Determination of trace elements in Antarctic krill samples by inductively coupled atomic emission and graphite furnace atomic absorption spectrometry

Analytical methods were developed for the determination of trace elements in Antarctic krill samples applying inductively coupled plasma atomic emission spectrometry (ICP-AES) and graphite furnace atomic absorption spectrometry (GF-AAS). Cu, Fe, Mn and Zn were determined by ICP-AES, while Cd and Pb by GF-AAS technique. Two microwave assisted digestion procedures were elaborated for the preparation of 0.5-g krill samples using open and closed vessel systems. The efficiency of the digestion processes was checked by measurements of the total organic carbon content of the solutions obtained. The deviations of the analytical data from the certified values and the relative standard deviations of the concentration measurements were lower for all six elements investigated applying the closed vessel digestion system.     

Trends in sorption preconcentration combined with noble metal determination.

Nowadays much attention is being paid to the determination of trace amounts of noble metals in geological, industrial, biological and environmental samples. The most promising techniques, such as inductively coupled plasma atomic emission spectrometry (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS) and electrothermal atomic absorption spectrometry (ETAAS) are characterized by high sensitivity. However, the accurate determination of trace noble metals has been limited by numerous interferences generated from the presence of matrix elements. To decrease, or eliminate, these interferences, the sorption preconcentration of noble metals is often used prior to their instrumental detection. A great number of hyphenated methods of noble metal determination using sorption preconcentration have been developed. This review describes the basic types of available sorbents, preconcentration procedures and preparations of the sorbent to the subsequent determination of noble metals. The specific features of instrumental techniques and examples of ETAAS, FAAS, ICP-AES, ICP-MS determinations after the sorption preconcentration of noble metals are considered. The references cited here were selected mostly from the period 1996 - 2006.     

Slurry sampling for direct analysis of solid materials by electrothermal atomic absorption spectrometry (ETAAS). A literature review from 1990 to 2000

The determination of trace metals in solid samples has traditionally been performed by acid digestion and subsequent measurement by a suitable instrumental technique. This dissolution step is time-consuming and it shows important drawbacks. For these reasons, in the past years many efforts have been focused on the direct analysis of solid samples. Among the developed methodologies, slurry sampling-electrothermal atomic absorption spectrometry combines the significant advantages of the solid and liquid sampling methods, and it can be already considered as a mature technique, that is widely utilized for metal determination in both organic and inorganic matrices, even for routine analysis. Accordingly, this work gives a retrospective view of the progresses of this technique during the past decade (1990-2000).     

Chemical analysis of vanadium pentoxide catalysts

Reliable procedures are described for the analysis of alkali metal sulphate-promoted vanadium pentoxide catalysts supported on silica gel. Vanadium and alkali metals are determined by flame atomic absorption spectrometry in suitable dilutions of solutions obtained by digestion with sulphuric and hydrofluoric acids. “Free acidity” is determined by dissolution of the samples in alkali and back-titration with acid ; corrections for V₂0₅ acidity are included. Relative standard deviations are about 2.5% for metal contents of3–5%($\text{w}\text{w}$).     

Sample digestion methods for the determination of traces of precious metals by spectrometric techniques.

Recent advances in digestion methods used in the analysis of precious metal samples by spectrometric techniques are reviewed. The applicability of a fire assay, a wet acid treatment, chlorination and alkaline oxidizing fusion to a quantitative recovery of metals from various materials is discussed. Data on the precious metal contents obtained by using particular digestion methods as well as UV-VIS spectrophotometry, atomic absorption spectrometry, atomic emission spectrometry and inductively coupled plasma mass spectrometry in the examination of various samples are tabulated.     

Preconcentration of trace elements in potable liquids by means of a liquid membrane emulsion for flame atomic absorption determination

Summary A liquid membrane emulsion was developed for the simultaneous extraction and preconcentration of traces of Cd, Co, Cu, Fe, Mn, Ni, Pb and Zn in potable liquids. After preconcentration, the eight elements were determined by flame atomic absorption spectrometry (FAAS). The results of analyses of potable water, beer and soft drinks, each from five or six different sources are listed. Data from the preconcentration method were compared with corresponding data obtained from the direct determination of the elements by graphite furnace atomic absorption spectrometry (GFAAS). Differences in results for trace elements between the liquid membrane emulsion-FAAS method and the GFAAS method were in the ranges of ±10% (water), ±9% (beer) and ±14% (soft drinks) for most of the trace elements. The satisfactory agreement meant that analyses of such liquids for trace elements can be carried out accurately with less expensive and widely available FAAS equipment.     

Determination of trace metals in estuarine sediments by graphite-furnace atomic absorption spectrometry

A simple and rapid acid digestion method for the decomposition of estuarine sediments is described. Quantitative recovery of Cd, Pb, Cu, Ni, Co, Be and Co is demonstrated. Sensitive, precise and accurate determination of these trace metals by graphite-furnace atomic absorption spectrometry in combination with the L'vov Platform provides an interference-free technique that permits calibration with simple aqueous solutions of metal standards. The accuracy of the method has been confirmed by analysis of two marine sediment reference materials, MESS-1 and BCSS-1.     

Determination of copper, nickel, zinc, cobalt and manganese in seawater by chelation ion chromatography

Preconcentration and determination of trace elements in seawater by chelation ion chromatography (CIC) was studied. For the retention of metal ions (0.25–0.30 M), ammonium acetate (at pH 4.8–5.1) and macroporous iminodiacetate chelating resin were used. This system (CIC) permits trace and ultra-trace determination of metals in a variety of complex matrices, in particular those with a high content of alkali and alkaline earth metals. Detection limits range from 0.1 to 0.5 ng. Satisfactory results are obtained in the range 0.05–0.5 μg/1 when 60 ml of sample are preconcentrated. In this work the contents of zinc, copper, nickel, cobalt and manganese in seawater from the Venice lagoon are presented. The results obtained by chelation ion chromatography are compared with those obtained using preconcentration of metals with dithizone and ammonium pyrrolidinedithiocarbamate in chloroform and analysed by graphite furnace atomic absorption spectrometry.     

Rapid Procedure to Determine Wear Metals in Lubricating Oils and the Analysis of Variance in the Evaluation of Sample Preparation Procedures

 A new sample treatment is proposed based on a partial wet digestion in closed reactors assisted by microwaves for wear metal determinations by flame atomic absorption spectrometry (FAAS). It is rapid, precise and sensitive and allows the use of inorganic standards. Problems concerning solubility have been overcome with mixed solvents. The repeatability, stability, calibration curve and limit of detection were established. Six samples, with different degree of wear were analyzed for Fe, Cu, Pb and Cr by FAAS using the procedure proposed and other sample treatment procedures from the literature. Pb and Cr were not found in all samples. The one-way analysis of variance for Fe applied to each sample confirms the need of an acid attack and the importance of HCl for the digestion. The results obtained for Cu led us to use a two-way analysis of variance for all the samples considering the preparation procedures and the samples as variation sources. It showed no significant differences for the preparation procedures used. Therefore, treatments implying the use of acids are recommended when several wear metals are analyzed. On the other hand, the differences between the simple dilution and the procedures, implying the dissolution of metallic particles is an index to predict an imminent engine failure. Received March 1, 2001. Revision July 10, 2001.     

Flow injection flame atomic absorption determination of Cu, Mn and Zn partitioning in seawater by on-line room temperature sonolysis and minicolumn chelating resin methodology

A flow-injection system is developed for Cu, Mn and Zn partitioning in seawater by flame atomic absorption spectrometry. The first approach is where the trace metal species are fractionated in situ, but analysis is performed by using a flow injection manifold in the laboratory. This operational mode is used for the determination of the dissolved labile metallic fraction and is based on the elution of this fraction from a minicolumn packed with a chelating resin containing iminodiacetic acid groups (Serdolit Chelite Che) loaded in situ with the sample. The second is used for the determination of total dissolved concentrations of trace metals. This last mode is based on the retention/preconcentration of total dissolved metals on the chelating resin after on-line sonolysis of seawater samples acidified with diluted nitric acid to breakdown the metal-organic matter complexes. The figures of merit for Cu, Mn and Zn determinations in both fractions are given and the obtained values are discussed. The fractionation scheme is applied to the analysis of coastal seawater samples collected in Galicia (Northwest, Spain). The results of fractionation showed that Mn and Zn are mainly in the labile fraction, while Cu was mainly present in the organic fraction.     

A rapid high-performance analytical procedure with simultaneous voltammetric determination of toxic trace metals in urine

For the monitoring of toxic trace metals in urine a new high-performance trace analytical procedure with simultaneous voltammetric determination is presented. Particular emphasis has been placed on minimizing contamination by reducing the urine sample volume to 1 ml and consequently limiting the needed amount of HNO(3)/HClO(4) and the duration (<20 min) of the wet digestion stage. The procedure consists of three stages. First 20 urine samples (1 ml each) are simultaneously freeze-dried overnight. They then require only a short wet digestion (HClO(4)/HNO(3) 2:1, 20 min, 210 degrees ). They are then adjusted to pH 4.5 with acetate buffer and the trace metals are determined simultaneously by differential pulse anodic-stripping voltammetry at the mercury film electrode, the quartz digestion vessel being used as the voltammetric cell. If precipitates occur in the acidified samples, their trace metal content can be determined in the same manner, avoiding the low results commonly obtained by other methods. The procedure has high sensitivity with fair to good precision, covers a determination range from the sub-mug/l. to the medium mug/l. level and lends itself to automation. It is cheaper and more accurate than atomic absorption. Thus the procedure provides important potentialities for surveillance of occupationally exposed persons as well as for extended ecotoxicological baseline studies in man and cattle.     

测定土壤中重金属元素时前处理方法的改进

建立了一种微波消解前处理技术的半消解法消解样品,采用原子吸收光谱法和原子荧光光谱法同时测定土壤中主要重金属元素铜、锌、镉、砷、汞的方法,检测土壤标准物质GSS-3、GSS-5、GSS-20,结果显示测定均值在标准差允许范围内,相对标准偏差小于8.5%(n=4),是土壤重金属元素快速检测的可选方法。     

Determination of Metals in Olive Oil by Electrothermal Atomic Absorption Spectrometry: Validation and Uncertainty Measurements

The determination of trace metals in organic matrices is still highly demanding despite improvements in analytical instrumentation. The present study was undertaken in order to evaluate electrothermal atomic absorption spectrometry for the determination of cadmium, copper, iron, lead, and nickel in olive oil. A variety of approaches were used. The most suitable digestion procedure was heating the samples at 300°C for 24 hours and ashing in a muffle furnace at 450°C for 16 hours. The validation data were detection limits of 0.2–153 ng g^?1; mean trueness on certified reference materials of 81–94%; mean recovery on spikes of 90–120%; and repeatability of 12–53%. The combined relative uncertainty was 0.298–0.766. Oils processed by pressing had higher copper, iron, and lead concentrations than oils processed by centrifugation. The reported method provides an efficient way for monitoring trace metal content during olive oil production.     

Determination of terbium and dysprosium by atomic absorption spectrometry

For the determination of terbium and dysprosium by atomic absorption spectrometry, the effects of several inorganic acids, metal ions and alcohols were studied. The two metals were determined in the presence of yttria and in rareearth oxides with satisfactory results.     

A comparative study of standards for determinations of trace wear metals in jet engine oils

The feasibility of using acid-treated metal powder standards for the determination of trace wear metals in spent jet engine oils is evaluated. The addition of 2:3:3 (v/v/v) HF—HCl—HNO₃ mixture to used lubricating oils did not cause any statistically reliable differences from results obtained with organometallic standards. Two sets of six correlation samples, one set being acid-treated, were analyzed for Cu, Cr, Mg, Fe, Mo and V by flame atomic absorption and flame atomic fluorescence spectrometry against each set of standards.     

Continuous sonoassisted digestion coupled to flow injection minicolumn separation for the determination of total and labile Cu and Fe in fresh waters by flame atomic absorption spectrometry

An automatic on-line system is developed for the trace determination of copper and iron species in fresh waters by flame atomic absorption spectrometry using only 5 and 2?mL of sample, for copper and iron determination, respectively. This system, which includes a home-made minicolumn of commercially available resin containing aminomethylphosphonic acid functional groups (Chelite P), comprises two operational modes. The first, used for the determination of the dissolved labile fraction (free copper and iron ions and their weak complexes) is based on the elution of this fraction from a minicolumn containing the chelating resin loaded in-situ with the sample. The second mode is used for the determination of total trace copper and iron concentrations. This last mode is based on the retention/preconcentration of total metals on the Chelite P resin after on-line sonoassisted digestion of water samples acidified with nitric acid (0.5?mol?L^?1 final concentration) to break down metal organic complexes present in fresh waters as river waters. The figures of merit for copper and iron determination in both fractions are given and the obtained values are discussed. The analytical method was characterized and the limit of detection and limit of quantification for the two metals were 0.5 and 1.6?µg?L^?1 for Cu and 2.3 and 6.1?µg?L^?1 for Fe, respectively. The repeatability, expressed as relative standard deviation, was in the range 1.0–2.1%. The speciation scheme was applied to the analysis of river surface water samples collected in Galicia (Northwest, Spain).     

Comparison of ten digestion procedures for the determination of arsenic in soils by hydride-generation atomic absorption spectrometry

Ten different digestion methods were investigated for the determination of arsenic in soils by hydride-generation atomic absorption spectrometry. These methods included a dry ashing/digestion, several acid-leaching procedures, and digestions in a pressure decomposition vessel or a Kjeldahl apparatus. A certified reference sample was analysed and the results obtained for five other soil samples were compared with the data obtained by spectrophotometry. A nitric/sulphuric acid digestion was the most suitable. A brief interference study is reported.     

微波消解-高分辨连续光源原子吸收光谱法测定锁阳和韭菜籽中的重金属元素含量

利用微波消解-高分辨连续光源原子吸收光谱法测定锁阳、韭菜籽两种中药材中铜(Cu)、铅(Pb)、镉(Cd)、铬(Cr)、砷(As)和汞(Hg)的含量.采用微波消解进行样品前处理,火焰原子吸收法测定其中的Cu含量,石墨炉原子吸收法测定Pb、Cd和Cr含量,氢化物发生原子吸收法测定As、Hg含量.方法线性关系良好,相关系数R^2大于0.999,加标回收率为95.61%~100.1%,RSD为0.8%~3.3%,测得锁阳和韭菜籽中Cu、Pb、Cd、Cr、As和Hg的含量值均低于《药用植物及制剂进口绿色行业标准》和食品安全国家标准《食品中污染物限量》(GB2762-2012)中规定的限量指标.方法分析速率快、干扰少、精密度高,适用于中药材中重金属含量的测定.     

Determination of Lead,Cadmium and Mercury in Surface Marine Sediments and Mussels

Abstract

Lead, cadmium and mercury were determined in sediments and mussels, and the ability of these indicators to record metal variations in coastal marine environment is described in this work. The results of an extended investigation of the status of three gulfs at Northern Greece are given, regarding the content of these metals in surface sediments and Mytilus galloprovincialis. The samples were collected during a four-year period. The total concentration of the above heavy metals was determined after digestion of the samples by suitable mixtures of acids, including nitric, perchloric and hydrofluoric acid. The digestion was carried out in a steel pressurised bomb with closed teflon vessels. Lead and cadmium were determined by means of electrothermal atomic absorption spectrometry (ETAAS), and mercury by cold vapour atomic absorption spectrometry (CVAAS). The results were statistically evaluated by analysis of variance, and emphasis was given to annual, seasonal and spatial sources of variation. The annual changes during the last four years and the spatial distribution of heavy metals load is also discussed.     

高压密闭消解-原子吸收光度法同时测定土壤中的铜、锌、铅、镉、镍、铬

采用高压密闭消解-原子吸收光度法同时测定土壤中铜、锌、铅、镉、镍、铬6种重金属元素。通过剖析不同消解体系,选择了最佳消解条件和测定条件。测定土壤中各元素的回收率均在86%～110%之间,相对标准偏差均小于8.0%(n=6)。