Synthesis, experimental and theoretical NMR study of 2′-hydroxychalcones bearing a nitro substituent on their B ring

The synthesis of several 2′-hydroxynitrochalcones has been accomplished by an aldol reaction of equimolar amounts of the appropriate 2′-hydroxyacetophenones with nitrobenzaldehydes in alkaline medium. The reaction of 2′-hydroxyacetophenones bearing a 6′-methoxy with 2- or 4-nitrobenzaldehydes gave the expected 2′-hydroxynitrochalcones and also 4-methoxynitroaurones, being the latter ones the unique reaction products when using 2 molar equiv of nitrobenzaldehydes. The reaction mechanisms for the formation of both products are discussed. The ¹³C NMR chemical shifts have been discussed first by means of an empirical additive model and then by comparison with GIAO/B3LYP calculated absolute shieldings.     

Carbon-13 NMR spectra of monosubstituted pyrazines

Carbon-13 NMR chemical shifts and one-bond carbon–hydrogen coupling constants have been obtained at 15·09 MHz. The trends in the carbon chemical shifts obtained for the pyrazines parallel those of monosubstituted benzenes and 2-substituted pyridines, except for the direct effect of substitution where the pyrazines resemble pyridines not benzenes. The substituent effects on the ¹³C NMR spectra are generally quite similar to those in the ¹H NMR spectra. The ¹³C NMR spectrum of the tautomeric hydroxypyrazine has been compared with the ¹³C NMR spectra of 2-, 3- and 4-hydroxypyridines. Hydroxy compounds that can exist as a cyclic amide show a large meta substituent effect on the chemical carbon shift.     

Spectroscopic, thermal and structural studies of cocrystal of 2,2′-diamino-4,4′-bis(1,3-thiazole) with 4,4′-bipyridine, 1,2-bis(4-pyridyl)ethylene and 1,3-bis(4-pyridyl)propane

Three new cocrystals based upon 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ) with 4,4′-bipyridine (4,4′-bipy), 1,2-bis(4-pyridyl)ethylene (bpe) and 1,3-bis(4-pyridyl)propane (bpp): [(DABTZ) (4,4′-bipy)], [(DABTZ) (bpe)] and [(DABTZ) (bpp)] have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal and X-ray crystallography. Self-assembly of these compounds in the solid state is likely caused by both hydrogen bonding, and π-π stacking.     

Synthesis and structure of 1-[(3-hydroxybenzo[<Emphasis Type="Italic">b</Emphasis>]thiophen-2-yl)methylidene]-3-oxo-5-phenyl-1-pyrazolidinium-2-ide

Potentially tautomeric azomethine imine, 1-[(3-hydroxybenzo[b]thiophen-2-yl)methylidene]-3-oxo-5-phenyl-1-pyrazolidinium-2-ide has been prepared. According to X-ray diffraction, ¹H, ¹³C, and ¹⁵N NMR and electronic spectroscopy, the compound exists as 3-hydroxybenzothiophene structure containing intermolecular hydrogen bond between the hydroxy group and the carbonyl oxygen of the pyrazolidone ring in crystal state. Quantum chemical calculations predict the possibility of OH and NH tautomeric forms.     

Synthesis and structural investigation of 1′,3′,3′-trimethyl-6-hydroxy-spiro(2H-1-benzopyran-2,2′-indoline), 1′,3′,3′-trimethyl-6-methacryloyloxy-spiro(2H-1-benzopyran-2,2′-indoline) and a copolymer with methyl methacrylate by 1D and 2D NMR spectroscopy

Photo-responsive spiropyran-based compounds, such as, 1′,3′,3′-trimethyl-6-hydroxy-spiro(2H-1-benzopyran-2,2′-indoline) [OHSP], its monomer, such as 1′,3′,3′-trimethyl-6-methacryloyloxy-spiro(2H-1-benzopyran-2,2′-indoline) [MOSP] and its copolymers with methyl methacrylate [MMA] were synthesised using conventional synthetic routes. The copolymerisation was carried out either in tetrahydrofuran [THF] or in toluene using 2,2′-azobisisobutyronitrile [AIBN] as an initiator. The structures of these materials were investigated using ¹H and ¹³C NMR spectroscopy. DEPT-135, HCCOSW and COSY45 NMR experiments were used to assign and interpret the complex structure of spiropyran based materials.     

Reaction of 1-alkyl/aryl-3-amino-1H,3H-quinoline-2,4-diones with urea. Synthetic route to novel 3-(3-acylureido)-2,3-dihydro-1H-indol-2-ones, 4-alkylidene-1′H-spiro[imidazolidine-5,3′-indole]-2,2′-diones, and 3,3a-dihydro-5H-imidazo[4,5-c]quinoline-2,4-diones

1-Substituted 3-alkyl/aryl-3-amino-1H,3H-quinoline-2,4-diones react with urea in boiling acetic acid to give products depending on the type of substitution in position 3 and at the nitrogen atom of the 3-amino group. Starting compounds bearing a primary amino group in position 3 give 3-(3-acylureido)-2,3-dihydro-1H-indol-2-ones. Starting compounds bearing a secondary amino group in position 3 react according to the character of the other substituent in position 3. If there is a hydrogen atom α to the carbon atom C(3), 4-alkylidene-1′H-spiro[imidazolidine-5,3′-indole]-2,2′-diones arise. If a hydrogen atom is not present in this position, the reaction leads to 3,3a-dihydro-5H-imidazo[4,5-c]quinoline-2,4-diones. Reaction mechanisms for these transformations are proposed. All compounds were characterized by their ¹H, ¹³C, IR and atmospheric pressure chemical ionization mass spectra and some of them also by ¹⁵N NMR data.     

Reaction of 1-substituted 3-aminoquinoline-2,4-diones with isothiocyanates. An easy pathway to generate novel 2-thioxo-1′H-spiro[imidazoline-5,3′-indole]-2,2′-diones

3-Butyl-3-amino-1H,3H-quinoline-2,4-diones react with isothiocyanates to give novel 3a-butyl-9b-hydroxy-2-thioxo-1,2,3,3a,5,9b-hexahydro-imidazo[4,5-c]quinolin-2-ones in high yields. These compounds rearrange in boiling acetic acid or concd hydrochloric acid to give (E)- and/or (Z)-4-butylidene-2-thioxo-1′H-spiro[imidazoline-5,3′-indole]-2,2′-diones. All compounds were characterized by their ¹H, ¹³C, IR and MS spectra, and some of them also by ¹⁵N NMR. The structure of one compound was investigated by single-crystal X-ray diffraction.     

1H and 13C NMR study of the enol–enolic tautomerism of some cyclic β-ketoaldehydes

Aldehyde (δCH) and enolic (δOH) proton chemical shifts, the corresponding spin–spin coupling constants (JCH,OH) and the ¹³C chemical shifts (δC) have been measured for three cyclic β-ketoaldehydes as a function of temperature. A tautomeric equilibrium has been shown to exist between the aldo–enol ( A ) and hydroxymethylene ketone ( B ) forms. The chemical shifts δCH δOH and δC for the two pure tautomeric forms A and B have been calculated. The enthalpy changes ΔH in the tautomeric process A ? B and the percentages of the tautomeric forms have been determined.     

Novel four-component route to the synthesis of spiro[indoline-3,4′-pyridine]-3′-carboxylate derivatives

An effective route to spiro[indoline-3,4′-pyridine]-3′-carboxylate derivatives is described. This involves reaction of isatin, 1-phenyl-2-(1,1,1-triphenyl-λ⁵-phosphanylidene)-1-ethanone, and benzylamine derivatives or aliphatic amines in the presence of alkyl acetoacetate (1,3-dicarbonyl compounds) in dry methanol under reflux conditions. The reactive 1:1 enaminone, which is obtained from the addition of the amine to 1,3-dicarbonyl compound, adds to the α,β-unsaturated ketone, which is formed from the reaction of isatin and 1-phenyl-2-(1,1,1-triphenyl-λ⁵-phosphanylidene)-1-ethanone, to produce the alkyl 1′-benzyl-2′-methyl-2-oxo-6′-phenyl-1′H-spiro[indoline-3,4′-pyridine]-3′-carboxylate derivatives in excellent yields.     

Structure and isomerization in 4,4′-biimidazoles: a comparison of crystal structures and theoretical calculations of 2,2′-dimethyl-4,4′-biimidazole and 2,2′-dimethyl-4,4′-biimidazolium bis-trifluoroactate

The crystal structures of the compounds 2,2′-dimethyl-4,4′-biimidazole dihydrate (1) and 2,2′-dimethyl-4,4′-biimidazolium bistrifluoroacetate (2) have been determined. Compound 1 is linked into a three dimensional network via hydrogen bonding between the imidazole nitrogens and the water molecules, while compound 2 forms sheets through hydrogen bonding between the acetate and imidazolium ions. Theoretical calculations for 1 show that the particular prototropic tautomer observed in the crystal structure is not the lowest energy isomer. This observation is justified in terms of hydrogen bonding to the lattice water molecules.     

CIDNP assisted assignment of carbon-13 NMR lines in α-tetralone and α-indanone

The reversible abstraction of hydrogen from benzene-1,3,5-triol by photoexcited α-tetralone or α-indanone in solutions of methanol leads to CIDNP in the ¹³C NMR spectra of these compounds. The information gained from the phase of the polarization in the CIDNP spectra is used to resolve the ambiguities in the assignment of the ¹³C NMR lines for α-indanone and α-tetralone, arising from conflicting literature data. Chemical shifts for both compounds in methanol are reported. 2′-Methylacetophenone does not exhibit CIDNP in the ¹³C spectrum under similar conditions.     

NMR,MP2, and DFT study of thiophenoxyketenimines (o‐thio‐Schiff bases): Determination of the preferred form

Five new thiophenoxyketinimines have been synthesized. ¹H and ¹³C NMR spectra as well as deuterium isotope effects on ¹³C chemical shifts are determined, and spectra are assigned. DFT and MP2 calculations of both structures, chemical shifts, and isotope effects on chemical shifts are done. The combined analysis reveals that the compounds are primarily on a zwitterionic form with an NH⁺ and a S⁻ group and with a little of the neutral form mixed in. Very strong intramolecular hydrogen bonding is found and very high NH chemical shifts are observed. The theoretical calculations show that calculations at the MP2 level are best to obtain correct “C═S” chemical shifts.     

Syntheses and properties of complexes with bis(2,2′-bipyridyl)ruthenium(II) moieties coordinated to 4,4′:2′,2′′:4′′,4′′′-quaterpyridinium ligands

Eleven new complexes of the form cis-[Ru^II(bpy)₂(L^A)]⁴⁺ (bpy = 2,2′-bipyridyl; L^A = a pyridinium-substituted bpy derivative) have been prepared and isolated as their PF₆⁻ salts. Characterisation involved various techniques including ¹H NMR spectroscopy and MALDI mass spectrometry. The UV-Vis spectra show intense intraligand π → π^∗ absorptions and metal-to-ligand charge-transfer (MLCT) bands with two distinct maxima in the visible region. Small shifts in the MLCT bands correlate with the electron-withdrawing strength of the ligand L^A. Cyclic voltammograms show quasi-reversible or reversible Ru^III/II oxidation waves, and two or more ligand-based reductions with varying degrees of reversibility. The variations in the redox potentials correlate with changes in the structure of L^A, and also with the MLCT energies. Differential pulse voltammetry allows the first reduction process for two of the complex salts to be resolved into two peaks. Single-crystal X-ray structures have been solved for three of the new complex salts and also for a pro-ligand salt. Two carboxylate-functionalised compounds have been tested as photosensitizers on TiO₂-coated electrodes, but show only negligible efficiencies, in accord with expectations.     

Highly diastereoselective chemoenzymatic synthesis of (2′R)- and (2′S)-2′-deoxy[2′-H]guanosines

In an effort to develop an efficient synthetic method of highly diastereoselective (2′R)- and (2′S)-2′-deoxy[2′-²H]guanosines, chemoenzymatic conversion was investigated. The synthesis of (2′R > 98% de)-2′-deoxy[2′-²H]guanosine was achieved by biological transdeoxyribosylation using (2′R > 98% de)-2′-deoxy[2′-²H]uridine, 2,6-diaminopurine, and Enterobacter aerogenes AJ-11125, followed by treatment with adenosine deaminase. (2′S > 98% de)-2′-Deoxy[2′-²H]guanosine was synthesized from (2′S > 98% de)-2′-deoxy[2′-²H]uridine and 2,6-diaminopurine using thymidine phosphorylase and purine nucleoside phosphorylase instead of E. aerogenes AJ-11125.     

Excited-state intramolecular proton transfer in 2-(2′,6′-dihydroxyphenyl)benzoxazole: effect of dual hydrogen bonding on the optical properties

2-(2′,6′-Dihydroxyphenyl)benzoxazole (DHBO) has been synthesized by using palladium-catalyzed oxidative cyclization. The compound utilizes both O-H···N and O-H···O bonds to ensure a coplanar structure between the benzoxazole and phenol fragments. Optical comparison with the parent compound 2-(2′-hydroxyphenyl)benzoxazole (HBO) reveals that the dual hydrogen bonding in DHBO plays an essential role in raising the desirable keto emission for ESIPT and tuning the polarity sensitivity toward the molecular environment. DHBO also exhibits a higher quantum yield (?_fl = 0.108 in methanol) than HBO (?_fl = 0.0025) in the same solvent.     

Diastereoselective synthesis of 1-alkyl-2,4,6-trioxoperhydropyrimidine-5-spiro-3′-(1′,2′,3′,4′-tetrahydroquinolines)

Knoevenagel products formed by the condensation of N-monoalkyl barbituric acids with o-tert-amino benzaldehydes undergo tert-amino effect reactions (T-reactions) yielding 1-alkyl-2,4,6-trioxoperhydropyrimidine-5-spiro-3′-(1′,2′,3′,4′-tetrahydroquinoline) derivatives as a mixture of (S^∗,S^∗)- and (S^∗,R^∗)-diastereomers. Mostly, the major diastereomer has the S^∗,S^∗-configuration. According to X-ray diffraction data in the solid form and NOE data in solution, diastereoselectivity of the T-reactions can be associated with the structure of the Knoevenagel products whose conformation is fixed by the strong intramolecular C-H?π interaction.     

13C and 1H NMR investigation of the structure of N″-sulphonyl-N-alkylideneformamidrazones

The ¹³C and ¹H NMR spectra of N″-sulphonyl-N-alkylideneformamidrazones have been recorded and the chemical shifts assigned. The tautomeric structure proved to be an N²- alkylidenehydrazide sulphonylimide. The barrier to rotation around the CN¹ bond was estimated from variable from temperature ¹H NMR measurements, and the Z/E ratio and its solvent dependence was investigated.     

Concise and efficient synthesis of 3′-O-triphosphates of 2′-deoxyadenosine and 2′-deoxycytidine

We describe concise and efficient synthesis of 2′-deoxyadenosine-3′-O-triphosphate (2′-d-3′-ATP) and 2′-deoxycytidine-3′-O-triphosphate (2′-d-3′-CTP) which are well known for their various biological applications. One-pot synthetic methodology was used to convert N⁶-Benzoyl-5′-O-levulinoyl-2′-deoxyadenosine into N⁶-Benzoyl-5′-O-levulinoyl-2′-deoxyadenosine-3′-O-triphosphate in 72% yield. One-step concurrent deprotection of N⁶-Benzoyl and 5′-O-levulinoyl groups using concentrated aqueous ammonia resulted in 2′-d-3′-ATP in 75% yield. The same synthetic strategy was successfully employed to convert N⁴-Benzoyl-5′-O-levulinoyl-2′-deoxycytidine into 2′-d-3′-CTP in 66% yield.     

The artificial binaphthyl amino acid 6-amino-6′-carboxyethyl-2-methoxy-2′-hydroxy-1,1′-binaphthyl (Bna): synthesis and assembly of Bna peptides

The new binaphthyl-based amino acid 6-amino-6′-carboxyethyl-2-methoxy-2′-hydroxy-1,1′-binaphthyl (Bna) is presented, which combines the axially chiral binaphthyl core, a phenolic OH-group as well as terminating amino and carboxyl groups in one structure. The large aromatic rings of the compound provide molecular spacing and π-surface attraction in assembled Bna oligoamides. The synthesis of Bna derivatives is reported, both with the (R)- and with the (S)-binaphthyl skeleton. Several dipeptides of (R)- or (S)-Bna units combined with natural amino acids, were prepared as ‘building blocks’ for the synthesis of extended Bna peptides. The tetrapeptide Boc-(S)-Val-(S)-Bna(OH)-(S)-Val-(S)-Bna(OPiv)-O-n-But (12) and the pentapeptide Boc-(S)-Val-(S)-Bna(OH)-(S)-Val-(S)-Bna(OH)-Gly-OH (13) were prepared via conventional solution phase synthesis and solid phase synthetic techniques, respectively. Compound 12 shows an interesting dynamic ¹H NMR spectrum suggesting compact and aggregated forms in dichloromethane. Compound 13 accelerates the enolisation of acetone. The use of more complex Bna peptides as organo catalysts is proposed.     

Convergent syntheses of carbon-13 labeled midazolam and 1′-hydroxymidazolam

For the purpose of drug interaction studies, the stable-isotope labeled [¹³C₃]midazolam and its metabolite, 1′-hydroxy-[¹³C₃]midazolam were synthesized in four and five steps in overall yields of 25.5% and 14.2%, from 7-chloro-5-(2-fluorophenyl)-2-(N-nitrosomethylamino)-3H-1,4-benzodiazepine, respectively, by a convergent synthesis, in which a key imidazoline ring formation was achieved by the facile reaction of [¹³C]2-aminomethyl-7-chloro-2,3-dihydro-5-(2-fluorophenyl)-1H-1,4-benzodiazepine with varying ethyl imidate hydrochlorides. The scrambling of C-3 and C-4 labeling in intermediate diamine, and consequently in the final products, as well as the formation of a Δ^4,5 isomer of 1′-hydroxy-[¹³C₃]midazolam was observed and explained.