电感耦合等离子体原子发射光谱(ICP-AES)法测定高温合金中5种非金属元素

研究了快速测定高温合金中5种非金属元素(As,B,P,Se,Si)的分析方法,以满足高温合金行业对非金属元素检测的需求。利用王水、氢氟酸和酒石酸对高温合金进行酸溶解,系统研究了基体元素和共存元素对分析元素谱线的光谱干扰情况,同时进行了分析谱线的选择。5种非金属元素的检出限在5.0~12.0μg/mL,5次数据的相对标准偏差(RSD,n=5)为1.1%~4.0%,各元素的加标回收率在96%~102%,方法适用于高温合金中非金属元素的测定。     

微波等离子体炬发射光谱法测定高温合金中非金属元素

研究了微波等离子体炬原子发射光谱(MPT-AES)法测定高温合金中非金属元素(As、B、P、Si)的分析方法,考察此方法对高温合金行业非金属检测需求的适应性。对镍基高温合金样品进行酸溶解处理,选择适用的微波等离子体炬分析谱线,进行检出限、精密度测定。4种非金属元素的检出限在0.03~0.12μg/mL,10次数据的相对标准偏差(RSD,n=10)为0.88%~1.9%,此方法可用于高温合金中非金属元素的测定。     

微波等离子体炬原子发射光谱法测定高温合金中非金属元素

研究了微波等离子体炬原子发射光谱(MPT-AES)法测定高温合金中非金属元素(As、B、P、Si)的分析方法,考察此方法对高温合金行业非金属检测需求的适应性。对镍基高温合金样品进行酸溶解处理,选择适用的微波等离子体炬分析谱线,进行检出限、精密度测定。4种非金属元素的检出限在0.03~0.12μg/mL,10次数据的相对标准偏差(RSD,n=10)为0.88%~1.9%,此方法可用于高温合金中非金属元素的测定。     

ICP—AES法测定含高钽镍基高温合金中的硼

采用ICP-AES法测定含高钽(4%～7%)镍基高温合金中的硼元素.通过试验探讨了镍基高温合金中基体元素,主量元素如铬、钴、钨、钼、钽、铌、铼等对硼元素分析谱线的光谱干扰情况,采用基体匹配法对基体干扰进行校正,确定了合适的分析谱线.方法的线性范围为0～4mg/L,检出限为0.0005%.测定结果的相对标准偏差为0.99%～2.60%(n-8),回收率为94.0%-97.3%.     

ICP-AES法测定镍基高温合金中的铂

采用电感耦合等离子体原子发射光谱法测定镍基高温合金中铂元素。通过实验探讨了镍基高温合金中基体元素镍,主量元素如铬、钴、铝、钼、镍、钽等对铂元素测量的干扰情况,确定了适合的分析谱线。测定结果的相对标准偏差不大于6.55%(n=6),加标回收率为94%～105%。该法可用于镍基高温合金中铂元素的测定。     

微波消解-ICP-AES法测定钴基合金中的硼

采用微波消解-ICP-AES法测定钴基合金中硼元素。通过试验探讨了钴基高温合金中基体元素,主量元素如铬、钨、钼等对硼元素分析谱线的光谱干扰情况,采用基体匹配法对基体干扰进行校正,确定了合适的分析谱线。方法的线性范围为0～8 mg/L,检出限为0.0003%。测定结果的相对标准偏差为1.88%～6.04%(n=6),回收率为92.0%～104.2%。     

电感耦合等离子体原子发射光谱法测定镍基高温合金中铬、钛、铌、铝、铁、硼的含量

在对各元素的分析谱线的选择及基体元素镍对相关元素测定的干扰作了系统研究的基础上,提出用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定镍基高温合金中铬、钛、铌、铝、铁及硼6种合金元素的方法。上述6种元素的检出限(3s/k)在0.006 9~0.13 mg.L-1范围内。取GH 33镍基高温标准样品按所提出方法分析,测定值与标准值相互一致,测得相对标准偏差值(n=10)均小于1.5%。在基体镍溶液中加入各被测元素的标准溶液做回收试验,上述6种元素的回收率在98.3%~101.0%之间。为对此方法的准确性作进一步考核,对GH 4145高温镍基合金样品进行分析,各元素的测定值与国家标准方法的测定值相符合。     

电感耦合等离子体发射光谱（ICP-OES）法测定镍-铬基高温合金GH4133B中铝、铌、钛、铬、铁

GH4133B是Ni-Cr基沉淀硬化型变形高温合金,近年来我国还没有适宜的国家检测标准,基于此对样品主要元素含量准确测定方法进行了研究和探讨。采用盐酸-硝酸体系对GH4133B镍基高温合金进行溶解,确定了盐酸和硝酸比列为8∶3,混合酸用量为11 mL,用ICP-OES法快速准确地对GH4133B镍基高温合金中铝、铌、钛、铬、铁元素含量进行测定;确定了各元素分析谱线为Al 396.152nm、Nb 309.417nm、Ti 334.941nm、Cr 267.716nm、Fe 238.204nm;建立了校准工作曲线,各元素线性相关系数均在0.999以上;优化仪器参数,消除基体干扰,测定了方法检出限,各元素检出限均小于0.003%,各元素测定结果的RSD/%在0.26%～0.47%(n=7),加标回收率在99.4%～105%。有效解决了GH4133B镍基高温合金快速有效溶解及准确测定问题。     

电感耦合等离子体光谱法测定镍基高温合金中的硅、锰、磷

建立了电感耦合等离子体光谱测定镍基高温合金中硅、锰、磷元素的方法,优化了试样前处理方法,对前处理所用酸的酸度进行不同比例试验,确定了仪器测量条件及分析谱线.在一定浓度范围内,各元素的浓度与谱线强度呈线性关系,相关系数大于0.9999.加标回收率为93.3%～106.7%,测定结果的相对标准偏差小于3.0%(n=10)....     

电感耦合等离子体发射光谱法测定铋黄铜合金中微量元素

利用ICP-AES(电感耦合等离子体发射光谱仪)研究了铋黄铜合金中铋、锑、铅、砷、铝、铁元素的测定方法,对仪器参数、分析谱线、干扰情况等因素进行了研究,确定了合适的谱线,并对铋黄铜合金进行精密度和回收实验。结果表明,相对标准偏差小于5%,回收率在94%～106%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.