共查询到20条相似文献,搜索用时 843 毫秒
1.
针对传统设备配置软件在通用性和可扩展性方面的不足,提出了基于设备描述的设备配置模型。该模型的设备配置器独立于配置软件,利用XML分别描述了设备配置信息和配置数据信息,利用XAML描述了配置界面信息。相比传统的代码编写模式,纯文本的配置器降低了软件开发难度。同时,该模型利用抽象层实现设备配置器实例与设备配置软件解耦,达到设备支持包与设备配置软件同步开发的目的。该模型应用到设备配置软件开发中,结果表明:对提高软件组件的重用性、缩短开发周期有显著作用。 相似文献
2.
3.
简述了合成气制乙二醇的工艺流程,对比了流程中酯化反应塔并流塔外加氧和并流塔内加氧的两种流程配置,针对紧急处置时采用氮气置换反应气存在的NO损失增加、影响运行稳定性等问题,提出了取消氮气吹扫设置,在酯化反应塔内置换热管组、通过冷却介质对塔内温度进行调节的方案,介绍了该方案的具体流程配置,对比了紧急置换氮气配置与内置换热管组配置的投资、运行、设备配置等。结果表明,内置换热管组配置方案投资省、无NO损失,可实现乙二醇装置的平稳运行。 相似文献
4.
介绍了某炼油厂销售系统的架构、软硬件组成、功能分配和工作原理。从架构配置、服务器配置、通信配置和实际使用情况4个方面对系统稳定性进行了深入分析和相应的升级改造。改造后,销售系统运行平稳。 相似文献
5.
6.
可重用配置设计是在传统配置设计方法的基础上,为进一步加强重用设计信息、提高配置设计效率与质量的一种设计方法。本文主要对于布袋除尘器模块化问题进行分析,探讨了可重用布袋除尘器配置模块化应用。 相似文献
7.
8.
9.
10.
对于轮胎工厂中的炼胶、挤出、硫化等工序的设备配置方案的节能对比进行了分析,介绍了目前比较节能的设备配置方式。 相似文献
11.
12.
磷铵装置采用集散控制系统是近十年的事,DHS98集散控制系统硬件配置灵活,软件组态简单,能及时调整控制指标,节能降耗,稳定操作,提高生产能力。介绍系统的构成,I/O配置,软件功能及编制,系统监控界面,运行情况及调试中的注意事项。 相似文献
13.
用端部四电极布置方法和中间四电极布置方法对单向和正交CFRP材料在循环加载情况下的应变敏感性系数(GF)值进行了测试;结果表明:单向CFRP的GF随着电极布置方式的不同而反向,采用端部四电极布置方法其测试值为3.06、中间四电极布置方法为-4.76;研究了机理;为保证测得的电阻应变系数尽可能真实,应采用端部四电极布置方法。 相似文献
14.
简述了本体法PVC的生产工艺流程,DCS控制系统的硬件配置、软件配置和聚合过程中控制系统完成的主要功能。 相似文献
15.
Yalun Dong Lihong Yang Ziqi Jin Linzhi Wu 《International Journal of Applied Ceramic Technology》2022,19(6):3420-3435
The ballistic responses of the composite targets composed of the corrugated ceramic block and corrugated steel plate were investigated by numerical simulation. The effects of the composite target configuration on the projectile residual velocity, the failure mode, and the energy absorption of targets were analyzed. The ballistic performance of the composite target with composites back plate was discussed. The results show that the projectile impacting on the slope of the target has the least residual velocity of projectiles, and the slope of the target can remarkably change the trajectory of the projectile. Adding the corrugated UHMWPE composites plate along the direction of the steel back plate of the configuration can effectively improve the overall anti-penetration performance of the configuration. 相似文献
16.
较为全面地介绍了淀粉化学变性、物理处理、接枝共聚和生物酶异构化处理技术在淀粉基生物降解塑料中的应用.为变性淀粉生产、研究单位在生物降解塑料领域变性淀粉的研发拓宽了思路. 相似文献
17.
对样品A测定总氰化物浓度,分析氯胺T配制时间、操作不当和操作速度对测定结果的影响。实验结果表明,除氯胺T配制时间(一周内)对测定结果影响甚微,其它情况下测定结果均偏差较大。 相似文献
18.
Núria Vidal Manel Poch Eugnia Martí Ignasi Rodríguez‐Roda 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2002,77(11):1206-1211
The environmental implications of including structural changes in a wastewater treatment plant to decrease effluent concentrations of nitrogen were evaluated in this study. Environmental effects from these structural changes were assessed by using the Life Cycle Assessment theoretical framework. The wastewater treatment plant selected as a reference scenario had an activated sludge configuration. The Ludzack–Ettinger and Oxidation Ditch configurations were selected as modifications of the reference scenario. Results from this study show that the inclusion of nitrogen removal mechanisms in the configuration of the plant reduces the effect of the plant on the eutrophication, but simultaneously increases the effect on the consumption of abiotic resources, global warming, acidification and human toxicity. These general trends, however, vary depending on the configuration selected to remove nitrogen. Taking all the impacts together, the Oxidation Ditch configuration would cause less environmental impact than the Ludzack–Ettinger configuration, given the characteristics of the selected scenarios. © 2002 Society of Chemical Industry 相似文献
19.
徐进 《硫磷设计与粉体工程》2004,(5):29-32
MTLS000控制系统具有分散控制、集中管理、控制精度高、瞬态响应快、防爆等特点,在某公司脂肪醇工程中被采用。详细阐述了该控制系统在此工程中的系统配置、网络配置、供电保障配置、系统安装要求等。经过安装调试后,系统运行状况良好,基本达到设计预期要求。 相似文献