Modulation of Mucor miehei lipase properties via directed immobilization on different hetero-functional epoxy resins: Hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid

Purified lipase from Mucor miehei (MML) has been covalently immobilized on different epoxy resins (standard hydrophobic epoxy resins, epoxy-ethylenediamine, epoxy-iminodiacetic acid, epoxy-copper chelates) and adsorbed via interfacial activation on octadecyl-Sepabeads support (fully coated with very hydrophobic octadecyl groups). These immobilized enzyme preparations were used under slightly different conditions (temperature ranging from 4 to 25 °C and pH values from 5 to 7) in the hydrolytic resolution of (R,S)-2-butyroyl-2-phenylacetic acid.

Different catalytic properties (activity, specificity, enantioselectivity) were found depending on the particular support used. For example, the epoxy-iminodiacetic acid-Sepabeads gave the most active preparation at pH 7 while, at pH 5, the ethylenediamine-Sepabeads was superior.

More interestingly, the enantiomeric ratio (E) also depends strongly on the immobilized preparation and the conditions employed. Thus, the octadecyl-MML preparation was the only immobilized enzyme derivative which exhibited enantioselectivity towards R isomer (with E values ranging from 5 at 4 °C and pH 7 to 1.2 at pH 5 and 25 °C).

The other immobilized preparations, in contrast, were S selective. Immobilization on iminodiacetic acid-Sepabeads afforded the catalyst with the highest enantioselectivity (E=59 under optimum conditions).     

Covalent immobilization of pure isoenzymes from lipase of Candida rugosa

Covalent immobilization of pure lipases A and B from Candida rugosa on agarose and silica is described. The immobilization increases the half-life of the biocatalysts ( ) with respect to the native pure lipases ( ). The percentage immobilization of lipases A and B is similar in both supports (33–40%). The remaining activity of the biocatalysts immobilized on agarose (70–75%) is greater than that of the enzymatic derivatives immobilized on SiO₂ (40–50%). The surface area and the hydrophobic/hydrophilic properties of the support control the lipase activity of these derivatives. The thermal stability of the immobilized lipase A derivatives is greater than that of lipase B derivatives. The nature of the support influences the thermal deactivation profile of the immobilized derivatives. The immobilization in agarose (hydrophilic support) gives biocatalysts that show a greater initial specific reaction rate than the biocatalysts immobilized in SiO₂ (hydrophobic support) using the hydrolysis of the esters of (R) or (S) 2-chloropropanoic and of (R,S) 2-phenylpropanoic acids as the reaction test. The enzymatic derivatives are active for at least 196 h under hydrolysis conditions. The stereospecificity of the native and the immobilized enzymes is the same.     

Kinetic and modelling studies on the lipase catalysed enantioselective esterification of (±)-perillyl alcohol

Several lipases were kinetically studied with the aim to exploit their enantioselectivity in the esterification of (S)-(−) and (R)-(+)-perillyl alcohol with decanoic acid. Most of the lipases studied exhibited stereopreference towards the R-enantiomer with apparent E-values from 3.8 to 0.6, calculated as the initial esterification rates ratio for the individual enantiomers. In an attempt to interpret the structural basis of enantioselectivity, modelling studies were performed with two of these lipases, Candida cylindracea lipase (CcL) and Pseudomonas cepacia lipase (PcL) based on their previously determined X-ray crystal structures. The results derived from modelling studies confirm their stereopreferences towards the R-enantiomer, since increased conformational energy of the S-ester was found compared to the R-ester.     

Resolution of 1,3-dioxolane derivatives using the lipase from an Acinetobacter junii SY-01

Acinetobacter junii SY-01 producing a lipase enantioselectively hydrolyzing 1,3-dioxolane derivatives was isolated from water sludge sample and the effect of solvent, acyl donor, vinyl acetate concentration, substrate concentration, operating temperature and immobilization on activity and enantioselectivity was studied for the resolution of 1,3-dioxolane derivatives through transesterification reaction using a lipase from the isolated strain. Best selectivity was obtained at lower substrate concentration (3–5 mM), higher vinyl acetate concentration (500–1000 mM) and lower temperature (30–40 °C) in the reaction mixture. Lipase immobilized onto Accurel MP-1000 (micro-porous polypropylene) gave the best results and the reactivity was about 29-fold higher than the free enzyme without the decrease of enantioselectivity. Resolution of 1,3-dioxolane derivatives was carried out in flask scale containing 100 ml solvents using the lipase immobilized onto Accurel MP-1000. In this reaction, the yield and enantiomeric excess of the remaining (2R, 4S)-alcohol were 31.2% and 98.2%, respectively. This result suggests that it can be used as an alternative method, compared to the present synthetic method, for the production of optically pure (2R, 4S)-itraconazole.     

Catalytic performance of a highly enantioselective (R)-ester hydrolase from a new isolate Acinetobacter sp. CGMCC 0789

A highly enantioselective (R)-ester hydrolase was partially purified from a newly isolated bacterium, Acinetobacter sp. CGMCC 0789, whose resting cells exhibited a highly enantioselective activity toward the acetate of (4R)-hydroxy-3-methyl-2-(2-propynyl)- cyclopent-2-enone (R-HMPC). The optimum pH and temperature of the partially purified enzyme were 8.0 and 60 °C, respectively. The enantioselectivity of the crude enzyme was increased by 1.2-fold from 16 to 20 when the reaction temperature was raised from 30 to 60 °C. The activity of the crude enzyme was enhanced by 4.1-fold and the enantioselectivity (E-value) was markedly enhanced by 4.3-fold from 16 to 68 upon addition of a cationic detergent, benzethonium chloride [(diisobutyl phenoxyethoxyethyl) dimethyl benzylammoniom chloride]. The hydrolysis of 52 mM (R,S)-HMPC acetate to (R)-HMPC was completed within 8 h, with optical purity of 91.4% ee_p and conversion of 49%.     

Novel microbial epoxide hydrolases for biohydrolysis of glycidyl derivatives

Microbial isolates from biofilters and petroleum-polluted bioremediation sites were screened for the presence of enantioselective epoxide hydrolases active towards tert-butyl glycidyl ether, benzyl glycidyl ether, and allyl glycidyl ether. Out of 270 isolated strains, which comprised bacteria, yeasts, and filamentous fungi, four were selected based on the enantioselectivities of their epoxide hydrolases determined in biotransformation reactions. The enzyme of Aspergillus niger M200 preferentially hydrolyses (S)-tert-butyl glycidyl ether to (S)-3-tert-butoxy-1,2-propanediol with a relatively high enantioselectivity (the enantiomeric ratio E is about 30 at a reaction temperature of 28 °C). Epoxide hydrolases of Rhodotorula mucilaginosa M002 and Rhodococcus fascians M022 hydrolyse benzyl glycidyl ether with relatively low enantioselectivities, the former reacting predominantly with the (S)-enantiomer, the latter preferring the (R)-enantiomer. Enzymatic hydrolysis of allyl glycidyl ether by Cryptococcus laurentii M001 proceeds with low enantioselectivity (E = 3). (R)-tert-Butyl glycidyl ether with an enantiomeric excess (ee) of over 99%, and (S)-3-tert-butoxy-1,2-propanediol with an ee-value of 86% have been prepared on a gram-scale using whole cells of A. niger M200. An enantiomeric ratio of approximately 100 has been determined under optimised biotransformation conditions with the partially purified epoxide hydrolase from A. niger M200. The regioselectivity of this enzyme was determined to be total for both (S)-tert-butyl glycidyl ether and (R)-tert-butyl glycidyl ether.     

Enantioselective hydrolysis of (R,S)-naproxen 2,2,2-trifluoroethyl ester in water-saturated solvents via lipases from Carica pentagona Heilborn and Carica papaya

A crude lipase prepared from Carica pentagona Heilborn latex was explored as an effective enantioselective biocatalyst for the hydrolytic resolution of (R,S)-naproxen 2,2,2-trifluoroethyl ester in water-saturated organic solvents. Comparisons of the enzyme performance with that from Carica papaya lipase indicated that both lipases showed low tolerance to the hydrophilic solvent and were inhibited by (S)-naproxen and 2,2,2-trifluoroethanol. Improvements on the enzyme activity and enantioselectivty were demonstrated when both lipases in partially purified forms were employed. By using the thermodynamic analysis, the enantiomeric discrimination was mainly driven by the difference of activation enthalpy for all reaction systems except for employing Carica papaya lipase as the biocatalyst for (R,S)-fenoprofen 2,2,2-trifluoroethyl thioester.     

Improvement of the functional properties of a thermostable lipase from alcaligenes sp. via strong adsorption on hydrophobic supports

Lipase QL from Alcaligenes sp. is a quite thermostable enzyme. For example, it retains 75% of catalytic activity after incubation for 100 h at 55 °C and pH 7.0. Nevertheless, an improvement of the enzyme properties was intended via immobilization by covalent attachment to different activated supports and by adsorption on hydrophobic supports (octadecyl-sepabeads). This latter immobilization technique promotes the most interesting improvement of enzyme properties: (a) the enzyme is hyperactivated after immobilization: the immobilized preparation exhibits a 135% of catalytic activity for the hydrolysis of p-nitrophenyl propionate as compared to the soluble enzyme; (b) the thermal stability of the immobilized enzyme is highly improved: the immobilized preparation exhibits a half-life time of 12 h when incubated at 80 °C, pH 8.5 (a 25-fold stabilizing factor regarding to the soluble enzyme); (c) the optimal temperature was increased from 50 °C (soluble enzyme) up to 70 °C (hydrophobic support enzyme immobilized preparations); (d) the enantioselectivity of the enzyme for the hydrolysis of glycidyl butyrate and its dependence on the experimental conditions was significantly altered. Moreover, because the enzyme becomes reversibly but very strongly adsorbed on these highly hydrophobic supports, the lipase may be desorbed after its inactivation and the support may be reused. Very likely, adsorption occurs via interfacial activation of the lipase on the hydrophobic supports at very low ionic strength. On the other hand, all the covalent immobilization protocols used to immobilize the enzyme hardly improved the properties of the lipase.     

The lid is a structural and functional determinant of lipase activity and selectivity

In several lipases access to the enzyme active site is regulated by the position of a mobile structure named the lid. The role of this region in modulating lipase function is reviewed in this paper analysing the results obtained with three different recombinant lipases modified in the lid sequence: Candida rugosa lipase isoform 1 (CRL1), Pseudomonas fragi lipase (PFL) and Bacillus subtilis lipase A (BSLA). A CRL chimera enzyme obtained by replacing its lid with that of another C. rugosa lipase isoform (CRL1LID3) was found to be affected in both activity and enantioselectivity in organic solvent. Variants of the PFL protein in which three polar lid residues were replaced with amino acids strictly conserved in homologous lipases displayed altered chain length preference profile and increased thermostability. On the other hand, insertion of lid structures from structurally homologous enzymes into BSLA, a lipase that naturally does not possess such a lid structure, caused a reduction in the enzyme activity and an altered substrate specificity. These results strongly support the concept that the lid plays an important role in modulating not only activity but also specifity, enantioselectivity and stability of lipase enzymes.     

Lipolytic enzymes with improved activity and selectivity upon adsorption on polymeric nanoparticles

Nanostructured polystyrene (PS) and polymethylmethacrylate (PMMA) were used as carriers for the preparation of bioconjugates with lipolytic enzymes, such as Candida rugosa lipase (CRL) and Pseudomonas cepacia lipase (PCL). Simple addition of the lipase solution to the polymeric nanoparticles under protein-friendly conditions (pH 7.6) led to the formation of polymer-enzyme bioconjugates. Energy filtered-transmission electron microscopy (EF-TEM) performed on immuno-gold labeled samples revealed that the enzyme preferentially binds to the polymer nanoparticles and that the binding does not affect the nanostructured features of the carriers. The studies performed on the activity of the bioconjugates pointed out that the lipases adsorbed onto polymeric nanoparticles show an improved performance in terms of activity and selectivity with respect to those shown by lipases adsorbed on the same non-nanostructured carriers. The residual activities of CRL and PCL immobilized on nanostructured PMMA and PS reached 60% and 74%, respectively. Moreover, we found that enantioselectivity and pH and thermal stability increase upon immobilization. These results highlight the fact that new protein conformers with improved enantioselectivity stabilized after adsorption on nanoparticles are obtained. On the basis of the chemical structures of the selected polymers and the slopes of the adsorption isotherms, a hydrophobic binding model for lipase/nanostructured polymers is suggested.     

Lipase-catalyzed kinetic resolutions of racemic β- and γ-thiolactones

Several racemic β- and γ-thiolactones were synthesized and kinetic resolutions of them were executed using lipases. While a lipase from Pseudomonas cepacia (PCL) showed the highest enantioselectivity for (S)-form (>99% ee_S at 53% conversion, E > 100) in the kinetic resolution of racemic -methyl-β-propiothiolactone (rac-MPTL), it showed no hydrolysis activity in the kinetic resolution of -benzyl--methyl-β-propiothiolactone (rac-BMPTL), suggesting that the changes in the size of alkyl group from rac-MPTL to rac-BMPTL leads to lower hydrolysis activity and enantioselectivity. In contrast, racemic γ-butyrothiolactones were hydrolyzed by several lipases with low enantioselectivity, whereas a lipase from Candida antarctica (CAL) showed moderate enantioselectivity for (S)-form (>99% ee_S at 76% conversion, E = 11) in the kinetic resolution of racemic -methyl-γ-butyrothiolactone (rac-MBTL). Computer-aided molecular modeling was also performed to investigate the enantioselectivites and activities of PCL toward β-propiothiolactones. The computer modeling results suggest that the alkyl side chains of β-propiothiolactones and γ-butyrothiolactones interact with amino acid residues around hydrophobic crevice, which affects the activity of PCL.     

Preparation of new lipases derivatives with high activity–stability in anhydrous media: adsorption on hydrophobic supports plus hydrophilization with polyethylenimine

A novel method to prepare immobilized lipases derivatives is hereby proposed. Lipases are firstly adsorbed on supports having large internal surfaces covered by hydrophobic groups (e.g. polyacrylic resins covered by C18 moieties). Then, immobilized lipases are incubated in the presence of polyethyleneimine (PEI) at a pH value over the isoelectric point of the enzyme in order to cover the lipase surface with this polymer. In this way, we try to minimize all possible direct interactions between immobilized lipase and organic solvents when using these derivatives in anhydrous media.

Lipases from Rhizomucor miehie (RML) and Candida rugosa (CRL) were immobilized according to the proposed protocol. These derivatives were very active and very stable when catalyzing esterifications and transesterifications in anhydrous media. For example, RML derivatives exhibited a very high synthetic activity (more than 1000 Units/g immobilized biocatalyst) even when catalyzing the esterification of lauric acid with octanol at water activity values very close to zero. On the contrary, covalently immobilized derivatives exhibited a much lower synthetic activity under similar conditions (less than 10 Units/g of immobilized biocatalyst). Moreover, these new RML derivatives preserve 100% activity after incubation for 3 days in anhydrous butanone in the presence of molecular sieves. Under the same conditions, commercial immobilized RML lost more than 90% of activity in less than 10 min.     

Lipase-catalyzed optical resolution of trifluoro(aryl)ethanols

Optical resolutions of racemic 2,2,2-trifluoro-1-(aryl)ethanols — (1-naphthyl), (2-naphthyl), (4-methylnaphthyl), (phenyl), (1-pyrenyl) — were achieved by lipase-catalyzed enantioselective acetylations with vinyl acetate as an acetyl donor in octane, and (S)-acetates and (R)-alcohols were obtained. Among the lipases tested, lipase from Pseudomonas aeruginosa (lipase LIP, Toyobo) showed good enantioselectivity for above ethanols. However, no acetylation occurred with sterically hindered alcohols — (9-phenanthryl), (9-anthryl), (2-methylnaphthyl), (2, 4, 6-trimethylphenyl) — by various lipases. The resolutions of the three alcohols were carried out by the enantioselective alcoholysis or hydrolysis of their chloroacetates by lipase LIP.     

Biocatalytic preparation of (S)-phenyl glycidyl ether using newly isolated Bacillus megaterium ECU1001

A bacterial strain (ECU1001) capable of utilizing phenyl glycidyl ether as sole carbon source and energy source was isolated from soil samples through two steps of screening and was identified as a Bacillus megaterium. The epoxide hydrolase from Bacillus megaterium ECU1001 was biosynthesized in parallel with cell growth and a maximum activity of 31.0 U/l was reached after 30 h of culture when the biomass (DCW) was 9.1 g/l. A temperature of 35°C and pH 8.0 were optimal for the bioconversion. The lyophilized whole cells of Bacillus megaterium ECU1001 could preferentially hydrolyze the (R)-enantiomer of phenyl glycidyl ether, yeilding (S)-epoxide and (R)-diol with high enantioselectivity (E=47.8). The (S)-enantiomer of the epoxide remained in the reaction mixture with >99.5% ee (enantiomeric excess) at a conversion of 55.9%. The substrate concentration could be increased up to 60 mM without affecting the ee and (S)-phenyl glycidyl ether could be obtained with an optical purity of 100% ee and 25.6% yield. Therefore, the method is potentially useful for the preparative resolution of epoxides.     

Impressive effect of immobilization conditions on the catalytic activity and enantioselectivity of Candida rugosa lipase toward S-Naproxen production

Candida rugosa lipase (CRL) was immobilized on Amberlite XAD 7 and the advantage of immobilization under the best reaction conditions in achieving high activity and enantioselectivity was shown for the hydrolysis of racemic Naproxen methyl ester. The performance of CRL was found to be better when the enzyme was immobilized at the temperature and pH values where higher conversion and enantioselectivity were obtained. The effects of immobilized lipase load, temperature, pH and substrate concentration on the conversion and enantioselectivity toward S-Naproxen production in aqueous phase/isooctane biphasic batch system were also evaluated. The increase in immobilized lipase load in 320–800 U/mL range increased the conversion of the substrate and enantioselectivity for S-Naproxen. The kinetic resolution of racemic Naproxen methyl ester conducted at the temperatures of 40, 45 and 50 °C and at the pH values of 4, 6, 7.5 and 9 resulted in the highest conversion and enantioselectivity at 45 °C and pH 6. Higher concentration of racemic Naproxen methyl ester than 10 mg/mL decreased both the conversion and enantioselectivity. CRL, which was immobilized at the temperature and pH values where the enzyme was more enantioselective, was successfully used in three successive batch runs each of 180 h. The highest enantiomeric ratio achieved in the S-Naproxen production was 174.2 with the conversion of 49%.     

Lipase-catalyzed enantioselective hydrolysis of methyl 2-fluoro-2-arylpropionates in water-saturated isooctane

Lipases from Candida rugosa, Candida antartica B and Carica papaya are employed as the biocatalyst for the hydrolytic resolution of methyl 2-fluoro-2-arylpropionates in water-saturated isooctane, in which excellent to good enantioselectivity without the formation of byproducts is obtained for the papaya lipase when using (R,S)-2-fluoronaproxen methyl ester (1) and methyl (R,S)-2-fluoro-2-(4-methoxyphenyl)propionate (2), but not methyl (R,S)-2-fluoro-2-(naphth-1-yl)propionate (3) as the substrates. The thermodynamic analysis indicates that the enantiomer discrimination for the papaya lipase is driven by the difference in activation enthalpy for compound 1, 2 or (R,S)-naproxen methyl ester (4). The kinetic analysis also demonstrates that in comparison with (S)-4, the insertion of the 2-fluorine moiety in (R)-1 has increased k₂, but not K_m, and consequently the lipase activity.     

Overexpression of Serratia marcescens lipase in Escherichia coli for efficient bioresolution of racemic ketoprofen

Lipase from Serratia marcescens ECU1010 was cloned and overexpressed in E. coli. After optimization, the maximum lipase activities reached 5000–6000 U/l and this recombinant lipase could enantioselectively hydrolyze (S)-ketoprofen esters into (S)-ketoprofen. Among six alkyl esters of racemic ketoprofen investigated, this lipase showed the best enantioselectivity for the kinetic resolution of ketoprofen ethyl ester, with an ee_p (enantiomeric excess of product) of 91.6% and E-value of 63 obtained at 48.2% conversion. Twelve nonionic surfactants were tested for enhancing the enantioselectivity of this lipase in the bioresolution of ketoprofen ethyl ester. A very high E-value of 1084 was achieved, with an optical purity of >99% ee_p and a yield of 42.6% in the presence of 3% Brij 92V. Further studies showed that the selectivity of the lipase was improved with the increase of Brij 92V concentration. The substrate (ketoprofen ethyl ester) does not inhibit the lipase activity, while the product (S)-ketoprofen inhibits the lipase activity to some extent. These results indicate that the S. marcescens lipase is very useful for biocatalytic production of chiral profens such as (S)-ketoprofen.     

Enantiomeric oxidation of organic sulfides by the filamentous fungi Botrytis cinerea, Eutypa lata and Trichoderma viride

The biotransformations of a series of substituted sulfides were carried out with the filamentous fungi Botrytis cinerea, Eutypa lata and Trichoderma viride. Several products underwent microbial oxidation of sulfide to sulfoxide with medium to high enantiomeric purity. With regard to sulfoxide enantioselectivity, the (R)-enantiomer was favoured in biotransformations by T. viride and E. lata while the (S)-enantiomer was favoured in those by B. cinerea. A minor amount of sulfone product was also obtained.     

Lipase-catalyzed production of optically active (S)-flurbiprofen in aqueous phase reaction system containing chiral succinyl β-cyclodextrin

The lipase-catalyzed production of optically active (S)-flurbiprofen was carried out in a dispersion reaction-system induced by chiral succinyl β-cyclodextrin (suβ-CD). The optimal reaction conditions were 500 mM (R,S)-flurbiprofen ethyl ester ((R,S)-FEE), 600 units of Candida rugosa lipase per 1 mmol of (R,S)-FEE, and 1000 mM suβ-CD at 37 °C for 72 h. An extremely high enantiomeric excess of 0.98 and conversion yield of 0.48 were achieved in the dispersed aqueous phase reaction system containing chiral suβ-CD added as a dispenser and chiral selector. The inclusion complex formability of the immiscible substrate (S)- and (R)-form of FEE with suβ-CD was compared using a phase-solubility diagram, DSC, and ¹H NMR. (S)-Isomer formed a more stable and selective inclusion complex with chiral suβ-CD. It was hydrolyzed much more selectively by lipase from C. rugosa, due to the selective structural modification through inclusion complexation with chiral suβ-CD.     

Immobilized cells biocatalyst for the production of S-acetylthio-2-methyl propionic acid

S-acetylthio-2-methylpropionic acid (S-AMPA) is an important chiral intermediary for numerous hypertension drugs such as captopril. S-AMPA can be produced by hydrolyzing the corresponding racemic methyl MAMP (S,R-methyl-β-acetylthioisobutyrate) by lipases or esterases that have the appropriate stereo specificity. Psudomonas fluorescens IFO 12055 possessing a highly specific lipase was used to process this reaction in the form of immobilized cells. Reaction kinetic and immobilization methods were also studied. Strong product inhibition was observed, that is, at 3% S-AMPA (namely 183 mM), activity was reduced by 50%. Spontaneous hydrolysis of the ester and thioester bonds was also observed, and was independent of the cells. Thus, reaction selectivity and yield must be optimized through adjusting the substrate concentration and total biocatalyst activity. Conventional calcium alginate (3% w/w) encapsulation was modified by adding 3% w/w polyethyleneimine (PEI) and cross-linked by a biologically derived agent, genipin (5.6 mM). This method was found to be satisfactory to produce stable and functioning biocatalyst and can maintain high reactivity for repeated 25 batches with e.e. values above 90%.