应变振幅和测量温度而变化的情况，进一步了我们发现的室温非线性内耗峰（非线性滞弹性内耗）是由于溶质原子在位错芯内扩散所引起的。 关键词：     

从铝合金的应变时效内耗考察位错与点缺陷的交互作用

研究了合金含量、合金元素和形变条件对铝合金应变时效内耗行为的影响．由此描述了点缺陷的分布状态和位错组态；指出了控制应变时效回复过程的因素是溶质原子的动性和溶质原子与位错的作用能。提出了能描述应变时效过程中位错─—点缺陷交互作用的位错弦脱钉和位错气团拖曳共同作用的复合模型，相应的理论处理合理地解释了实验现象。 关键词：     

形变过程内耗

形变过程内耗是在生形变进行过程中测出的内耗，文章介绍了形变过程内耗的测量方法和目前人们对这种内耗的实验规律和微观体制的认识以及它可能提供的关于形变微观过程的知识。     

6066Al/SiC_p复合材料内耗性能研究

用粉末冶金方法制备了6066Al合金和不同SiCp含量的6066Al/SiCp复合材料,用多功能内耗仪在200~600 K温度区间内测试了所研究材料在升温过程中的内耗变化趋势,探讨了6066 Al/SiCp复合材料在不同温度区间的内耗机制。结果表明6066Al/SiCp的内耗值比6066Al合金内耗值高,特别是在高温阶段比6066Al合金内耗值高得多;6066Al/SiCp和6066Al合金在300~470 K时的内耗主要是位错与第二相颗粒交互作用引起的位错内耗,在高温下内耗主要由Al/Al、Al/SiC的界面微滑移引起。     

6066Al/SiCp复合材料内耗性能研究

用粉末冶金方法制备了6066Al合金和不同SiCp含量的6066Al／SiCp复合材料，用多功能内耗仪在200～600K温度区间内测试了所研究材料在升温过程中的内耗变化趋势，探讨了6066Al／SiCp复合材料在不同温度区间的内耗机制。结果表明6066Al／SiCp的内耗值比6066Al合金内耗值高，特别是在高温阶段比6066Al合金内耗值高得多；6066Al／SiCp和6066Al合金在300-470K时的内耗主要是位错与第二相颗粒交互作用引起的位错内耗，在高温下内耗主要由Al／Al、Al／SiC的界面微滑移引起。     

6066Al/SiCp复合材料内耗性能研究

用粉末冶金方法制备了6066Al合金和不同SiCp含量的6066Al/SiCp复合材料,用多功能内耗仪在200～600 K温度区间内测试了所研究材料在升温过程中的内耗变化趋势,探讨了6066 Al /SiCp复合材料在不同温度区间的内耗机制.结果表明6066Al/SiCp的内耗值比6066Al合金内耗值高,特别是在高温阶段比6066Al合金内耗值高得多;6066Al/SiCp和6066Al合金在300～470 K时的内耗主要是位错与第二相颗粒交互作用引起的位错内耗,在高温下内耗主要由Al/Al、Al/SiC的界面微滑移引起.     

面心立方金属和合金中的碳内耗峰

本文从理论上和实验上总结和阐明了面心立方金属和合金中碳内耗峰的物理机构,以间隙碳-空位碳原子对模型来解释面心纯金属中的碳内耗峰,以MV-CC,金属原子(M)-空位碳(V-C)-间隙碳(C),原子团模型来说明面心合金中的碳峰。     

快冷Fe71Al29合金中的两个内耗峰

用一个计算机控制的倒扭摆研究了快冷Fe71Al29合金中的两个内耗峰.在快冷的Fe71Al29样品中分别在180℃(P1)，340 ℃(P2)和510℃(P3)出现了内耗峰，而在慢冷的Fe71Al29样品中只发现了P3峰.快冷样品中的P1和P2峰在从650℃冷却下来的测量过程中或在350℃经过较长时间的时效后消失，其峰高随时效时间的增加 而下降，直至消失.P1和P2峰都有弛豫特征，它们的激活能分别为：H1=1．03±0．08eV(P1峰)；H2=1．64±0．05eV(P2峰).P1峰被认为是无序合金中Al原子在四面体点阵内的最近邻运动所引起，P2峰则是无序合金中Al原子在四面体点阵内的次近邻运动所引起. 关键词： Fe-Al合金 内耗     

快冷Fe_(71)Al_(29)合金中的两个内耗峰

用一个计算机控制的倒扭摆研究了快冷Fe71 Al2 9合金中的两个内耗峰 .在快冷的Fe71 Al2 9样品中分别在 180℃(P1 ) ,340℃ (P2 )和 5 10℃ (P3)出现了内耗峰 ,而在慢冷的Fe71 Al2 9样品中只发现了P3峰 .快冷样品中的P1 和P2峰在从 6 5 0℃冷却下来的测量过程中或在 35 0℃经过较长时间的时效后消失 ,其峰高随时效时间的增加而下降 ,直至消失 .P1 和P2 峰都有弛豫特征 ,它们的激活能分别为 :H1 =1.0 3± 0 .0 8eV(P1 峰 ) ;H2 =1.6 4± 0 .0 5eV(P2 峰 ) .P1 峰被认为是无序合金中Al原子在四面体点阵内的最近邻运动所引起 ,P2 峰则是无序合金中Al原子在四面体点阵内的次近邻运动所引起     

冲击诱发NiTi形状记忆合金相变行为研究

NiTi形状记忆合金的高应变动态响应特性在军事、航空等领域具有重要应用.为研究NiTi合金在动态力学诱导下的相变行为,在不同温区不同冲击速率下,通过轻气炮装置对NiTi合金进行了动态加载实验.利用差示扫描量热仪(DSC),综合物性测量系统分析了冲击波残余效应对NiTi合金相变行为的影响.研究发现:受冲击的样品在第一次DSC热循环中观察到了三个马氏体吸热峰,表现为三步逆马氏体相变,而在第二次热循环中其中两个应力诱发马氏体吸热峰因变形恢复消失.形成两个应力诱发马氏体吸热峰的原因可能是晶粒内部与晶界处的相变过程不同步.受冲击后样品DSC放热峰上出现了一小肩峰,表明可能因中间相(R相)的出现而发生了两步相变,结合电阻测量曲线进一步确认R相的存在,且发现奥氏体相向R相转变以及R相向马氏体相转变这两种相变过程在某一温度范围内可同时进行.同时,文中也具体讨论了不同的冲击加载条件对相变过程的影响.     

Graphene sensing an inhomogeneous strain due to the surface relief in FeNiCoTi shape memory alloy

In this paper, we present a novel method of using graphene for sensing the inhomogeneous strain due to the surface relief in FeNiCoTi shape memory alloy. In the experiment, a large sheet of graphene fabricated by chemical vapor deposition was transferred onto the FeNiCoTi substrate. The flat surface of the substrate would become wrinkled due to the surface relief formed during the FeNiCoTi substrate phase transformation, meanwhile loading a tensile strain on the surface graphene. It is found that the 2D Raman peak of graphene demonstrates a significant red shift due to the tensile strain. The different colors exhibited in the Raman mapping image of the graphene directly displayed the strain distribution information across the surface. In the future, we may alter to quantitatively analyze the surface relief by using Raman spectroscopy instead of the atomic force microscopy. Copyright © 2013 John Wiley & Sons, Ltd.     

Zn-Al二元合金熔化过程的低频内耗研究

利用强迫振动扭摆方法对ZnAl二元合金熔化过程的低频内耗进行了研究.结果表明,ZnAl二元合金熔化过程的内耗峰与其固态相变内耗峰的特征有较大差异.结合该合金熔化过程的微观结构变化,初步分析了内耗峰的形成机理. 关键词： Zn-Al合金 低频内耗 熔化     

A macro-mechanical constitutive model of shape memory alloys

It is of practical interest to establish a precise constitutive model which includes the equations describing the phase transformation behaviors and thermo-mechanical processes of shape memory alloy (SMA). The microscopic mechanism of super elasticity and shape memory effect of SMA is explained based on the concept of shape memory factor defined by the author of this paper. The conventional super elasticity and shape memory effect of SMA are further unified as shape memory effect. Shape memory factor is redefined in order to make clear its physical meaning. A new shape memory evolution equation is developed to predict the phase transformation behaviors of SMA based on the differential relationship between martensitic volume fraction and phase transformation free energy and the results of DSC test. It overcomes the limitations that the previous shape memory evolution equations or phase transformation equations fail to express the influences of the phase transformation peak temperatures on the phase transformation behaviors and the transformation from twinned martensite to detwinned martensite occurring in SMA. A new macro-mechanical constitutive equation is established to predict the thermo-mechanical processes realizing the shape memory effect of SMA from the expression of Gibbs free energy. It is expanded from one-dimension to three-dimension with assuming SMA as isotropic material. All material constants in the new constitutive equation can be determined from macroscopic experiments, which makes it more easily used in practical applications. Supported by the National Natural Science Foundation of China (Grant No. 95505010), the National High Technology Research and Development Program of China (Grant No. 2006AA03Z109), the China Postdoctoral Science Foundation (Grant No. 20080430933), the Open Foundation of Institute of Engineering Mechanics of National Seism Bureau of China (Grant No. 2007B02), and the Harbin Talent Foundation of Scientific and Technical Innovation (Grant No. RC2009QN-017046)     

Magnetoresistance in ferromagnetic shape memory alloy NiMnFeGa

The magnetoresistance (MR){=[R(H)−R(0)]/R(0)} properties in ferromagnetic shape memory alloy of NiMnFeGa ribbons and single crystals, and NiFeGa ribbons have been investigated. It is found that the NiMnFeGa melt-spun ribbon exhibited GMR effect, arising from the spin-dependent scattering from magnetic inhomogeneities consisting of antiferromagnetically coupled Mn atoms in B2 structure. In the absence of these magnetic inhomogeneities, Heusler alloys seem to show a common linear MR behavior at around 0.8T_C, regardless of sample structures. This may be explained by the s-d model. At low temperatures, conventional AMR behaviors due to the spin-orbital coupling are observed. This is most likely due to the diminished MR from s-d model because of much less spin fluctuation, and is not associated with martensite phase. MR anomaly at intermediate field (ρ_⊥>ρ_||) is also observed in single crystal samples, which may be related to unique features of Heusler alloys.     

18 MeV质子辐照对TiNi形状记忆合金R相变的影响

研究了用HZ B串列加速器的18MeV质子辐照对TiNi形状记忆合金R相变的影响,辐照在奥氏体母相状态下进行。示差扫描量热法(DSC)表明,辐照后R相变开始温度TsR和逆马氏体相变结束温度TfA随辐照注量的增加而降低。当注量为1.53×1014/cm2时,TsR和TfA分别下降6K和13K,辐照未引起R相变结束温度TfR和逆马氏体相变开始温度TsA的变化。表明辐照后母相(奥氏体相)稳定。透射电镜(TEM)分析表明辐照后没有引起合金可观察的微观组织变化。辐照对R相变开始温度TsR和逆马氏体相变结束温度Af的影响可能是由于质子辐照后产生了孤立的缺陷团,形成了局部应力场,引起晶格有序度的下降所造成的。     

Finite element simulation of the magneto-mechanical response of a magnetic shape memory alloy sample

Abstract

In this paper, the stress- and magnetic field-induced variant reorientation in a magnetic shape memory alloy (MSMA) sample is simulated by using the finite element method. This model is set up based on a three-dimensional setting with the whole sample and the surrounding space taken into account. A typical loading pattern is proposed on the sample. The unknowns of the model governing system include the spatial displacement vector, the scalar magnetic potential and some internal variables related to the effective magnetization vector. By considering the different properties of the unknowns, an iterative computational scheme is proposed to derive the numerical solutions. With the obtained solutions, the magneto-mechanical response of the MSMA sample under different field and stress levels can be predicted. The distributions of the variant state and the effective magnetization in the sample can also be determined. By comparing with the experimental results, it is found that the numerical solutions obtained in this model can predict the response of the MSMA sample at a quantitative level.