A Spray‐Filming Self‐Healing Hydrogel Fabricated from Modified Sodium Alginate and Gelatin as a Bacterial Barrier

Self‐healing hydrogels as wound dressings still face challenges in infection prevention, especially in the dressing of mass wounds, due to their inflexibility and the slow formation of the protective film on the wound. Therefore, designing a spray‐filming (rapid‐forming) hydrogel that can serve as a bacterial barrier is of particular significance in the development of wound dressings. Here, a self‐healing hydrogel based on adipic acid dihydrazide‐modified gelatin (Gel‐ADH) and monoaldehyde‐modified sodium alginate(SA‐mCHO) is prepared. Using dynamic, Schiff base bonds, the hydrogels exhibit excellent self‐healing properties. Moreover, the gelation time of SA‐mCHO/Gel‐ADH (SG) hydrogels is shortened to 2–21 s, resulting in rapid filming by spraying the two precursor solutions. In addition, the rapid spray‐filming ability might offer sufficient flexibility and rapidity for dealing with mass and irregular wounds. Notably, the bacterial barrier experiments show that the SG hydrogel films could form an effective barrier to Staphylococcus aureus and Candida albicans for 12 h. Therefore, SG hydrogels could be used in wound dressings and they show great promise in applications associated with mass and irregular traumas.     

A Bi‐Layer PVA/CMC/PEG Hydrogel with Gradually Changing Pore Sizes for Wound Dressing

Wound dressings are vital for cutaneous wound healing. In this study, a bi‐layer dressing composed of polyvinyl alcohol/carboxymethyl cellulose/polyethylene glycol (PVA/CMC/PEG) hydrogels is produced through a thawing–freezing method based on the study of the pore size of single‐layer hydrogels. Then the physical properties and healing of full‐thickness skin defects treated with hydrogels are inspected. The results show that the pore size of the single‐layer PVA/CMC/PEG hyrogel can be controlled. The obtained non‐adhesive bi‐layer hydrogels show gradually increasing pore sizes from the upper to the lower layer and two layers are well bonded. In addition, bi‐layer dressings with good mechanical properties can effectively prevent bacterial penetration and control the moisture loss of wounds to maintain a humid environment for wounds. A full‐thickness skin defect test shows that bi‐layer hydrogels can significantly accelerate wound closure. The experiment indicates that the bi‐layer PVA/CMC/PEG hydrogels can be used as potential wound dressings.     

Study on intelligent deformation characteristics of temperature‐driven hydrogel actuators prepared via molding and 3D printing

The poly‐N‐isopropylacrylamide intelligent hydrogel actuators with high mechanical strength and efficient temperature responses were successfully prepared via molding and three‐dimensional (3D) printing. Addition of nanofibrillated cellulose (NFC) effectively improved the crosslinking density and viscosity of hydrogels, enhancing the mechanical strength and 3D printable property. Based on sufficient polymerization on interface, bilayer hydrogel actuator prepared via molding exhibited efficient bending/unbending deformations. Bending degree in poikilothermy temperature ranging from 25°C to 55°C was higher than that in constant temperature of 55°C. Inspired by the rheology regulation of NFC, 3D printing intelligent hydrogel actuators with NFC content of 10 mg/mL were polymerized efficiently by ultraviolet irradiation. Self‐driven deformation characteristics of 3D printed intelligent hydrogels actuators were regulated via printing parameters including angle, width and length ratio and filling rate of the layered network structure model. The prepared hydrogel material system with molding and 3D printing ability provided material candidates for design and preparation of intelligent soft actuator and robot.     

Injectable and self-healing hydrogels with tissue adhesiveness and antibacterial activity as wound dressings for infected wound healing

The design of wound dressings with excellent self-healing ability, adequate adhesion, good biocompatibility, and potential antibacterial ability is of great significance for the healing of infected wounds arising from human activities. Herein, a series of multi-functional hydrogel dressings, poly(ionized isocyanoethyl methacrylate-glutamine)/poly(hexamethylene guanidine) (iG_x/PHMG_y) hydrogels, were obtained through homopolymerization of fully ionized isocyanoethyl methacrylate-glutamine (iIEM-Gln) in the presence of poly(hexamethylene guanidine) (PHMG), in which strong hydrogen bonds were formed among urea groups in the P (iIEM-Gln) chain to form a stable hydrogel network. The prepared iG_x/PHMG_y hydrogels exhibited adequate self-healing ability and tissue adhesion, which could be firmly adhered to the wound surface and remained intact during application. In addition, the presence of PHMG imparted good antibacterial activity to the hydrogels for the effective promotion of the wound healing in S. aureus infected skin wound on mice. Overall, this multi-functional hydrogel provides a facile and effective strategy for the design of infected wound dressings, and may show great potential in clinical applications.     

Hydrogel Complex Containing the Antimicrobial Peptide HX-12C Accelerates Healing of Infected Wounds

Bacterial infections of the wound surface can be painful for patients, and traditional dressings do not effectively address this problem. In this study, an antimicrobial wound dressing is prepared using a novel antimicrobial peptide, HX-12C. This hydrogel system is based on the natural biomaterials sodium alginate and gelatin, utilizing calcium carbonate as a source of Ca²⁺, and ionic cross-linking is facilitated by lowering the solution pH. The resulting sodium alginate/gelatin HX-12C-loaded hydrogel (CaAGEAM) has good mechanical and adhesion properties, biocompatibility and in vitro degradability. Its extraordinary antibacterial efficacy (>98%) is verified by an antibacterial experiment. More importantly, in vivo experiments further demonstrate its healing-promotion effect, with a 95% wound healing rate by day 9. Tissue staining demonstrates that the hydrogel containing antimicrobial peptides is effective in suppressing inflammation. The dressing promotes wound healing by stimulating the deposition of skin appendages and collagen. The results of this study suggest that composite hydrogels containing antimicrobial peptides are a promising new type of dressing to promote the healing of infected wounds.     

Improvement of dermal burn healing by combining sodium alginate/chitosan-based films and low level laser therapy

This paper aimed to evaluate the improvement of burn wounds healing by sodium alginate/chitosan-based films and laser therapy. Natural polymers with different biological activities are widely used as film dressings to improve wound healing. Lasers arrays accelerate the healing repair of soft tissue injuries. Burn procedures were performed on the backs of 60 male rats assigned into six groups: untreated (CTR), dressed with cellulose films (CL), dressed with sodium alginate/chitosan-based films (SC), laser-irradiated undressed wounds (LT), laser-irradiated wounds with cellulose (CLLT) and sodium alginate/chitosan-based films (SCLT). Laser therapy was applied for 7 days. Animals of each group were euthanised 8 and 14 days after the burn procedures. The inflammatory reaction was significantly more intense in the CTR group than in the irradiated groups after 8 and 14 days. Laser therapy stimulated myofibroblastic differentiation in 8 days, with or without dressing films. Combined laser therapy and both dressings improved epithelisation, blood vessels formation and collagenization, promoted rapid replacement of type III for type I collagen and favored the better arrangement of the newly formed collagen fibres. The combination of laser therapy and sodium alginate/chitosan-based dressing improves burn healing, apparently by modulating the epithelisation, blood vessels formation and collagenization processes.     

Biodegradable Sodium Alginate/Carrageenan/Cellulose Composite Hydrogel Wound Dressings Containing Herbal Extracts for Promoting Blood Coagulation and Wound Healing

Accelerating the coagulation process and preventing wound infection are major challenges in the wound care process. Therefore, new multifunctional wound dressings with procoagulant, antibacterial, and antioxidant properties have enormous potential for clinical application. In this work, biodegradable hydrogels containing herbal extracts are prepared for wound dressings. First, the active ingredients are extracted from Amaranthus spinosus (A. spinosus) and Rubia cordifolia (R. cordifolia) and added to the hydrogels prepared from microcrystalline cellulose (MCC), carrageenan, and sodium alginate. Then the composite hydrogels are air-dried to obtain the wound dressings. The wound dressings prepared in this work have good biocompatibility and moisture retention. The mechanical properties of the wound dressings are further improved with the addition of MCC. Besides, the wound dressings have excellent procoagulant, antibacterial, and antioxidant properties due to the presence of R. cordifolia extract. Overall, the most effective group of wound dressings with different ingredient formulations reduces clotting time by 75% and largely inhibits bacterial growth. The wound dressings perform well in the animal wound models to promote wound healing. These results indicate that the hydrogel wound dressings prepared in this work have great potential for medical applications.     

Positively and negatively charged ionic modifications to cellulose assessed as cotton-based protease-lowering and hemostatic wound agents

Recent developments in cellulose wound dressings targeted to different stages of wound healing have been based on structural and charge modifications that function to modulate events in the complex inflammatory and hemostatic phases of wound healing. Hemostasis and inflammation comprise two overlapping but distinct phases of wound healing wherein different dressing material properties are required to bring pathological events under control when they present as a result of trauma or chronic wounds. Thus, we have designed cellulose wound dressings with properties that function through modified fiber surface properties to lower protease levels in the chronic wound and promote clotting in hemorrhaging wounds. With this in mind three finishing chemistries utilizing traditional pad-dry-cure approaches were explored for their potential to confer charged properties to cotton dressings. Cellulose dressings designed to remove cationic serine proteases from highly exudative chronic wounds were created to present negatively charged fibers as an ion exchange mechanism of protease-lowering. Phosphorylated cotton and polycarboxylic acid crosslinked cotton were prepared to examine their ability to remove human neutrophil elastase (HNE) from surrogate wound fluid. A cellulose phosphorylation reaction utilizing sodium hexametaphosphate: urea was explored to optimize cellulose phosphorylation as a function of HNE sequestration efficacy. Acid catalyzed cross linking of cellulose with butane-tetracarboxylic acid also resulted in a negatively charged dressing that removed HNE from solution more effectively than phosphorylated cellulose. Collagenase sequestration was also assessed with phosphorylated cellulose and polycarboxylic acid cross linked cellulose derivatives. Butanetetracarboxylic acid and phosphorylated cellulose functioned to remove collagenase from solution most effectively. Cellulose dressings designed to accelerate thrombosis and aggregation of blood platelets were prepared with a view to examining derivatized cotton fibers bearing a net positive charge to promote hemostasis. Cellulose and chitosan dressings bearing an aminoglucan functionality were created by grafting chitosan on cotton and preparing aminized cotton. The preparation of chitosan-grafted cotton dressings was completed with a citric acid grafting onto cellulose. Aminized cotton was functionalized as an ethylamino-ether cellulose derivative. The chitosan-grafted and aminized cotton demonstrated a dose response gelling of citrated sheep blood.     

A Shear-Thinning,Self-Healing,Dual-Cross Linked Hydrogel Based on Gelatin/Vanillin/Fe3+/AGP-AgNPs: Synthesis,Antibacterial, and Wound-Healing Assessment

A shear-thinning and self-healing hydrogel based on a gelatin biopolymer is synthesized using vanillin and Fe³⁺ as dual crosslinking agents. Rheological studies indicate the formation of a strong gel found to be injectable and exhibit rapid self-healing (within 10 min). The hydrogels also exhibited a high degree of swelling, suggesting potential as wound dressings since the absorption of large amounts of wound exudate, and optimum moisture levels, lead to accelerated wound healing. Andrographolide, an anti-inflammatory natural product is used to fabricate silver nanoparticles, which are characterized and composited with the fabricated hydrogels to imbue them with anti-microbial activity. The nanoparticle/hydrogel composites exhibit activity against Escherichia coli, Staphylococcus aureus, and Burkholderia pseudomallei, the pathogen that causes melioidosis, a serious but neglected disease affecting southeast Asia and northern Australia. Finally, the nanoparticle/hydrogel composites are shown to enhance wound closure in animal models compared to the hydrogel alone, confirming that these hydrogel composites hold great potential in the biomedical field.     

Hybrid Supramolecular and Colloidal Hydrogels that Bridge Multiple Length Scales

Hybrid nanocomposites were constructed based on colloidal nanofibrillar hydrogels with interpenetrating supramolecular hydrogels, displaying enhanced rheological yield strain and a synergistic improvement in storage modulus. The supramolecular hydrogel consists of naphthyl‐functionalized hydroxyethyl cellulose and a cationic polystyrene derivative decorated with methylviologen moieties, physically cross‐linked with cucurbit[8]uril macrocyclic hosts. Fast exchange kinetics within the supramolecular system are enabled by reversible cross‐linking through the binding of the naphthyl and viologen guests. The colloidal hydrogel consists of nanofibrillated cellulose that combines a mechanically strong nanofiber skeleton with a lateral fibrillar diameter of a few nanometers. The two networks interact through hydroxyethyl cellulose adsorption to the nanofibrillated cellulose surfaces. This work shows methods to bridge the length scales of molecular and colloidal hybrid hydrogels, resulting in synergy between reinforcement and dynamics.     

Natural okra-based hydrogel for chronic diabetic wound healing

As a representative of chronic wounds, the long-term high levels of oxidative stress and blood sugar in chronic diabetic wounds lead to serious complications, making them the biggest challenge in the research on wound healing. Many edible natural biomaterials rich in terpenes, phenols, and flavonoids can act as efficient antioxidants. In this study, okra extract was selected as the main component of a wound dressing. The okra extracts obtained via different methods comprehensively maintained the bioactivity of multiple molecules. The robust antioxidant properties of okra significantly reduced intracellular reactive oxygen species production, thereby accelerating the wound healing process. The results showed that okra extracts and their hydrogel dressings increased cell migration, angiogenesis, and re-epithelization of the chronic wound area, considerably promoting wound remodeling in diabetic rats. Therefore, okra-based hydrogels are promising candidates for skin regeneration and wider tissue engineering applications.     

可注射水凝胶在伤口敷料中的研究进展

目前,在伤口治疗中对伤口敷料的选择越来越严格。传统的伤口敷料如纱布、绷带、海绵等在伤口愈合过程中容易诱发细菌感染,延缓伤口愈合,甚至引发慢性并发症。可注射水凝胶具备良好的生物相容性,能够适应伤口的形状以填充伤口,且具备一定的抗菌活性,从而避免伤口感染,相比传统的水凝胶伤口敷料更具备医疗优势,因此在生物医药领域得到广泛关注。本文对天然型可注射水凝胶和复合型可注射水凝胶在伤口愈合中的研究进展进行了综述;也对可注射水凝胶的未来发展趋势进行了展望。     

Real-time monitoring flexible hydrogels based on dual physically cross-linked network for promoting wound healing

To achieve smart and personalized medicine, the development of hydrogel dressings with sensing properties and biotherapeutic properties that can act as a sensor to monitor of human health in real-time while speeding up wound healing face great challenge. In the present study, a biocompatible dual-network composite hydrogel (DNCGel) sensor was obtained via a simple process. The dual network hydrogel is constructed by the interpenetration of a flexible network formed of poly(vinyl alcohol) (PVA) physical cross-linked by repeated freeze-thawing and a rigid network of iron-chelated xanthan gum (XG) impregnated with Fe³⁺ interpenetration. The pure PVA/XG hydrogels were chelated with ferric ions by immersion to improve the gel strength (compressive modulus and tensile modulus can reach up to 0.62 MPa and 0.079 MPa, respectively), conductivity (conductivity values ranging from 9 × 10⁻⁴ S/cm to 1 × 10⁻³ S/cm) and bacterial inhibition properties (up to 98.56%). Subsequently, the effects of the ratio of PVA and XG and the immersion time of Fe³⁺ on the hydrogels were investigated, and DNGel3 was given the most priority on a comprehensive consideration. It was demonstrated that the DNCGel exhibit good biocompatibility in vitro, effectively facilitate wound healing in vivo (up to 97.8% healing rate) under electrical stimulation, and monitors human movement in real time. This work provides a novel avenue to explore multifunctional intelligent hydrogels that hold great promise in biomedical fields such as smart wound dressings and flexible wearable sensors.     

Hyaluronic acid-methacrylic anhydride/polyhexamethylene biguanide hybrid hydrogel with antibacterial and proangiogenic functions for diabetic wound repair

Diabetic wounds lead to a decrease in quality of life and an increase in mortality. Current treatment strategies include preventing bacterial adhesion while improving microcirculation. As a new type of wound dressing that imitates natural skin, hydrogel has gradually emerged with its excellent properties. However, existing hydrogels rarely achieve satisfactory results in promoting wound repair and antibacterial simultaneously. In this case, we prepared methacrylic anhydride chemically modified hyaluronic acid as a hydrogel matrix, added polyhexamethylene biguanide as an antibacterial component, and loaded sodium alginate/salidroside composite microspheres which could sustainably release salidroside and thus promote angiogenesis. Hybrid hydrogel (HAMA/PHMB-Ms) was synthesized via photocrosslinking, and its chemical structure, particle size distribution and microstructure were characterized. The satisfactory antibacterial properties of the HAMA/PHMB(15%)-Ms hydrogel were studied in vitro, and its antibacterial rates against E. coli and S. aureus were 97.85% and 98.56%, respectively. In addition, after demonstrating its good biocompatibility, we verified that the HAMA/PHMB-Ms hydrogel has increased granulation tissue formation, more collagen deposition, more subcutaneous capillary formation, and better wound healing than blank control, HAMA and HAMA/PHMB hydrogel on the back wound model of diabetic mice. The results confirmed that HAMA/PHMB-Ms hydrogel was a promising material for the treatment of the diabetic wounds.     

Preparation of Multi-Functional Quaternary Ammonium Chitosan/Surfactin Hydrogel and its Application in Wound Management

Hydrogel with a 3D network structure can cover the wound to stop the bleeding and support the host tissue infiltration and integration. In this study, an antibacterial hydrogel with hemostasis and the ability to promote wound healing is proposed. This hydrogel comprised surfactin, polyvinylpyrrolidone, and methacrylic anhydride (MA) grafted quaternary ammonium chitosan (CS-MA). The hydrogel formation is triggered by the ultraviolet-initiated polymerization of CS-MA, while the surfactin is complexed with the hydrogel through hydrogen bonding interaction. The results showed that this hydrogel is an adhesive hydrogel with shape adaptability, which can cover the wound surface and promote contact between the hydrogel and the wound surface. More importantly, this hydrogel can simulate the microenvironment of the primary extracellular matrix and increase collagen deposition, and inflammatory factor transformation. The designing of such a multi-functional hydrogel is expected to provide a novel approach to promoting the healing of wounds.     

Synthesis of a co-cross-linked nanocomposite hydrogels from poly(methyl vinyl ether-co-maleic acid)-polyethylene glycol and nanofibrillated cellulose

This study demonstrates the preparation of a renewable and biocompatible co-cross-linked nanocomposite hydrogel from poly(methyl vinyl ether-co-maleic acid), poly(ethylene glycol) and nanofibrillated cellulose (NFC). The cross-linking reaction was favored by the formation of ester linkages as evidenced by Fourier transform infrared spectroscopy. The increase in gel fraction content of the treated NFC varied from 22 to 85 % which exhibited an increase in degree of chemical cross-linking to form a rigid network with the addition of varying amount of NFC (20–60 %). This increase in gel rigidity influenced gel swelling, showing relatively reduced water uptake ability above 40 % NFC. Rheological measurements indicated the formation of gels with superior mechanical properties.     

Preparation and Application of Quaternized Chitosan- and AgNPs-Base Synergistic Antibacterial Hydrogel for Burn Wound Healing

Infection is the major reason that people die from burns; however, traditional medical dressings such as gauze cannot restrain bacterial growth and enhance the healing process. Herein, an organic- and inorganic-base hydrogel with antibacterial activities was designed and prepared to treat burn wounds. Oxidized dextran (ODex) and adipic dihydrazide grafted hyaluronic acid (HA-ADH) were prepared, mixed with quaternized chitosan (HACC) and silver nanoparticles to fabricate Ag@ODex/HA-ADH/HACC hydrogel. The hydrogel, composed of nature biomaterials, has a good cytocompatibility and biodegradability. Moreover, the hydrogel has an excellent antibacterial ability and presents fast healing for burn wounds compared with commercial Ag dressings. The Ag@ODex/HA-ADH/HACC hydrogel will be a promising wound dressing to repair burn wounds and will significantly decrease the possibility of bacterial infection.     

An Injectable Integration of Autologous Bioactive Concentrated Growth Factor and Gelatin Methacrylate Hydrogel with Efficient Growth Factor Release and 3D Spatial Structure for Accelerated Wound Healing

Growth factors are essential for wound healing owing to their multiple reparative effects. Concentrated growth factor (CGF) is a third-generation platelet extract containing various endogenous growth factors. Herein, a CGF extract solution is combined with gelatin methacrylate (GM) by physical blending to produce GM@CGF hydrogels for wound repair. The GM@CGF hydrogels show no immune rejection during autologous transplantation. Compared to CGF, GM@CGF hydrogels not only exhibit excellent plasticity and adhesivity but also prevent rapid release and degradation of growth factors. The GM@CGF hydrogels display good injectability, self-healing, swelling, and degradability along with outstanding cytocompatibility, angiogenic functions, chemotactic functions, and cell migration-promoting capabilities in vitro. The GM@CGF hydrogel can release various effective molecules to rapidly initiate wound repair, stimulate the expressions of type I collagen, transform growth factor β1, epidermal growth factor, and vascular endothelial growth factor, promote the production of granulation tissues, vascular regeneration and reconstruction, collagen deposition, and epidermal cell migration, as well as prevent excessive scar formation. In conclusion, the injectable GM@CGF hydrogel can release various growth factors and provide a 3D spatial structure to accelerate wound repair, thereby providing a foundation for the clinical application and translation of CGF.     

Acetate chitosan with CaCO3 doping form tough hydrogel for hemostasis and wound healing

In recent years, chitosan has been applied for wound management due to its properties of biocompatibility, biodegradability, antimicrobial activity, and low immunogenicity. But the poor water solubility in neutral pH limited its further application in clinical wound healing. To overcome this problem, acetate chitosan was developed and approved as commercial products for wound healing. However, the acidity of acetate chitosan was potentially allergenic, and the poor mechanical properties of its formed hydrogels also hindered the therapeutic efficacy in wound care. In this study, CaCO₃ was simply doped into acetate chitosan to form the wound dressing. After absorbing water, the H⁺ of acetate chitosan reacted with CaCO₃ to release Ca²⁺, resulting in acidity decreased. The production of Ca²⁺ and residue of CaCO₃ cross‐linked with chitosan to form a tough hydrogel by electrostatic interaction. The physical characteristics, swelling, mechanical testing, and blood clotting were evaluated. The results in vitro demonstrated that after doping CaCO₃ into acetate chitosan, the mechanical properties and blood clotting of the formed hydrogel were increased. Then, the evaluation of hydrogels in vivo revealed that it can also accelerate the wound healing by promoting re‐epithelization and collagen deposition. This simple way by doping CaCO₃ into acetate chitosan can increase wound healing, and it can also broad the application of acetate chitosan in clinical use.     

Polymer-based Biomaterials as Dressings for Chronic Stagnating Wounds

Chronic wounds, such as venous, pressure, and diabetic ulcers, are difficult to heal and represent a rising social and economical problem. Compared to acute wounds, non-healing wounds contain elevated levels of neutrophil elastase, pro-inflammatory cytokines (IL-1β, IL-6, IL-8), and matrix metalloproteases (MMP-2, MMP-9, MMP-13) as well as free radicals. Their overproduction perpetuates the inflammatory phase resulting in severe tissue damage and degradation of growth factors. Consequently, wound closure is prevented and the wound remains non-healing for month or even years. The increasing numbers of patients suffering from wounds that fail to heal are a significant challenge for health care professionals. Wound dressings play an important role in the entire management of these wounds. New materials and treatment strategies are needed to improve wound care. Recent advances in the field of biomaterials and their medical applications indicate the significance and potential of various natural polymers in the development of novel classes of wound dressings. Native polymers are an ideal source for bio-active wound dressings because of their availability and biocompatibility. Hence, several studies have been conducted to explore the influence of wound dressings consisting of collagen, oxidized regenerated cellulose, bacterial cellulose, chitosan, or alginate on the destructive milieu in chronic wounds.