Synthesis and antimicrobial activity of the Schiff base from polyoxyalkylene‐montmorillonite nanocomposites and aldehydes

Vanillin (4‐hydroxy‐3‐methoxy benzaldehyde) and 5‐formylamino salicylic acid microbicides were reacted with polyoxyalkylene‐montmorillonite (D_230–2000‐MMT) nanocomposites. The microstructure of these Schiff base nanocomposites was characterized by TEM and XRD. D_230–2000‐MMT nanocomposites were prepared by an ion exchange process of sodium montmorillonite (Na‐MMT) and NH₃ ⁺ groups in polyoxyalkylene amine hydrochloride with three different molecular masses of D₂₃₀, D₄₀₀, and D₂₀₀₀. Wide‐angle X‐ray diffraction confirms the intercalation of the polymer between the silicate layers. Electrostatic interaction between the positively charged NH₃ ⁺ groups and the negatively charged surface of MMT was observed. The nanocomposites were tested for antimicrobial activity against the Gram‐negative bacteria (Escherichia coli NCIM 2065), Gram‐positive bacteria (Bacillus subtillus ATCC), and fungi (Candida albicans SC5314 and Cryptococcus neoformans). The D₂₀₀₀‐MMT/vanillin Schiff base nanocomposite strongly inhibited the growth of all microorganisms that can be used in different applications. The amount of loaded polymer and the structure of the nanocomposite play an important role in inhibiting the bacterial and fungal strains. It is found that the Schiff base nanocomposite affect the morphology, oxygen consumption, and the release of cytoplasmic constituents such as potassium (K⁺), sodium (Na⁺), and calcium (Ca²⁺) ions leading to death of the cells. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Effect of organic modifiers and silicate type on filler dispersion,thermal, and mechanical properties of ABS‐clay nanocomposites

Acrylonitrile–butadiene–styrene (ABS)–clay composite and intercalated nanocomposites were prepared by melt processing, using Na‐montmorillonite (MMT), several chemically different organically modified MMT (OMMT) and Na‐laponite clays. The polymer–clay hybrids were characterized by WAXD, TEM, DSC, TGA, tensile, and impact tests. Intercalated nanocomposites are formed with organoclays, a composite is obtained with unmodified MMT, and the nanocomposite based on synthetic laponite is almost exfoliated. An unintercalated nanocomposite is formed by one of the organically modified clays, with similar overall stack dispersion as compared to the intercalated nanocomposites. T_g of ABS is unaffected by incorporation of the silicate filler in its matrix upto 4 wt % loading for different aspect ratios and organic modifications. A significant improvement in the onset of thermal decomposition (40–44°C at 4 wt % organoclay) is seen. The Young's modulus shows improvement, the elongation‐at‐break shows reduction, and the tensile strength shows improvement. Notched and unnotched impact strength of the intercalated MMT nanocomposites is lower as compared to that of ABS matrix. However, laponite and overexchanged organomontmorillonite clay lead to improvement in ductility. For the MMT clays, the Young's modulus (E) correlates with the intercalation change in organoclay interlayer separation (Δd₀₀₁) as influenced by the chemistry of the modifier. Although ABS‐laponite composites are exfoliated, the intercalated OMMT‐based nanocomposites show greater improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyaniline–organoclay nanocomposites as curing agent for epoxy: Preparation and characterization

Polyaniline (PANI)–organoclay/Epoxy (EP) nanocomposites were prepared. PANI–organoclay nanocomposites were used as curing agent for EP. Organoclay was prepared by an ion exchange process between sodium cations in MMT and NH₃⁺ groups in polyoxypropylene (D₂₃₀). PANI–organoclay nanocomposite was synthesized by in situ polymerization of aniline in (14 wt%) organoclay. Infrared spectra and differential scanning calorimetry confirm the curing of EP. The absence of d₀₀₁ diffraction band of organoclay in the nanocomposites was observed by X‐ray diffraction. The structure argument was further supported by scanning electron microscopy and transmission electron microscopy. Electrical conductivity of the nanocomposites within the range 2.1 × 10⁻⁷–3.2 × 10⁻⁷ S/cm depending on the concentration of the PANI/D₂₃₀‐MMT. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Structural characterization of hydrophilic polymer blends/montmorillonite clay nanocomposites

The nanocomposite films comprising polymer blends of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), poly(ethylene oxide) (PEO), and poly(ethylene glycol) (PEG) with montmorillonite (MMT) clay as nanofiller were prepared by aqueous solution casting method. The X‐ray diffraction studies of the PVA–x wt % MMT, (PVA–PVP)–x wt % MMT, (PVA–PEO)–x wt % MMT and (PVA–PEG)–x wt % MMT nanocomposites containing MMT concentrations x = 1, 2, 3, 5 and 10 wt % of the polymer weight were carried out in the angular range (2θ) of 3.8–30°. The values of MMT basal spacing d₀₀₁, expansion of clay gallery width W_cg, d‐spacing of polymer spherulite, crystallite size L and diffraction peak intensity I were determined for these nanocomposites. The values of structural parameters reveal that the linear chain PEO and PEG in the PVA blend based nanocomposites promote the amount of MMT intercalated structures, and these structures are found relatively higher for the (PVA–PEO)–x wt % MMT nanocomposites. It is observed that the presence of bulky ester‐side group in PVP backbone restricts its intercalation, whereas the adsorption behavior of PVP on the MMT nanosheets mainly results the MMT exfoliated structures in the (PVA–PVP)–x wt % MMT nanocomposites. The crystallinities of the PEO and PEG were found low due to their blending with PVA, which further decreased anomalously with the increase of MMT concentration in the nanocomposites. The decrease of polymer crystalline phase of these materials confirmed their suitability in preparation of novel solid polymer nanocomposite electrolytes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40617.     

Liquid‐crystalline copolyester/clay nanocomposites

A series of novel polymer–clay nanocomposites, that is, liquid‐crystalline copolyester/montmorillonite (MMT) nanocomposites, were synthesized by the intercalation polycondensation of terephthalic acid, p‐acetoxy benzoic acid, and 1,2‐diacetoxy benzene in the presence of different organically modified montmorillonites (OMt's). The OMt's were prepared by the ion exchange of MMT with octadecylamine hydrochloride, p‐aminobenzoic acid hydrochloride, or lysine hydrochloride. X‐ray diffraction and transmission electron microscopy studies indicated that the inorganic cations in the MMT interlayers were already exchanged by organic onium ions and that the OMt intercalated with p‐aminobenzoic acid or lysine was good for obtaining more delaminated clay nanocomposites. The glass‐transition temperature and modulus of the nanocomposites increased compared with those of the pure polymer, whereas the isotropic temperature decreased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3155–3159, 2003     

Intercalated clay structures and amorphous behavior of solution cast and melt pressed poly(ethylene oxide)–clay nanocomposites

The polymer nanocomposite (PNC) films consisted of poly(ethylene oxide) (PEO) and sodium cations montmorillonite (MMT) clay were prepared by aqueous solution casting and direct melt press compounding techniques, whereas the films of PEO with trimethyl octadecyl ammonium cations organo‐modified montmorillonite (OMMT) clay were formed by melt pressed technique. The clay concentrations in the nanocomposites used are 1, 2, 3, 5, 10, and 20 wt % of the PEO weight. The X‐ray diffraction patterns of these nanocomposites were measured in the angular range (2θ) of 3.8–30°. The values of basal spacing d₀₀₁ of MMT/OMMT, clay gallery width W_cg, d‐spacings of PEO crystal reflections d₁₂₀ and d₁₁₂, and their corresponding crystallite size L, and the peaks intensity I (counts) were determined for these nanocomposites. Results reveal that the nanocomposites have intercalated clay structures and the amount of intercalation increases with the increase of clay concentration. As compared to melt pressed PEO–MMT nanocomposites, the amount of clay intercalation is higher in aqueous solution cast nanocomposites. At 20 wt % MMT dispersion in PEO matrix, the solution cast PEO–MMT nanocomposite almost changes into amorphous phase. The melt press compounded PEO–OMMT films show more intercalation as compared to the PEO–MMT nanocomposites prepared by same technique. In melt pressed nanocomposites, the PEO crystalline phase significantly reduces when clay concentration exceeds 3 wt %, which is evidenced by the decrease in relative intensity of PEO principal crystalline peaks. The effect of interactions between the functional group (ethylene oxide) of PEO and layered sheets of clay on both the main crystalline peaks of PEO was separately analyzed using their XRD parameters in relation to structural conformations of these nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39898.     

Nonisothermal crystallization kinetics of polyoxymethylene/montmorillonite nanocomposite

The nonisothermal crystallization kinetics of polyoxymethylene (POM), polyoxymethylene/Na–montmorillonite (POM/Na–MMT), and polyoxymethylene/organic–montmorillonite (POM/organ–MMT) nanocomposites were investigated by differential scanning calorimetry at various cooling rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the nonisothermal crystallization process of POM/Na–MMT and POM/organ–MMT nanocomposites. The difference in the values of the exponent n between POM and POM/montmorillonite nanocomposites suggests that the nonisothermal crystallization of POM/Na–MMT and POM/organ–MMT nanocomposites corresponds to a tridimensional growth with heterogeneous nucleation. The values of half‐time and the parameter Z_c, which characterizes the kinetics of nonisothermal crystallization, show that the crystallization rate of either POM/Na–MMT or POM/organ–MMT nanocomposite is faster than that of virgin POM at a given cooling rate. The activation energies were evaluated by the Kissinger method and were 387.0, 330.3, and 328.6 kJ/mol for the nonisothermal crystallization of POM, POM/Na–MMT nanocomposite, and POM/organ–MMT nanocomposite, respectively. POM/montmorillonite nanocomposite can be as easily fabricated as the original polyoxymethylene, considering that the addition of montmorillonite, either Na–montmorillonite or organ–montmorillonite, may accelerate the overall nonisothermal crystallization process. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2281–2289, 2001     

Preparation and properties of polyethylene–clay nanocomposites by an in situ graft method

The polyethylene–clay nanocomposites were prepared by the in situ graft copolymerization of styrene containing twin‐benzyldimethyldioctadecylammonium bromine modified montmorillonite (TBDO‐MMT) in polyethylene with dicumyl peroxide (DCP) as an initiator in molten state. XRD and TEM analysis indicated that intercalated polyethylene/MMT nanocomposites are obtained. The mechanics performance, crystal behavior, thermal properties, and the effect of MMT contents on PE/MMT nanocomposite were also studied. As comparison, polyethylene/montmorillonite composites prepared by a simply melt compounding without styrene were studied as well. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4921–4927, 2006     

A New Type of Dispersant [Sodium Salt of Styrene–Methacrylic Acid Copolymer (SSMA)/Montmorillonite (MMT) Nanocomposite] for Pesticide Water Dispersible Granules

A new type of dispersant [sodium salt of styrene–methacrylic acid copolymer (SSMA)/montmorillonite (MMT) nanocomposite] with different content of the MMT was synthesized through in situ solution free radical copolymerization. X‐ray diffraction measurements and electron microscopy observations prove that SSMA molecules can enter the interlayer space of MMT and form an intercalated structure. There are both fully intercalated and partly intercalated structures in the nanocomposites, which are related to the loading content of MMT. Transmission and scanning electron microscopy images indicate that the exfoliation degree of MMT in the nanocomposites decrease with increasing MMT content. Infrared spectroscopy (FTIR) analysis shows that there are hydrogen‐bonding interactions between carboxyl groups of SSMA and hydroxyl groups of MMT. Atrazine water dispersible granules were prepared by using SSMA/MMT nanocomposite as dispersant and their suspensibility in aqueous solution was determined to evaluate the dispersion properties of the nanocomposite. The results show that the addition of MMT can not only increase the steric effect of the SSMA to improve its dispersion properties, but also reduce the production cost of SSMA. The optimum loading content of MMT is 10 wt%.     

Enhancing antibacterial properties of polypropylene/Cu‐loaded montmorillonite nanocomposite filaments through sheath–core morphology

Polypropylene (PP) loaded with copper‐exchanged montmorillonite (Cu‐MMT) nanocomposite filaments and films with excellent antimicrobial activity have been reported for the first time. A sheath–core morphology filament in which only the sheath contains Cu‐MMT was prepared for maximizing bioactivity. Sodium MMT clay was modified to acid‐activated MMT and further to Cu‐MMT via an ion exchange process. The exchange operation was confirmed using wide‐angle X‐ray diffraction and energy‐dispersive X‐ray spectroscopy (EDX) which suggested increased interlayer spacing and confirmed the loading of copper in Cu‐MMT. Further, Cu‐MMT was melt‐mixed in PP in the form of PP/Cu‐MMT nanocomposite filament, film and sheath–core morphology PP/Cu‐MMT nanocomposite filament. The surface morphology and elemental composition of the nanocomposites were studied using scanning electron microscopy coupled with EDX. Transmission electron micrographs were obtained to understand the dispersion characteristics of Cu‐MMT phase in PP. X‐ray diffraction analysis of nanocomposites suggested increased crystallinity at lower loading due to heterogeneous nucleating action of MMT. The PP nanocomposite filaments and films were tested for antimicrobial activity against Gram‐negative bacterium Escherichia coli, which is the main pathogenic bacterium found abundantly in water, and were found to exhibit excellent antimicrobial activity. © 2018 Society of Chemical Industry     

Preparation and characterization of antibacterial chitosan/Ag–montmorillonite with improved dynamic mechanic properties

Chitosan/Ag–montmorillonite (CS/Ag–MMT) nanocomposite was obtained via solution intercalation. The X‐ray diffraction and transmission electron microscopy results indicated the successful formation of intercalated‐and‐exfoliated nanostructures at low Ag–MMT contents and intercalated‐and‐flocculated nanostructures at high Ag–MMT contents. The CS/Ag–MMT nanocomposite with 7 wt% Ag–MMT presented a very high inhibition ratio against Staphylococcus aureus (>70%), and its bacterial inhibition zone diameter was 3.2 mm larger than that of CS, which showed remarkable antibacterial activity. When the Ag–MMT content was 5 wt%, the E′ of CS/Ag–MMT was increased to 3,261 MPa, which was 195% higher than CS and exhibited excellent mechanic property. The DMA test results showed the T_g of CS/Ag–MMT shifted to a higher temperature, suggesting the Ag–MMT interlayer not only interacted quite strongly with the reactive groups of CS but also restricted the motion of CS macromolecules, which was also verified by Fourier transform infrared spectrum measurements. POLYM. COMPOS., 35:1980–1988, 2014. © 2014 Society of Plastics Engineers     

Synthesis and antimicrobial activity of some polymers derived from modified amino polyacrylamide by reacting it with benzoate esters and benzaldehyde derivatives

Functionalized polymers have gained much interest in the last decades. This is due to their functional groups and their polymer nature, which give them unique properties and more advantages than the corresponding small molecules. In this trend, we modified polyacrylamide by introducing an amino group in the side chain of the polymer by reacting it with ethylenediamine. The amine‐modified polymer was reacted with two classes of active compounds. The first group is aromatic aldehydes containing active groups such as p‐hydroxybenzaldehyde, vanillin, p‐chlorobenzaldehyde, and anisaldehyde. The second group is phenolic ester derivatives such as p‐hydroxymethylbenzoate, 2,4‐dihydroxymethylbenzoate, 2‐hydroxymethylbenzoate and 3,4,5‐trihydroxypropylbenzoate. The antimicrobial activity of these two classes were explored by cut plug method against Candida albicans SC5314, Aspergillus flavus, and Fusarium oxysporium as fungal organisms and Bacillus subtilis, Escherichia coli, and Staphylococcus aureus as bacterial organisms. It was found that the diameter of inhibition zone varied according to the active group in the modified polymer and the examined microorganism. In general, the modified polymers showed antimicrobial activity against the tested microorganisms. However, the polymer derivative of p‐chlorobenzaldehyde being the most effective on bacteria and fungi species. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Preparation and properties of bio‐based epoxy montomorillonite nanocomposites derived from polyglycerol polyglycidyl ether and ε‐polylysine

Glycerol polyglycidyl ether (GPE) and polyglycerol polyglycidyl ether (PGPE) were cured with ε‐poly(L ‐lysine) (PL) using epoxy/amine ratios of 1 : 1 and 2 : 1 to create bio‐based epoxy cross‐linked resins. When PGPE was used as an epoxy resin and the epoxy/amine ratio was 1 : 1, the cured neat resin showed the greatest glass transition temperature (T_g), as measured by differential scanning calorimetry. Next, the mixture of PGPE, PL, and montomorillonite (MMT) at an epoxy/amine ratio of 1 : 1 in water was dried and cured finally at 110°C to create PGPE‐PL/MMT composites. The X‐ray diffraction and transmission electron microscopy measurements revealed that the composites with MMT content 7–15 wt % were exfoliated nanocomposites and the composite with MMT content 20 wt % was an intercalated nanocomposite. The T_g and storage modulus at 50–100°C for the PGPE‐PL/MMT composites measured by DMA increased with increasing MMT content until 15 wt % and decreased at 20 wt %. The tensile strength and modulus of the PGPE‐PL/MMT composites (MMT content 15 wt %: 42 and 5300 MPa) were much greater than those of the cured PGPE‐PL resin (4 and 6 MPa). Aerobic biodegradability of the PGPE‐PL in an aqueous medium was ～ 4% after 90 days, and the PGPE‐PL/MMT nanocomposites with MMT content 7–15 wt % showed lower biodegradability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of polyaniline–organoclay nanocomposites

Polyaniline (PANI)–organoclay nanocomposites were prepared. Intercalation of aniline monomer into montmorillonite (MMT) modified by polyoxyalkylene was followed by subsequent oxidative polymerization of the aniline in the interlayer spacing. The organoclay was prepared by cation exchange process between sodium cation in MMT and onium ion in four different types of polyoxyalkylene diamine and triamine with different molecular weight. Infrared spectra confirm the electrostatic interaction between the positively charged onium group (NH₃⁺) and the negatively charged surface of MMT. X‐ray diffraction analysis provides a structural information. The absence of d₀₀₁ diffraction band in the nanocomposites was observed at certain types and contents of organoclay. Scanning electron microscopy and transmission electron microscopy were employed to determine the dispersion of the clay into PANI. The thermal degradation behavior of PANI in the nanocomposites has been investigated by thermogravimetric analysis. The weight loss suggests that the PANI chains in the nanocomposites are more thermally stable than pristine PANI. This improvement is attributed to the presence of nanolayers with high aspect ratio acting as barriers, thus shielding the diffusion of degraded PANI from the nanocomposites. The electrical conductivity of the nanocomposites was increased 30 times more than that of pure MMT at a certain concentration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal–oxidative degradation and accelerated aging behavior of polyamide 6/epoxy resin‐modified montmorillonite nanocomposites

Polyamide 6 (PA6) nanocomposites based on epoxy resin‐modified montmorillonite (EP‐MMT) were prepared by melt processing using a typical twin‐screw extruder. X‐ray diffraction combined with transmission electron microscopy was applied to elucidate the structure and morphology of PA6/EP‐MMT nanocomposites, suggesting a nearly exfoliated structure in the nanocomposite with 2 wt % EP‐MMT (PA6/2EP‐MMT) and a partial exfoliated‐partial intercalated structure in PA6/4 wt %EP‐MMT nanocomposite (PA6/4EP‐MMT). The thermogravimetric analysis under air atmosphere was conducted to characterize the thermal–oxidative degradation behavior of the material, and the result indicated that the presence of EP‐MMT could inhibit the thermal‐oxidative degradation of PA6 effectively. Accelerated heat aging in an air circulating oven at 150°C was applied to assess the thermal–oxidative stability of PA6 nanocomposites through investigation of reduced viscosity, tensile properties, and chemical structure at various time intervals. The results indicated that the incorporation of EP‐MMT effectively enhanced the thermal–oxidative stability of PA6, resulting in the high retention of reduced viscosity and tensile strength, and the low ratio of terminal carboxyl group to amino group. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40825.     

Synthesis of bio‐based polymeric nanocomposites from acrylated epoxidized soybean oil and montmorillonite clay in the presence of a bio‐based intercalant

Polymeric nanocomposites were synthesized from functionalized soybean‐oil‐based polymer matrix and montmorillonite (MMT) clay using an in situ free radical polymerization reaction. Acrylated epoxidized soybean oil combined with styrene was used as the monomer. Organophilic MMT (OrgMMT) was obtained using a quaternized derivative of methyl oleate, which was synthesized from olive oil triglyceride, as a renewable intercalant. The resultant nanocomposites were characterized using X‐ray diffraction and atomic force microscopy. The effect of increased nanofiller loading on the thermal and mechanical properties of the nanocomposites was investigated using thermogravimetric analysis and dynamic mechanical analysis. It was found that the desired exfoliated nanocomposite structure was achieved when the OrgMMT loading was 1 and 2 wt%, whereas a partially exfoliated or intercalated nanocomposite was obtained for 3 wt% loading. All the nanocomposites were found to have improved thermal and mechanical properties as compared with virgin acrylated epoxidized soybean‐oil‐based polymer matrix. The nanocomposite containing 2 wt% OrgMMT clay was found to have the highest thermal stability and best dynamic mechanical performance. Copyright © 2010 Society of Chemical Industry     

Preparation,characterization, and thermal properties of polystyrene‐block‐quaternized poly(4‐vinylpyridine)/Montmorillonite nanocomposites

Polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) was synthesized by two steps of reversible addition‐fragmentation transfer (RAFT) polymerization of styrene (St) and 4‐vinylpyridine (4VP) successively. After P4VP block was quaternized with CH₃I, PS‐b‐quaternized P4VP/montmorillonite (PS‐b‐QP4VP/MMT) nanocomposites were prepared by cationic exchange reactions of quaternary ammonium ion in the PS‐b‐QP4VP with ions in MMT. The results obtained from X‐ray diffraction (XRD) and transmission electron microscopy (TEM) images demonstrate that the block copolymer/MMT nanocomposites are of intercalated and exfoliated structures, and also a small amount of silicates' layers remained in the original structure; differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) results show that the nanocomposites displayed higher glass transition temperature (T_g) and higher thermal stability than that of the corresponding copolymers. The blending of PS‐b‐QP4VP/MMT with commercial PS makes MMT to be further separated, and the MMT was homogeneously dispersed in the polymer matrix. The enhancement of thermal stability of PS/PS‐b‐QP4VP/MMT is about 20°C in comparison with commercial PS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1950–1958, 2006     

Exertion of Inhibiting Effect by Aluminosilicate Layers on Swelling of Solution Blended EVA/Clay Nanocomposite

Summary: Ethylene vinyl acetate (EVA) copolymer/dodecyl ammonium ion intercalated montmorillonite (12Me‐MMT) nanocomposites were swelled in xylene under atmospheric condition. Swelling index of these nanocomposites decreased with filler loading indicating that the solvent uptake of these nanocomposites was inversely related to the filler contents. The volume fractions of nanocomposites showed an increasing trend with filler concentration because of unswelling effect exerted by aluminosilicate layers. The cross‐link density was determined using the Flory‐Rehner equation and it was observed that the cross‐link density of these nanocomposites also showed an increasing trend with increasing filler loading. Free energy change (ΔG_mix) and the change in entropy (ΔS_mix) on swelling of EVA/12Me‐MMT nanocomposites in xylene were calculated and these values reaffirmed that the interaction between polymer chains and silicate layers was very strong which induced remarkable inhibiting ability on EVA matrix when swelled in xylene.

TEM photograph of EVA/12Me‐MMT nanocomposite containing 8 wt.‐% 12Me‐MMT.     

Synthesis and characterization of polyurethane/organo-montmorillonite nanocomposites

Polyurethane (PU)/organo-montmorillonite nanocomposites were prepared by in situ polymerization of toluene diisocyanate and butanediol in the presence of different contents of organo-montmorillonite (9–18 mass%). Organo-montmorillonite were prepared by an ion exchange process of sodium montmorillonite with –NH₃⁺ groups in polyoxyalkylene amine hydrochloride with two different molecular masses of 403 and 5000. To change the degree of surface modification, sodium montmorillonite was reacted with polyoxyalkylene amine hydrochloride in equivalent ratios (1:1 and 1:2). Dimethyl formamide (DMF) was used as a swelling agent for the prepared organo-montmorillonite. Different nanocomposite structures, depending on the molecular mass of the polyoxyalkylene and the degree of surface modification of montmorillonite were studied. The results of X-ray analysis and transmission electron microscopy showed that the organo-montmorillonite with polyoxyalkylene of higher molecular mass (T₅₀₀₀) produced the exfoliated PU nanocomposites; (T₄₀₃), led to an intercalated structure. Nanocomposites exhibited lower water adsorption values and higher thermal stability than that of pure PU₀. In addition, the hardness of the nanocomposites was measured.     

Poly(vinyl alcohol) nanocomposites with different clays: Pristine clays and organoclays

Poly(vinyl alcohol) (PVA)/clay nanocomposites were synthesized using the solution intercalation method. Na ion‐exchanged clays [Na⁺–saponite (SPT) and Na⁺–montmorillonite (MMT)] and alkyl ammonium ion‐exchanged clays (C₁₂–MMT and C₁₂OOH–MMT) were used for the PVA nanocomposites. From the morphological studies, the Na ion‐exchanged clay is more easily dispersed in a PVA matrix than is the alkyl ammonium ion‐exchanged clay. Attempts were also made to improve both the thermal stabilities and the tensile properties of PVA/clay nanocomposite films, and it was found that the addition of only a small amount of clay was sufficient for that purpose. Both the ultimate tensile strength and the initial modulus for the nanocomposites increased gradually with clay loading up to 8 wt %. In C₁₂OOH–MMT, the maximum enhancement of the ultimate tensile strength and the initial modulus for the nanocomposites was observed for blends containing 6 wt % organoclay. Na ion‐exchanged clays have higher tensile strengths than those of organic alkyl‐exchanged clays in PVA nanocomposites films. On the other hand, organic alkyl‐exchanged clays have initial moduli that are better than those of Na ion‐exchanged clays. Overall, the content of clay particles in the polymer matrix affect both the thermal stability and the tensile properties of the polymer/clay nanocomposites. However, a change in thermal stability with clay was not significant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3208–3214, 2003