Improved characterization of local seismicity using the Dubai Seismic Network,United Arab Emirates

In April 2006, Dubai Municipality established a broadband seismological network in Dubai Emirate, United Arab Emirates (UAE). This network was the first seismic network in UAE and consists of four remote seismic stations to observe local and regional seismic activity that may have an effect on Dubai Emirate and the surrounding areas. The network exchanges real-time data with the National Center of Meteorology and Seismology in Abu Dhabi, the Earthquake Monitoring Center in Oman and imports in real-time data from few Global Seismic Network stations, which increases the aperture of the network. In April 2012, Dubai Municipality installed an additional five free-field strong motion stations inside the urban area to estimate and publish real-time ShakeMaps for public and decision makers. Although the local seismic activity from April 2006 to June 2013 reflects low seismic activity with the Emirate, it indicates active tectonics in the relatively aseismic northern Oman Mountains region. A few inland clusters of micro-to-small earthquakes have been identified with the new network. A clear cluster of small-to-moderate earthquakes took place in the eastern part of UAE to the east of Masafi, while two clusters of micro-to-small earthquakes took place at Wadi Nazwa and northern Huwaylat. Focal mechanisms of few well recorded earthquakes in this region indicate normal faulting, generally trending NE in parallel to the transition shear zone between the collision at Zagros and the subduction at the Makran zone.     

Assessment of organic pollutants in the offshore sediments of Dubai, United Arab Emirates

Fifteen stations (st) were selected along Dubai coastal region to delineate the distribution and the source of total petroleum hydrocarbon (TPH), total organic carbon (TOC), total Kjeldhal nitrogen (TKN), polycyclic aromatic hydrocarbon (PAHs) and polychlorinated biphenyls. The concentrations of TPH fluctuated between 2 μg g ⁻¹ and 48018 μg g ⁻¹ and the values of TOC were in the range of 0.16–5.9 wt%, while TPAHs ranged from 0.09 μg g ⁻¹ to 161.72 μg g ⁻¹. On the other hand, TPCBs showed values between 0.8 μg kg⁻¹ and 93.3 μg kg⁻¹ and TKN values varied from 218 μg g⁻¹ to 2457 μg g ⁻¹. Distribution of oil and organic compounds in Dubai sediments are safe compared with previous studies except for limited areas at the northeastern offshore. These readings are probably due to: (1) presence of commercial or industrial ports, dry docks and fishing harbours and (2) population centers mainly concentrated at the northern part of the study area. Results indicate that TOC can be used as indicator of oil pollution only in heavily oiled sediments. The highest values of TOC, TPH, TPAHs and TPCBs corresponded to the stations covered with fine sand, due to adsorption properties and larger surface area. The evaporation of low boiling point compounds from surface layers led to enrichment of sediments with the thick residual. Al-Hamriya St 3 exhibited the highest values of TPH, TOC, TPAHs and TPCBs and the second highest value of TKN.     

Hydrology of the coastal sabkhas of Abu Dhabi, United Arab Emirates

Water fluxes were estimated and a water budget developed for the land surface and a surficial 10-m-deep section of the coastal sabkhas that extend from the city of Abu Dhabi, United Arab Emirates, west to the border with Saudi Arabia. The fluxes were estimated on the basis of water levels and hydraulic conductivities measured in wells and evaporation rates measured with a humidity chamber. In contrast with conceptual models proposed in earlier studies, groundwater inflow is estimated to be small, whereas the largest components of the water budget are recharge from rainfall and evaporation from the water table. Estimates within a rectilinear volume of sabkha, defined as 1 m wide by 10 km long by 10 m deep, indicate that about 1 m³/year of water enters and exits by lateral groundwater flow; 40–50 m³/year enters by upward leakage; and 640 m³/year enters by recharge from rainfall. Based on the water and solute fluxes estimated for the upward leakage into the sabkha, 7–8 pore volumes of brine have entered the sabkha from below since the time the sabkha became saturated (7,000 years ago) as a result of the last global sea-level rise.

Compaction characteristics of granular soils in United Arab Emirates

Most of the topsoils encountered in United Arab Emirates and in the Arabian Peninsula are granular soils with small percentages of silt and clay. Determination of the compaction characteristics of such soils is an essential task in preparing for construction work. The accumulating experience over many years of soil testing in our laboratories suggested that there exists an underlying trend that governs the compaction characteristics of such soils. As such, a study was undertaken to assess the compaction characteristics of such soils and to develop the governing predictive equations. For the purposes of this study, 311 soil samples were collected from various locations in the United Arab Emirates, and tested for various including grain-size distribution, liquid limit, plasticity index, specific gravity of soil solids, maximum dry density of compaction, and optimum moisture content following ASTM D 1557-91 standard procedure C. Following the development of the predictive equations, a new set of 43 soil samples were collected and their compaction results were used to test the validity of predictive model. The range of variables for these soils were as follows: percent retained on US sieve #4 (R#4): 0–68; Percent passing US sieve #200 (P#200): 1–26; Liquid limit: 0–56; Plasticity index: 0–28; Specific gravity of soil solids: 2.55–2.8. Based on the compaction tests results, multiple regression analyses were conducted to develop mathematical models and nomographic solutions to predict the compaction properties of soils. The results indicated that the nomographs could predict well the maximum dry density within ±5% confidence interval and the optimum moisture content within ±3%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Major and trace element geochemistry in upper Ganga river in the Himalayas, India

Chemical weathering and resulting water compositions in the upper Ganga river in the Himalayas were studied. For the first time, temporal and spatial sampling for a 1 year period (monthly intervals) was carried out and analyzed for dissolved major elements, trace elements, Rare Earth Elements (REE), and strontium isotopic compositions. Amounts of physical and chemical loads show large seasonal variations and the overall physical load dominates over chemical load by a factor of more than three. The dominant physical weathering is also reflected in high quartz and illite/mica contents in suspended sediments. Large seasonal variations also occur in major elemental concentrations. The water type is categorized as HCO₃^––SO₄^2––Ca²⁺ dominant, which constitute >60% of the total water composition. On an average, only about 5–12% of HCO₃^– is derived from silicate lithology, indicating the predominance of carbonate lithology in water chemistry in the head waters of the Ganga river. More than 80% Na⁺ and K⁺ are derived from silicate lithology. The silicate lithology is responsible for the release of low Sr with extremely radiogenic Sr (⁸⁷Sr/⁸⁶ Sr>0.75) in Bhagirathi at Devprayag. However, there is evidence for other end-member lithologies for Sr other than carbonate and silicate lithology. Trace elements concentrations do not indicate any pollution, although presence of arsenic could be a cause for concern. High uranium mobilization from silicate rocks is also observed. The REE is much less compared to other major world rivers such as the Amazon, perhaps because in the present study, only samples filtered through <0.2 m were analysed. Negative Eu anomalies in suspended sediments is due to the excess carbonate rock weathering in the source area.     

Dolomite formation within microbial mats in the coastal sabkha of Abu Dhabi (United Arab Emirates)

Microbial mediation is the only demonstrated mechanism to precipitate dolomite under Earth surface conditions. A link between microbial activity and dolomite formation in the sabkha of Abu Dhabi has, until now, not been evaluated, even though this environment is cited frequently as the type analogue for many ancient evaporitic sequences. Such an evaluation is the purpose of this study, which is based on a geochemical and petrographic investigation of three sites located on the coastal sabkha of Abu Dhabi, along a transect from the intertidal to the supratidal zone. This investigation revealed a close association between microbial mats and dolomite, suggesting that microbes are involved in the mineralization process. Observations using scanning electron microscopy equipped with a cryotransfer system indicate that authigenic dolomite precipitates within the exopolymeric substances constituting the microbial mats. In current models, microbial dolomite precipitation is linked to an active microbial activity that sustains high pH and alkalinity and decreased sulphate concentrations in pore waters. Such models can be applied to the sabkha environment to explain dolomite formation within microbial mats present at the surface of the intertidal zone. By contrast, these models cannot be applied to the supratidal zone, where abundant dolomite is present within buried mats that no longer show signs of intensive microbial activity. As no abiotic mechanism is known to form dolomite at Earth surface conditions, two different hypotheses can reconcile this result. In a first scenario, all of the dolomite present in the supratidal zone formed in the past, when the mats were active at the surface. In a second scenario, dolomite formation continues within the buried and inactive mats. In order to explain dolomite formation in the absence of active microbial metabolisms, a revised microbial model is proposed in which the mineral‐template properties of exopolymeric substances play a crucial role.     

Early Maastrichtian larger foraminifera of the Qahlah Formation, United Arab Emirates and Sultanate of Oman border region

The Early Maastrichtian (Late Cretaceous) Qahlah Formation is the oldest stratigraphical unit lying upon the eroded top of the obducted Semail Ophiolite, of Santonian–Campanian age, in the Northern Oman Mountains. It crops out as a series of low hills on the western flank of the mountains, which are located along the boundary between the United Arab Emirates and the Sultanate of Oman. This paper presents the results of an investigation into the bio- and lithofacies of the Qahlah Formation in the Jabal Huwayyah section (at the boundary between the Al Ain area of the United Arab Emirates and the Buraimi area of Oman). The data collected were used to determine the age and depositional environment of the rock unit studied. In addition, the section is lithostratigraphically correlated with other sections in the study area. Microfossils from Jabal Huwayyah are represented mainly by the larger benthic foraminifera Loftusia elongata, L. morgani, Pseudorbitolina marthae, Orbitoides media, Omphalocyclus macroporus and Lepidorbitoides minor. These foraminifera are reported for the first time from this section. The diversity and abundance of fauna, particularly within the calcareous siltstone bed near the top of the formation (unique to the Huwayyah area), reflect a shallow marine depositional environment.     

Scenarios of Seismic Risk in the United Arab Emirates,an Approximate Estimate

We estimate the losses due to 10 scenario earthquakes in 150 settlements of the United Arab Emirates (UAE). For southern Iran, we use four source zones and the maximum magnitudes in them as determined by GSHAP (7.2 M 8.1). For six local scenario earthquakes, we use the range 5.5 M 6.5, place the sources mainly on mapped faults and vary the distance to major cities from 10 to 60 km. In the test case of the Masafi earthquake (M5, 11 March 2002), the method and data bank we use yield the correct results, suggesting that our approach to the problem is valid for the UAE. The sources in Iran are expected to cause only minor damage, except for an M8.1 earthquake in the Makran region. For such an event we expect some deaths, several hundred injured and a loss of 3–6% of the value to the building stock in the northeastern UAE, including Oman. The losses for local scenarios with epicenters in the unpopulated areas of the UAE and for scenarios with M < 5.8 are estimated to be minor. Because the two major mapped faults run through several of the large cities, scenarios with short epicentral distances from cities have to be considered. Scenarios with M6 near cities lead to estimates of about 1000 ± 500 deaths, and several thousand injured. Most buildings are expected to be damaged to a moderate degree and the loss to buildings is estimated around 1/4of their value. If the magnitude should reach 6.5, the losses to humans and to building value could be staggering. These estimates are approximate because: (1) there exists no local seismograph network that could map active faults by locating microseismicity; (2) there exist no historically old buildings that could serve as tests for effects due to strong ground motion in the past; (3) there exist no microzonation of the subsurface properties in this region of unconsolidated building ground; (4) there exist no detailed inventory of building fragility. Nevertheless, our conclusion that there exists a substantial seismic risk in the UAE is reliable, because our method yields accurate results in the cases of earthquakes with known losses during the last several decades in the Middle East.     

Spectroscopic characterization of geological materials from the United Arab Emirates

Throughout the United Arab Emirates, the sand differs in color and composition, depending on its source. This study reports the collection of 70 sediment samples from coastal district areas of seven emirates in the United Arab Emirates, namely, Abu Dhabi, Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al-Khaimah, and Fujairah for the purposes of spectroscopic characterization and color justification. The compositions of these naturally occurring sand samples obtained were tested using different spectroscopic techniques. The techniques included both destructive instrumentation as scanning electron microscopy with energy dispersive X-ray analysis and X-ray powder diffraction and nondestructive instrumentation as confocal Raman microscopy. It was concluded that the sand can acquire various colors ranging from white to black due to the presence of certain chemical compounds.     

Mobilization and redistribution of major and trace elements in two weathering profiles developed on serpentinites in the Lomié ultramafic complex, South-East Cameroon

The behaviour of major and trace elements have been studied along two serpentinite weathering profiles located in the Kongo-Nkamouna and Mang North sites of the Lomié ultramafic complex.The serpentinites are characterized by high SiO₂ and MgO contents, very low trace, rare earth and platinum-group element contents. Lanthanide and PGE contents are higher in the Nkamouna sample than in Mang North. Normalized REE patterns according to the CI chondrites reveal that: (i) all REE are below chondrites abundances in the Mang North sample; (ii) the (La/Yb)_N ratio value is higher in the Nkamouna sample (23.72) than in the Mang one (1.78), this confirms the slightly more weathered nature of the Nkamouna sample. Normalized PGE patterns according to the same CI chondrites reveal a negative Pt anomaly in the Mang sample. The Nkamouna sample is characterized by a flat normalized PGE pattern.All element contents increase highly from the parent rock to the coarse saprolite.In the weathering profiles, Fe₂O₃ contents decrease from the bottom to the top contrarily to Al₂O₃, SiO₂ and TiO₂. The contents of alkali and alkaline oxides are under detection limit.Concerning trace elements, Cr, Ni, Co, Cu, Zn and Sc decrease considerably from the bottom to the top while Zr, Th, U, Be, Sb, Sn, W, Ta, Sr, Rb, Hf, Y, Li, Ga, Nb and Pb increase towards the clayey surface soil. Chromium, Ni and Co contents are high in the weathered materials in particular in the saprolite zone and in the nodules.REE contents are high in the weathered materials, particularly in Nkamouna. Their concentrations decrease along both profiles. Light REE are more abundant than heavy REE. Normalized REE patterns according to the parent rock reveal positive Ce anomalies in all the weathered materials and negative Eu anomalies only at the bottom of the coarse saprolite (Nkamouna site). Positive Ce anomalies are higher in the nodular horizon of both profiles. An additional calculation method of lanthanide anomalies, using NASC data, confirms positive Ce anomalies ([Ce/Ce^*]_NASC = 1.15 to 60.68) in several weathered materials except in nodules ([Ce/Ce^*]_NASC = 0.76) of the upper nodular horizon (Nkamouna profile). The (La/Yb)_N ratios values are lower in the Nkamouna profile than in Mang site.PGE are more abundant in the weathered materials than in the parent rock. The highest contents are obtained in the coarse saprolite and in the nodules. The elements with high contents along both profiles are Pt (63–70 ppb), Ru (49–52 ppb) and Ir (41 ppb). Normalized PGE patterns show positive Pt anomalies and negative Ru anomalies.The mass balance evaluation, using thorium as immobile element, reveals that:

– major elements have been depleted along the weathering profile, except for Fe, Mn and Ti that have been enriched even only in the coarse saprolite;

– all the trace elements have been depleted along both profiles, except for Cr, Co, Zn, Sc, Cu, Ba, Y, Ga, U and Nb that have been enriched in the coarse saprolite;

– rare earth elements have been abundantly accumulated in the coarse saprolite, before their depletion towards the top of the profiles;

– platinum-group elements have been abundantly accumulated in the coarse saprolite but have been depleted towards the clayey surface soil.

Moreover, from a pedogenetical point of view, this study shows that the weathering profiles are autochtonous, except in the upper part of the soils where some allochtonous materials are revealed by the presence of zircon grains.     

Experimental investigation of limestone of the Faiyah Range area,United Arab Emirates

The paper presents results of a laboratory experimental program performed on limestone rock samples, using both physical and mechanical methods. The studied rocks (Simsima Formation, Upper Cretaceous) can be classified as highly ferruginous and highly fossilliferous limestone. The lower part of the Simsima Formation contains common fauna such as Orbittoids, rhodolithic and rudists, whereas the upper part of the limestone is interbedded with conglomerates. Detailed geological, petrographic in addition to physical and mechanical tests were carried out on some representative samples from the Faiyah area, aiming at getting a better understanding of the important properties of these rocks. It is shown that the uniaxial unconfined compressive stress is the controlling factor of classification of the Faiyah limestone.     

Iron colloids/organic matter associated transport of major and trace elements in small boreal rivers and their estuaries (NW Russia)

The chemical status of major and trace elements (TE) in various boreal small rivers and watershed has been investigated along a 1500-km transect of NW Russia. Samples were filtered in the field through a progressively decreasing pore size (5, 0.8 and 0.22 μm; 100, 10, and 1 kD) using a frontal filtration technique. All major and trace elements and organic carbon (OC) were measured in filtrates and ultrafiltrates. Most rivers exhibit high concentration of dissolved iron (0.2–4 mg/l), OC (10–30 mg/l) and significant amounts of trace elements usually considered as immobile in weathering processes (Ti, Zr, Th, Al, Ga, Y, REE, V, Pb). In (ultra)filtrates, Fe and OC are poorly correlated: iron concentration gradually decreases upon filtration from 5 μm to 1 kD whereas the major part of OC is concentrated in the <1–10 kD fraction. This reveals the presence of two pools of colloids composed of organic-rich and Fe-rich particles. According to their behavior during filtration and association with these two types of colloids, three groups of elements can be distinguished: (i) species that are not affected by ultrafiltration and are present in the form of true dissolved inorganic species (Ca, Mg, Li, Na, K, Sr, Ba, Rb, Cs, Si, B, As, Sb, Mo) or weak organic complexes (Ca, Mg, Sr, Ba), (ii) elements present in the fraction smaller than 1–10 kD prone to form inorganic or organic complexes (Mn, Co, Ni, Zn, Cu, Cd, and, for some rivers, Pb, Cr, Y, HREE, U), and (iii) elements strongly associated with colloidal iron in all ultrafiltrates (P, Al, Ga, REE, Pb, V, Cr, W, Ti, Ge, Zr, Th, U). Based on size fractionation results and taking into account the nominal pore size for membranes, an estimation of the effective surface area of Fe colloids was performed. Although the total amount of available surface sites on iron colloids (i.e., 1–10 μM) is enough to accommodate the nanomolar concentrations of dissolved trace elements, very poor correlation between TE and surface sites concentrations was observed in filtrates and ultrafiltrates. This strongly suggests a preferential transport of TE as coprecipitates with iron oxy(hydr)oxides. These colloids can be formed on redox boundaries by precipitation of Fe(III) from inflowing Fe(II)/TE-rich anoxic ground waters when they meet well-oxygenated surface waters. Dissolved organic matter stabilizes these colloids and prevents their aggregation and coagulation. Estuarine behavior of several trace elements was studied for two small iron- and organic-rich rivers. While Si, Sr, Ba, Rb, and Cs show a clear conservative behavior during mixing of freshwaters with the White sea, Al, Pb and REE are scavenged with iron during coagulation of Fe hydroxide colloids.     

Phytolith analysis from the archaeological site of Kush, Ras al-Khaimah, United Arab Emirates

Despite the wealth of archaeological sites and excellent conditions for preservation, few phytolith investigations have been undertaken from the Arabian Gulf region. The results from the Sasanian and Islamic archaeological tell of Kush, Ras al-Khaimah, United Arab Emirates, are presented. Kush is situated just inside the Gulf on an important trade route. The occupation sequence dates from the 4^th century A.D. until the 13^th century A.D., recording the development of the site in the Sasanian period, followed by the arrival of Islam in the 7^th century A.D. and the final abandonment of the site in the late 13^th century when the nearby site of al-Mataf (Julfar) began to develop closer to the present day coastline. All the samples analyzed contained abundant phytoliths (short cells, elongated cells, and groups of elongated cells) of various types. They included date palm (Phoenix dactylifera), papillae (possibly from barley (Hordeum)), and hair cells possibly from species of canary grass (Phalaris spp.). Some researchers have suggested that groups of elongated cells may indicate the presence of irrigation in semiarid environments. The present results for this class of phytoliths appeared to imply that intensive irrigation was unlikely to have taken place around Kush.     

Source parameters of March 10 and September 13, 2007, United Arab Emirates earthquakes

On March 10 and September 13, 2007 two earthquakes with moment magnitudes 3.66 and 3.94, respectively, occurred in the eastern part of the United Arab Emirates (UAE). The two events were widely felt in the northern Emirates and Oman and were accompanied by a few aftershocks. Ground motions from these events were well recorded by the broadband stations of Dubai (UAE) and Oman seismological networks and provide an excellent opportunity to study the tectonic process and present day stress field acting in this area. In this study, we report the focal mechanisms of the two main shocks by two methods: first motion polarities and regional waveform moment tensor inversion. Our results indicate nearly pure normal faulting mechanisms with a slight strike slip component. We associated the fault plane trending NNE–SSW with a suggested fault along the extension of the faults bounded Bani Hamid area. The seismicity distribution between two earthquake sequences reveals a noticeable gap that may be a site of a future event. The source parameters (seismic moment, moment magnitude, fault radius, stress drop and displacement across the fault) were also estimated from displacement spectra. The moment magnitudes were very consistent with waveform inversion. The recent deployment of seismic networks in Dubai and Oman reveals tectonic activity in the northern Oman Mountains that was previously unknown. Continued observation and analysis will allow for characterization of seismicity and assessment of seismic hazard in the region.     

Complex impact assessment of coastal development in the United Arab Emirates using GIS: a case study of Wurayah Biosphere Reserve

Wadi Wurayah area is one of the major wadis originating and running on the Oman Mountains and drains into the Oman Gulf. These wadis in general and Wadi Wurayah in particular are characterized with a rich diversity of rare and mountainous and freshwater habitats and species. These wadis contain unequal, representative, and sensitive areas of the dry lands ecosystem with natural, outstanding landscapes and cultural heritage, while the socioeconomic situation indicates that it has enough socioeconomic infrastructures to develop new alternatives ecologically and economically sustainable. As most of the United Arab Emirates and the region, the study area is undergoing dramatic changes linked to economic diversification and promotion of tourism. Established under the UNESCO’s Man and the Biosphere Program, Wurayah Biosphere Reserve represents protected areas intended to demonstrate well-balanced relationship between conservation of biodiversity and an appropriate local development. The main objectives of this study are to develop an environmental information system to understand the dynamics of human activities associated to land use in the study area, highlight the threats to the environment, educate people about the basic environmental issues and positive traditional practices, and promote tourism. Based on the gained results, the concept of biosphere reserve as a model is to implement ideas of sustainable land use in practice.     

Geochemical factors controlling accumulation of major and trace elements in Greenland coastal and fjord sediments

 The major (Al, Ti, Ca, Mg, Fe, Mn, Si) and trace element (Cd, Cr, Cu, Hg, Li, Ni, Pb, V, Zn) concentrations in surficial (<20 cm) sediments from fjords and open coastal waters around Greenland have been determined. Regionally, high concentrations of Fe, Ti, Mg, Cr, Cu, Ni, and V occur in some west and east coast sediments, but they appear to be natural in origin, as there is no indication of anthropogenic influence. Chemical partition indicates that most of the heavy metals are structurally bound in various silicate, oxide, and sulfide minerals. These host minerals occur more or less equally in the coarse and fine sediment fractions (material >63 μm and <63 μm) and have accumulated at the same rate as other detrital clastic material. Provenance and glaciomarine deposition are the main factors controlling the abundance and distribution of the major and trace elements. The chemical composition reflects the mineralogical differences in the provenance of glacial marine material deposited by water and ice adjacent to Greenland. The main source of the sediments enriched in Ti, Fe, Mg, Cr, Cu, Ni, and V appears to be material derived from the volcanic rocks of the Mesozoic-Tertiary Provinces of Greenland by glacial erosion. Received: 26 June 1995 · Accepted: 11 August 1995     

Estimation of compressional seismic wave attenuation of carbonate rocks in Abu Dhabi,United Arab Emirates

The subsurface geology of Abu Dhabi in the United Arab Emirates is primarily composed of carbonate rocks. Such media are known to be highly heterogeneous. Very few studies have attempted to estimate attenuation in carbonate rocks. In Abu Dhabi no attenuation profile has been published. This study provides the first seismic wave attenuation profiles in Abu Dhabi using dense array of VSP data. We estimated three attenuation profiles: the apparent, the scattering, and the intrinsic attenuations. The apparent attenuation profile was computed using amplitude decay and spectral-ratio methods. The scattering attenuation profile was estimated using a generalized reflection–transmission matrix forward model. It is usually estimated from the sonic log, but to be more consistent with the apparent attenuation, we succeeded in this paper to estimate it from the VSP data. We subtracted the scattering attenuation from the apparent attenuation to deduce the intrinsic attenuation. The results of the study indicate that the scattering attenuation is significant compared to the published studies that are mainly based on clastic rocks. The high scattering attenuation can reach up to 0.02. It can be explained by the strong heterogeneity of the carbonate rocks. This study demonstrates that the Simsima and Rus Formations have considerable scattering and intrinsic attenuations. These formations are considered aquifers in Abu Dhabi; we therefore interpreted this high intrinsic attenuation zones to be due to the heterogeneity and to the fluids contained in these formations. The Umm-Er-Radhuma Formation is a more homogenous formation with limited aquifer potential. Hence, scattering and intrinsic attenuations of the Umm-Er-Radhuma Formation are low.