Truck trip generation in small- and medium-sized urban areas

This paper describes procedures to develop truck trip generation (TTG) rates for small- and medium-sized urban areas and its implications. Ordinary least squares models are used to develop separate truck production and attraction equations with the number of employees as the independent variable for three industrial groups – retail, transportation and warehousing, and manufacturing. Results from this research indicate that number of employees is a statistically significant predictor, and has significant explanatory power in predicting the number of truck trips produced and attracted. The rates developed in this study are also found to be significantly different from rates developed in other studies with the implication that caution needs to be taken when transferring TTG rates. The rates are applied in a travel demand model as the initial step of incorporating truck traffic into the modeling process.     

A model for national freight flows,distribution centers,empty trucks and urban truck movements

Trucks travel both short distances for local deliveries and long distances for transporting goods across the country. Often their travel behavior is tour-based, they run under tight schedules and under curfew on selected roads. Despite these differences from personal travel, in practice truck models largely follow person travel methods. To overcome this shortcoming, a two-layer truck model is developed for the Chicago Metropolitan Area. Long-distance trucks are driven by commodity flows, with distribution centers, rail yards, marine ports and airports being represented explicitly. Empty trucks are accounted for as well. For the short-distance truck model, a novel parameter estimation method makes use of limited data to derive region-specific parameters. The model is fully operational and validates reasonably well against traffic counts.     

Integrated data-driven modeling to estimate PM2.5 pollution from heavy-duty truck transportation activity over metropolitan area

Based on the national emission inventory data from different countries, heavy-duty trucks are the highest on-road PM_2.5 emitters and their representation is estimated disproportionately using current modeling methods. This study expands current understanding of the impact of heavy-duty truck movement on the overall PM_2.5 pollution in urban areas through an integrated data-driven modeling methodology that could more closely represent the truck transportation activities. A detailed integrated modeling methodology is presented in the paper to estimate urban truck related PM_2.5 pollution by using a robust spatial regression-based truck activity model, the mobile source emission and Gaussian dispersion models. In this research, finely resolved spatial–temporal emissions were calculated using bottom-up approach, where hourly truck activity and detailed truck-class specific emissions rates are used as inputs. To validate the proposed methodology, the Cincinnati urban area was selected as a case study site and the proposed truck model was used with U.S. EPA’s MOVES and AERMOD models. The heavy-duty truck released PM_2.5 pollution is estimated using observed concentrations at the urban air quality monitoring stations. The monthly air quality trend estimated using our methodology matches very well with the observed trend at two different continuous monitoring stations with Spearman’s rank correlation coefficient of 0.885. Based on emission model results, it is found that 71 percent of the urban mobile-source PM_2.5 emissions are caused by trucks and also 21 percent of the urban overall ambient PM_2.5 concentrations can be attributed to trucks in Cincinnati urban area.     

Quantifying the effects of input aggregation and model randomness on regional transportation emission inventories

Accurate road-traffic emission inventories are of great interest to metropolitan planning agencies especially in the appraisal of regional transport policies. Integrated road transport emission models are an effective means of establishing emission estimates, yet their development requires significant investments in data and resources. It is therefore important to investigate which data inputs are the most critical to inventory accuracy. To address this issue, an integrated transport and emissions model is developed using the Montreal metropolitan region as a case-study. Daily regional hydrocarbon (HC) emissions from private individual travel are estimated, including the excess emissions due to engine starts. The sensitivity of emission estimates is then evaluated by testing various levels of input aggregation common in practice and in previous research. The evaluated inputs include the effect of start emissions, ambient weather conditions, traffic speed, path choice, and vehicle registry information. Inherent randomness within the integrated model through vehicle selection and path allocation is also evaluated. The inclusion of start emissions is observed to have the largest impact on emission inventories, contributing approximately 67 % of total on-road HC emissions. Ambient weather conditions (season) and vehicle registry data (types, model years) are also found to be significant. Model randomness had a minimal effect in comparison with the impact of other variables.     

Temporal disaggregation of travel demand for high resolution emissions inventories

The commonly used photochemical air quality model, the Urban Airshed Model (UAM), requires emission estimates with grid-based, hourly resolution. In contrast, travel demand models, used to simulate the travel activity model inputs for the transportation-related emissions estimation, typically only provide traffic volumes for a specific travel period (e.g. the a.m. and p.m. peak periods). A few transportation agencies have developed procedures to allocate period-based travel demand data into hourly emission inventories for regional grid cells. Because there was no theoretical framework for disaggregating period-based volumes to hourly volumes, application of these procedures frequently relied upon a single hypothetical hourly distribution of travel volumes. This study presents a new theoretical modeling framework that integrates traffic count data and travel demand model link volume estimates to derive intra-period hourly volume estimates by trip purpose. We propose a new interpretation of the model coefficients and define hourly allocation factors by trip purpose. These allocation factors can be used to disaggregate the travel demand model ‘period-based’ simulation volumes into hourly resolution, thereby improving grid-based, hourly emission estimates in the UAM.     

Delay-based passenger car equivalents for trucks at signalized intersections

This paper presents a new methodology for computing passenger car equivalents at signalized intersections that is based on the delay concept. Unlike the commonly used headway-based methods that consider only the excess headway consumed by trucks, the delay-based approach fully considers the additional delay heavy vehicles cause on traffic stream. Delay-based passenger car equivalents are not constant, but depend on traffic volume, truck type and truck percentage. The field data indicated that the passenger car equivalents increase as the traffic volume and the percentage of heavy vehicles increase. The field data were used to calibrate TRAF-NETSIM simulation model that was used to cover a broad range of traffic conditions. Mathematical models to estimate the equivalencies were developed. The passenger car equivalent for single unit trucks vary from 1.00 to 1.37, and for combination trucks 1.00–2.18 depending on traffic volume and truck percentage. The passenger car equivalents are highly correlated with traffic volume and, to some degree, with percentage of heavy vehicles. Although the PCE of 1.5 recommended in the 1985 HCM seems to be more reasonable than the 2.0 recommended in the 1994 and 1997 HCM, both overestimate the impact of single unit trucks. For combination trucks, the 1997 HCM overestimates the capacity reduction effects of the trucks in most cases.     

Truck platooning on uphill grades under cooperative adaptive cruise control (CACC)

This paper examines CACC truck platooning on uphill grades. It was found that the design of CT policy should consider the effects of low crawl speeds on significant upgrades. Three simple solutions, which have different impacts on traffic flow efficiency, are proposed. Furthermore, truck platoons, controlled by a state-of-the-art CACC model, become asymptotically unstable beyond some critical grade. The errors are permanent, suggesting that trucks fail to re-engage after the upgrade. This occurs by complex interactions between the CACC control and the bounded acceleration capabilities of trucks. New control concepts are developed to complement the existing control model and achieve asymptotic (and string) stability. The instability mechanisms and new control concepts are not specific to the control model used.     

Assessment of the effects of highway geometric design features on the frequency of truck involved crashes using bivariate regression

Given the enormous losses to society resulting from large truck involved crashes, a comprehensive understanding of the effects of highway geometric design features on the frequency of truck involved crashes is needed. To better predict the occurrence probabilities of large truck involved crashes and gain direction for policies and countermeasures aimed at reducing the crash frequencies, it is essential to examine truck involved crashes categorized by collision vehicle types, since passenger cars and large trucks differ in dimensions, size, weight, and operating characteristics. A data set that includes a total of 1310 highway segments with 1787 truck involved crashes for a 4-year period, from 2004 to 2007 in Tennessee is employed to examine the effects that geometric design features and other relevant attributes have on the crash frequency. Since truck involved crash counts have many zeros (often 60–90% of all values) with small sample means and two established categories, car-truck and truck-only crashes, are not independent in nature, the zero-inflated negative binomial (ZINB) models are developed under the bivariate regression framework to simultaneously address the above mentioned issues. In addition, the bivariate negative binomial (BNB) and two individual univariate ZINB models are estimated for model validation. Goodness of fit of the investigated models is evaluated using AIC, SBC statistics, the number of identified significant variables, and graphs of observed versus expected crash frequencies. The bivariate ZINB (BZINB) models have been found to have desirable distributional property to describe the relationship between the large truck involved crashes and geometric design features in terms of better goodness of fit, more precise parameter estimates, more identified significant factors, and improved predictive accuracy. The results of BZINB models indicate that the following factors are significantly related to the likelihood of truck involved crash occurrences: large truck annual average daily traffic (AADT), segment length, degree of horizontal curvature, terrain type, land use, median type, lane width, right side shoulder width, lighting condition, rutting depth (RD), and posted speed limits. Apart from that, passenger car AADT, lane number, and indicator for different speed limits are found to have statistical significant effects on the occurrences of car-truck crashes and international roughness index (IRI) is significant for the predictions of truck-only crashes.     

Estimation of road transport related air pollution in Saint Petersburg using European and Russian calculation models

The paper analyzes Russian and European emission and dispersion models aimed at the estimation of road transport related air pollution on street and regional scale as exemplified with St. Petersburg, Russia. It demonstrates the results of model calculations of peak concentrations of main harmful substances (NО_X, CO and PM₁₀) along the St. Petersburg Ring Road at high traffic volume and adverse meteorological conditions (calm, temperature inversion) executed by means of a Russian street pollution model, and it evaluates the computed results against the measurements from monitoring stations. The paper also examines the ways of adaptation of the COPERT IV model – a software tool for calculation of air pollutant and greenhouse gas emissions from road transport on regional or country scale – to the inventory conditions of the Russian Federation, compares the COPERT IV numerical estimates with the national inventory data. It also reveals the obstacles and possibilities in the harmonization of the Russian and European approaches.     

Comparing rail fuel efficiency with truck and waterway

This paper presents a railroad energy efficiency model used to estimate the fuel economies for classes of trains transporting various commodities. Comparable procedures are used to estimate truck and waterway fuel consumption. The results show that coal unit trains are 4.5–5.0 times more energy efficient than movements in the largest trucks allowed in the eastern and western regions of the US, unit grain train movements in the central US are 4.6 times more fuel efficient, soda ash unit train and non-unit train shipments are 4.9 and 3.2 times more efficient, and ethanol unit train and non-unit train movements are 4.8 and 3.0 times more efficient. In terms of barge traffic, coal unit train and non-unit train are 1.3 and 0.9 times as energy efficient in the eastern US, grain unit train and non-unit train movements are 1.7 and 1.0 times more efficient from Minneapolis to the Gulf of Mexico, and grain unit train and non-unit train movements are 1.0 and 0.7 times more fuel efficient from the Upper Ohio River to the Gulf of Mexico.     

Development of an emissions inventory model for mobile sources

Traffic represents one of the largest sources of primary air pollutants in urban areas. As a consequence, numerous abatement strategies are being pursued to decrease the ambient concentrations of a wide range of pollutants. A mutual characteristic of most of these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emissions inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for a wide range of vehicle types. The majority of inventories are compiled using ‘passive’ data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. Current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this paper, a methodology for estimating emissions from mobile sources using real-time data is described. This methodology is used to calculate emissions of sulphur dioxide (SO₂), oxides of nitrogen (NO_x), carbon monoxide (CO), volatile organic compounds (VOC), particulate matter less than 10 μm aerodynamic diameter (PM₁₀), 1,3-butadiene (C₄H₆) and benzene (C₆H₆) at a test junction in Dublin. Traffic data, which are required on a street-by-street basis, is obtained from induction loops and closed circuit televisions (CCTV) as well as statistical data. The observed traffic data are compared to simulated data from a travel demand model. As a test case, an emissions inventory is compiled for a heavily trafficked signalized junction in an urban environment using the measured data. In order that the model may be validated, the predicted emissions are employed in a dispersion model along with local meteorological conditions and site geometry. The resultant pollutant concentrations are compared to average ambient kerbside conditions measured simultaneously with on-line air quality monitoring equipment.     

Fuel price elasticities for single-unit truck operations in the United States

This paper provides fuel price elasticity estimates for single-unit truck activity, where single-unit trucks are defined as vehicles on a single frame with either (1) at least two axles and six tires; or (2) a gross vehicle weight greater than 10,000 lb. Using data from 1980 to 2012, this paper applies first-difference and error correction models and finds that single-unit truck activity is sensitive to certain macroeconomic and infrastructure factors (gross domestic product, lane miles expansion, and housing construction), but is not sensitive to diesel fuel prices. These results suggest that fuel price elasticities of single unit truck activity are inelastic. These results may be used by policymakers in considering policies that have a direct impact on fuel prices, or policies whose effects may be equivalent to fuel price adjustments.     

Long distance truck tracking from advanced point detectors using a selective weighted Bayesian model

Truck flow patterns are known to vary by season and time-of-day, and to have important implications for freight modeling, highway infrastructure design and operation, and energy and environmental impacts. However, such variations cannot be captured by current truck data sources such as surveys or point detectors. To facilitate development of detailed truck flow pattern data, this paper describes a new truck tracking algorithm that was developed to estimate path flows of trucks by adopting a linear data fusion method utilizing weigh-in-motion (WIM) and inductive loop point detectors. A Selective Weighted Bayesian Model (SWBM) was developed to match individual vehicles between two detector locations using truck physical attributes and inductive waveform signatures. Key feature variables were identified and weighted via Bayesian modeling to improve vehicle matching performance. Data for model development were collected from two WIM sites spanning 26 miles in California where only 11 percent of trucks observed at the downstream site traversed the whole corridor. The tracking model showed 81 percent of correct matching rate to the trucks declared as through trucks from the algorithm. This high accuracy showed that the tracking model is capable of not only correctly matching through vehicles but also successfully filtering out non-through vehicles on this relatively long distance corridor. In addition, the results showed that a Bayesian approach with full integration of two complementary detector data types could successfully track trucks over long distances by minimizing the impacts of measurement variations or errors from the detection systems employed in the tracking process. In a separate case study, the algorithm was implemented over an even longer 65-mile freeway section and demonstrated that the proposed algorithm is capable of providing valuable insights into truck travel patterns and industrial affiliation to yield a comprehensive truck activity data source.     

Short-term prediction of border crossing time and traffic volume for commercial trucks: A case study for the Ambassador Bridge

Short-term forecasting of traffic characteristics, such as traffic flow, speed, travel time, and queue length, has gained considerable attention from transportation researchers and practitioners over past three decades. While past studies primarily focused on traffic characteristics on freeways or urban arterials this study places particular emphasis on modeling the crossing time over one of the busiest US–Canada bridges, the Ambassador Bridge. Using a month-long volume data from Remote Traffic Microwave Sensors and a yearlong Global Positioning System data for crossing time two sets of ANN models are designed, trained, and validated to perform short-term predictions of (1) the volume of trucks crossing the Ambassador Bridge and (2) the time it takes for the trucks to cross the bridge from one side to the other. The prediction of crossing time is contingent on truck volume on the bridge and therefore separate ANN models were trained to predict the volume. A multilayer feedforward neural network with backpropagation approach was used to train the ANN models. Predicted crossing times from the ANNs have a high correlation with the observed values. Evaluation indicators further confirmed the high forecasting capability of the trained ANN models. The ANN models from this study could be used for short-term forecasting of crossing time that would support operations of ITS technologies.     

Estimating fuel consumption and emissions based on reconstructed vehicle trajectories

Microscopic emission models are widely used in emission estimation and environment evaluation. Traditionally, microscopic traffic simulation models and probe vehicles are two sources of inputs to a microscopic emission model. However, they are not effective in reflecting all vehicles' real‐world operating conditions. Using each vehicle's spot speed data recorded by detectors, this paper provides a new method to estimate all vehicles' real‐world activities data. These data can then be used as inputs to a microscopic emission model to estimate vehicle fuel consumption and emissions. The main task is to reconstruct trajectory of each vehicle and calculate second‐by‐second speed and acceleration from the activities data. The Next Generation Simulation dataset and the Comprehensive Modal Emissions Model are used in this study to calculate and analyze the emission results for both lane‐level and link‐level. The results showed that using the proposed method for estimating vehicle fuel consumption and emissions is promising. Copyright © 2012 John Wiley & Sons, Ltd.     

Contrasting the direct use of data from traffic radars and video-cameras with traffic simulation in the estimation of road emissions and PM hotspot analysis

This study investigates the effect of traffic volume and speed data on the simulation of vehicle emissions and hotspot analysis. Data from a microwave radar and video cameras were first used directly for emission modelling. They were then used as input to a traffic simulation model whereby vehicle drive cycles were extracted to estimate emissions. To reach this objective, hourly traffic data were collected from three periods including morning peak (6–9 am), midday (11–2 pm), and afternoon peak (3–6 pm) on a weekday (June 23, 2016) along a high-volume corridor in Toronto, Canada. Traffic volumes were detected by a single radar and two video cameras operated by the Southern Ontario Centre for Atmospheric Aerosol Research. Traffic volume and composition derived from the radar had lower accuracy than the video camera data and the radar performance varied by lane exhibiting poorer performance in the remote lanes. Radar speeds collected at a single point on the corridor had higher variability than simulated traffic speeds, and average speeds were closer after model calibration. Traffic emissions of nitrogen oxides (NOx) and particulate matter (PM₁₀ and PM_2.5) were estimated using radar data as well as using simulated traffic based on various speed aggregation methods. Our results illustrate the range of emission estimates (NO_x: 4.0–27.0 g; PM₁₀: 0.3–4.8 g; PM_2.5: 0.2–1.3 g) for the corridor. The estimates based on radar speeds were at least three times lower than emissions derived from simulated vehicle trajectories. Finally, the PM₁₀ and PM_2.5 near-road concentrations derived from emissions based on simulated speeds were two or three times higher than concentrations based on emissions derived using radar data. Our findings are relevant for project-level emission inventories and PM hot-spot analysis; caution must be exercised when using raw radar data for emission modeling purposes.     

A multi-criteria decision support methodology for implementing truck operation strategies

This study proposes a multi-criteria decision support methodology to enable the prioritization of potential alternative transportation system operations strategies and then demonstrates the effectiveness of the methodology using a case study involving truck operations. The primary feature of this methodology is its ability to help policymakers consider economic, public, and private sector standpoints simultaneously. The economic criterion is cost to the public sector where four criteria related to truck impacts on the transportation system are incorporated. These are traffic congestion, safety hazards, air pollution, and pavement damage. In addition, reliability and productivity are regarded as metrics representing the private sector viewpoint since they can significantly affect profitability. The methodology combines qualitative and quantitative aspects of these standpoints. In order to demonstrate the applicability of this methodology, a corridor with some of the highest truck traffic in the US is selected as a case study and three forms of left lane restrictions for trucks are considered. For qualitative analysis, survey data were collected from two groups classified as public agency and transportation industry professionals who are experts in trucking. In addition, a micro traffic simulation model was used to produce various performance measurements that can describe quantitative impacts. As a result, the methodology provides a rational argument for prioritizing potential alternative truck strategies.     

Empirical analysis of short period traffic counts and their efficiency: the case of Indian traffic

Short period traffic counts (SPTCs) are conducted routinely to estimate the annual average daily traffic (AADT) at a particular site. This paper uses Indian traffic volume data to methodically and extensively study the effect of four aspects related to the design of SPTCs. These four aspects are: (i) for how long, (ii) on which days should SPTCs be carried out, (iii) how many times, and (iv) on which months should SPTCs be carried out? The analyses indicate that the best durations for conducting SPTCs are 3 days (starting with a Thursday) and 7 days, for total traffic and truck traffic, respectively. Further, these counts should be repeated twice a year keeping a separation of two months between the counts to obtain good estimates of AADT at minimal cost. An additional outcome of this study has been the determination of seasonal factor values for roads in developing economies, like India.     

Optimal tolls for multi-class traffic: Analytical formulations and policy implications

This paper puts together an analytical formulation to compute optimal tolls for multi-class traffic. The formulation is comprised of two major modules. The first one is an optimization component aimed at computing optimal tolls assuming a Stackelberg game in which the toll agency sets the tolls, and the equilibrating traffic plays the role of the followers. The optimization component is supported by a set of cost models that estimate the externalities as a function of a multivariate vector of traffic flows. These models were estimated using Taylor series expansions of the output obtained from traffic simulations of a hypothetical test case. Of importance to the paper is the total travel time function estimated using this approach that expresses total travel time as a multivariate function of the traffic volumes. The formulation presented in the paper is then applied to a variety of scenarios to gain insight into the optimality of current toll policies. The optimal tolls are computed for two different cases: independent tolls, and tolls proportional to passenger car equivalencies (PCE).The numerical results clearly show that setting tolls proportional to PCEs leads to lower values of welfare that are on average 15% lower than when using independent tolls, though, in some cases the total welfare could be up to 33% lower. This is a consequence of two factors. First, the case of independent tolls has more degrees of freedom than the case of tolls proportional to PCEs. Second, tolls proportional to PCEs do not account for externalities other than congestion, which is likely to lead to lower welfare values.The analytical formulations and numerical results indicate that, because the total travel time is a non-linear function of the traffic volumes, the marginal social costs and thus the optimal congestion tolls also depend on the traffic volumes for each vehicle class. As a result of this, for the relatively low volumes of truck traffic observed in real life, the optimal congestion tolls for trucks could indeed be either lower or about the same as for passenger cars. This stand in sharp contrast with what is implied in the use of PCEs, i.e., that the contribution to congestion are constant. This latter assumption leads to optimal truck congestion tolls that are always proportional to the PCE values.The comparison of the toll ratios (truck tolls divided by passenger car tolls) for both observed and optimal conditions suggests that the tolls for small trucks are about the right level, maybe a slightly lower than optimal. However, the analysis of the toll ratio for large trucks seems to indicate a significant overcharge. The estimates show that the average observed toll ratio for large trucks is even higher than the maximum optimal toll ratio found in the numerical experiments. This suggests that the tolls for large trucks are set on the basis of revenue generation principles while the passenger car tolls are being set based on a mild form of welfare maximization. This leads to a suboptimal cross-subsidization of passenger car traffic in detriment of an important sector of the economy.     

Characteristics of truck traffic in Singapore

This paper presents the results of a project conducted to study the characteristics of truck traffic in Singapore. Detailed traffic surveys recording counts of vehicles by axle-configuration were performed at 219 sites over a period of nearly two years. The surveys covered 5 different road classes, namely expressways, arterials, collectors, industrial roads and local roads. It was found that the time distribution of truck travel were not the same among the five road classes. The peaking characteristics of truck traffic were less pronounced compared to passenger car traffic. The peak hour truck volume varied from 67.0% to 9.7% of the daily truck traffic as compared to 13.8% for passenger car traffic. The lane distribution pattern of truck traffic was studied in detail by road class, and was found to be a function of total directional traffic volume, total directional truck volume and the number of traffic lanes. Composition analysis was also carried out to study the lane use characteristics of single- and multiple-unit trucks.