Synthesis,characterization, fluorescence and redox features of new <Emphasis Type="Italic">vic</Emphasis>-dioxime ligand bearing pyrene and its metal complexes

A new vic-dioxime ligand, N,N′-bis(aminopyreneglyoxime) (LH₂), and its copper(II), nickel(II) and cobalt(II) metal complexes were synthesized and characterized by elemental analyses, IR, UVVIS and ¹H and ¹³C NMR spectra (for the ligand). Mononuclear complexes were synthesized by a reaction of ligand (LH₂) and salts of Co(II), Ni(II), and Cu(II) in ethanol. The complexes have the metal-ligand ratio of 1: 2 and metals are coordinated by N,N′ atoms of vicinal dioximes. The ligand acts in a polydentate fashion bending through nitrogen atoms in the presence of a base, as do most vic-dioximes. Detection of a H-bonding in the Co(II), Ni(II), and Cu(II) complexes by IR revealed the square-planar MN₄ coordination of mononuclear complexes. Fluorescent properties of the ligand and its complexes arise from pyrene units conjugated with a vic-dioxime moiety. Fluorescence emission spectra of the ligand showed a drastic decrease in its fluorescence intensity upon metal binding. The electrochemical properties of the complexes were studied by the cyclic voltammetry technique. The nickel complex displayed an irreversible oxidation process while the copper complex exhibited a quasi-reversible oxidation and reduction processes based on the copper Cu(II)/Cu(III) and Cu(II)/Cu(I) couples, respectively.     

Binding of Copper(II) to Pectins by Electrochemical Methods

The interaction between Cu(II) and pectin extracted from citrus fruit was studied in KNO₃ 0.10 mol dm^?3 at 25 °C and pH 5.5, using ion selective electrode potentiometry and voltammetry, namely differential pulse polarography and square‐wave voltammetry. Although many independent variables may affect Cu(II)‐polymer interactions such as charge density, polymer concentration and copper to polymer concentration ratio, a good fitting was observed for the model with ML and ML₂ complex species, when M:L total concentration (mol dm^?3) ratio varies from 0.2 to 2.7 and the ligand concentration is in the range (0.2 to 1) g dm^?3, i.e., (0.4 to 2)×10^?3 mol COO^? dm^?3. The complex parameters found in these conditions were log β_CuL=3.5±0.1 and log β_CuL2= 8.0±0.2. For lower total ligand and total metal ion concentrations, used in voltammetry, the interaction Cu(II)‐pectin is affected by a cooperative mode (increase of metal ion‐ligand affinity) when the total metal ion concentration increases and by an anti‐cooperative mode when the total ligand concentration increases, possibly due to different conformations of the polymer.     

Synthesis of ditopic ligands for the selective extraction of copper(II) nitrate and crystal structures of their Cu(II) complexes

We have synthesized two ditopic ligands for selective extraction of copper(II) nitrate. We also synthesized one cation-only binding analog for comparison. All three ligands were characterized by conventional techniques. Competitive two-phase metal ion solvent extraction experiments were performed at 25 °C over a period of 24 h. These ligands showed significant selectivity for Cu(II) ions, having the ditopic ligands extract 81 and 73% of the Cu(II) ions in a solution of different metal ions {Ni(II), Co(II), Cu(II), Zn(II), Cd(II), Pb(II)} at pH 5.09. Competitive transport experiments (water/chloroform/water) were undertaken employing each ligand separately as the ionophore in the membrane (chloroform) phase. No metal ion transport was observed, but a large concentration of Cu(II) was present in the membrane phase. Competitive anion extraction and transport were carried out with the ditopic ligands, yielding selective extraction and transport of nitrate. Furthermore, a pH isotherm of the best ditopic ligand (H₂L²) with Cu(II) was determined from pH 1.0 to 6.0, producing a pH_½ value of approximately 2.6. Finally, crystal structures of the ditopic ligands complexed with Cu(II) were determined and refined. The coordination geometry around the metal centers are distorted square planar and the Cu(II)-donor bond lengths fall within the normal range.     

Synthesis and characterization of a new Schiff base derived from 2,3-diaminopyridine and 5-methoxysalicylaldehyde and its Ni(II), Cu(II) and Zn(II) complexes. Electrochemical and electrocatalytical studies

We describe the synthesis and characterization of a new tetradentate Schiff base ligand obtained from 2,3-diaminopyridine and 5-methoxysalicylaldehyde. This ligand (H₂L) reacted with nickel(II), copper(II), and zinc(II) acetates to give complexes. The ligand and its metal complexes were characterized using analytical, spectral data (UV–vis, IR, and mass spectroscopy), and cyclic voltammetry (CV). The crystal structure of the copper complex was elucidated by X-ray diffraction studies. The electrochemical behavior of these compounds, using CV, revealed that metal centers were distinguished by their intrinsic redox systems, e.g. Ni(II)/Ni(I), Cu(II)/Cu(I), and Zn(II)/Zn(I). Moreover, the electrocatalytic reactions of Ni(II) and Cu(II) complexes catalyze the oxidation of methanol and benzylic alcohol.     

Hydrophobic Effects of o-Phenanthroline and 2,2′-Bipyridine on Adsorption of Metal(II) Ions onto Silica Gel Surface

The effects of o-phenanthroline and 2,2′-bipyridine on the adsorption of metal(II) (Fe, Co, Ni and Cu) ions onto silica gel surface have been studied. The adsorption is expressed in terms of the measured concentrations of both metal and ligand at equilibrium. Each adsorption of the four metal ions is increased with the presence of the ligands. In addition, adsorption increases slowly with pH at low pH values and then increases rapidly up to near the pK_a value of silica gel (≈6.5). The adsorption of each metal ion at low pH is increased with increased ligand concentration. However, at high pH the adsorptions of Fe(II) and Cu(II) are decreased with increased ligand concentration whereas the adsorptions of Co(II) and Ni(II) are always increased. At low pH values the ligand to metal ratio adsorbed on the silica gel surface is ca. 3:1 while at high pH values it is 1:1, 2:1, and 3:1, corresponding to the initial ligand to metal ion concentration ratio. The addition of ethanol to the phenanthroline-SiO₂ solution results in a decrease in the adsorption of phenanthroline. The effect of ethanol is also observed in the Fe(II)-phenanthroline-SiO₂ system. The behavior of the adsorption is interpreted qualitatively by hydrophobic expulsion, the formation of surface complexes, and electrostatic interaction. It is concluded that hydrophobic expulsion plays an important role in the adsorption of metal ions in the presence of hydrophobic ligands on silica gel surface.     

Metal uptake by a novel bidentate thiosemicarbazide chelating polymer

1-Cyanoethanoyl-4-acryloyl thiosemicarbazide (CEATS) has been prepared and polymerized by a free radical mechanism. The polymer PCEATS has chelating affinity, and metal-uptake capacities were determined for the chlorides of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) in the pH range 1.04–6.0. The extraction experiments show high capacity for Cu(II), (0.26?mmol/g) at pH 5.34 and lower uptake capacities for the other divalent metal ions around pH 5 in buffered solutions, under noncompetitive conditions. However, competitive experiments, performed with solutions containing a mixture of metal chloride salts and acetate buffer, showed a high selectivity for Cu(II) and Cd(II) over other cations. Distribution coefficients determined for the polymer and the metal ions indicate that the Cu(II) complex is more stable than the Cd(II) are and suggest that the stability of the complex decreases rapidly with decreasing pH. Kinetic experiments have shown that uptake of Cu(II), is slow, with t _0.5?=?10?h. Ligand regeneration experiments for Cu(II)-loaded PCEATS performed with 2.00?M H₂SO₄ have shown that the capacity for Cu(II) stays at the same level after several cycles of consecutive loading and stripping, indicating that the polymer is chemically stable. ESR spectra of Cu(II)–CEATS resin show that there are two different coordination complexes present in the polymer. IR spectra of the Cu(II) complex confirms the bidentate behavior (S, O; N, O) of CEATS and PCEATS (it is supposed that the cations bridge vicinal CEATS ligands through S, O and N, O atoms); the acetate group completes the octahedral coordination. The obtained data suggest that the polymer behaves as a bidentate ligand via the thiocarbonyl, carbonyl and imide groups. PCEATS and its complexes have an inhibitory effect on both the bacterium Azotobacter and the fungus Fusarium oxysporium. The effect on the microorganisms is proportional to the amount of free ligand in the complex.     

Synthesis and Characterization of a Novel Phosphonate Metal Organic Framework Starting from Copper Salts

Abstract

Increased interest in the area of metal phosphonate inorganic–organic frameworks is exemplified with a high range of applications and a rich synthetic and structural chemistry of these compounds. The synthesis and potential applications of a novel metal phosphonate, namely Cu(II) phenylvinylphosphonate (PVP) is described in this paper. Syntheses were performed starting from a 1:1 molar ratio of a Cu(NO₃)₂·6H₂O or CuSO₄·5H₂O and 1-phenylvinylphosphonic acid under hydrothermal conditions at pH values ranging between 2.8 and 3.1. The influence of different counterion for the copper salt used as the Cu(II) source on the structure and crystallinity of the final product was studied. The obtained copper(II) phenylvinylphosphonate compounds were characterized by X-ray powder diffraction, FT-IR spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and energy-dispersive X-ray spectrometry (EDAX). A possible crystal structure for the copper (II) phenylvinylphosphonate products is proposed using semiempirical approaches.     

Synthesis and structural studies of (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}pyridin-2-yl)imino]butan-2-one oxime, ligand and its mono-, di- and trinuclear copper(II) complexes

A new dioxime ligand, (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}-pyridin-2-yl)imino]butan-2-one oxime, (H₂Pymdo) (3) has been synthesized in H₂O by reacting 2,3-butenedione monoxime (2) with 2,6-diaminopyridine. Mono-, di- and tri-nuclear copper(II) complexes of the dioxime ligand (H₂Pymdo) and/or 1,10-phenanthroline have been prepared. The dioxime ligand (H₂Pymdo) and its copper(II) complexes were characterized by ¹H-n.m.r., ¹³C-n.m.r. and elemental analyses, magnetic moments, i.r. and mass spectral studies. The mononuclear copper(II) complex of H₂Pymdo was found to have a 1:1 metal:ligand ratio. Elemental analyses, stoichiometric and spectroscopic data of the metal complexes indicated that the metal ions are coordinated to the oxime and imine nitrogen atoms (C=N). In the dinuclear complexes, in which the first Cu(II) ion was complexed with nitrogen atoms of the oxime and imine groups, the second Cu(II) ion is ligated with dianionic oxygen atoms of the oxime groups and are linked to the 1,10-phenanthroline nitrogen atoms. The trinuclear copper(II) complex (6) was formed by coordination of the third Cu(II) ion with dianionic oxygen atoms of each of two molecules of the mononuclear copper(II) complexes. The data support the proposed structure of H₂Pymdo and its Cu(II) complexes.     

Synthesis,spectral, and biological studies of transition metal chelates of N-[1-(3-aminopropyl)imidazole]salicylaldimine

Tridentate chelate complexes M[LX?·?2H₂O], where M?=?Co(II), Ni(II), Cu(II), Zn(II), and Cd(II) have been synthesized from the Schiff base L?=?N-[1-(3-aminopropyl)imidazole]salicylaldimine and X?=?Cl. Microanalytical data, UV-Vis, magnetic susceptibility, IR, ¹H-NMR, mass, and EPR techniques were used to confirm the structures. Electronic absorption spectra and magnetic susceptibility measurements suggest square-planar geometry for copper complex and octahedral for other metal complexes. EPR spectra of copper(II) complex recorded at 300?K confirm the distorted square-planar geometry of the copper(II) complex. Biological activities of the ligand and metal complexes have been studied on Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans by the well diffusion method. The activity data show the metal complexes to be more potent than the parent ligand against two bacterial species and one fungus. The electrochemical behavior of the copper complex was studied by cyclic voltammetry.     

Transition metal complexes of acetamidomalondihydroxamate: synthesis,spectral, thermal and electrochemical studies

Acetamidomalondihydroxamate (K₂AcAMDH) and its manganese(II), iron(II), cobalt(II), nickel(II), copper(II) and zinc(II) complexes were synthesized and characterized by elemental analysis, UV–VIS, IR and magnetic susceptibility. The pK _a1 and pK _a2 values of the dihydroxamic acid in aqueous solution were found to be 8.0?±?0.1 and 9.7?±?0.1. The dihydroxamate anion AcAMDH behaves as a tetradentate bridging ligand through both hydroxamate groups, forming complexes with a metal to ligand ratio of 1?:?1 in the solid state. The FTIR spectra and thermal decompositions of the ligand and its metal complexes were recorded. The redox behavior of the complexes was investigated in aqueous solution by square wave voltammetry and cyclic voltammetry at neutral pH. In contrast to the solid state, in solution the copper(II) and zinc(II) ions form stable complex species with a metal to ligand ratio of 1?:?2. The iron(II) and nickel(II) complexes show a two-electron irreversible reduction behavior, while the copper(II) and zinc(II) complexes undergo reversible electrode reactions. The stability constants of the complexes were determined by square wave voltammetry.     

Homo‐ and heteropolynuclear copper(II) complexes containing a new diimine–dioxime ligand and 1,10‐phenanthroline: synthesis,characterization, solvent‐extraction studies,catalase‐like functions and DNA cleavage abilities

A series of homo‐, heterodinuclear and homotrinuclear copper(II) complexes containing a new Schiff base ligand and 1,10‐phenanthroline were synthesized. Based on results of elemental analyses, FTIR, ¹H‐ and ¹³C‐NMR spectra, conductivity measurements and magnetic susceptibility measurements, the complexes had general compositions {[Cu(L)(H₂O)M(phen)₂](ClO₄)₂ [M = Cu(II), Mn(II), Co(II)]} and {[Cu₃(L)₂(H₂O)₂](ClO₄)₂}. The metal:L:phen ratio is 2:1:2 for the dinuclear copper(II) complexes and the metal:L ratio was 3:2 for the trinuclear copper(II) complex. The liquid–liquid extraction of various transition metal cations [Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pb(II), Cd(II), Hg(II)] from the aqueous phase to the organic phase was carried out using the diimine–dioxime ligand. It was concluded that the ligand can effectively be used in solvent extraction of copper(II) from the aqueous phase to the organic phase. Furthermore, catalytic activitiy of the complexes for the disproportionation of hydrogen peroxide was also investigated in the presence of imidazole. Dinuclear copper(II)–manganese(II) complex has some similarity to manganese catalase in structure and activity. The interaction between these complexes and DNA has also been investigated by agarose gel electrophoresis; we found that the homo‐ and heterodinuclear copper complexes can cleave supercoiled pBR322 DNA to nicked and linear forms in the presence of H₂O₂. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Structural Elucidation of N,N ’-Ditosyl-1,11-diaza-4,8,14,18-tetraselena-cycloicosane and its Copper and Platinum Complexes

The reaction of 1,2-diselenacyclopentane with N,O,O-tri-(toluene-p-sulphonate)-diethanolamine afforded a new seleno-azacrown ether, i.e. N,N′-ditosyl-1,11-diaza-4,8,14,18-tetraselena cycloicosane (1), in 19% yield, which was comprehensively characterized by elemental analysis, UV–Vis, ¹H NMR and mass spectroscopy. The reaction of 1 with copper(II) perchlorate (Cu(ClO₄)₂) and platinum(IV) tetrachloride (PtCl₄) gave its corresponding copper (2) and platinum complexes (3), respectively. The crystallographic investigations showed that the disparity of metal ion led not only to the distinct crystal system and space group, i.e. monoclinic system (C2/c) for 2 and triclinic system (P-1) for 3, but also the different coordination modes of copper and platinum ions with 1, i.e. normal coordination mode for 2 and ring-contracted coordination mode for 3. Moreover, the metal ions in the crystals 2 and 3 were found in Cu(I) and Pt(II) forms, respectively, although Cu(II) and Pt(IV) were used at the initial stage of coordination reaction.     

Complexation in the copper(ii)—L-histidine—D-ornithine system as studied by ESR spectroscopy

Equilibria in the copper (ii)—L-histidine—D-ornithine system were investigated by ESR spectroscopy in an aqueous solution in the pH range 2—11. Analysis of the spectrum lineshape at different pH and ligand to metal ratios showed that the mixed-ligand complexes Cu(OrnH)(HisH₂)⁴⁺, Cu(OrnH₂)(HisH)³⁺, and Cu(Orn)(His) occur in the system along with the binary complexes. The stability constants, g-factors, HFC constants, and relaxation parameters of the complexes were determined, and the structures of the complexes were suggested.     

Fluorescence Quenching Study on the Interaction of Some Schiff Base Complexes with Bovine Serum Albumin

The interaction of Schiff base ligand A and its three metal complexes [A‐Fe(II), A‐Cu(II), and A‐Zn(II)] with bovine serum albumin (BSA) was investigated using a tryptophan fluorescence quenching method. The Schiff base ligand A and its three metal complexes all showed quenching of BSA fluorescence in a Tris‐HCl buffer. Quenching constants were determined for quenching BSA by the Schiff base ligand A and its metal complexes in a Tris‐HCl buffer (pH=7.4) at different temperatures. The experimental results show that the dynamic quenching constant (K_SV) was increased with increasing temperature, whereas the association constant (K) was decreased with the increase of temperature. The thermodynamic parameters ΔH, ΔG and ΔS at different temperatures were calculated. The ionic strength of the Tris‐HCl buffer had a great influence on the wavelength of maximum emission of BSA. Under low ionic strength, the emission spectra of BSA influenced by A‐Zn(II) had a small blue shift. Compared to A‐Zn(II), the emission spectra of BSA in the presence of the Schiff base ligand A and A‐Cu(II) had no significant λ_em shift. At high ionic strength, the emission spectra of BSA upon addition of the Schiff base A, A‐Fe(II), and A‐Zn(II) all had a red shift, but the emission spectra of BSA had λ_em shift neither at low ionic strength, nor at high ionic strength in the presence of A‐Cu(II). Furthermore, the temperature did not affect the λ_em shift of BSA emission spectra.     

Synthesis,Characterization and Antifungal Activity of Metal Complexes of 2-(5-((2-Chlorophenyl)Diazenyl)-2-Hydroxybenzylidene) Hydrazinecarbothioamide

Abstract

New metal complexes of Co(II), Cu(II), Ni(II), Zn(II), Mn(II), Fe(III), Ru(III), UO₂(II), and VO(II) with the Schiff base, 2-(5-((2-chlorophenyl)diazenyl)-2-hydroxy- benzylidene) hydrazine-carbothioamide (H₂L) have been prepared and characterized by elemental and thermal analyses, FT-IR, UV–Vis, mass spectra, ¹H-NMR, and ESR as well as conductivity and magnetic moments measurements. The IR spectra showed that the ligand acts as neutral tridentate, neutral bidentate or monobasic tridentate ligand. The geometries of metal complexes were either octahedral or square pyramidal. The ESR spectra of the solid copper(II) complexes indicated an axial symmetry type of a d_(x2-y2) ground state with considerably ionic or covalent environment. The effect of the presence of an azo group on the biological activity of the ligand was investigated. The ligand and its complexes are biologically inactive due to the presence of azo group.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the related elements to view the free supplemental file.     

New metal complexes derived from S-benzyldithiocarbazate (SBDTC) and chromone-3-carboxaldehyde: synthesis,characterization, antimicrobial,antitumor activity and DFT calculations

Novel monobasic tridentate ONS donor ligand (HL) was synthesized from the condensation reaction of chromone-3-carboxaldehyde with S-benzyldithiocarbazate (SBDTC). Reaction of the ligand with the metal ions copper(II), nickel(II), cobalt(II), oxidovanadium(IV), cerium(III), manganese(II), zinc(II), and cadmium(II) afforded dimeric complexes with the general formula [ML(Y)_m(H₂O)_x]₂·(Y)_m·nH₂O·zCH₃OH, Y?=?NO₃ or Cl, m?=?0–2, x?=?0–2, n?=?0–2, and z?=?0–1 for all complexes except oxidovanadium(IV) complex which has the formula [VOL(H₂O)]₂(SO₄). Structures of the ligand and its metal complexes were established through elemental, spectroscopic data (FT-IR, UV-Vis, and mass), thermal analyses, as well as conductivity and magnetic susceptibility measurements. The geometrical structures of the metal complexes are octahedral and square planar. The ligand and its complexes were subjected to in vitro bioassays against the gram-negative and gram-positive bacteria and the fungus strain with good results for some of these compounds. The antitumor activity of the ligand and its copper(II) and oxidovanadium(IV) complexes were investigated against HepG2 cell line. The molecular parameters of the ligand and its metal complexes have been calculated on the basis of DFT level implemented in the Gaussian 09 program, and computed data were correlated with the experimental results. The HOMO→LUMO electron transition potentially occurs from S-benzyldithiocarbazate to chromone moieties with 4.048?eV. The Mn(II) complex has the highest value of energy barrier, while Cu(II) complex has the lowest value among the complexes. All synthesized complexes have energy gap lower than free ligand and therefore these complexes are more reactive than the free ligand.     

Spectroscopic and extraction studies of new transition metal complexes with N,N ′- bis (2-aminothiophenol)-1, 4- bis (2-carboxaldehydephenoxy)butane

Metal complexes of La(III), Cu(II) and Ni(II) with a thio Schiff base derived from 1,4-bis(2-carboxaldehydephenoxy)butane and 2-aminothiophenol have been synthesized in absolute ethanol and characterized by microanalytical data, magnetic measurements, ¹H NMR, ¹³C NMR, UV-visible, IR-spectra, mass spectra and conductance measurements. The extractability of divalent cations was evaluated as a function of relationship between distribution ratios of the metal and pH or ligand concentration. The highest extraction percentage of Cu⁺² and Ni⁺² were at pH 7.0 and 6.4, respectively. The ligand can effectively be used in solvent extraction of copper(II) and nickel(II) from aqueous phase to organic phase.     

Reactions of Bis(β-Alaninato) Metal(II) Complexes with Formaldehyde and Benzamide: The Crystal Structure of Bis[N-Methyl-N-(N′-Methyl-Benzamido)-β-Alaninato]Copper(II) Monohydrate and Characterization of Bis[N,N-DI(N′-Methylbenzamido)-β-Alaninato]Metal(II) Complexes

The bis[N-methyl-N-(N'-methylbenzamido)-β-alaninato]copper(II), Cu(II)[Me-MeBA]₂, is synthesized by reacting bis(β-alaninato)copper(II) with formaldehyde and benzamide in the presence of a base (NaOH) over the pH range 5.5-8.5. However, the bis[N,N-di (N'-methylbenzamido)-β-alaninato]metal(II) complexes, M(II)[DMeBA]₂ (M = Zn, Ni, Co), are obtained when the respective bis(β-alaninato)metal(II) reacts with formaldehyde and benzamide in the presence of the base in similar pH ranges. Nevertheless, Cu(II)[DMeBA]₂ can be synthesized if the reaction is carried out in the absence of base. The M(II)[DMeBA]₂ complexes are characterized by elemental analysis, IR and UV-Visible spectroscopy and magnetic susceptibility measurements. X-ray crystal structure analysis of Cu(II)[Me-MeBA]₂ suggests that the N'-methylbenzamido substituent of the β-alanine moiety is formed through Mannich aminomethylation, and that the other N-methyl substituent is formed via a Canizzaro-type methylation.     

Carboxylate ion dependency in the Cu(II) catalysed asymmetric Henry reaction: Structural characterisation of a tridentate Schiff base complex containing a coordinated carboxylic acid

Six tridentate Schiff base ligands containing tertiary butyl or benzyl substituents were prepared from chiral amino alcohols and salicylaldehyde derivatives. The ligands were employed as catalysts for the Cu(II) catalysed asymmetric Henry reaction. It was discovered that when different carboxylate salts were used instead of copper acetate as the Cu(II) salt, significant changes in the enantioselectivity of the reactions were observed. Addition of Cu(OAc)₂ to the ligand prepared from salicylaldehyde and α,α‐diphenyl‐tert ‐leucinol resulted in the formation of dark green crystals. X‐ray structural analysis of these crystals showed that a square planar monomeric complex had been formed rather than the expected dimer. In the structure, the copper(II) centre is bonded to the tridentate ONO ligand and an acetate ion. There is a strong hydrogen bond between the protonated alcoholic oxygen of the Schiff base ligand and the uncoordinated acetate oxygen atom. These results, taken together, indicate that the carboxylate anion may be an important part of the active intermediate when this type of copper complex is used as a catalyst in the asymmetric Henry reaction.     

Complexes of Cobalt(II), Nickel(II) and Copper(II) Chloroacetates with Quinoline N-Oxide

Some 1:1 and 1:2 adducts of cobalt(II), nickel(II) and copper(II) chloroacetates with quinoline N -oxide have been isolated by the interaction of the appropriate metal chloroacetate with quinoline N -oxide (QuinNo). The complexes isolated are of 1:1 stoichiometry of formula [M(CH₃_xClxCOO)₂QuinNO] (when M=Co(II), Ni(II); X=1,2 and 3 and when M=Cu(II), X=l and 2) except copper(II) trichloroacetate which yields an adduct of 1:2 stoichiometry of formula[Cu(CCI₃COO)₂(QuinNO)₂]. The adducts isolated are soluble in common organic solvents.