荆门市松材线虫病的防治与对策

荆门市马尾松、湿地松面积大,2016年境内确诊松材线虫病。自2016年以来,荆门市组织开展了松材线虫病防治工作。针对荆门市松材线虫病防治面临的困难和问题,提出了松材线虫病防治工作对策。     

短波

长顺县开展松材线虫病防治工作为切实搞好松材线虫病的预防和除治工作,坚决遏制其传入与扩散,确保全县40余万亩马尾松林生态系统的安全,近日,贵州省长顺县政府召开了全县松材线虫病预防和除治工作联席会议,县林业局局长李靖介绍了全县松材线虫病预防和除治工作的开展情况,副县长韦明刚通报     

遂昌县预防松材线虫病措施及对策

松材线虫病是松树的毁灭性病害,针对遂昌马尾松林的现实情况,阐述了松材线虫病预防的重要性和必要性,回顾了2000年以来预防松材线虫病所采用的措施和存在的问题,并提出了今后的预防对策。     

松材线虫病流行与松毛虫危害关系的研究

研究表明 :在松材线虫病发生区 ,其病害的扩展、流行与马尾松毛虫危害有着密切的关系。当年受马尾松毛虫危害的松林 ,枯死松树数量平均为 77 879株 /hm2 ,比未受松毛虫危害的松林 (对照 ) 17 2 73株 /hm2 ,多 35 1% ;次年 ,前者平均枯死松树达 2 0 4 8株 /hm2 ,为对照 2 89株 /hm2 的 6 0 8%。松毛虫危害加速松材线虫病流行的原因是 ,松毛虫危害松树 ,削弱树势 ;弱势的松树招引松墨天牛侵入并增殖加快松树死亡 ;次年大量天牛从“松毛虫危害松木”上羽化 ,侵染健康松林 ,导致松材线虫病进一步扩散和流行。由此认为松毛虫危害是促使松材线虫病流行的重要因子 ,防治松毛虫是控制松材线虫病流行的重要环节之一     

松材线虫病知识简介

我市濠江区自去年以来陆续发生松树枯死现象，经省权威机构鉴定确认为松材线虫病。松材线虫病是松材线虫寄生在松树体内所引起的一种毁灭性病害，主要危害马尾松、黑松、黄松、赤松、海岸松和黄山松等松属植物，在国际国内被列为重要的检疫对象。现将松材线虫病有关知识介绍如下：     

松材线虫病对安化县马尾松林的危险性及预防对策

从松材线虫病的分布情况、为害症状、发病特点等方面简述了其分布与危害特点;从松材线虫的寄主植物资源和病原传播媒介昆虫以及发生发展环境与传播方式等方面分析了安化县马尾松林松材线虫病发生与发展的可能性与危险性;并提出了监测与预防松材线虫病的对策.     

泉州市鲤城区松材线虫病持续治理对策初探

针对福建省泉州市鲤城区马尾松林的现状,阐述了2006年以来松材线虫病的发生情况,采取的防治措施及存在的问题,并提出松材线虫病持续治理对策。     

闽侯县松材线虫病发生及防控措施优化路径

福建省于2001年首次发现并确诊松材线虫病,现该病已先后扩散到省内的45个县级行政区,已造成局部地区马尾松大面积染病死亡。期间福建省加强防治责任落实,采取多种措施科学开展防治,先后拔除12个县级行政区疫区,用事实证明松材线虫病是可防可控的。闽侯县县域松林面积约4.533 3万hm2(含混交林),今后松材线虫病的防控压力仍然巨大。本文在闽侯县前期积极开展疫情防治的基础上,对松材线虫病防控措施进行阐述分析,探讨防控措施的优化路径,为今后闽侯县松材线虫病防控提供参考。     

马尾松对松材线虫病抗病性差异的研究进展

松材线虫病是松树的一种毁灭性病害,不同种源的马尾松的抗病性存在差异.就马尾松对松材线虫病的抗病性差异研究进展进行了综述.目前,马尾松抗病性的研究主要有以下5个方面:①不同树龄与抗病性之间的关系;②不同地理种源马尾松对松材线虫病抗病性的差异;③与种源抗病性有关的主要成分;④马尾松的诱导抗病性;⑤马尾松抗病育种.马尾松的抗病性与多种因素有关系,通常具有抗性的马尾松一般生长状况较好;马尾松的抗病物质很复杂,到目前为止,人们已经发现了马尾松的一些抗病物质的种类,并对这些物质的结构进行了研究,但对这些抗性物质的产生和马尾松抗病机理还有待于进一步的研究.     

十堰市林相改造路径及对策

摘要：松材线虫病因其致病性强、传播速度快、治理难度大等特性对中国多省市生态安全造成严重威胁。湖北省安陆市是松材线虫的适宜生长区，且易感松材线虫病的马尾松与传播媒介昆虫松褐天牛在该地区普遍分布。近几年，安陆市松材线虫病疫情发生面积年均约400hm2。在调查安陆市松材线虫病的发生现状，并对当前存在问题进行阐述与分析，从防止疫情扩散与防治层面提出遏制松材线虫病扩散和蔓延的对策。     

Browsing Damage on Pine (Pinus sylvestris and P. contorta) by a migrating moose (Alces alces) Population in Winter: Relation to Habitat Composition and Road Barriers

In Scandinavia, moose (Alces alces L.) sometimes cause severe browsing damage to economically-important pine. Moose-vehicle accidents have spurred construction of fences along roads, and these may interfere with moose migration between summer and winter ranges, or the road alone may be a barrier. If this happens and moose build up along roads, landowners may suffer economically. Therefore, this study investigated whether roads, fences or other factors influence the use of young pine stands by moose. Eighty stands along roads in northern Sweden were evaluated in which individually-browsed branches were counted on 9972 pines. Moose browsing was not significantly related to birch (Betula pendula Roth, B. pubescens Ehrh.) density, nor did it differ between pines (Pinus contorta Douglas or P. sylvestris L.). However, increased pine density, site productivity and proximity to a highway were associated with increased browsing. Further large-scale studies are needed to understand moose habitat selection and the effects of roads.     

Effects of Root Freezing on the Physiology and Growth of Picea glauca,Picea mariana and Pinus banksiana Seedlings Under Different Soil Moisture Regimes

The root systems of 2-yr-old Picea glauca, Picea mariana and Pinus banksiana seedlings were submitted to various frost temperatures during an artificial frost to induce different levels of root damage. Frost-damaged and control seedlings were placed in a greenhouse under high and low soil moisture regimes. Seedling growth and physiology were evaluated periodically. Seedling survival was reduced when root damage reached levels of 60-80%. Root systems of all three species showed partial to total recovery by the end of the experiment. In general, root freezing damage caused reductions in seedling growth, with these reductions becoming less significant over time. Root damage had little to no effect on black spruce and jack pine seedling physiology, while white spruce CO 2 uptake decreased with increasing root damage. Shoot nitrogen content of all three species decreased slightly with increasing root damage.     

Decomposition and nutrient loss from prunings of different contour hedgerow species in tea plantations in the sloping highlands of Sri Lanka

Contour hedgerows of multipurpose tree species in the sloping tea lands of Sri Lanka are expected to reduce soil erosion and also add significant amounts of plant nutrients to the soil via periodic prunings. The objective of this experiment was to characterize the biomass decomposition pattern and quantify the amount of nutrients added through prunings of six tree species (Calliandra calothyrsus, Senna spectabilis, Euphatorium innulifolium, Flemingia congesta, Gliricidia sepium and Tithonia diversifolia) currently being used in hedgerows associated with tea. Withered leaf and stem prunings (50 g) were enclosed in 2-mm litter bags, placed at 5-cm depth and retrieved after one, three, six, nine and 12 weeks. Loss of initial dry weight, N, P and K was measured. Single exponential decay function adequately described both dry weight and nutrient loss. Tree species differed significantly in their rate of breakdown with decomposition constants (k) varying from 0.0299 to 0.2006 week⁻¹ for leaves and from 0.0225 to 0.0633 week⁻¹ for stems. Gliricidia showed the highest k for leaves with the rest in the following descending order: Senna > Tithonia ≥ Euphatorium > Calliandra > Flemingia. A similar pattern was observed for loss of all nutrients with Calliandra and Flemingia always having lower k values than the rest. Although N immobilization was not observed, immobilization of P and K was observed during the first week of incubation in some species, particularly in stem prunings. Annual biomass of prunings differed significantly between tree species in the following descending order: Calliandra > Senna > Flemingia > Tithonia > Gliricidia > Euphatorium. Calliandra added the greatest amount of nutrients annually to the soil with Euphatorium adding the least. Calliandra prunings provided the annual total K requirement and 49% of the N requirement of mature tea. However, none of the species provided more than 5% of the P requirement. It is concluded that among the tree species tested, Calliandra and Flemingia are the most suitable for contour hedgerows in tea plantations of this agroclimatic region because of their higher soil nutrient enrichment capacity and slower decomposition rates which would minimize leaching losses. This revised version was published online in June 2006 with corrections to the Cover Date.     

Growth of Phlebiopsis gigantea in wood of seven conifer species

Heterobasidion parviporum and Heterobasidion annosum are widely distributed root‐rot fungi that infect conifers throughout Europe. Infection of conifer stumps by spores of these pathogens can be controlled by treating fresh stumps with a competing non‐pathogenic fungus, Phlebiopsis gigantea. In this study, growth of three Latvian strains of P. gigantea and the biological control agent ‘Rotstop’ strain was evaluated in stem pieces of Norway spruce, Scots pine, lodgepole pine, Douglas‐fir, Weymouth pine, Siberian larch and Sitka spruce. The growth rates of one H. parviporum and one H. annosum isolate were also measured in the same stem pieces. The growth rate of P. gigantea varied greatly in wood of different conifer species. It was higher in the three pine species, lower in Norway spruce and lowest in Sitka spruce and Siberian larch, and in Douglas‐fir, this fungus did not grow. The largest area of wood occupied by P. gigantea was in lodgepole pine. Growth of Latvian isolates of P. gigantea in the wood of Pinus and Picea species was comparable to that of the Rotstop isolate. Consequently, stump treatment with local P. gigantea isolates should be recommended. However, our results suggest that Douglas‐fir stump treatment against Heterobasidion by P. gigantea may be ineffective and other stump treatment methods should be considered.     

Effects of Seed Weight and Seed Type on Early Seedling Growth of Pinus sylvestris under Harsh and Optimal Conditions

The effects of seed weight and seed type on seedling growth of Pinus sylvestris (L.) were studied by seeding individually weighed orchard and stand seed in different mixtures under harsh (direct seeding in field) and optimal (seeding in nursery) conditions. In the nursery experiment an increase in the seed weight from 3 to 7 mg increased the seedling height by 10-27% and total weight by 27-113%, and decreased the height/diameter ratio by 5-6% after 2 yrs. With elimination of seed weight effects, orchard seedlings were 2% taller than stand seedlings in year 2. Without elimination of seed weight effects, orchard seedlings were 7-13% taller. In the field experiment an increase in the seed weight from 3 to 7 mg increased seedling height by 18-65%, stem volume by 81-274% and the number of top-buds by 23-34% in year 5. After elimination of seed weight effects, orchard seedlings were 7-13% taller than stand seedlings and without elimination of seed weight effects 20-21% taller after 5 yrs. Even after elimination of both seed weight and genetic effects orchard seedlings were 3-9% larger than stand seedlings in the field experiment. In conclusion, the influence of seed weight and seed type on growth traits and slenderness is highly significant and the influence seems to be greater in harsh conditions.     

Stand Structure in Pine,Spruce and Deciduous Forests: A Comparison Between Finnish and Russian Karelia

This study investigated the stand structure in pine, spruce and deciduous forests in the border district of Finland and Russia. A total of 46 mature forest stands was selected as pairs, the members of each pair being as similar as possible with respect to their forest site type, age, moisture and topography. The stands were then compared between the two countries by means of basal areas and number of stems. The proportions of dominating tree species were 2-12% lower, and correspondingly the proportions of secondary tree species higher, in Russian forests. The density of the forest stock was also higher in each forest type in Russia. The forests in the two countries differed most radically in terms of the abundance of dead trees. The amount was two to four times higher in Russian deciduous and spruce forests, and in pine forests the difference was 10-fold. The stand structures indicated that Russian coniferous stands, in particular, were more heterogeneous than intensively managed pine and spruce stands in Finland.     

Growth and Terminal Bud Formation in Picea abies Seedlings Grown with Alternating Diurnal Temperature and Different Light Qualities

The root collar diameter and the height:diameter ratio are of particular importance in container-grown seedlings where a high density in the containers may produce spindly seedlings. Temperature regimes and light quality are known to affect plant growth. The aim of this study was to identify responses in Picea abies (L.) Karst. seedlings grown with light providing different red:far-red ratios and under temperature regimes with alternating day (DT) and night temperature (NT) from negative (DT < NT) to positive (DT > NT) difference (DIF) between DT and NT. Experiments were conducted in controlled environment chambers and in a daylight phytotron. Only limited thermoperiodic responses appeared in P . abies seedlings with respect to seedling height and dry weight accumulation. The formation of terminal buds, however, was clearly delayed in seedlings grown at negative DIF. The results indicate a requirement for day extension light that is high in far-red, to prevent terminal bud formation under natural short-day conditions. An extended study should be conducted to clarify the minimum level of light intensity and the optimal light quality needed to prevent terminal bud formation under natural short-day conditions.     

CAD与建筑设计的关系

本文分析了CAD在设计中引起的正面和负面影响,并进行了系统的阐述,从而使设计者在应用中能够保持客观的态度。     

Potential to harness superior nutritional qualities of exotic baobabs if local adaptation can be conferred through grafting

Baobab leaves form an important part of the local diet in Sahel countries and elsewhere in Africa. Existing leaf nutritional data and agroforestry performance information are based solely on Adansonia digitata L., the baobab of continental Africa. The introduction potential of Adansonia species from the center of diversity in Madagascar and from Australia remains untapped. To assess this potential, the mineral contents and B₁ and B₂ vitamin levels of dried baobab leaves were determined for five-year old trees of A. digitata, A. gibbosa (A. Cunn.) Guymer ex D. Baum, A. rubrostipa Jum. & H. Perrier (syn. A. fony Baill.), A. perrieri Capuron and A. za Baill. grown in an introduction trial in Mali. Nutritional data were evaluated against survival and vigor to identify promising germplasm. Leaf vitamin and crude protein contents were highest in the Madagascar species, especially A. rubrostipa (B₁ 88 mg 100 g⁻¹, B₂ 187 mg 100 g⁻¹, protein 20.7% dry weight). However, the local species far outperformed the introductions in survival, tree height, basal diameter and resistance to termites. We suggest grafting as a way of harnessing the vigor of well-adapted local baobab varieties to the superior nutritional profiles of A. rubrostipa and others. Cross-species grafting tests in Adansonia were successful, thus creating new agroforestry possibilities with different scion/rootstock combinations.     

Modelling of adequate pretwist for obtaining straight timber

Abstract

Wood in general and wooden studs in particular are often distorted owing to uneven shrinkage during the drying process in the sawmill. Twist is often the most detrimental of all types of distortion, and it is caused by spiral grain in combination with variations in moisture content. For sawmills, the objective is to produce dried, straight boards, and one method of dealing with boards with excessive spiral grain is to sort them out and then dry them in a pretwisted position to obtain straight boards after drying. A model using the finite element (FE) method for the simulation of drying twist distortions was first calibrated against laboratory experiments in which boards were dried with and without restraints and pretwists. After the calibration, the FE results were compared with industrial test results for boards that were dried without restraints or with restraints with zero pretwist, i.e. straight restraints. The FE model used an elastic–ideally plastic material model to obtain permanent deformations. The calibration was to set the yield stresses so that there was a good match between FE results and results from the laboratory experiments. The comparison between the industrial test results and the FE results showed that the FE model is capable of realistic simulations of drying boards with and without restraints and presumably also pretwists.