立式加工中心关键几何误差判定与量化验证

针对现阶段机床空间误差模型不完整且传统灵敏度分析存在局限性,导致其关键几何误差溯源不准确,以及关键几何误差判定结果难以量化验证的问题,以某立式加工中心为研究对象,提出一种机床关键几何误差判定与量化验证方法。以旋量理论为基础,研究某立式加工中心空间误差建模,以输出机床完整空间误差模型;在此基础上,以基于传统局部灵敏度分析为基础,利用误差贡献度因子判定机床关键几何误差;借助数值模拟实验对判定结果进行量化验证。结果表明：相较于传统灵敏度分析结果,利用误差贡献度因子判定关键几何误差的结果更准确;基于误差贡献度因子的判定结果,不仅能量化几何误差相对机床空间误差的影响程度,同时可为机床部件制造精度设计提供理论参考。     

基于Sobol’法的机床关键几何误差元素辨识方法研究

针对机床几何误差元素多、误差测量与辨识过程繁琐等问题,利用Sobol’全局灵敏度分析方法对空间误差模型中的几何误差元素进行灵敏度分析,筛选出影响较大的几何误差元素,从而降低误差测量与辨识过程的复杂度,简化空间误差模型。以螺旋理论为建模基础,建立机床空间误差模型;对所有几何误差元素进行Sobol序列抽样并通过蒙特卡洛估计法求解灵敏度,计算各误差元素的一阶灵敏度值及全局灵敏度值,从21个误差项中筛选出对机床空间误差影响较大的12项;将简化模型与完备模型进行对比,空间误差元素简化率为48%,其预测精度大于80%,说明了误差元素筛选的有效性,为机床空间误差建模、误差元素辨识以及空间误差补偿工作的简化提供参考。     

立式加工中心空间误差验证及补偿

为提高某立式加工中心整机加工精度,借助旋量理论建立完备立式加工中心空间误差模型,在此基础上实现机床空间误差有效补偿.以旋量理论为基础推导并建立机床刀具运动链与工件运动链运动学正解,分析机床21项几何误差原理,在考虑21项几何误差的基础上建立该立式加工中心完备空间误差模型;利用九线法完成各项几何误差辨识;基于旋量运动学正解求解机床运动学逆解后得出运动轴实际运动路径,并通过体对角线实验对比补偿前后的效果.结果表明:所提补偿方法补偿效果显著,验证了机床空间误差模型的准确性,实现了提高机床加工精度的目的.     

五轴联动立式磨床几何误差灵敏度研究

以一台五轴联动立式磨床为例,提出了一种分析几何误差灵敏度的方法。基于多体系统理论和齐次坐标变换建立了五轴联动立式磨床的33项几何误差模型,利用求导的方式给出了几何误差灵敏度分析的数学模型。并根据该模型找出了关键几何误差,研究了关键几何误差的灵敏度系数随平移轴运动的变化规律,研究结果为精密机床改进设计和误差的实时补偿提供了理论依据。     

基于激光跟踪仪的数控机床空间误差测量及补偿

为了改变机床空间误差综合性的测量手段和补偿技术在国内机床制造和生产中应用较少的现状和研究数控机床空间精度提升方法，介绍数控机床平动轴的21项误差和激光跟踪仪的空间误差测试原理，阐述测量与辨识机床空间误差的步骤和方法。在桥式五轴加工中心上进行空间误差测试，给出数控机床空间误差结果，并生成误差补偿文件，通过西门子的VCS功能进行了误差补偿。并对比分析了补偿前后的21项误差，对补偿前后数据的差异进行原因分析，并通过对机床空间体对角线的测量验证了空间误差测量与补偿的实际效果，补偿后误差缩小为原来的11.2%,应用该技术能够大大提高机床的空间精度。     

车铣复合数控机床空间误差建模和补偿

空间误差是影响车铣复合数控机床零件加工精度的最重要因素，现有方法对机床各轴的定位精度提升效果不好，为此设计车铣复合数控机床空间误差建模和补偿方法。忽略机床两个旋转轴的位置无关误差，通过齐次坐标变换理论构建其几何误差辨识模型，对几何误差辨识模型进行简化，实现两轴的几何误差辨识。在工件坐标系下，根据旋转轴几何误差辨识结果，采用多体理论构建机床空间误差模型。基于此误差模型，利用理想状态的逆运动学设计同步空间误差补偿策略，通过迭代方式对各轴补偿值进行计算，实现空间误差补偿。测试结果表明：设计方法补偿后，实验机床X轴、Y轴、Z轴的定位精度提升了0.6μm,B轴、C轴的定位精度提升了4″、3″,各轴的重复定位精度有很大提升，机床的反行程实验圆度也有所提升。     

精密卧式加工中心空间误差的建模、测量与补偿技术

采用空间误差补偿技术,可有效提高数控机床的空间定位精度。以一台精密卧式加工中心为对象,系统阐述其几何误差补偿中的关键问题及解决方案。通过三维误差建模与分析,得到该机床的21项几何误差中有17项需要测量和补偿,另外4项误差对机床定位精度的影响甚微。以此为依据,设计误差测量及补偿方案,并给出误差的具体测量方法和补偿结果。结果表明:经过一次系统地误差测量与补偿,精密卧式加工中心的空间定位精度可以提高50%～70%;合理规划和实施空间误差测量,可大幅提高测量效率。     

TX1600G镗铣加工中心镗削系统空间误差建模研究

随着机床精度要求的不断提高,零部件几何误差间的耦合作用所形成的空间误差已成为影响床身自身精度及加工工件精度不可忽略的误差因素之一。以TX1600G镗铣加工中心镗削系统为研究对象,结合该系统的运动原理及多体系统理论建立拓扑结构及低序体间阵列,并据此获得镗削系统空间误差模型;在模型构建过程中首次将垂直度因素引入相邻体运动关系矩阵中,提高了空间误差表征的准确度,使得工件和刀具之间理论误差关系式更加贴近实际并验证了误差矩阵中误差项,该方法同样适用其它类型机床误差分析。     

基于线性响应面法的机床几何误差灵敏度识别

机床各零部件几何误差是影响机床精度的主要因素,识别各项几何误差对机床精度的灵敏度可以为机床精度分析提供理论依据与参考。基于多体系统和线性响应面法,提出了一种对机床精度解析模型的灵敏度识别方法。以一台5轴卧式数控铣床为例,对提出的模型和算法进行了应用,首先建立机床的几何精度模型,利用插值抽样技术提取模型样本点,从而构造机床的几何精度线性响应面模型,通过计算与分析该模型的敏感度系数,从而识别出机床的关键性几何误差。计算示例表明,该方法可以有效计算出机床各项几何误差的敏感度系数,对于机床几何误差参数较多且各项误差耦合关系复杂时有一定的适用性。     

三轴数控机床静态精度设计研究进展

国内三轴数控机床存在精度低和可靠性差的问题,而机床精度和可靠性可通过合理的静态精度设计方法得以保证.机床静态精度设计方法包括加工精度稳健设计方法和静态几何精度设计方法,针对两种精度设计方法的衔接合理性和工程应用实用性低的问题,在深入调研机床静态精度设计研究成果的基础上,从机床空间误差建模、平动轴几何误差元素辨识、关键几何误差元素溯源和加工精度稳健设计以及静态几何精度设计这5个关键问题着手,分别给出具体的解决方法,并形成一套完整的三轴数控机床静态精度设计系统实施方案,为完善机床几何精度设计和静态几何精度设计提供了参考.     

基于多体系统理论的车铣中心空间误差模型分析

数控机床的误差建模是进行机床运动设计、精度分析和误差补偿的关键技术,也是保证机床加工精度的重要环节.本文利用多体系统理论来构建超精密数控机床的几何误差模型,该模型简便、明确,不受机床结构和运动复杂程度的限制,为计算机床误差、实现误差补偿和修正控制指令提供了理论依据.在机床实际应用中,可以利用由精密机床误差建模所推导出的几何位置误差来修正理想加工指令,控制机床的实际运动,从而实现几何误差补偿,提高机床加工精度.     

Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics

Volumetric positional accuracy constitutes a large portion of the total machine tool error during machining. In order to improve machine tool accuracy cost-effectively, machine tool geometric errors as well as thermally induced errors have to be characterized and predicted for error compensation. This paper presents the development of kinematic error models accounting for geometric and thermal errors in the Vertical Machining Center (VMC). The machine tool investigated is a Cincinnati Milacron Sabre 750 3 axes CNC Vertical Machining Center with open architecture controller. Using Rigid Body Kinematics and small angle approximation of the errors, each slide of the three axes vertical machining center is modeled using homogeneous coordinate transformation. By synthesizing the machine's parametric errors such as linear positioning errors, roll, pitch and yaw etc., an expression for the volumetric errors in the multi-axis machine tool is developed. The developed mathematical model is used to calculate and predict the resultant error vector at the tool–workpiece interface for error compensation.     

Development of a multi-step measuring method for motion accuracy of NC machine tools based on cross grid encoder

Machining accuracy is directly influenced by the quasi-static errors of a machine tool. Since machine errors have a direct effect on both the surface finish and geometric shape of the finished work piece, it is imperative to measure the machine errors and to compensate for them. A revised geometric synthetic error modeling, measurement and identification method of 3-axis machine tool by using a cross grid encoder is proposed in this paper. Firstly a revised synthetic error model of 21 geometric error components of the 3-axis NC machine tools is developed. Also the mapping relationship between the error component and radial motion error of round work piece manufactured on the NC machine tools are deduced. Aiming to overcome the solution singularity shortcoming of traditional error component identification method, a new multi-step identification method of error component by using the cross grid encoder measurement technology is proposed based on the kinematic error model of NC machine tool. Finally the experimental validation of the above modeling and identification method is carried out in the 3-axis CNC vertical machining center Cincinnati 750 Arrow. The entire 21 error components have been successfully measured by the above method. The whole measuring time of 21 error components is cut down to 1–2 h because of easy installation, adjustment, operation and the characteristics of non-contact measurement. It usually takes days of machine down time and needs an experienced operator when using other measuring methods. Result shows that the modeling and the multi-step identification methods are very suitable for ‘on machine’ measurement.     

提高轮廓加工误差联机检测精度的研究

在数控机床或加工中心上采用联机检测轮廓加工误差的方法，不用价格昂贵的坐标测量机，具有简单、省时、经济的特点。文章分析了数控机床或加工中心的直线运动误差对联机检测轮廓加工误差精度的影响，并测量出了加工中心的几何运动误差，提出了消除机床几何运动误差影响，提高轮廓加工误差联机检测精度的方法。实验结果表明，所采用的方法可以明显提高轮廓加工误差联机检测精度。     

Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement

The geometric errors of rotary axes are the fundamental errors of a five-axis machine tool. They directly affect the machining accuracy, and require periodical measurement, identification and compensation. In this paper, a precise calibration and compensation method for the geometric errors of rotary axes on a five-axis machine tool is proposed. The automated measurement is realized by using an on-the-machine touch-trigger technology and an artifact. A calibration algorithm is proposed to calibrate geometric errors of rotary axes based on the relative displacement of the measured reference point. The geometric errors are individually separated and the coupling effect of the geometric errors of two rotary axes can be avoided. The geometry error of the artifact as well as its setup error has little influence on geometric error calibration results. Then a geometric error compensation algorithm is developed by modifying the numeric control (NC) source file. All the geometric errors of the rotary errors are compensated to improve the machining accuracy. The algorithm can be conveniently integrated into the post process. At last, an experiment on a five-axis machine tool with table A-axis and head B-axis structure validates the feasibility of the proposed method.