多孔单分散交联聚苯乙烯-二乙烯苯离子对色谱固定相分离8种阴离子

以一步种子溶胀聚合法制备的粒径为8 μm的多孔单分散交联聚苯乙烯-二乙烯苯(PSt-DVB)树脂为离子对色谱固定相, 2 mmol/L 氢氧化四丁基铵(TBAOH)、10%(V/V)乙腈和1.5 mmol/L Na2CO3的混合液为流动相, 在流速为1.0 mL/min下, 成功实现了8种阴离子(F-, Ac-, Cl-, NO-2, Br-, NO-3, SO2-4和HPO2-4)的分离.考察了淋洗液的配比对8种无机阴离子分离的影响.在最优条件下, 8种离子表现出良好的重现性及较好的线性关系, 色谱柱具有良好稳定性及较好的分离能力.将其用于雪水中阴离子的分析, 6种离子在15 min内完全分离, 各离子加标回收率在93.6%～110.4%之间.此固定相也可用于IO-3, HCOO-, ClO-3, BrO-3, ClCH2COO-和H2C2O4混合样的分离.     

离子色谱法检测印刷电路板中的阴离子

采用Na2CO3 NaHCO3为淋洗液和抑制电导检测,对印刷电路板上浸提出的5种常见阴离子F-、Cl-、Br-、NO3-、SO42-同时进行分离检测。在所采用的色谱条件下各阴离子在15 min内即可完成分析。线性良好,检出限为0.05μg/mL(Cl-为0.01μg/mL),回收率在96.70%~101.25%之间,该方法能够在印刷电路板表面洁净度的评价分析中发挥作用。     

离子色谱法同时测定火场爆炸残留物中9种典型阴离子

建立了离子色谱（IC）同时测定火场爆炸残留物中9种典型阴离子（Cl^-、NO₂^-、ClO₃^-、NO₃^-、CO₃^2-、SO₄^2-、S₂O₃^2-、SCN^-、ClO₄^-）的分析方法。使用高容量阴离子交换柱IonPac AS20（250 mm×4 mm）分离,以氢氧化钾（KOH）溶液为流动相,梯度淋洗,进样量为20 μL,柱温为40℃,流速为1.20 mL/min,在25 min内完成了9种典型阴离子的分离分析。9种阴离子在各自的范围内均呈现良好的线性关系,相关系数均大于0.999。9种阴离子的平均加标回收率为92.5%~101.3%,相对标准偏差为1.9%~2.8%（n=6）。该方法简便快捷,选择性好,灵敏度高,可满足火场爆炸残留物中无机离子的分析要求。     

柱切换离子色谱法测定丙酮中痕量阴离子

建立了测定丙酮中痕量阴离子的离子色谱分析方法.采用的是高效液相柱切换进样,其中泵的流速为0.5 mL/min,使低浓度的丙酮水溶液在保护柱上富集,通过离子色谱抑制电导法分离和检测丙酮样品中痕量的阴离子.色谱条件为:以IonPacAG9-HC(50 mm×2 mm)型柱串联在定量环中进行富集,IonPacAG9-HC(50 mm×2 mm)保护柱,IonPac AS9-HC(250 mm×2 mm)阴离子分离柱进行分离,流动相为9 mmol/L Na2CO3-1.667 mol/L NaHCO3,所得回收率在96.21%～101.56%之间,线性良好,且具有较好的重现性和较低的检出限.     

离子色谱法同时测定土壤中Cl-、SO42-和 NO3-

利用离子色谱法同时测定土壤中的Cl^-、SO4^2-、NO3^-三种无机阴离子。采用30 mmol/L KOH淋洗液在1.2 mL/min流速下对Cl^-、SO4^2-、NO3^-三种无机阴离子进行分离测定,混合标准溶液的相对标准偏差为0.16%~0.84%,三种阴离子的线性范围都在0~150 mg/L,线性相关系数均大于0.999。三种阴离子的检出限分别是0.062、0.096和0.064 mg/L。对四种国家标准物质的测定结果表明(n=9),测定值与标准值一致,相对标准偏差(RSD)<3%,三种阴离子的加标回收率为95.6%~109%。采用离子色谱法测定土壤中的Cl^-、SO4^2-、NO3^-三种无机阴离子,方法简便、快捷、无污染,对人体无任何伤害,真正实现了绿色化学的分析要求。在6 min以内完成分析,适合大批量土壤水溶盐阴离子的测定。     

离子色谱法测定蓝藻培养液中有机酸和无机阴离子

建立了一种利用阴离子交换色谱柱分离,电导检测器同时测定17种有机酸和7种阴离子的方法。采用Ionpac AS11-HC阴离子交换柱,KOH溶液作为淋洗液,梯度洗脱,流量为1.0mL/min,柱温为30℃,进样体积为25μL。24种分析物测定结果的相对标准偏差在0.31%~2.67%之间,线性相关系数均大于0.996,平均加标回收率在80.3%~108.5%之间。该方法可用于微生物培养液中有机酸和阴离子的同时测定。     

化妆品中阴阳离子的快速测定及其用于化妆品鉴别的研究

用离子色谱电导检测器对黑泥类化妆品中的阴、阳离子(Na+,NH+4,K+,Mg 2+ ,Ca 2+ ,Cl-,Br-,NO-2,NO-3和SO 2- 4)进行了测定。阳离子分离条件: 阳离子交换柱ICS C25,均苯四甲酸淋洗液浓度2.0 mmol/L ,流速0.6 mL/min ;阴离子分离条件: 阴离子交换柱Shim pack IC A1,淋洗液为2.5 mmol/L 邻苯二甲酸和2.4 mmol/L 三羟基氨基甲烷,流速1.0 mL/min 。结果表明,上述10种离子在较宽浓度范围内有良好     

整体柱离子相互作用色谱快速分析无机阴离子

研究了用硅胶整体柱和直接电导检测的离子相互作用色谱快速分析常见无机阴离子的方法。实验采用氢氧化四丁铵和邻苯二甲酸为淋洗液,讨论了包括淋洗液浓度、流速和pH对分离的影响。当以1.5 mmol/L氢氧化四丁铵和1.1 mmol/L邻苯二甲酸为淋洗液(pH 5.5),流速6 mL/min时,可以在1 min内分离Cl-、NO2-、Br-、NO3-、ClO3-、SO42-和I-7种阴离子。方法的检出限为0.3~1.9 mg/L,峰面积、峰高的相对标准偏差(RSD,n=5)分别为0.4%~2.2%和0.1%~1.5%。将该法用于测定矿泉水和地下水中的阴离子,加标回收率在97.9%~100.3%之间。     

高效阴离子交换色谱在易极化阴离子痕量分析中的应用

以45 mmol/L的 NaOH溶液作淋洗液,采用强亲水性的IonPac AS16阴离子交换分析柱和脉冲安培检测器,在15 min内分离检测了Br-,S2O2-3,I-和SCN-4种易极化阴离子,检测限(以3倍信噪比计)分别为0.5,0.2,0.05和2 μg/L (进样25 μL)。痕量离子的标准溶液平行9次进样测定的相对标准偏差为0.8%～3.7%。而在相同的色谱条件下,抑制型电导检测器对上述4种阴离子的检测限分别为1,1,2和10 μg/L,平行9次进样测定的相对标准偏差为0.9%～4.7%。通过实验比较可知,脉冲安培检测器的灵敏度是抑制型电导检测器的2～40倍。在测定上述易极化阴离子时,脉冲安培检测器具有选择性强、精密度好和灵敏度高等优点。     

用流动注射分析法测定强碱性阴离子交换树脂的交换容量

建立了快速测定微量氯离子的FIA分光光度法和快速测定强碱性阴离子交换树脂交换容量的FIA法。本方法将离子交换微型柱导入树脂交换容量的测定中 ,不但获得了很好的精度 (RSD <0 .9% ) ,而且使测定效率提高了近 30倍。优选实验得到的最佳测定条件为再生液流速 0 .5mL/min ,再生剂用量 :333mL/ g,再生剂浓度 :3.0 % (W /V) ;样品液流速 :1 .5mL/min ;树脂交换容量测定温度 :2 5℃± 5℃。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.