A method of directly extracting multiwave angle-domain common-image gathers

Angle-domain common-image gathers (ADCIGs) can provide an effective way for migration velocity analysis and amplitude versus angle analysis in oil–gas seismic exploration. On the basis of multi-component Gaussian beam prestack depth migration (GB-PSDM), an alternative method of directly extracting multiwave ADCIGs is presented in this paper. We first introduce multi-component GB-PSDM, where a wavefield separation is proceeded to obtain the separated PP- and PS-wave seismic records before migration imaging for multiwave seismic data. Then, the principle of extracting PP- and PS-ADCIGs using GB-PSDM is presented. The propagation angle can be obtained using the real-value travel time of Gaussian beam in the course of GB-PSDM, which can be used to calculate the incidence and reflection angles. Two kinds of ADCIGs can be extracted for the PS-wave, one of which is P-wave incidence ADCIGs and the other one is S-wave reflection ADCIGs. In this paper, we use the incident angle to plot the ADCIGs for both PP- and PS-waves. Finally, tests of synthetic examples show that the method introduced here is accurate and effective.     

角度域弹性波Kirchhoff叠前深度偏移速度分析方法

为提高地震成像结果的准确性并真实反映实际地震波场在介质中的传播特性,应该充分利用多分量地震数据的矢量特征进行弹性波成像,其中,最为棘手的问题是纵横波偏移速度场的确定,为此,本文提出了直接利用多分量地震数据进行弹性波角度域偏移速度分析的方法.基于空移成像条件的弹性波Kirchhoff偏移方程提取了弹性波局部偏移距域共成像...     

基于动态图像变形的PP与PS波层位直接匹配

多分量地震资料的矢量偏移、多波地震资料的联合解释与反演均需要估算纵横波的速度比,实现纵波与转换横波在时间或深度域的匹配.基于DTW,本文实现了一种适用于PP与PS波直接匹配的动态图像变形算法.该算法分为三个部分:首先,使用二阶对称动态规划算法逐样点递归计算PP与PS波走时或深度的误差累积和;其次,在以误差累积和为目标函数的回溯阶段设定变形窗,并在纵横波速比约束的变形窗内递归回溯搜索匹配路径;最后,根据最大相关系数判定准则在匹配路径中确定最佳匹配路径,获得使PP与PS波匹配的拉伸或压缩时移量.利用所获得的拉伸压缩时移量计算纵横波速度比就可以实现PP与PS波之间的匹配.模型与实际陆上多分量地震资料测试结果表明:该方法具有较高的匹配精度,且对于信噪比、相似度较低的多分量地震资料,该方法也能产生较好的匹配效果.     

基于吸收衰减补偿的多分量高斯束逆时偏移

高斯束逆时偏移结合了射线类偏移的高计算效率和波动方程逆时偏移的高精度,能很好地处理焦散点、大倾角成像问题,并且具有面向目标成像的能力.多分量地震资料的偏移技术可以对地下复杂构造进行更准确的成像,由于实际地下介质具有黏滞性,研究黏弹性叠前逆时偏移具有一定的现实意义.本文采用高斯束逆时偏移方法对多分量地震数据进行吸收衰减补偿,首先分别给出纵波和转换波共炮域高斯束叠前逆时偏移方法原理,在此基础上推导补偿吸收衰减的表达式,校正Q引起的振幅衰减和相位畸变,实现基于吸收衰减补偿的多分量高斯束叠前逆时偏移.数值模型的测试结果显示,在考虑地下介质的黏滞性时,本文方法具有更高的成像分辨率.     

Elastic reverse-time migration based on amplitude-preserving P- and S-wave separation

Imaging the PP- and PS-wave for the elastic vector wave reverse-time migration requires separating the P- and S-waves during the wave field extrapolation. The amplitude and phase of the P- and S-waves are distorted when divergence and curl operators are used to separate the P- and S-waves. We present a P- and S-wave amplitude-preserving separation algorithm for the elastic wavefield extrapolation. First, we add the P-wave pressure and P-wave vibration velocity equation to the conventional elastic wave equation to decompose the P- and S-wave vectors. Then, we synthesize the scalar P- and S-wave from the vector Pand S-wave to obtain the scalar P- and S-wave. The amplitude-preserved separated P- and S-waves are imaged based on the vector wave reverse-time migration (RTM). This method ensures that the amplitude and phase of the separated P- and S-wave remain unchanged compared with the divergence and curl operators. In addition, after decomposition, the P-wave pressure and vibration velocity can be used to suppress the interlayer reflection noise and to correct the S-wave polarity. This improves the image quality of P- and S-wave in multicomponent seismic data and the true-amplitude elastic reverse time migration used in prestack inversion.     

Imaging of offset VSP data acquired in complex areas with modified reverse-time migration

A modified reverse-time migration algorithm for offset vertical seismic profiling data is proposed. This algorithm performs depth imaging of target areas in the borehole vicinity without taking into account the overburden. Originally recorded seismograms are used; reliable results can be obtained using only the velocity profile obtained along the well. The downgoing wavefield emitted from a surface source is approximated in the target area using the transmitted P-wave, recorded by the receivers deployed in the well. This is achieved through a reverse-time extrapolation of the direct transmitted P-wave into the target area after its separation in offset vertical seismic profiling seismograms generated using a finite-difference scheme for the solution of the scalar wave equation.
The proposed approach produces 'kinematically' reliable images from reflected PP- and PS-waves and, furthermore, can be applied as a salt proximity tool for salt body flank imaging based on the transmitted PS-waves. Our experiments on synthetic data demonstrate that the modified reverse-time migration provides reliable depth images based on offset vertical seismic profiling data even if only the velocity profile obtained along the borehole is used.     

矢量黏弹性衰减补偿高斯束偏移

基于弹性波动理论的多波多分量高斯束偏移具有计算效率高和成像准确等优点.但是目前此方法没有考虑实际地下介质的黏弹性对地震波传播的影响,从而无法补偿能量衰减和校正相位畸变,这使得该方法对一些含高黏弹性地层的成像效果不佳.针对衰减区域的成像问题,本文提出一种黏弹性衰减补偿高斯束偏移方法,该方法以多波多分量矢量波场弹性高斯束偏移方法为基础,在偏移过程中沿射线路径通过引入品质因子Q来考虑黏弹性影响并进行衰减补偿.该方法能够在偏移过程中实现PP波和PS波的自动分离及分别成像.同时,本文给出了在矢量波场偏移过程中提取角度域共成像点道集的方法,以便用于成像质量控制,并为后续速度和黏弹性参数反演提供所需的数据.本文利用2D层状模型和洼陷模型进行了方法测试,其成像结果验证了本文所提出的黏弹性衰减补偿高斯束偏移方法的可行性和有效性.     

Numerical modeling of PP- and PS-wave azimuthal anisotropy in HTI media

This study focuses on the factors that may affect the feasibility of performing elliptical anisotropy analysis on azimuthal PP- and PS-wave data in HTI media, with the aim of using the modeling results as guidance in real seismic data application. Our results reveal that there is an offset limitation for both PP- and PS-waves in elliptical anisotropy fitting, and that PS-waves show a wider applicable offset range and larger observable azimuthal anisotropy than PP-waves. The major axis of the elliptical fit to the amplitudes of the R-component is perpendicular to the fracture strike, which is opposite to that in PP-wave analysis. The azimuthal interval travel time of PS-waves shows a nearly elliptical distribution and the major axis of the fit ellipse is perpendicular to the fracture strike, which is same as that in PP-wave analysis. For data within the applicable offset range, the anisotropic magnitude obtained from amplitude and travel time attributes of PP- and PS-waves exhibits a dependence on fracture density, and the major to minor axis ratio of the fit ellipse may be used to infer the relative distribution of fracture densities.     

层状各向异性介质转换波克希霍夫叠前时间偏移

在克希霍夫叠前时间偏移处理中,地震波走时的计算方法是决定大偏移距地震资料成像品质的重要因素.在常规的三维转换波各向异性叠前时间偏移公式中,走时的计算是基于等效单层各向异性介质的非双曲线方法.用这种方法处理的成像道集,在偏移/深度比超过一定阈值后,成像道集中的反射同相轴将出现过偏现象,这种偏移不平的同相轴将影响偏移叠加的最佳响应,使得偏移成像波组呈低频化特征,最终降低三维转换波偏移成像质量.我们采用层状介质的走时计算方法代替常规算法,并且利用了常规方法的转换波各向异性偏移速度模型.基于层状介质的算法能够提高大偏移距转换波走时计算精度,克服中浅地层大偏移距远道成像道集中反射同相轴逐渐上翘的问题.两个地区的三维转换波资料处理结果证实,基于层状各向异性介质的转换波克希霍夫叠前时间偏移方法,明显改善了反射成像剖面的连续性和分辨率,提高成像剖面构造的可解释性.     

叠前纵波和转换波地震资料Q值提取及反Q滤波(英文)

纵波和转换波联合的多波地震勘探技术是解决复杂油气勘探的有效技术,提高转换波的分辨率是其关键问题之一。影响转换波分辨率的主要原因是地层对地震波的吸收,有效地计算地层Q值、消除地层吸收对转换波传播的影响,是提高转换波分辨率的关键。本文提出了从叠前转换波道集中估算横波Q值的方法,并利用沿射线路径的波场延拓,将一种稳定有效的反Q滤波方法应用到叠前共炮点纵波和转换波道集的衰减补偿中。模型资料结果表明,本文提出的估算转换横波Q值的方法精度较高;模型资料和实际资料的吸收补偿结果表明,此稳定全反Q滤波能有效地提高叠前纵波和转换波资料的分辨率。     

三维倾斜界面PS转换波CMP道集时距及参数估计

在PS转换波资料处理过程中,往往需要联合P波资料提供相应的模型.在实际应用中存在P波和PS转换波层位对比困难.本文仅利用PS转换波数据,通过三维倾斜界面PS转换波CMP道集精确时距关系推导了近似时距解析表达式;分析了PS波的精确与近似时距关系随测线方位、界面倾角与倾向的变化规律及其拟合误差;并讨论了近似时距关系的三个时距参数随方位的变化特征;理论上给出描述时距的三维倾斜界面倾角、倾向、深度、纵波速度和横波速度这5个独立参数的估计方法,并通过理论模拟数据证明了该方法的可行性.     

平均入射角道集PP波与PS波联合反演

在界面两侧地层的弹性参数弱反差的假设难以成立的情况下,本文提出用平均入射角道集进行PP波与PS波的联合反演.首先,在PP波与PS波AVA(amplitude versus angle,振幅随入射角变化)道集的基础上,分别选择小入射角范围与大入射角范围的AVA道集进行局部加权叠加,以获得由两个角度组成的平均入射角道集,并作为后续反演的输入数据.然后,再通过最小二乘原理建立了PP波与PS波联合反演目标函数,推导了模型修改量的向量公式,建立了平均入射角道集联合反演的流程.模型数据与实际数据的测试结果表明:在信噪比较低、地层弹性参数反差较大、层厚较薄的情况下,该反演方法的精度在很大程度上超过了基于近似反射系数的反演方法,为复杂油气藏勘探提供了新的思路.     

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.     

首都圈地区远震基底PS波分裂研究

远震PS波的一个重要优势是其携带台站下方介质的各向异性信息.本文基于首都圈数字地震台网2002-2003年记录的高精度远震波形资料,从基底PS转换波入手,采用三分量PS波分裂偏振分析方法,获取各个台站下方来自基底的PS波分裂参数,包括快波偏振方向和快、慢波的时间延迟等,分析台站下方浅部地壳介质的各向异性特征.几个台站的研究结果显示,该方法保持了原始波场的信息,可以用来分析PS波分裂特征;短周期台站记录的远震来自基底的PS波具有干扰少、信噪比高的特点,存在分裂现象,各台站快慢波时差超出我们的预期值,平均在0.1~0.2 s左右.此研究可与横波分裂相对比,对于认识地壳各向异性及其内部的应力状态,分析其构造及地震活动现象有较大的意义.     

苏北大陆科学钻探靶区深反射地震的叠前深度偏移

由于深反射地震数据具有信噪比低和记录长度长等特点,叠前深度偏移方法的应用有许多困难．为此,我们研究了一种适合于深反射地震的叠前深度偏移方法;包括：用逆风有限差分方法计算程函方程;在常规速度扫描的基础上,用协方差控制提高速度分析精度;用联合反演算法计算层速度,再插值后得到初始速度模型;用Ｋｉｒｃｈｈｏｆｆ法作为偏移速度分析工具,求得最终的速度模型;最终的速度模型作为有限差分深度偏移的输入,求得最终的偏移结果．用该方法对“中国大陆科学深钻工程”东海二维深反射地震数据ＤＨ－４线进行了叠前深度偏移,取得了良好的效果。     

Bayesian Markov chain Monte Carlo inversion for anisotropy of PP- and PS-wave in weakly anisotropic and heterogeneous media

A single set of vertically aligned cracks embedded in a purely isotropic background may be considered as a long-wavelength effective transversely isotropy (HTI) medium with a horizontal symmetry axis. The crack-induced HTI anisotropy can be characterized by the weakly anisotropic parameters introduced by Thomsen. The seismic scattering theory can be utilized for the inversion for the anisotropic parameters in weakly anisotropic and heterogeneous HTI media. Based on the seismic scattering theory, we first derived the linearized PP- and PS-wave reflection coefficients in terms of P- and S-wave impedances, density as well as three anisotropic parameters in HTI media. Then, we proposed a novel Bayesian Markov chain Monte Carlo inversion method of PP- and PS-wave for six elastic and anisotropic parameters directly. Tests on synthetic azimuthal seismic data contaminated by random errors demonstrated that this method appears more accurate, anti-noise and stable owing to the usage of the constrained PS-wave compared with the standards inversion scheme taking only the PP-wave into account.     

TI介质局部角度域高斯束叠前深度偏移成像

各向异性射线理论基础上的局部角度域叠前深度偏移方法能够为深度域构造成像与基于角道集的层析反演提供有力支撑,但是对于复杂地质构造而言,高斯度叠前深度偏移在不失高效、灵活等特点的情况下,具有明显的精度优势.为此,本文研究局部角度域理论框架下的高斯束叠前深度偏移方法.为提高算法效率与实用性,文中讨论了一种从经典弹性参数表征的各向异性介质运动学和动力学射线方程演变而来的由相速度表征的简便形式,并提出了一种比较经济的各向异性高斯束近似合成方案.结合地震波局部角度域成像原理,讨论一种适合高斯束偏移的角度参数计算方法.国际上通用的理论模型合成数据试验表明：相比局部角度域Kirchhoff叠前深度偏移成像方法,本文方法具有更高的成像精度与抗噪能力,既适用于复杂构造成像,也可为TI介质深度域偏移速度分析与模型建立提供高效的偏移引擎.     

逆时偏移中用Poynting矢量高效地提取角道集

逆时偏移在提高复杂介质的成像质量方面表现出了优越的性能,但逆时偏移对速度精度的要求比较高.共成像点道集是一种非常重要的叠前深度偏移输出,它除了能为深度偏移处理提供速度信息外,还能够提供振幅和相位等信息,为后续的属性解释提供依据.本文提出一种在逆时偏移成像过程中提取角度域共成像点道集的方法,该方法采用矢量波动方程进行波场传播,并用能流密度矢量(Poynting vector)计算反射角,最后应用互相关成像条件输出角度域共成像点道集.该方法简单易于实现,且几乎不需要额外的计算量和存储量,非常适合于进行逆时偏移速度分析,同时提出的角道集也能用于进行AVA等分析.最后通过模型算例和实际数据检验了方法的有效性和优越性.     

多分量地震数据的成像技术

从水平叠加成像、叠前时间偏移以及叠前深度偏移三个方面总结了多分量地震成像技术的发展现状.在水平叠加成像方面,分析了转换波与纵波在道集抽取方面的差异,总结了常用的转换点计算公式,着重对比了由炮检坐标映射地下的转换点以及由地表的网格节点映射地下的反射点两种共转换点道集抽取方式各自的优缺点以及应用化程度.概述了各向同性与各向异性叠前时间偏移技术的基本原理,总结了多分量偏移技术发展以及配套软件的工业应用现状,并对最近发展的层匹配多分量偏移技术进行了介绍.最后,从射线理论以及波场延拓理论的角度总结了多分量叠前深度偏移的发展现状与存在的问题,介绍了标量偏移与矢量偏移的差异,并提出了深度域速度建模存在的问题.     

Residual curvature migration velocity analysis for angle domain common imaging gathers

Pre-stack depth migration velocity analysis is one of the keys to influencing the imaging quality of pre-stack migration. In this paper we cover a residual curvature velocity analysis method on angle-domain common image gathers (ADCIGs) which can depict the relationship between incident angle and migration depth at imaging points and update the migration velocity. Differing from offset-domain common image gathers (ODCIGs), ADCIGs are not disturbed by the multi-path problem which contributes to imaging artifacts, thus influencing the velocity analysis. On the basis of horizontal layers, we derive the residual depth equation and also propose a velocity analysis workflow for velocity scanning. The tests to synthetic and field data prove the velocity analysis methods adopted in this paper are robust and valid.