Iridium-catalyzed carbonyl allylation by allyl ethers with tin(II) chloride

3-Alkoxypropenes, namely allyl ethers such as allyl butyl ether, allyl 2-hydroxypropyl ether, and diallyl ether, serve as reagents for the allylation of aldehydes with tin(II) chloride in the presence of a catalytic amount of [IrCl(cod)]₂ in THF and H₂O at 50 °C to produce the corresponding homoallylic alcohols.     

Application of hydroxy sodalite films as novel water selective membranes

Supported hydroxy sodalite (H-SOD) membranes were prepared on α-alumina disks using direct hydrothermal synthesis at 413 K for 3.5 h. The continuity of the membranes was verified using single gas permeation of He and N₂ at ambient conditions. The membranes were impermeable to N₂ and He, which validated absence of defects in the membrane structure. The membranes were used in dewatering several organic alcohol/water mixtures (organic alcohol being: methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, 1-pentanol, and 2-pentanol). The influence of feed temperature (303–473 K), feed concentration (0–100 mol% alcohol in the feed), and absolute feed pressure (1.6–2.4 MPa) on the water flux were analyzed. The absolute feed pressure had no effect on the water permeance. The membrane exhibited a water/alcohol separation factor larger than 10⁶ and showed excellent thermal, mechanical, and operation stability in continuously dehydrating a water/ethanol mixture (72 mol% water) by pervaporation at 473 K and 2.2 MPa for 125 h. The normalized water flux correlated well with the water feed concentration for the primary alcohols. Below 40 mol% water in mixtures with secondary alcohols the water flux was three orders of magnitude lower. The water mobility through the membrane had an activation energy of ∼15 kJ/mol.     

Preparation and characterization of mesoporous TiO2-CeO2 nanopowders respond to visible wavelength

Mesoporous TiO₂-CeO₂ nanopowders responding to visible wavelength were synthesized by using a surfactant assisted sol-gel technique. They were obtained using metal alkoxide precursors modified with acetylacetone (ACA) and laurylamine hydrochloride (LAHC) as surfactant. The samples were characterized by XRD, nitrogen adsorption isotherm, SEM, TEM, and selected area electron diffraction (SAED), respectively. The 95 mol% TiO₂-5 mol% CeO₂ system yielded single anatase phase, however, further addition of the CeO₂ formed cubic CeO₂ structure while anatase TiO₂ decreased. Additions of 5 and 10 mol% CeO₂ increased the surface area, but those of 25, 50, and 75 mol% CeO₂ did not affect it very much. By using this mixed metal oxides system, TiO₂ can be modified to respond to the visible wavelength. The mixed metal oxides had catalytic activity (evaluating the formation rate of I₃⁻) about 2-3 times higher than pure CeO₂, while nanosize anatase type TiO₂ materials had no catalytic activity under visible light. The catalytic activity was almost proportional to the specific surface area. The formation rate of I₃⁻ was much improved by changing the calcination temperature and calcination period. Highest catalytic activity in this study was obtained for the 50 mol% TiO₂-50 mol% CeO₂ nanopowders calcined at 250 °C for 24 h.     

Synthesis, structure, properties, volatility, and thermal stability of molybdenum(II) and tungsten(II) complexes containing allyl, carbonyl, and pyrazolate or amidinate ligands

Treatment of M(allyl)(Cl)(CO)₂(py)₂ (M = Mo, W) with 1 equiv. of potassium pyrazolates in tetrahydrofuran at −78 °C afforded M(allyl)(R₂pz)(CO)₂(py)_n (R₂pz = 3,5-disubstituted pyrazolate; n = 1, 2) in 68-81% yields. X-ray crystal structure analyses of Mo(allyl)((CF₃)₂pz)(CO)₂(py)₂ and W(allyl)(tBu₂pz)(CO)₂(py) revealed η¹- and η²-coordination of the (CF₃)₂pz and tBu₂pz ligands, respectively. Analogous treatment of Mo(allyl)(Cl)(CO)₂(NCCH₃)₂ with 1 equiv. of tBu₂pzK in tetrahydrofuran at −78 °C afforded [Mo(allyl)(tBu₂pz)(CO)₂]₂ in 79% yield. An X-ray crystal structure analysis of [Mo(allyl)(tBu₂pz)(CO)₂]₂ showed a dimeric structure bridged by two μ-η²:η¹-tBu₂pz ligands. Treatment of M(allyl)(Cl)(CO)₂(py)₂ with 1 equiv. of lithium 1,3-diisopropylacetamidinate or lithium 1,3-di-tert-butylacetamidinate in diethyl ether at −78 °C afforded M(allyl)(iPrNC(Me)NiPr)(CO)₂(py) and M(allyl)(tBuNC(Me)NtBu)(CO)₂(py), respectively, in 68-78% yields. The new complexes were characterized by spectral and analytical methods and by X-ray crystal structure determinations. M(allyl)(iPrNC(Me)NiPr)(CO)₂(py) adopt pseudo-octahedral geometry about the metal centers, with the 1,3-diisopropylacetamidate ligand nitrogen atoms spanning one axial site and one equatorial site of the octahedron. By contrast, M(allyl)(tBuNC(Me)NtBu)(CO)₂(py) adopt pseudo-octahedral structures in which the two 1,3-di-tert-butylacetamidinate ligand nitrogen atoms span two equatorial coordination sites. Sublimation of M(allyl)(tBuNC(Me)NtBu)-(CO)₂(py) at 105 °C/0.03 Torr afforded ?7% yields of M(allyl)(tBuNC(Me)NtBu)(CO)₂, along with sublimed M(allyl)(tBuNC(Me)NtBu)(CO)₂(py). W(allyl)(tBuNC(Me)NtBu)(CO)₂ exists in the solid state as a 16-electron complex with distorted square pyramidal geometry. Many of the new complexes undergo dynamic ligand site exchange in solution, and these processes were probed by variable temperature ¹H NMR spectroscopy. The volatilities and thermal stabilities were evaluated to determine the potential of the new complexes for use as precursors in thin film growth experiments.     

Chemical state analysis of fluorine in various compounds using X-ray fluorescence spectra

F Kα X-ray fluorescence (XRF) spectra of various fluorides were measured and to investigate the chemical state of fluorine in xHoF₃-20BaF₂-10AlF₃-(70 − x)GeO₂ (mol%, x = 10-50) glass. The main peak (Kα_1,2) position and the relative intensity of the satellite peak attributable to Kα_3,4 were discussed relating to the M-F bond covalency. Results showed that the fluorine in xHoF₃-20BaF₂-10AlF₃-(70 − x)GeO₂ (mol%, x = 10-50) glass had a completely different chemical state from that of starting materials. Quantitative analyses of the glasses were also undertaken using XRF measurements for each component. These results suggest that 30% fluorine in the 50HoF₃-20BaF₂-10AlF₃-20GeO₂ system is substituted by oxygen through pyrohydrolysis of the fluorides.     

Backbone modified small bite-angle diphosphines: Synthesis and molecular structures of [M(CO)4{X2PC(RR)PX2}] (M = Mo, W; X = Ph, Cy; R = H, Me, Et, Pr, allyl, R = Me, allyl)

A range of new small bite-angle diphosphine complexes, [M(CO)₄{X₂PC(R¹R²)PX₂}] (M = Mo, W; X = Ph, Cy; R¹ = H, Me, Et, Pr, allyl, R² = Me, allyl), have been prepared via elaboration of the methylene backbones in [M(CO)₄(X₂PCH₂PX₂)] as a result of successive deprotonation and alkyl halide addition. When X = Ph it proved possible to replace both methylene protons but for X = Cy only one substitution proved possible. This is likely due to the electron-releasing nature of the cyclohexyl groups but may also be due to steric constraints. Attempts to prepare the bis(allyl) substituted complex [Mo(CO)₄{Ph₂PC(allyl)₂PPh₂}] were only moderately successful. The crystal structures of nine of these complexes are presented.     

Preparation and pyrolysis of poly(allyl iminoalane-co-ethyl iminoalane)s [HAlN(allyl)]m[HAlNEt]n

Poly(allyl iminoalane-co-ethyl iminoalane)s {[HAlN(allyl)]_m[HAlNEt]_n; Allyl/Et-alanes}, have been prepared by reactions of lithium hydridoaluminate (LiAlH₄) with a mixture of allylamine hydrochloride (CH₂CHCH₂NH₂ · HCl; allylNH₂ · HCl) and ethylamine hydrochloride (CH₃CH₂NH₂ · HCl; EtNH₂ · HCl) with various allyl/Et ratios. Spectroscopic analyses indicate that Allyl/Et-alane(1/3) (allyl/Et = 1/3) contains octamers possessing Al-H and C-H groups as well as CC, Al-N, and C-N bonds. The loss of aluminum during pyrolysis of Allyl/Et-alane(1/3) at 1600 °C under an Ar atmosphere is 15%, which is less than the value reported for the pyrolysis of poly(ethyliminoalane) (36%). The suppression can be ascribed to cross-linking reactions involving allyl groups (hydroalumination and polymerization of the allyl groups), judging from infrared (IR) and solid-state nuclear magnetic resonance (NMR) spectroscopy.     

Phase relations in a barium-rich high-temperature region (25-45 mol% CuO, 900-1100 °C) of the BaO-CuOx system

The phase relations have been studied in the BaO-CuO_x system in the range of 25.0-45.0 mol% CuO at 900-1100 °C at P(O₂)=21 kPa (air) by visual polythermal analysis (VPA), powder X-ray diffraction (XRD), electron diffraction (ED) with simultaneous energy-dispersive X-ray (EDX) elemental analysis in a transmission electron microscope (TEM), and iodometric chemical analysis. The discrete deviations 2.02 (101:50), 2.04 (102:50), 2.10 (105:50) of Ba/Cu (Ba:Cu) composition from the stoichiometric ratio 2:1 have been found for the known Ba₂CuO_3+δ oxides in the subsolidus region 900-970 °C. Unit cell parameters of the 101:50 orthorhombic oxide, 102:50 tetragonal one, 105:50 orthorhombic one are, respectively, a=4.049, b=3.899, c=13.034 Å; a=3.985, c=12.968 Å; a=4.087, b=3.897 and c=12.950 Å. ED patterns of the 101:50, 102:50, 105:50 oxides show characteristic supercell reflections with the respective vector 1/60[5 4 0], ≈2/11〈1 1 0〉 and 1/6[2 0 0]. Oxides of the 2:1, 7:4, 5:3 and 23:20 compositions have been found in the crystallization region 970-1050 °C. Unit cell parameters of the 2:1 orthorhombic oxide are a=4.095, b=3.795, c=13.165 Å. Interplanar spacings and X-ray characteristic peak intensities of the 7:4, 5:3 and 23:20 oxides are given. Oxides 2:1 and 7:4 melt pseudocongruently at 1020 and 1005 °C, oxides 5:3 and 23:20 melt incongruently at 995 and 980 °C, respectively. A diagram of the phase relations in the studied region of the BaO-CuO_x system has been constructed, whose structure is considered as the total projection of phase states of the system existing for different x.     

Direct reductive amination and selective 1,2-reduction of α,β-unsaturated aldehydes and ketones by NaBH4 using H3PW12O40 as catalyst

A simple and convenient procedure for direct reductive amination of aldehydes and ketones with sodium borohydride is described. The reaction has been carried out in methanol in the presence of a catalytic amount of H₃PW₁₂O₄₀ (0.5 mol %). α,β-Unsaturated aldehydes and ketones can be easily converted into the corresponding allyl alcohols by reaction with H₃PW₁₂O₄₀ (0.5 mol %)/NaBH₄.     

N-alkylpyridinium quaternization combined with liquid chromatography–electrospray ionization-tandem mass spectrometry: A highly sensitive method to quantify fatty alcohols in thyroid tissues

A highly sensitive method was developed for the identification and quantification of fatty alcohols in biological tissues. In the presence of pyridine-d₀ and triflic anhydride (Tf₂O), fatty alcohols were converted into permanently charged N-alkylpyridinium ions. Stable isotope-labeled derivatives were generated by pyridine-d₅ and added as internal standard (IS). The mixture was analyzed by liquid chromatography coupled to positive electrospray ionization tandem mass spectrometry (LC–ESI-MS/MS). This method was optimized and validated in terms of reaction time, derivatization efficiency, stability, desalting, and ion suppression effect. Besides, fatty alcohols exhibited good linear relationship (r² > 0.993) over the concentration range of 10 ng mL⁻¹–1 μg mL⁻¹. The limits of detection (LODs) were lowered from previously reported 0.1 ng mL⁻¹ to 0.25 pg mL⁻¹. Precision (RSD% < 15.6%), accuracy (93.0–107.2%), matrix effect, and recovery (in thyroid tissues) were validated as well. Finally, this method was applied for the analysis of ten even carbon-numbered fatty alcohols (C₈–C₂₄) in human thyroid carcinoma and para-carcinoma tissues, revealing a significant decrease of fatty alcohols (free and esterified) in thyroid carcinoma tissues (p < 0.05).     

硫酸亚铈催化的芳香化合物与苄基醇、烯丙醇类化合物以及苄基氯的傅-克烷基化反应研究

硫酸亚铈作为一种便宜的和有效的催化剂催化芳香化合物与苄基醇、烯丙醇类化合物和苄基氯的傅-克烷基化反应. 在1～10 mol%的硫酸亚铈存在下, 芳香化合物分别与苄基醇、烯丙醇类化合物和苄基氯能够顺利有效地进行傅-克烷基化反应. 此外, 催化剂能回收, 再次使用三次也没有明显地失去催化活性.     

Synthesis of zirconium titanate with an ordered M-fergusonite (beta) structure

We report a new zirconium titanate compound (Zr,Ti)O₂ with 27.5-35 mol% titania (TiO₂) formed from the oxides at 35-38 kbar, 1400-1500 °C. Crystal structure investigations at atmospheric conditions with powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) revealed a monoclinic structure related to that of M-fergusonite (beta). Unit-cell dimensions (from 27.5 to 35 mol% TiO₂): a=7.267(20)-7.340(2) Å, b=10.435(3)-10.429(1) Å, c=5.023(11)-5.040(1) Å, β=136.45(12)-137.55(1)°, V=262.44(92)-260.40(12) Å³, Z=4. Rietveld refinement (R_F=1.55) of a sample with 32.8 mol% TiO₂ indicates that site A is 8-fold coordinated, mostly occupied by Zr, while site B has 6-fold average coordination, occupied by Ti and Zr. Site B is at least partly ordered, as indicated by superstructure reflections 0 0 1 and −2 0 1 detected with TEM, reducing the space group from C2/c to C2. Pronounced streaking of selected diffraction spots is linked to the boundaries of lamellar domains in twin orientation, with twin planes either (200) or (20−2). Adjacent lamellae differ slightly in composition, causing subtle asymmetry of the twin diffraction patterns.     

3-Iodoacetylaminobenzanthrone as a fluorescent derivatizing reagent for thiols in high-performance liquid chromatography

A new thiol-reactive derivatizing reagent, 3-iodoacetylaminobenzanthrone (IAB) has been developed for thiol analysis in liquid chromatography. In aqueous methanol containing 15 mM pH 8.3 H₃BO₃-KCl-Na₂CO₃ buffer, IAB reacted with thiols at 35 °C for 15 min. The derivatives of IAB with glutathione (GSH), cysteine (Cys), homocysteine (Hcy) and N-acetylcysteine (Nac) were well separated on a C₁₈ column with the mobile phase of methanol-water (50:50, v/v) containing 15 mM pH 2.7 H₃cit-Na₂HPO₄ buffer. At λ_ex/λ_em=420/540 nm, the detection limits were 20, 20, 55 and 40 fmol (1, 1, 2.3 and 2 nM), respectively, with a signal-to-noise ratio of 3. Owing to the preferential selectivity of iodoacetamidyl moiety to SH group, amino acids, aliphatic amines, phenol and alcohols had no obvious interference with the determination. The proposed method has been applied to the determination of thiols in human blood with recoveries of 98.5-105.3%.     

The photochemistry of (η-2-R-C3H4)Fe(CO)(NO)(X) (R = H or Cl; X = CO or PPh3) in room temperature solution or frozen gas matrixes

A photochemical study of allyl iron complexes of the type, (η³-2-R-C₃H₄)Fe(CO)(NO)(X) (R = H or Cl; X = CO or PPh₃) is presented. These compounds were studied in solid matrixes at 20 K, and at room temperature, by a combination of laser flash at 355 nm and steady-state photolysis. The predominant photochemical process for these compounds is loss of a CO ligand. In addition, exhaustive irradiation of (η³-2-R-C₃H₄)Fe(CO)(NO)(PPh₃) with λ_exc > 300 nm provided evidence for a haptotropic shift of the allyl group from η³ to η¹ coordination.     

Sonogashira coupling with aqueous ammonia directed to the synthesis of azotolane derivatives

Sonogashira coupling with aqueous ammonia is tolerable for the reaction of aryl iodides or terminal alkynes bearing an azobenzene group. The reaction of (4-heptyloxyphenyl)ethyne with (4-heptyloxyphenyl)-(4-iodophenyl)diazene in the presence of 1 mol% of PdCl₂(PPh₃)₂, 2 mol% of CuI, and 2 equiv of 0.5 M aqueous ammonia gives the corresponding azotolane in 87% isolated yield after stirring at room temperature for 15 h.     

A spectroscopic study on medium polarity in fluorous alcohol

The paper describes the polarities of three fluorous (F) aliphatic alcohols: perfluorinated tert-butanol (F-t-BuOH), n-butanol (F-n-BuOH), and n-heptanol (F-n-HepOH). For the purpose, we conducted absorption and fluorescence spectroscopies of coumarin 153 (C153) and 102 (C102) in three F and 13 non-fluorous (non-F) alcohols and determined their maximum energies: ν^a (absorption) and ν^f (fluorescence). We obtained linear relationships between the Stokes shifts of the dyes (i.e., (ν^a − ν^f)) and a medium polarity parameter for 13 non-F alcohols, f(x): f(x) = [(D_s − 1)/(2D_s + 1) − (n² − 1)/(2n² + 1)], where D_s and n were the dielectric constant and refractive index of a solvent, respectively. By comparing the Stokes shifts of the dyes in three F alcohols with those in 13 non-F alcohols (i.e., (ν^a − ν^f) vs. f(x) plot), the D_s values in F-t-BuOH, F-n-BuOH, and F-n-HepOH were evaluated to be 2.7-3.9, 4.3-5.1, and 4.0-5.2, respectively, while those in the relevant non-F alcohols were 12.5, 17.5, and 12.9, respectively. Thus, the present experiments demonstrated that the polarities of these F alcohols were much lower than those of the relevant non-F alcohols.     

A simple procedure for the esterification of alcohols with sodium carboxylate salts using 1-tosylimidazole (TsIm)

An efficient and selective method for esterification of alcohols using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of RCO₂Na (R: alkyl and aryl), TsIm, and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF to afford the corresponding esters in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Studies on novel thermally stable segmented polyurethanes based on thiourea-derivative diols

Novel thermoplastic segmented poly(urethane-thiourea)s (PURs) were synthesized via one-step polymerization from aromatic diols containing sulfur (thiourea linkage) in the main-chain, including terephthaloyl bis (3-(2-hydroxopyridyl) thiourea) (TBHPT) and terephthaloyl bis (3-(5-naphtholyl) thiourea) (TBNT), along with 1,4-phenylene diisocyanate (PDI) as hard segment and 20, 50 and 80 mol% polyethylene glycol (PEG) as a soft segment. The prepared chain extenders and polymers were characterized by conventional methods, and physical properties such as η_inh, solubility, thermal stability and thermal behavior were studied. Easily processable PURs with excellent thermal stability were obtained by incorporating 20 mol% PEG in the soft segment. Thermogravimetric analysis indicated that poly(urethane-thiourea)s were fairly stable above 500 °C and own high glass transition temperatures about 263-266 °C. These polymers also showed partially crystalline structures. Ultimately, weight average molecular weights (M_w) of PURs were up to 109 × 10³. Compared to typical polyurethanes, PURs exhibited better thermal stability and T_g’s owing to rigid hard segment structure.     

Johnson-Claisen rearrangement of γ-fluoro-γ-(di- or tri-fluoromethyl)allyl alcohols affording stereoselective access to β-fluoro-β-di- or tri-fluoromethylated γ,δ-unsaturated carboxylic acid esters

γ-Fluoro-γ-di- or tri-fluoromethyl-β-(tosyloxy)allyl alcohols smoothly reacted with the orthoacetic acid triethyl ester in the presence of a catalytic amount of propionic acid and hydroquinone at 140 °C for 24 h or 48 h to afford the corresponding (Z)-β-fluoro-β-polyfluoromethyl-γ,δ-unsaturated carboxylic acid esters in fair to good yields.     

Thermolytic formation and microstructure of IrO2 + Ta2O5 mixed oxide anodes from chloride precursors

The thermolytic formation of IrO₂+Ta₂O₅ mixed oxides from chloride precursors is studied by thermogravimetry (TGA) and differential thermal analysis (DTA). The structure and morphologies of the corresponding oxide films coated on titanium bases are determined by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM), respectively. The experimental results showed that, as a result of the interaction between Ir and Ta components, especially, the formation of solid solution phases during the thermolysis processes, the oxidative dissociation of the H₂IrCl₆+TaCl₅ mixture is facilitated. The catalytic effect reached the maximum at a nominal IrO₂ content of 70 mol% in the expected product, i.e. IrO₂+Ta₂O₅ mixed oxides, accompanied by the highest solid solubility between the two oxides and the finest rutile-structured crystalline grains in the oxides. For the mixed precursors with a low iridium content (e.g. 10 mol% nominal IrO₂ in IrO₂+Ta₂O₅) or a low tantalum content (e.g. 80 mol% nominal IrO₂), however, the decomposition of the major component is inhibited by the minor one at high temperatures (610-800 °C). The results show that the solid solution at low Ir contents (<30 mol% IrO₂) is unstable since it decomposes at high temperatures (≥750 °C). Two or more IrO₂ based rutile-constructed solid solution phases are thermolytically formed from the mixed precursors with nominal IrO₂ contents ≥30 mol%. The rutile-structured phases stably exist only in the case of IrO₂ contents ≥60 mol%.