Electronic structure and thermodynamic properties of LiBC under high pressure

This paper investigates the electronic structure and thermodynamic properties of LiBC in the hexagonal structure by using the generalized gradient approximation （GGA） and local density approximation correction scheme in the frame of density functional theory. The geometric structure of LiBC under zero pressure, and the dependences of the normalized lattice parameters a/ao and c/co, the ratio e/a, the normalized primitive volume V/Vo on pressure are given. The thermodynamic quantity （including the heat capacity Cv, Debye temperature 6~D, thermal expansion a and Grfineisen parameter -y） dependences on temperature and pressure are obtained through the GGA method and the quasi-harmonic Debye model. The band structures and density of state of LiBC under different pressures have also been analysed.     

Structural and thermodynamic properties of Os from first-principles calculations

We investigate the structural, thermodynamic and electronic properties of Os by plane-wave pseudopotential density functional theory method. The obtained lattice constants, bulk modulus and cell volumes per formula unit are well consistent with the available experimental data. Especially, from our calculated bulk modulus, we conclude that Os is more compressible than diamond. Moreover, the temperature induced phase transition of Os from HCP structure to FCC structure has been obtained. It is found that the transition temperature of Os at zero pressure is 2702 K. However no transition pressure is found in our calculations. The effect of bulk modulus B as well as other thermodynamic properties of Os (including the thermal expansion α and the Grüneisen constant γ) on temperatures have also been studied. Our calculated thermal expansion α=1.510×10⁻⁵ K⁻¹ and the Grüneisen constant γ=2.227 for HCP structure at room temperature agree very well with the experimental data. The density of states for HCP structure at 0 K and FCC structure at transition temperature 2702 K are also investigated in our work.     

The structural, elastic and thermodynamic properties of thorium tetraboride

The structural, elastic and thermodynamic properties of thorium tetraboride (ThB₄) have been investigated by using first-principles plane-wave pseudopotential density functional theory with generalized gradient approximation. The behaviors of structural parameters under 0-70 GPa hydrostatic pressure are studied by means of Broyden, Fletcher, Goldfarb, and Shanno (BFGS) geometry optimization scheme. By using the stress-strain method, single crystal elastic constants are calculated to test the mechanical stability of the crystal structure and to determine mechanical properties such as bulk modulus at each pressure. However, in order to study the thermodynamic properties of ThB₄, the quasi-harmonic Debye model is used. Then, the dependencies of bulk modulus, heat capacities, thermal expansions, Grüneisen parameters and Debye temperatures on the temperature and pressure are obtained in the whole pressure range 0-70 GPa and temperature range 0-1500 K.     

Structural,elastic, thermodynamic and electronic properties of LuX (X = N,Bi and Sb) compounds: first principles calculations

ABSTRACT

The structural, electronic, elastic and thermodynamic properties of LuX (X = N, Bi and Sb) based on rare earth into phases, Rocksalt (B1) and CsCl (B2) have been investigated using full-potential linearized muffin-tin orbital method (FP-LMTO) within density functional theory. Local density approximation (LDA) for exchange-correlation potential and local spin density approximation (LSDA) are employed. The structural parameters as lattice parameters a₀, bulk modulus B, its pressure derivate B’ and cut-off energy (E_c) within LDA and LSDA are presented. The elastic constants were derived from the stress–strain relation at 0 K. The thermodynamic properties for LuX using the quasi-harmonic Debye model are studied. The temperature and pressure variation of volume, bulk modulus, thermal expansion coefficient, heat capacities, Debye temperature and Gibbs free energy at different pressures (0–50 GPa) and temperatures (0–1600 K) are predicted. The calculated results are in accordance with other data.     

The under-pressure behaviour of mechanical,electronic and optical properties of calcium titanate and its ground state thermoelectric response

Abstract

In this study, the elastic, electronic, optical and thermoelectric properties of CaTiO₃ perovskite oxide have been investigated using first-principles calculations. The generalised gradient approximation (GGA) has been employed for evaluating structural and elastic properties, while the modified Becke Johnson functional is used for studying the optical response of this compound. In addition to ground state physical properties, we also investigate the effects of pressure (0, 30, 60, 90 and 120 GPa) on the electronic structure of CaTiO₃. The application of pressure from 0 to 90 GPa shows that the indirect band gap (Γ-M) of CaTiO₃ increases with increasing pressure and at 120 GPa it spontaneously decreases transforming cubic CaTiO₃ to a direct (Γ-Γ) band gap material. The complex dielectric function and some optical parameters are also investigated under the application of pressures. All the calculated optical properties have been found to exhibit a shift to the higher energies with the increase of applied pressure suggesting potential optoelectronic device applications of CaTiO₃. The thermoelectric properties of CaTiO₃ have been computed at 0 GPa in terms of electrical conductivity, thermal conductivity and Seebeck coefficient.     

A first-principles study on the structural and elastic properties and the equation of state of wurtzite-type cadmium selenide under pressure

A first-principles investigation on the crystal structural and elastic properties and the equation of state of wurtzite-type cadmium selenide (w-CdSe) has been conducted using the plane-wave pseudo-potential density functional theory and the quasi-harmonic Debye model. The elastic constants, the aggregate elastic moduli, the elastic anisotropy, and Poisson's ratio under pressure have been investigated. Our calculated equilibrium lattice constants, the elastic constants, and the aggregate elastic moduli at zero pressure are in good agreement with the experimental data and other theoretical results. The variations in the compressional and shear elastic wave velocities with pressure at zero temperature up to pressure 2.7 GPa have been studied; the computed Debye temperature at zero pressure and zero temperature is in reasonable agreement with the result of Bonello et al., In addition, the equation of state of w-CdSe in the pressure range of 0–2.7 GPa and up to a temperature of 900 K has also been obtained.     

Temperature and pressure behaviour of narrow-gap semiconductors including galena

The structural high pressure and temperature investigation of narrow-gap semiconductors (lead chalcogenides) has been performed in the present article. A realistic approach for room temperature and high temperature study of narrow-gap semiconductors has been used. It is examined that the present compounds are more stable in NaCl-phase and they transform to CsCl-phase at high pressure. In the present article, the phase transition pressures and volume collapses of lead chalcogenides have been investigated at room and high temperatures. Phase transition pressures have been reported at high temperature range from 0 to 1200 K. Elastic and anharmonic constants have also been reported at room temperature. A structural study of the narrow-gap semiconductors have been carried out using the realistic model including temperature effect. The temperature and pressure behaviour of elastic constants for the present compounds have also been discussed. Furthermore, various mechanical and thermo dynamical properties like modulus of elasticity, Debye temperatures etc. are also presented.     

First-principles calculations for transition phase and thermodynamic properties of GaAs

The transition phase of GaAs from the zincblende (ZB) structure to the rocksalt (RS) structure is investigated by ab initio plane-wave pseudopotential density functional theory method, and the thermodynamic properties of the ZB and RS structures are obtained through the quasi-harmonic Debye model. It is found that the transition from the ZB structure to the RS structure occurs at the pressure of about 16.3\,GPa, this fact is well consistent with the experimental data and other theoretical results. The dependences of the relative volume V/V₀ on the pressure P, the Debye temperature \Th and specific heat C_V on the pressure P, as well as the specific heat C_V on the temperature T are also obtained successfully.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

A first-principle study of the structural, elastic, lattice dynamical and thermodynamic properties of PrX (X=P, As)

The structural, phase transition, elastic, lattice dynamic and thermodynamic properties of rare-earth compounds PrP and PrAs with NaCl (B1), CsCl (B2), ZB (B3), WC (B_h) and CuAu (L1₀) structures are investigated using the first principles calculations within the generalized gradient approximation (GGA). For the total-energy calculation, we have used the projected augmented plane-wave (PAW) implementation of the Vienna Ab-initio Simulation Package (VASP). Specifically, some basic physical parameters, e.g. lattice constants, bulk modulus, elastic constants, shear modulus, Young's modulus and Poison's ratio, are predicted. The obtained equilibrium structure parameters are in excellent agreement with the experimental and theoretical data. The temperature and pressure variations of the volume, bulk modulus, thermal expansion coefficient, heat capacity and Debye temperature are calculated in wide pressure and temperature ranges. The phonon dispersion curves and corresponding one-phonon density of states (DOS) for both compounds are also computed in the NaCl (B1) structure.     

Structural and thermodynamic properties of WB at high pressure and high temperature

The structure parameters and electronic structures of tungsten boride (WB) have been investigated by using the density functional theory (DFT). Our calculating results display the bulk modulus of WB are 352±2 GPa (K′₀=4.29) and 322±3 GPa (K′₀=4.21) by LDA and GGA methods, respectively. We have analyzed the probable reason of the discrepancy from the bulk modulus between theoretical and experimental results. The compression behavior of the unit cell axes is anisotropic, with the c-axis being more compressible than the a-axis. By analyzing the bond lengths information, it also demonstrated that WB has a lower compressibility at high pressure. From the partial densities of states (PDOS) of WB, we found that the Fermi lever is mostly contributed by the d states of W atom and p states of B atom and that the contributions from the s, p states of W atom and s states of B atom are small. Moreover, using the Gibbs 2 program, the thermodynamic properties of WB are obtained in a wide temperature range at high pressure for the first time in this work.     

Elastic and thermodynamic properties of CaB6 under pressure from first principles

The elastic and thermodynamic properties of CsCl-type structure CaB₆ under high pressure are investigated by first-principles calculations based on plane-wave pseudopotential density functional theory method within the generalized gradient approximation (GGA). The calculated lattice parameters of CaB₆ under zero pressure and zero temperature are in good agreement with the existing experimental data and other theoretical data. The pressure dependences of the elastic constants, bulk modulus B (GPa), and its pressure derivative B′, shear modulus G, Young's modulus E, elastic Debye temperature Θ_B, Zener's anisotropy parameter A, Poisson ratios σ, and Kleinmann parameter ζ are also presented. An analysis for the calculated elastic constants has been made to reveal the mechanical stability of CaB₆ up to 100 GPa. The thermodynamic properties of the CsCl-type structure CaB₆ are predicted using the quasi-harmonic Debye model. The pressure-volume-temperature (P-V-T) relationship, the variations of the heat capacity C_V, Debye temperature Θ_D, and the thermal expansion α with pressure P and temperature T, as well as the Grüneisen parameters γ are obtained systematically in the ranges of 0-100 GPa and 0-2000 K.     

First-principles calculations for elastic and electronic properties of ZnSnO3 under pressure

The LiNbO₃ (LN)-type structure and the ilmenite (IL)-type structure of ZnSnO₃ are investigated with the ultrasoft pseudopotential scheme in the frame of the local density approximation (LDA). The calculated lattice parameters of ZnSnO₃ under zero pressure and zero temperature are in very good agreement with the existing experimental data. The pressure dependences of the elastic constants, Debye temperatures, Poisson's ratio, sound velocity, mechanical stability and mechanical anisotropy of the LN-type structure of ZnSnO₃ have also been investigated. We find that the LN-type structure of ZnSnO₃ is a mechanically stable phase under pressures up to 21 GPa; however, the mechanical anisotropy weakens with the increasing pressures. In addition, the calculated band structure indicates that LN-ZnSnO₃ has a direct band gap of 1.669 eV, and the total and partial densities of states, under diverse pressures of the LN-type structure ZnSnO₃ have also been obtained.     

Effect of oxygen pressure on structure and properties of Bi1.5Zn1.0Nb1.5O7 pyrochlore thin films prepared by pulsed laser deposition

The Bi₂O₃-ZnO-Nb₂O₅ (BZN) cubic pyrochlore thin films were prepared on Pt/TiO₂/SiO₂/Si(1 0 0) substrates by using pulsed laser deposition process. The oxygen pressure was varied in the range of 5-50 Pa to investigate its effect on the structure and dielectric properties of BZN thin films. It is found that oxygen pressure during deposition plays an important role on structure and other properties of BZN films. The BZN films deposited at temperature of 650 °C and at O₂ pressure of 5 Pa have an amorphous BZN and Nb₂O₅ phases but exhibits a cubic pyrochlore structure with a preferential (2 2 2) orientation when the oxygen pressure increases to 10 Pa. Dielectric constant and loss tangent of the films deposited at 10 Pa are 185 and 0.0008 at 10 kHz, respectively. The dielectric tunability is about 10% at a dc bias field of 0.9 MV/cm.     

(CdSe)n(n=1,2)团簇性质及CdSe分子热力学性质的理论计算

用密度泛函B3LYP方法、有效核势(ECP)基组LanL2DZ对(CaSe)n(n=1,2)团簇进行了理论研究,得到(CaSe)n(n=1,2)分子体系可能存在的状态及各电子状态的平衡几何Re、谐振频率、偶极矩和离解能De、不同温度、压力下的热力学函数值;设用总能量中的电子和振动能量近似代表CdSe分子处于固态时的能量,用总熵中的电子和振动熵近似代表CdSe分子处于固态时的熵,进而计算了Cd与Se反应的△Hθ、△Sθ、△G,并由此计算出不同温度的反应平衡常数Kp结果表明:在298～1400K温度范围内,Cd与Se反应的自由能值均为负,且随着温度的升高,△Gθ值负的越多,表明在这个温度范围内反应能自发发生,而且自发趋势随温度的升高逐渐增大;平衡常数逐渐减小,即反应进行程度随温度的升高逐渐减小;CdSe分子材料的导电性随压力增大而增强.     

Direct current magnetron sputter-deposited ZnO thin films

Zinc oxide (ZnO) is a very promising electronic material for emerging transparent large-area electronic applications including thin-film sensors, transistors and solar cells. We fabricated ZnO thin films by employing direct current (DC) magnetron sputtering deposition technique. ZnO films with different thicknesses ranging from 150 nm to 750 nm were deposited on glass substrates. The deposition pressure and the substrate temperature were varied from 12 mTorr to 25 mTorr, and from room temperature to 450 °C, respectively. The influence of the film thickness, deposition pressure and the substrate temperature on structural and optical properties of the ZnO films was investigated using atomic force microscopy (AFM) and ultraviolet-visible (UV-Vis) spectrometer. The experimental results reveal that the film thickness, deposition pressure and the substrate temperature play significant role in the structural formation and the optical properties of the deposited ZnO thin films.     

Electronic and thermodynamic properties of B2-FeSi from first principles

The electronic and thermodynamic properties of B2-FeSi have been investigated using the first-principles method based on the plane-wave basis set. The calculated equilibrium lattice constant is in good agreement with available experimental and theoretical data. Our results have shown that B2-FeSi was a narrow gap semiconductor of above 0.055 eV and exhibited metallic characteristics. The density of states (DOS) can also describe orbital mixing. Using the quasi-harmonic Debye model, the thermodynamic properties of B2-FeSi have been analyzed. Variations of the Debye temperature Θ_D, thermal expansion α, heat capacity C_v, entropy S and the Grüneisen parameter γ on temperature T and pressure P were obtained successfully in the ranges of 0-2400 K and 0-140 GPa.     

First-principles study on superconductive properties of compressive strain-engineered cryogenic superconducting heavy metal lead(Pb)

As one of the main materials in the practical application.of superconductor,lead(Pb)has been used to manufacture superconducting AC power cable,and some weak current fields.With the development of manufacturing,technology,more and more researchers focus on exploring the physical and chemical properties of cryogenic superconducting materials,instead of blindly pursuing the improvement of the superconducting transition temperature(T_c).In this paper,the structural properties and superconducting transition temperature under high pressure of Pb have been studied by first-principles calculations.It has shown that Pb can withstand the compressive strain up to 10%while the lattice structure remains stable,indicated by the calculations of phonon band structures.From 0%to 10%compressive strain,there is neither a band-gap nor changing of the band structure.The.changing of electronic DOS.at the Fermi level leads to a decreasing of T_c.Our calculations show that Pb is a stable elemental metallic superconductor even under high pressure,which explains the reason why it has been used in practical productions.     

Role of growth temperature and oxygen partial pressure on the structural and electrical properties of pulsed laser deposited La1−xSrxnO3−δ thin films

The paper presents the fabrication and characterization of La_0.65Sr_0.35MnO_3−δ (LSMO) polycrystalline thin films deposited directly on Si (1 0 0) substrates using pulsed laser deposition technique. Various deposition parameters like substrate temperature and oxygen partial pressure have been varied systematically to obtain stoichiometric, crack-free films with smooth surface morphology having nearly monodisperse grain size distribution. The substrate temperature variation from 600 to 800 °C had profound effects on the microstructure and topography of the deposited film, with optimum result being obtained at 700 °C. The variation of partial pressure of oxygen controls the deposition kinetics as well as the stoichiometry of the film in terms of oxygen vacancy, which influences the magnetic and electrical transport properties of the manganate films. The microstructure and crystallinity of the deposited films have been studied using X-ray diffraction, scanning electron microscopy and atomic force microscopy. A correlation between the oxygen stoichiometry and micro-structural and transport properties of the deposited films has been obtained.     

Structural, optical and electrochemical properties of TiO2 thin films grown by APCVD method

Atmospheric pressure chemical vapor deposition (APCVD) of TiO₂ thin films has been achieved onto glass and onto ITO-coated glass substrates, from the reaction of TiCl₄ with ethyl acetate (EtOAc). The effect of the synthesis temperature on the optical, structural and electrochemical properties was studied through spectral transmittance, X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS) measurements. It was established that the TiO₂ films deposited onto glass substrate, at temperatures greater than 400 °C grown with rutile type tetragonal structure, whereas the TiO₂ films deposited onto ITO-coated glass substrate grown with anatase type structure. EIS was applied as suitable method to determine the charge transfer resistance in the electrolyte/TiO₂ interface, typically found in dye-sensitized solar cells.