Synthesis of Gd3PO7:Eu nanospheres via a facile combustion method and optical properties

Eu³⁺-doped Gd₃PO₇ nanospheres with an average diameter of ∼300 nm and a narrow size distribution have been prepared by a facile combustion method and structurally characterized by X-ray diffraction and field emission scanning electron microscopy. The luminescent properties were systemically studied by the measurement of excitation/emission spectra, and emission spectra under different temperatures, as well as by photostability. The strong red-emission intensity peaking at 614 nm originates the ⁵D₀→⁷F₂ transition and is observed under 254-nm irradiation, indicating that Eu³⁺ ions in Gd₃PO₇ mainly occupied non-centrosymmetry sites. The CIE1931 XY chromaticity coordinates of Gd₃PO₇:Eu³⁺ nanospheres are (x=0.654, y=0.345) in the red area, which is near the National Television Standard Committee standard chromaticity coordinates for red. Thus, Gd₃PO₇:Eu³⁺ nanospheres may be potential red-emitting phosphors for PDP and Xe-based mercury-free lamps.     

Sonochemical synthesis and luminescence properties of single-crystalline BaF2:Eu nanospheres

BaF₂ nanocrystals doped with 5.0 mol% Eu³⁺ has been successfully synthesized via a facile, quick and efficient ultrasonic solution route employing the reactions between Ba(NO₃)₂, Eu(NO₃)₃ and KBF₄ under ambient conditions. The product was characterized via X-ray powder diffraction (XRD), scanning electron micrographs (SEM), transmission electron microscopy (TEM), high-resolution transmission electron micrographs (HRTEM), selected area electron diffraction (SAED) and photoluminescence (PL) spectra. The ultrasonic irradiation has a strong effect on the morphology of the BaF₂:Eu³⁺ particles. The caddice-sphere-like particles with an average diameter of 250 nm could be obtained with ultrasonic irradiation, whereas only olive-like particles were produced without ultrasonic irradiation. The results of XRD indicate that the obtained BaF₂:Eu³⁺ nanospheres crystallized well with a cubic structure. The PL spectrum shows that the BaF₂:Eu³⁺ nanospheres has the characteristic emission of Eu^{3+ 5}D₀-⁷F_J (J=1-4) transitions, with the magnetic dipole ⁵D₀-⁷F₁ allowed transition (590 nm) being the most prominent emission line.     

Morphology control and luminescence properties of BaMgAl10O17:Eu phosphors prepared by spray pyrolysis

Starting from the aqueous solutions of metal nitrates with citric acid and polyethylene glycol (PEG) as additives, BaMgAl₁₀O₁₇:Eu²⁺ (BAM:Eu²⁺) phosphors were prepared by a two-step spray pyrolysis (SP) method. X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectra were used to characterize the resulted BAM:Eu²⁺ phosphors. The obtained BAM:Eu²⁺ phosphor particles have spherical shape, submicron size (0.5-3 μm). The effects of process conditions of the spray pyrolysis, such as molecular weight and concentration of PEG, on the morphology and luminescence properties of phosphor particles were investigated. Adequate amount of PEG was necessary for obtaining spherical particles, and the optimum emission intensity could be obtained when the concentration of PEG was 0.03 g/ml in the precursor solution. Moreover, the emission intensity of the phosphors increased with increasing of metal ion concentration in the solution. Compared with the BAM:Eu²⁺ phosphor prepared by citrate-gel method, spherical BAM:Eu²⁺ phosphor particles showed a higher emission intensity.     

Photoluminescence of new red phosphor SrZnO2:Eu

SrZnO₂:Eu³⁺ has been synthesized by solid-state reaction and its photoluminescence in ultraviolet (UV)-vacuum ultraviolet (VUV) range was investigated. The broad bands around 254 nm are assigned to CT band of Eu³⁺-O²⁻. With the increasing of Eu³⁺ concentration, Eu³⁺ could occupy different sites, which leads to the broadening of CT band. A sharp band is observed in the region of 110-130 nm, which is related to the host absorption. The phosphors emit red luminescence centered at about 616 nm due to Eu³⁺⁵D₀→⁷F₂ both under 254 and 147 nm, but none of Eu²⁺ blue emission can be observed.     

Rietveld refinement and photoluminescent properties of a new blue-emitting material: Eu activated SrZnP2O7

A new efficient blue phosphor, Eu²⁺ activated SrZnP₂O₇, has been synthesized at 1000 °C under reduced atmosphere and the crystal structure and photoluminescence properties have been investigated. The crystal structure of SrZnP₂O₇ was obtained via Rietveld refinement of powder X-ray diffraction (XRD) pattern. It was found that SrZnP₂O₇ crystallizes in space group of P2₁/n (no. 14), Z=4, and the unit cell dimensions are: a=5.30906(2) Å, b=8.21392(3) Å, c=12.73595(5) Å, β=90.1573(3)°, and V=555.390(3) Å³. Under ultraviolet excitation (200-400 nm), efficient Eu²⁺ emission peaked at 420 nm was observed, of which the luminescent efficiency at the optimal concentration of Eu²⁺ (4 mol%) was estimated to be 96% as that of BaMgAl₁₀O₁₇:Eu²⁺. Hence, the SrZnP₂O₇:Eu²⁺ exhibit great potential as a phosphor in different applications, such as ultraviolet light emitting diode and photo-therapy lamps.     

A novel blue-emitting phosphor LiSrPO4:Eu for white LEDs

A novel blue-emitting phosphor, LiSrPO₄:Eu²⁺, was prepared by the solid-state reaction and X-ray powder diffraction (XRD) analysis confirmed the formation of LiSrPO₄:Eu²⁺. Photoluminescence (PL) results showed that the phosphor can be efficiently excited by UV-visible light from 250 to 440 nm, and exhibited bright blue emission. The effects of the doped-Eu²⁺ concentration in LiSrPO₄:Eu²⁺ on the PL were investigated in detail. The results showed that the relative PL intensity increases with Eu²⁺-concentration increasing until a maximum intensity is reached, and then it decreases due to concentration quenching and a red-shift appears, which are explained satisfactorily with the luminescent theory. Upon excited with 396 nm light, the present synthesized phosphor has higher emission intensity than that from the commercial blue phosphor, BaMgAl₁₀O₁₇:Eu²⁺. Bright blue light-emitting diodes were fabricated by the combination of the synthesized LiSrPO₄:Eu²⁺ with ∼397 nm emitting InGaN-based chips.     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).     

Luminescence enhancement of Eu, Ce co-doped Ba3Si5O13−δNδ phosphors

Host lattice Ba₃Si₅O_13−δN_δ oxonitridosilicates have been synthesized by the traditional solid state reaction method. The lattice structure is based on layers of vertex-linked SiO₄ tetrahedrons and Ba²⁺ ions, where each Ba²⁺ ion is coordinated by eight oxygen atoms forming distorted square antiprisms. Under an excitation wavelength of 365 nm, Ba₃Si₅O_13−δN_δ:Eu²⁺ and Ba₃Si₅O_13−δN_δ:Eu²⁺,Ce³⁺ show broad emission bands from about 400-620 nm, with maxima at about 480 nm and half-peak width of around 130 nm. The emission intensity is strongly enhanced by co-doping Ce³⁺ ions into the Ba₃Si₅O_13−δN_δ:Eu²⁺ phosphor, which could be explained by energy transfer. The excitation band from the near UV to the blue light region confirms the possibility that Ba₃Si₅O_13−δN_δ:Eu²⁺, Ce³⁺ could be used as a phosphor for white LEDs.     

Fabrication and optical properties of core-shell structured spherical SiO2@GdVO4:Eu phosphors via sol-gel process

Europium-doped nanocrystalline GdVO₄ phosphor layers were coated on the surface of preformed submicron silica spheres by sol-gel method. The resulted SiO₂@Gd_0.95Eu_0.05VO₄ core-shell particles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra, low voltage cathodoluminescence (CL), time resolved PL spectra and kinetic decays. The XRD results demonstrate that the Gd_0.95Eu_0.05VO₄ layers begin to crystallize on the SiO₂ spheres after annealing at 600 ^°C and the crystallinity increases with raising the annealing temperature. The obtained core-shell phosphors have spherical shape, narrow size distribution (average size ca. 600 nm), non-agglomeration. The thickness of the Gd_0.95Eu_0.05VO₄ shells on the SiO₂ cores could be easily tailored by varying the number of deposition cycles (50 nm for four deposition cycles). PL and CL show that the emissions are dominated by ⁵D₀-⁷F₂ transition of Eu³⁺ (618 nm, red). The PL and CL intensities of Eu³⁺ increase with increasing the annealing temperature and the number of coating cycles. The optimum concentration for Eu³⁺ was determined to be 5 mol% of Gd³⁺ in GdVO₄ host.     

Fabrication and luminescent properties of the core-shell structured YNbO4:Eu/Tb@SiO2 spherical particles

The core-shell structured YNbO₄:Eu³⁺/Tb³⁺@SiO₂ particles were realized by coating the YNbO₄:Eu³⁺/Tb³⁺ phosphors onto the surface of spherical silica via a sol-gel process. The obtained materials were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform IR spectroscopy (FT-IR), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra. The results indicate that 600 °C annealed samples consist of amorphous silica core and crystalline YNbO₄:Re shell, having perfect spherical morphology with uniform size distribution. Upon excitation by UV or electron beam, these phosphors show the characteristic ⁵D₀-⁷F_1-4 emission lines of Eu³⁺ and the characteristic ⁵D₄-⁷F_3-6 emission lines of Tb³⁺. The PL intensities of Eu³⁺ can be tuned by altering the annealing temperature and the coating number of YNbO₄:Eu³⁺ layers.     

A novel red emitting phosphor Ca2SnO4: Eu

A novel red emitting phosphor, Eu³⁺-doped Ca₂SnO₄, was prepared by the solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the formation of Ca₂SnO₄: Eu³⁺. Field-emission scanning electron-microscopy (FE-SEM) observation indicated a narrow size-distribution of about 500 nm for the particles with spherical shape. Photoluminescence measurements indicated that the phosphor exhibits bright red emission at about 615 nm under UV excitation. The excellent luminescence properties make it possible as a good candidate for plasma display panels (PDP) application. Splitting of the ⁵D₀-⁷F_J transitions of Ca₂SnO₄: Eu³⁺ suggests that the Eu³⁺ ions occupied two nonequivalent sites in the crystallite. The luminescence lifetime measurement showed a bi-exponential decay, providing other evidence for the existence of two different environments for Eu³⁺ ions.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Preparation and photoluminescence property of a loose powder, Ca3Al2O6:Eu by calcination of a layered double hydroxide precursor

A novel red light-emitting material, Ca₃Al₂O₆:Eu³⁺, which is the first example found in the Ca₃Al₂O₆ host, was prepared by calcination of a layered double hydroxide precursor at 1350 °C. The precursor, [Ca_2.9−xAl₂Eu_x(OH)_9.8](NO₃)_2+x·2.5H₂O, was prepared by coprecipitation of metal nitrates with sodium hydroxide. The material is a loose powder composed of irregular particles formed from aggregation of particles of a few nanometers, as shown in scanning electron microscope (SEM) images. It was found that the photoluminescence intensity reached the maximum when the calcination temperature was 1350 °C and the concentration of Eu³⁺ was 1.0%. The material emits bright red emission at 614 nm under a radiation of λ=250 nm.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi^3＋ and EH^3＋ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet（VUV） excitation were investigated. The VUV photoluminescent intensity of Y2O2S：Eu^3＋ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S：Eu^3＋,Bi^3＋ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S：Eu^3＋,Bi^3＋ at 147 nm is mainly because the Bi^3＋ acts as a medium and effectively performs the energy transfer process： Y^3＋-O^2-→Bi^3＋→Eu^3＋, while the intense emission band at 172 nm is attributed to the absorption of the characteristic ^1So-^1P1 transition of Bi^3＋ and the direct energy transfer from Bi^3＋ to Eu^3＋. The Y2O2S：Eu^3＋,Bi^3＋ shows excellent VUV optical properties compared with the commercial （Y,Gd）BO3：Eu^3＋. Thus, the Y2O2S：Eu^3＋,Bi^3＋ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.     

Rare-Earth Actived Sol-Gel Films for Scintillator Applications

Recently, there has been a growth of interest in new phosphors preparation for high resolution X-rays imaging systems. Sol-gel method has been used to synthesize europium doped gadolinium and lutetium oxide films. Structural and optical results are investigated and discussed on both Gd₂O₃:Eu³⁺ (5 mol%) and Lu₂O₃:Eu³⁺ (5 mol%). Those films are crystallized into cubic phase and present a density of 7.1 g/cm³ and 8.4 g/cm³ for Gd₂O₃:Eu³⁺ and Lu₂O₃:Eu³⁺ respectively. Room temperature emission spectra using an excitation of 468 nm was used to obtain the intense red emission ⁵D₀ ⁷F₂ (611 nm) of Eu³⁺. Scintillation properties at 611 nm are finally proved using X-rays excitation.     

Synthesis and luminescence properties of nanocrystalline YVO4:Eu

Nanocrystalline YVO₄:Eu³⁺ was synthesized by direct precipitation reaction, which was then annealed at different temperatures. The results of XRD showed that nanocrystalline YVO₄:Eu³⁺ could be obtained in solution at 60 °C, and the mean particle sizes of samples are increased as annealing temperature is increased. The results of TEM exhibit that the sizes of samples are around 5-30 nm. Studies on the excitation spectra show that there are a large number of the structural distortions in smaller particles. By analyzing line splitting patterns and peaks broadening in the emission spectra, we consider that the deviations in intensity patterns of ⁵D₀-⁷F₂ are affected by distortions of crystal lattice. Some abnormal behaviors can be attributed to higher ratio of surface to volume, which lead to the different local symmetry environment of Eu³⁺ ions on the surface.     

Synthesis of the complex fluoride LiBaF3 and optical spectroscopy properties of LiBaF3:M(M=Eu,Ce) through a solvothermal process

The complex fluoride LiBaF₃ and LiBaF₃:M(M=Eu, Ce) is solvothermally synthesized at 180°C and characterized by means of X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. In the solvothermal process, the solvents, molar ratios of initial mixtures and reaction temperature play important roles in the formation of products. The excitation and emission spectra of the LiBaF₃:M(M=Eu,Ce) have been measured by fluorescence spectrophotometer. In the LiBaF₃:Eu emission spectra, there is one sharp line emission located at 360 nm arising from f→f transition of Eu²⁺ in the host lattice, and typical doublet 5d-4f emission of Ce³⁺ in LiBaF₃ powder is shown.     

Solvothermal synthesis and luminescent properties of monodisperse LaPO4:Ln (Ln=Eu, Ce, Tb) particles

Monodisperse rare-earth ion (Eu³⁺, Ce³⁺, Tb³⁺) doped LaPO₄ particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 °C and assigned to the monoclinic monazite-type structure of the LaPO₄ phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO₄:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO₄:Eu³⁺ phosphors show the characteristic ⁵D₀−⁷F_1-4 emission lines of Eu³⁺, while the LaPO₄:Ce³⁺, Tb³⁺ phosphors demonstrate the characteristic ⁵D₄−⁷F_3-6 emission lines of Tb³⁺.     

A re-investigation of the crystal structure and luminescence of BaCa2MgSi2O8:Eu

Barium calcium magnesium silicate (BaCa₂MgSi₂O₈), a compound whose space group was obtained via X-ray diffraction data, was re-investigated using neutron diffraction techniques. A combined powder X-ray and neutron Rietveld method revealed that BaCa₂MgSi₂O₈ crystallizes in the trigonal space group P3? (Z=1, a=5.42708(5) Å, c=6.79455(7) Å, V=173.310(4) Å³; R_p/R_wp=5.52%/7.63%), instead of the previously believed space group P3?m1. The difference in the two structures arises from the displacement of the O2 atom. Blue emission from Ba_0.98Eu_0.02Ca₂MgSi₂O₈ under 325-nm excitation is ascribed to the 4f⁶5d¹→4f⁷ transitions of Eu²⁺ ions at Ba sites and Ca sites. Site assignment of Eu²⁺ ions in the titled compound was performed by analysis of emission spectra at temperatures in the range of 4.2-300 K.     

Photoluminescence properties of a novel phosphor, Na3La9O3(BO3)8:RE(RE=Eu,Tb)

The new oxyborate phosphors, Na₃La₉O₃(BO₃)₈:Eu³⁺ (NLBO:Eu) and Na₃La₉O₃(BO₃)₈:Tb³⁺ (NLBO:Tb) were prepared by solid-state reactions. The photoluminescence characteristics under UV excitation were investigated. The dominated emission of Eu³⁺ corresponding to the electric dipole transition ⁵D₀→⁷F₂ is located at 613 nm and bright green luminescence of NLBO:Tb attributed to the transition ⁵D₄→⁷F₅ is centered at 544 nm. The concentration dependence of the emission intensity showed that the optimum doping concentration of Eu and Tb is 30% and 10%, respectively.