CaSO_4晶须补强增韧聚氨酯弹性体机理的研究

提高聚氨酯弹性体的力学性能是聚氨酯研究领域里普遍关心的课题之一,一般采用刚性粒子和纤维类无机填料增强聚氨酯弹性体,但上述填料在提高强度的同时,会导致韧性降低,空易造成脆性断裂,因此填料能否同时补强增韧聚氨酯弹性体具有重要的实际应用价值,晶须是一种单晶纤维状材料,其直径极小,几乎不存在任何缺陷,由于内在的完整性,高度有序的原子排列,使其强度接近晶体理论－－原子间价键的强度,晶须凭借微细的直径、较短的长度、极高的强度,成为一种新型补强增韧剂,目前晶须的复合基体多为陶瓷基、金属基和树脂基,有关复合基体多为陶瓷基、金属基和树脂基,有关复合聚氨酯弹性体的理论及应用研究报道很少,本文制备了具有较高强度和韧性的CaSO4晶须／聚氨酯弹性体复合材料,通过微观分析揭示了CaSO4晶须对聚氨酯弹性体补强增韧的机理,并对其影响因素进行了讨论。     

改性纳米硼酸锌晶须增强聚乙烯阻燃材料力学性能的研究

以硼砂、硝酸锌及氢氧化钠为原料,采用液相原位合成的方法制备纳米硼酸锌晶须。通过红外光谱(FT-IR)、X-射线衍射(XRD)、扫描电镜(SEM)等对其进行结构表征,测得硼酸锌晶须的直径约为80~100nm,长径比在20~50之间;同时,在制备的过程中加入表面活性剂磷酸三辛酯对晶须进行改性,使之成为疏水性硼酸锌。将疏水性纳米硼酸锌晶须应用于聚乙烯(PE)的阻燃中,在满足材料阻燃性能的同时还考察了对复合材料力学性能的影响,通过拉伸及抗冲击等测试,发现晶须的加入对复合材料有着良好的增强作用。     

利用原位微纤化技术控制聚合物形态的研究进展

综述了利用原位微纤化技术控制聚合物形态的研究进展,简要介绍了原位微纤化共混物的概念、制备方法、影响成纤的因素及常见原位微纤化体系等,讨论了原位微纤化技术对碳纳米管(CNTs)/聚碳酸酯(PC)/聚乙烯(PE)、碳黑(CB)/对苯二甲酸乙二醇酯(PET)/PE及纳米碳酸钙(nano-CaCO3)/CB/PET/PE等体系的形态调控以及体系形态与力学性能、电学性能的关系,简要介绍了原位微纤化技术在废旧塑料回收方面的应用,最后阐述了原位微纤化技术的重要性并展望了其应用前景.     

溶胶-凝胶法制备丙烯酸树脂/TiO2有机-无机杂化材料及其结构表征

通过预水解的二氧化钛(TiO2 )溶胶与丙烯酸树脂共混或原位聚合的方法制备了均匀透明的丙烯酸树脂 TiO2 有机 无机杂化材料.考察了TiO2 溶胶制备方法、聚合物中—COOH官能团含量和杂化材料制备方法对杂化材料结构的影响.索氏抽提实验表明聚合物中的羧酸官能团和无机TiO2 相间发生了交联反应,且随着—COOH官能团含量的增加,交联程度增大.小角X射线散射(SAXS)结果发现,杂化材料中TiO2 为疏松的三维网状结构,且在纳米尺度范围内,但这种三维网状结构随着TiO2 溶胶制备中水或酸的用量增加,其致密度增加,尺寸增大.同原位聚合法相比,共混法可制备出更均匀的杂化体系,且TiO2 为单分散.     

RAFT聚合制备PBMA/AA-SiO2杂化纳米材料

以三硫代二[4-(甲氧羰基)苄基]碳酸酯为链转移剂(CTA),甲基丙烯酸丁酯(BMA)为单体,通过可逆加成-断裂链转移自由基聚合(RAFT)法修饰丙烯酸(AA)功能化的纳米二氧化硅(SiO2),制备了PBMA/AA-SiO2有机/无机杂化纳米材料。并通过FT-IR、GPC、TGA、TEM表征和分析了杂化材料的结构、分子量、SiO2纳米粒子在基体中的分散性以及杂化材料的热稳定性。结果表明,PBMA/AA-SiO2杂化微球粒径约为22 nm,分布均匀;TGA分析表明此杂化材料的热稳定性良好,PBMA接枝率为19%。     

长链超支化聚酯改性纳米SiO_2及其在丁苯橡胶中的应用

利用二乙醇胺和丙烯酸甲酯合成的N,N-二羟乙基-3-胺基丙酸甲酯作为AB2型单体,以纳米SiO_2为核,通过其表面羟基与单体的反应,制得SiO_2接枝超支化聚酯的纳米粒子(SiO_2-HBP);再利用超支化端羟基与α-己内酯进行开环反应,合成了含柔性长链的二氧化硅-长链超支化聚酯杂化物(SiO_2-HBP-L);然后将杂化物与丁苯橡胶共混,制备了SiO_2-HBP-L/SBR纳米复合材料.FTIR、XPS和TGA测试证实改性后纳米SiO_2表面接枝了含长链超支化聚酯.SEM测试结果表明,相对于未改性的纳米SiO_2,SiO_2-HBP-L在乙醇和橡胶基体中分散性较好,且改性后纳米SiO_2与复合材料的相容性明显提高.硫化性能测试表明,SiO_2-HBP-L能大大缩短胶料的正硫化时间,增大总交联密度;同时SiO_2-HBP-L/SBR纳米复合材料的力学性能和耐磨性能有较大的提高,很好地实现了补强.     

原子转移自由基聚合在锂电池用聚合物电解质设计中的应用

聚合物电解质(PE)由于具有无液体渗漏、界面相容性好、热和化学稳定，制备工艺简单等优点，成为下一代高能量密度锂电池用电解质的最佳候选。然而，没有任何一种聚合物能同时满足锂电池用PE对于力学性能和电化学性能的要求，因此人们通过共混、交联等手段来对PE基体的成分和结构进行改性，以期提升PE的综合性能。通过传统的自由基聚合方法得到的PE基体的成分和结构不易控制，阻碍了PE的理论和改进研究。原子转移自由基聚合(ATRP)技术通过活性种和休眠种之间的可逆平衡使自由基维持在较低浓度，可以实现PE上接枝的支链分子量的调控和精细结构的设计，为制备力学性能和电化学性能相协调的PE提供了有效途径。而且，由于ATRP引发基团的可设计性，在PE无机填料的改性和界面性能的优化上均具有突出的优势，对于聚合物基纳米复合聚合物电解质膜的锂电池综合性能提升具有重要意义。本文综述了ATRP技术在PE的基体制备、填料改性及界面优化中的应用，并对其未来发展方向做出了展望。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

二元乙丙橡胶的环氧官能化及其增韧尼龙6的研究

在双螺杆挤出机中制备了环氧官能化的二元乙丙橡胶(gEPR) ,采用红外光谱工作曲线法测量了EPR的接枝率.将环氧官能化的EPR与尼龙6 (Nylon- 6 )熔融共混,并对共混体系的相形态、断裂形貌、增韧机理、力学性能进行了研究.结果表明,gEPR的环氧官能团与Nylon- 6的端羧基和(或)端氨基发生了化学反应生成Nylon -6 co EPR共聚物,该共聚物作为界面改性剂降低了Nylon -6与EPR之间的界面张力,使EPR在Nylon -6基体中均匀、稳定地分散,而且随着EPR接枝率的增加,EPR的粒径尺寸逐渐减小.断面形貌观察发现,与Nylon -6 EPR体系相比,Nyon -6 gEPR共混体系呈现明显的韧性断裂特征.通过对Nylon -6 gEPR共混体系缺口冲击形变区的研究得出EPR增韧Nylon -6的机理是橡胶粒子的空洞化和塑料基体的剪切屈服.力学性能测试表明gEPR的引入显著提高了Nylon -6的缺口冲击强度.     

自由基引发八甲基丙烯酸酯基笼型倍半硅氧烷在多壁碳纳米管表面的可控包覆

以FeSO4/K2S2O8为反应的引发剂,通过均相和非均相聚合体系,制备了聚八甲基丙烯酸酯基笼型倍半硅氧烷(PMMA-POSS)包覆的多壁碳纳米管核-壳型纳米杂化材料.透射电子显微镜显示,在均相体系中可以得到包覆均匀且厚度可调的多壁碳纳米管杂化材料,包覆厚度在15~25 nm,35~50 nm之间,非均相体系中得到了PMMA-POSS微球悬挂在碳纳米管侧壁的杂化材料.通过傅里叶红外光谱(FTIR)、拉曼光谱(Raman)以及热重分析(TGA)对杂化材料进行了表征,并给出了可能的包覆机理.     

液晶离聚物

液晶离聚物是一种兼具液晶高分子和离聚物结构特征的新型聚合物。本文根据有关文献就其分类，合成，表征作了简要的综述，并对其研究发展前景进行了必要的讨论。     

侧链液晶离聚物对PA1010/PP共混体系的增容作用

将聚酰胺（PA1010）、聚丙烯（PP）和热致型侧链液晶离聚物（SLCI）进行熔融共混，采用FTIR，SEM，DSC，WAXD研究测定了共混物中的相互作用，用形态结构，热行为和结晶行为，系统地研究了SLCI对PA101／PP共混物的增容作用。结果表明，SLCI有效地改善了PA1010／PP共混物的形态结构，增强了PA1010与PP链间的相互作用，使PA1010／PP熔点升高，结晶度提高。     

离聚物对含液晶聚合物聚砜体系的增容作用

离聚物对含液晶聚合物聚砜体系的增容作用刘杰，何嘉松（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词增容作用，离子聚合物，热致液晶聚合物，高分子共混物，原位复合材料工程塑料与液晶聚合物（Ｌｒｙ）共混（形成所谓的原位复合材料）时在降低...     

Synthesis and characterization of polyethylene‐g‐polystyrene as the compatibilizer for polypropylene/ Polystyrene blends

Polyethylene‐g‐polystyrene (PE‐g‐PS) was synthesized as a compatibilizer for polypropylene/polystyrene­(PP/PS) blends by the living radical polymerization of styrene with polyethylene‐co‐glycidylmethacrylate (PE‐co‐GMA). The compatibilizer effect of PE‐g‐PS on the morphology and thermal properties of PP/PS blends was investigated. The crystalline temperature of PP in PP/PS blends decreased with increasing PE‐g‐PS contents. Morphologies of PP/PE‐g‐PS/PS blends showed much better dispersion of each domain for higher PE‐g‐PS contents. The molecular weight of PS segment in PP/PE‐g‐PS/PS blend was increased by addition of styrene monomer during the post melt blending process where post living radical polymerization reaction proceeded. Copyright © 2003 John Wiley & Sons, Ltd.     

Blends of polycarbonate and ethylene-1-octylene copolymer

The mechanical properties and morphology of polycarbonate/ethylene-1-octylene copolymer (PC/POE) binary blends and PC/POE/ionomer ternary blends were investigated. The tensile strength and elongation at break of the PC/POE blends decreased with increasing the POE content. The impact strength of the PC/POE blends showed less dependence on thickness than that of PC. And the low-temperature impact strength of PC was modified effectively by addition of POE. The morphology of the PC/POE blends was observed by scanning electron microscope. The PC/POE weight ratio had a great effect on the morphology of the PC/POE blends. For the PC/POE (80/20)/ionomer ternary blends, low content (0.25 and 0.5 phr) of ionomer could increase the tensile properties of PC/POE (80/20) blend and had little effect on the impact strength. And 0.5 phr ionomer made the dispersed domain distribute more uniformly and finely than the blend without it. But with high content of ionomer, the degradation of PC made the mechanical properties of the blends deteriorate. Blending PC and ionomer proved the degradation of PC, and the molecular weight decreased with increasing the ionomer content.     

Modification of Interfacial Interaction of PBT/PP Blends by Adding Main-chain Liquid Crystalline Ionomer with Sulfonic Group

A main-chain liquid crystalline ionomer(MLCI)containing sulfonic group was synthesized by an interfacial condensation reaction.The MLCI was blended with polybutylene terephthalate(PBT)and polypropylene...     

Structure and properties of dynamically cured EPDM and ionomer blends

The structure and properties of dynamically cured ethylene-propylene-diene terpolymer (EPDM) and ionomer blends have been studied. The blends were prepared in a laboratory internal mixer, where EPDM was cured under shear in the presence of ionomer with dicumyl peroxide (DCP) under different shear conditions. The effects of EPDM/ionomer compositions, DCP concentration and the intensity of shear mixing were investigated using capillary rheometer, differential scanning calorimeter (DSC) and scanning electron microscopy (SEM) techniques. Two kinds of poly(ethylene-co-methacrylic acid) ionomers containing different metal ions(Na⁺ and Zn⁺⁺) were compared and the effect of the metal ion type for neutralization was considered. The Zn-neutralized ionomer showed better miscibility with EPDM than the Na-neutralized ionomer. It is concluded from the rheological properties, crystallization behavior and morphology that the dynamically cured EPDM and Zn-ion ionomer blends show the behavior of a thermoplastic interpenetrating polymer network (IPN).     

Near infrared analysis of blends of sulfonated polystyrene ionomers and poly(ε‐caprolactam)

Near infrared spectroscopy (NIR) was used to characterize the nature of specific interactions in blends of lightly sulfonated polystyrene ionomers (M‐SPS where M = Zn⁺², Mn⁺², or Li⁺) and polycaprolactam (PA6). The assignments of the NIR overtone bands that arise due to the interactions between the cation of the ionomer, and the amide groups were made using spectra of model compounds. The relative populations of the different environments of the N? H groups were qualitatively determined by deconvoluting the NIR spectra into five absorbances representing hydrogen‐bonded N? H in crystalline and amorphous phases and an ion‐amide complex. The ion‐amide complex was specific for the blends. The interpolymer interactions were sensitive to composition and temperature, but qualitatively the behavior was the same for all three ionomer salts investigated. © 2008 Wiley Periodicals, Inc. JPolym Sci Part B: Polym Phys 46: 1602–1610, 2008     

Miscibility of blends of poly(2,6-dimethyl 1,4-phenylene oxide) with polystyrene-based ionomers and copolymers

Blends of poly(2,6-dimethyl 1,4-phenylene oxide) (PPhO) with the copolymer poly(styrene-co-methacrylic acid) (PS-MAA) and the ionomer poly(styrene-co-sodium methacrylate) (PS-MAA-Na), up to 10 mol% co-unit content, were investigated by dynamic mechanical thermal measurements. The PPhO/PS-MAA-Na blends are compared with PS/PS-MAA-Na blends. The blends of PPhO with PS-MAA are no longer miscible at 10 mol% acid content; this is attributed to a copolymer effect induced by the reduction of PS-PPhO interactions due to the presence of the MAA group which does not interact favorably with PPhO. The blends of PPhO with the ionomer are already immiscible at the lowest ion content studied (2.4 mol%), but become increasingly so as ion content is increased. Despite favorable PS-PPhO interactions, these blends are only a little more miscible than the PS/PS-MAA-Na blends. This is attributed to a combination of the increasing importance of the ionomer cluster phase (from which the homopolymer chains presumably are excluded) as ion content is increased, and of a copolymer effect between the homopolymers and the unclustered phase of the ionomer. These results are compared with published data indicating that blends of PPhO with another biphasic ionomer, zinc sulfonated polystyrene, are miscible. The contrasting behavior is rationalized in part by the suggestion that the copolymer effect between PPhO and the unclustered phase of the latter ionomer, but not of the former, is absent; this is related to multiplet structure and sizes. The analysis made of the above systems is extended to predict what might be the miscibility behavior between PPhO and other PS-based ionomer and related copolymer systems. © 1993 John Wiley & Sons, Inc.     

Compatibilization of PBT/PP Blends by Adding Side-chain Liquid Crystalline Ionomer with Quaternary Pyridinium Groups

A side-chain liquid crystalline ionomer(SLCI) was synthesized by grafting copolymerization of 4-(4-ethoxybenzoyloxy)-4′-allyloxybiphenyl and N-allyl-pyridium bromide on polymethylhydrosiloxane. The SLCI was blended with polypropylene(PP) and polybutylene terephthalate(PBT) by melt mixing. The thermal behavior, liquid crystalline properties, morphological structure, and mechanical properties of the blends were investigated by differential scanning calorimetry(DSC), polarizing optical microscopy(POM), scannin...