Facile synthesis of mercaptosuccinic acid-capped CdTe/CdS/ZnS core/double shell quantum dots with improved cell viability on different cancer cells and normal cells

Water-soluble, mercaptosuccinic acid (MSA)-capped CdTe/CdS/ZnS core/double shell quantum dots (QDs) were prepared by successive growth of CdS and ZnS shells on the as-synthesized CdTe/CdS_thin core/shell quantum dots. The formation of core/double shell structured QDs was investigated by ultraviolet-visible (UV–Vis) absorption and photoluminescence (PL) spectroscopy, PL decay studies, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The core/double shell QDs exhibited good photoluminescence quantum yield (PLQY) which is 70% higher than that of the parent core/shell QDs, and they are stable for months. The average particle size of the core/double shell QDs was ～3 nm as calculated from the transmission electron microscope (TEM) images. The cytotoxicity of the QDs was evaluated on a variety of cancer cells such as HeLa, MCF-7, A549, and normal Vero cells by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) cell viability assay. The results showed that core/double shell QDs were less toxic to the cells when compared to the parent core/shell QDs. MCF-7 cells showed proliferation on incubation with QDs, and this is attributed to the metalloestrogenic activity of cadmium ions released from QDs. The core/double shell CdTe/CdS/ZnS (CSS) QDs were conjugated with transferrin and successfully employed for the biolabeling and fluorescent imaging of HeLa cells. These core/double shell QDs are highly promising fluorescent probe for cancer cell labeling and imaging applications.     

Preparation of Highly Stable and Photoluminescent Cadmium-Free InP/GaP/ZnS Core/Shell Quantum Dots and Application to Quantitative Immunoassay

Indium phosphide (InP) quantum dots (QDs) are ideal substitutes for widely used cadmium-based QDs and have great application prospects in biological fields due to their environmentally benign properties and human safety. However, the synthesis of InP core/shell QDs with biocompatibility, high quantum yield (QY), uniform particle size, and high stability is still a challenging subject. Herein, high quality (QY up to 72%) thick shell InP/GaP/ZnS core/shell QDs (12.8 ± 1.4 nm) are synthesized using multiple injections of shell precursor and extension of shell growth time, with GaP serving as the intermediate layer and 1-octanethiol acting as the new S source. The thick shell InP/GaP/ZnS core/shell QDs still keep high QY and photostability after transfer into water. InP/GaP/ZnS core/shell QDs as fluorescence labels to establish QD-based fluorescence-linked immunosorbent assay (QD-FLISA) for quantitative detection of C-reactive protein (CRP), and a calibration curve is established between fluorescence intensity and CRP concentrations (range: 1–800 ng mL⁻¹, correlation coefficient: R² = 0.9992). The limit of detection is 2.9 ng mL⁻¹, which increases twofold compared to previously reported cadmium-free QD-based immunoassays. Thus, InP/GaP/ZnS core/shell QDs as a great promise fluorescence labeling material, provide a new route for cadmium-free sensitive and specific immunoassays in biomedical fields.     

Temperature-dependent photoluminescence of CuInS2 quantum dots

Temperature-dependent photoluminescence (PL) spectroscopy of CuInS₂ core and CuInS₂/ZnS core–shell quantum dots (QDs) was studied for understanding the influence of a ZnS shell on the PL mechanism. The PL quantum yield and lifetime of CuInS₂ core QDs were significantly enhanced after the QD surface was coated with the ZnS shell. The temperature dependences of the PL energy, linewidth, and intensity for the core and core–shell QDs were studied in the temperature range from 92 to 287 K. The temperature-dependent shifts of 98 meV and 35 meV for the PL energies of the QDs were much larger than those of the excitons in their bulk semiconductors. It was surprisingly found that the core and core–shell QDs exhibited a similar temperature dependence of the PL intensity. The PL in the CuInS₂/ZnS core–shell QDs was suggested to originate from recombination of many kinds of defect-related emission centers in the interior of the cores.     

Tunable and High Photoluminescence Quantum Yield from Self‐Decorated TiO2 Quantum Dots on Fluorine Doped Mesoporous TiO2 Flowers by Rapid Thermal Annealing

Herein a novel approach is reported to achieve tunable and high photoluminescence (PL) quantum yield (QY) from the self‐grown spherical TiO₂ quantum dots (QDs) on fluorine doped TiO₂ (F‐TiO₂) flowers, mesoporous in nature, synthesized by a simple solvothermal process. The strong PL emission from F‐TiO₂ QDs centered at ≈485 nm is associated with shallow and deep traps, and a record high PL QY of ≈5.76% is measured at room temperature. Size distribution and doping of F‐TiO₂ nanocrystals (NCs) are successfully tuned by simply varying the HF concentration during synthesis. During the post‐growth rapid thermal annealing (RTA) under vacuum, the arbitrary shaped F‐TiO₂ NCs transform into spherical QDs with smaller sizes and it shows dramatic enhancement (≈163 times) in the PL intensity. Electron spin resonance (ESR) and X‐ray photoelectron spectroscopy (XPS) confirm the high density of oxygen vacancy defects on the surface of TiO₂ NCs. Confocal fluorescence microscopy imaging shows bright whitish emission from the F‐TiO₂ QDs. Low temperature and time resolved PL studies reveal that the ultrafast radiative recombination in the TiO₂ QDs results in highly efficient PL emission. A highly stable, biologically inert, and highly fluorescent TiO₂ QDs/flowers without any capping agent demonstrated here is significant for emerging applications in bioimaging, energy, and environmental cleaning.     

Stabilization of porous silicon surface by low temperature photoassisted reaction with acetylene

A hybrid approach of forming a stabilizing layer of bonded carbon on porous silicon (PSi) surface by photoassisted reaction of acetylene gas at low temperatures is described. The PSi samples were made by anodization in a HF/H₂O₂ electrolyte at a current density of 80 mA/cm². Samples show a strong luminescence with a peak at 644±4 nm. The photoluminescence (PL) intensity shows a very strong quenching under the influence of continuous laser illumination (∼0.25 W/cm², 488 nm). The PSi samples were subjected to flowing acetylene under optical illumination from quartz halogen lamp (20 mW/cm²). The PL intensity is initially quenched to very low values (less than 5% of initial value) and then recovers on further exposure to acetylene to a final value ∼30% of the initial value. No quenching is observed on further exposure to laser illumination in ambient air instead an improvement of 15–25% in PL intensity is observed. This behaviour is a good indicator of the formation of a practically stable PSi surface.     

Synthesis and photoluminescence properties of aqueous CdWO4 quantum dots with WO6 luminescence center

Aqueous CdWO₄ QDs were synthesized by the reaction of CdCl₂ and Na₂WO₄ in the presence of mercaptoacetic acid (TGA) as capping reagent. The crystal morphology, particle size and its distribution of as-prepared products were characterized by transmission electron microscopy (TEM, SAED) atomic force microscopy (AFM), high-resolution transmission electron microscopy (HRTEM), and photon correlation spectroscopy (PCS), respectively. Qualitative assays for functional groups on the QDs’ surface were measured by fourier transform infrared spectroscopy (FTIR). Photoluminescence properties of QDs were studied by photoluminescence spectroscopy (PL). The results showed that the single QD with diameter of about 8 ± 2 nm was single-crystal. The particle size distribution of QDs was normal. Infrared absorption bands of carboxylic group on the surface of CdWO₄ QDs were observed around 1610-1550 cm⁻¹ (nonsymmetrical vibration of -COO⁻) and 1400 cm⁻¹ (symmetric vibration of C-O). With reaction-time going, PL peak position shifted from 498 to 549 nm and intensity of PL increased first and then decreased. PL peak position of QDs was blue-shift compared with 570 nm WO₆⁶⁻ luminescence center of bulk CdWO₄.     

Physical reasons of emission transformation in infrared CdSeTe/ZnS quantum dots at bioconjugation

The core/shell CdSeTe/ZnS quantum dots (QDs) with emission at 780–800 nm (1.55–1.60 eV) have been studied by means of photoluminescence (PL) and Raman scattering methods in the nonconjugated state and after conjugation to different antibodies (Ab): (i) mouse monoclonal [8C9] human papilloma virus Ab, anti-HPV 16-E7 Ab, (ii) mouse monoclonal [C1P5] human papilloma virus HPV16 E6+HPV18 E6 Ab, and (iii) pseudo rabies virus (PRV) Ab. The transformations of PL and Raman scattering spectra of QDs, stimulated by conjugated antibodies, have been revealed and discussed.The energy band diagram of core/shell CdSeTe/ZnS QDs has been designed that helps to analyze the PL spectra and their transformations at the bioconjugation. It is shown that the core in CdSeTe/ZnS QDs is complex and including the type II quantum well. The last fact permits to explain the nature of infrared (IR) optical transitions (1.55–1.60 eV) and the high energy PL band (1.88–1.94 eV) in the nonconjugated and bioconjugated QDs. A set of physical reasons has been analyzed with the aim to explain the transformation of PL spectra in bioconjugated QDs. Finally it is shown that two factors are responsible for the PL spectrum transformation at bioconjugation to charged antibodies: (i) the change of energy band profile in QDs and (ii) the shift of QD energy levels in the strong quantum confinement case. The effect of PL spectrum transformation is useful for the study of QD bioconjugation to specific antibodies and can be a powerful technique for early medical diagnostics.     

Optical investigation of phosphorous-ion-implantation induced InAs/GaAs quantum dots' intermixing

This work reports on InAs/GaAs quantum dots (QDs) intermixing, induced by phosphorous ion implantation and subsequent rapid thermal annealing. The implantation process was carried out at room temperature at various doses (5×¹⁰¹⁰-¹⁰¹⁴ ions/cm²), where the ions were accelerated at 50 keV. To promote the atomic intermixing, implanted samples are subjected to rapid thermal annealing at 675 °C for 30 s. Low temperature photoluminescence (PL) measurements are carried out to investigate the influence of the interdiffusion process on the optical and electronic properties of the QDs. PL emission energy; linewidth and integrated intensity are found to exhibit a drastic dependence on the ion implantation doses. The band gap tuning limit has been achieved for an implantation dose of 5×¹⁰¹³ ions/cm². However, our measurement reveals that the accumulated defects for implantation doses higher than ¹⁰¹² ions/cm² drive the system towards the degradation of the QDs structure's quality.     

Energy transfer dynamics between Alq3 and CdTeS/ZnS core shell nanocrystals

The photoluminescence (PL) properties of the guest-host films, using CdTeS/ZnS core shell quantum dots (QDs) as the guest and organic small-molecule material Alq₃ as the host, are studied by steady-state and time-resolved PL spectroscopy. Both the relative intensity and the PL lifetime are intensively dependent on the weight ratio of Alq₃ and CdTeS/ZnS QDs. The detailed analysis provides clear evidence for a Förster energy transfer from Alq₃ host to QDs guest, based on the nonradiative resonant transfer mechanism. The results are relevant to the application of hybrid organic/inorganic systems to OLEDs.     

水溶性CdTe/CdS纳米晶表面SiO2壳层的反相胶束法包覆

"提出了一种水相中制备CdTe/CdS核壳结构纳米粒子的方法.用Te粉作为碲源,用Na2S作为硫源,在50 ℃下制备了CdTe/CdS核壳结构纳米粒子. 用紫外可见吸收光谱和荧光光谱分析了CdS壳层对CdTe核的影响. 随CdS壳层厚度的增加,紫外可见吸收光谱和荧光光谱均发生了红移. CdS壳层厚度较薄时,CdTe/CdS纳米晶的荧光强度较CdTe纳米粒子有显著提高;而CdS壳层厚度较厚时,CdTe/CdS纳米晶的荧光强度会逐渐降低. 用反相胶束法在CdTe/CdS核壳结构纳米粒子的表面包被一层SiO2,     

ZnO@GQDs核壳结构量子点的制备及性能研究

采用原位聚合法制备了以ZnO量子点为核、石墨烯量子点（GQDs）为壳的ZnO@ GQDs核壳结构量子点。通过TEM和HR-TEM对量子点进行形貌和结构的分析表征。结果表明,合成的ZnO@ GQDs核壳结构量子点为球形,粒径为～7 nm,且尺寸均匀。PL光谱研究表明,新型量子点的发射峰位于369 nm,发光峰窄、强度高;相对于ZnO的本征发射峰,GQDs的引入使得ZnO@GQDs核壳量子点的荧光发射峰出现蓝移、强度变高,从而使复合量子点的荧光具有较纯的色度和较高的强度,说明GQDs的引入具有协同优化效应。该量子点有望应用于LED显示器件。     

Hydrothermal Synthesis of High-Quality Thiol-Stabilized CdTexSe1-x Alloyed Quantum Dots

Alloyed semiconductor quantum dots (QDs) enriched the synthetic routes for engineering materials with unique structural and optical properties. High-quality thiol-stabilized CdTe_xSe_1-x alloyed QDs were synthesized through a facile and economic hydrothermal method at 120 °C, a relatively low temperature. These water-soluble QDs were prepared using different capping agents including 3-mercaptopropionic acid (MPA) and L-cysteine (L-Cys). The photoluminescence (PL) intensity and stability of L-Cys-capped CdTe_xSe_1-x QDs were found to be higher than that of MPA-stabilized ones. The molar ratios of Se-to-Te upon preparation were adjusted for investigating the effect of composition on the properties of the resulting QDs. We also investigated the effect of the pH value of the reaction solution on the growth kinetics of the alloyed CdTe_xSe_1-x QDs. The resulting CdTe_xSe_1-x QDs were characterized by UV–vis absorbance and PL spectroscopy, powder X-ray diffraction, and transmission electron microscopy. Being coated with a CdS inorganic shell, the PL intensity and stability of the CdTe_xSe_1-x/CdS core-shell QDs were drastically enhanced, accompanied by the red-shift of the PL peak wavelength. Owing to the unique optical properties, the QDs hold great potential for application and have to be further exploited.     

Shell-dependent hole transport in highly luminescent CdSe-core CdS/ZnCdS/ZnS multi-shell nanocrystals

The photoinduced hole transfer dynamics from CdSe quantum dots (QDs), shelled with ZnS or CdS/CdZnS/ZnS layers, to organic hole transporting materials (HTMs) is investigated by absorption, steady-state and time-resolved photoluminescence (PL) spectroscopy. The PL intensity and lifetime of the QDs are dramatically quenched when HTMs are added into the dilute QD solution. The quenching efficiency of the QDs significantly decreases with increasing the shell thickness and increases with decreasing the oxidation potential of the HTMs. These facts are correlated with the photoinduced hole transfer from the QDs to the HTMs. The above results are helpful in understanding the photoexcitation dynamics-related phenomena of organic molecule conjugated nano-object.     

Photoluminescence scanning on InAs/InGaAs quantum dot structures

The photoluminescence spectra of InAs quantum dots (QDs) embedded into four types of In_xGa_1−xAs/GaAs (x = 0.10, 0.15, 0.20 and 0.25) multi quantum well MBE structures have been investigated at 300 K in dependence on the QD position on the wafer. PL mapping was performed with 325 nm HeCd laser (35 mW) focused down to 200 μm (110 W/cm²) as the excitation source. The structures with x = 0.15 In/Ga composition in the In_xGa_1−xAs capping layer exhibited the maximum photoluminescence intensity. Strong inhomogeneity of the PL intensity is observed by mapping samples with the In/Ga composition of x ≥ 0.20-0.25. The reduction of the PL intensity is accompanied by a gradual “blue” shift of the luminescence maximum at 300 K as follows from the quantum dot PL mapping. The mechanism of this effect has been analyzed. PL peak shifts versus capping layer composition are discussed as well.     

Water‐Dispersible Silicon‐Quantum‐Dot‐Containing Micelles Self‐Assembled from an Amphiphilic Polymer

The dispersion of silicon quantum dots (Si QDs) in water has not been established as well as that in organic solvents. It is now demonstrated that the excellent dispersion of Si QDs in water with photoluminescence (PL) quantum yields (QYs) comparable to those for hydrophobic Si QDs can be realized by combining the processes of hydrosilylation and self‐assembly. Hydrogen‐passivated Si QDs are initially hydrosilylated with 1‐dodecence. The toluene solution of the resulting dodecyl‐passivated Si QDs is mixed with the water solution of the amphiphilic polymer of Pluronic F127 to form an emulsion. Dodecyl‐passivated Si QDs are encapsulated in the micelles self‐assembled from F127 in the emulsion. The size of the Si‐QD‐containing micelles may be tuned in the range from 10 to 100 nm. Although self‐assembly in the emulsion causes the PL QY of Si QDs to decrease, after a few days of storage in ambient conditions, Si QDs encapsulated in the water‐dispersible micelles exhibit recovered PL QYs of ≈24% at the PL wavelength of ≈680 nm. The intensity of the PL from Si QDs encapsulated in the water‐dispersible micelles is >90% of the original value after 60 min ultraviolet illumination, indicating excellent photostability.     

Re-charging the luminescence states in CdSe/ZnS quantum dots at the conjugation to Osteopontin antibodies

The paper presents the original study of photoluminescence (PL) and Raman scattering spectra of core–shell CdSe/ZnS quantum dots (QDs) covered by the amine-derivatized polyethylene glycol (PEG) with luminescence interface states. First commercially available CdSe/ZnS QDs with emission at 640 nm (1.94 eV) covered by PEG polymer have been studied in nonconjugated states. PL spectra of nonconjugated QDs are characterized by a superposition of PL bands related to exciton emission in a CdSe core and to the hot electron–hole recombination via high energy luminescence states. The study of high energy PL bands in QDs at different temperatures has shown that these PL bands are related to luminescence interface states at the CdSe/ZnS or ZnS/polymer interface. Then CdSe/ZnS QDs have been conjugated with biomolecules—the Osteopontin antibodies. It is revealed that the PL spectrum of bioconjugated QDs changed essentially with decreasing hot electron–hole recombination flow via luminescence interface states. It is shown that the QD bioconjugation process to Osteopontin antibodies is complex and includes the covalent and electrostatic interactions between them. The variation of PL spectra due to the bioconjugation is explained on the basis of electrostatic interaction between the QDs and biomolecule dipoles that stimulates re-charging QD interface states. The study of Raman scattering of bioconjugated CdSe/ZnS QDs has confirmed that the antibody molecules have the electric dipoles. It is shown that CdSe/ZnS QDs with luminescence interface states are promising for the study of bioconjugation effects with specific antibodies and can be a powerful technique in biology and medicine.     

Synthesis and Raman signature for the formation of CdO/MnO2 (core/shell) nanostructures

In the present report, bare CdO and CdO/MnO₂ core/shell nanostructures of various cores and different shell sizes were synthesized using co‐precipitation method. The phase, size, shape and structural details of the bare CdO and CdO/MnO₂ nanostructures were investigated by X‐ray diffraction, transmission electron microscopy (TEM), and Raman spectroscopy measurements. TEM micrographs confirm the formation of core/shell nanostructures. The presence of CdO (core) and MnO₂ (shell) crystal phases was determined by analyzing the Raman data of bare CdO and CdO/MnO₂ core/shell nanostructures. The Raman spectra of bare CdO nanostructures contain one broad intense convoluted envelop of three bands in the spectral range of 200–500 cm⁻¹ and a weaker band located at ~940 cm⁻¹. The intensity of these two Raman bands is decreased with the increase of shell size and disappeared completely for the shell size 5.3 ± 1 nm. Further, two new Raman bands appeared at ~451 and ~665 cm⁻¹ for the shell size 1.3 ± 0.1 nm. These two Raman bands are assigned to the deformation of Mn–O–Mn and Mn–O stretching modes of MnO₂. The intensity of these two Raman bands is enhanced with the increase of shell size and attains a maximum value for the shell size 5.3 ± 1 nm. The disappearance of characteristics Raman bands of CdO phase and the appearance of characteristics Raman bands corresponding to MnO₂ phase for nanostructures of shell size 5.3 ± 1 nm authenticate the presence of CdO as core and MnO₂ as shell in the core/shell nanostructures. Copyright © 2014 John Wiley & Sons, Ltd.     

Mn掺杂ZnSe量子点变温发光性质研究

量子点(QD)照明器件中电流导致的焦耳热会使其工作温度高于室温,因此研究量子点的发光热稳定性十分重要。本文利用稳态光谱和时间分辨光谱研究了具有不同壳层厚度的Mn掺杂ZnSe(Mn: ZnSe)量子点的变温发光性质,温度范围是80～500 K。实验结果表明,厚壳层(6.5单层(MLs))Mn: ZnSe量子点的发光热稳定性要优于薄壳层(2.6 MLs)的量子点。从80 K升温到400 K的过程中,厚壳层Mn: ZnSe量子点的发光几乎没有发生热猝灭,发光量子效率在400 K高温下依然可以达到60%。通过对比Mn: ZnSe量子点的变温发光强度与荧光寿命,对Mn: ZnSe量子点发光热猝灭机制进行了讨论。最后,为了研究Mn: ZnSe量子点的发光热猝灭是否为本征猝灭,对具有不同壳层厚度的Mn: ZnSe量子点进行了加热-冷却循环(300-500-300 K)测试,发现厚壳层的Mn: ZnSe量子点的发光在循环中基本可逆。因此,Mn: ZnSe量子点可以适用于照明器件,即使器件中会出现不可避免的较强热效应。     

Zakharov-Benney resonance as a mechanism for generating extremely short pulses in uniaxial crystals

The possibility of generating an extremely short (without high-frequency filling) pulse of an extraordinary wave in a uniaxial crystal by means of nonlinear interaction with a quasi-monochromatic ordinary wave in the regime of Zakharov-Benney resonance is discussed. It is shown that the appropriate conditions can be created in crystals with positive birefringence, and stable extremely short extraordinary solitons can be created in the spectral range of normal dispersion at the threshold intensity of input pulse on the order of 10¹³–10¹⁴ W/cm².     

Passively mode-locked Nd: YAG and ruby lasers with high brightness per unit active volume

Passively mode-locked Nd: YAG (at room temperature) and ruby (at ≈100 K) lasers with unstable confocal resonators are described. They generated ultrashort pulses with a single pulse energy up to 50 mJ (Nd: YAG) and 50–100 mJ (ruby) and duration ≈40 ps. The active volume was only 5–10 cm³. A beam divergence ≈3 x 10^-4 rad close to the diffraction limit and high brightness of radiation ≈10¹⁷ W cm^-2 srad^-1 were obtained.