酸功能化离子液体催化三聚甲醛与烯烃的Prins反应

以烯烃和三聚甲醛为原料,采用酸功能化离子液体作催化剂,在无溶剂体系中经Prins反应合成了1,3-二氧己环衍生物.对不同离子液体的催化活性进行了考察,选择[BsTmG][HSO4]作为反应的催化剂.研究了温度、时间以及原料摩尔比对反应的影响,得到较佳实验条件为:催化剂用量为烯烃摩尔量的5%,三聚甲醛与烯烃摩尔比为1∶1,温度80℃,时间10 h.该催化体系具有较好的底物适用性,离子液体[BsTmG][HSO4]经简单的萃取分离后重复使用8次,仍保持较好的催化活性.     

吗啡啉功能化酸性离子液体的合成、表征及其催化酯化性能

制备和表征了三种新型质子酸离子液体: 吗啡啉硫酸氢盐([Hnhm]HSO4)、4-甲基吗啡啉硫酸氢盐 ([Hnmm]HSO4)和SO3H-功能化的4-(3-磺丙基)吗啡啉硫酸氢盐([C3SO3Hnhm]HSO4). 以氯乙酸(CAA)和乙醇合成氯乙酸乙酯的酯化反应考察了它们的酸性和催化活性, 并与1-(3-磺酸基)丙基-3-甲基咪唑硫酸氢盐、1-(3-磺丙基)吡啶硫酸氢盐、1-(3-磺丙基)-2-吡咯烷酮硫酸氢盐等三种具有不同氮杂环的SO3H-功能化酸性离子液体以及浓硫酸相对照. 结果表明, 上述SO3H-功能化离子液体对酯化反应的催化性能比非SO3H-功能化的[Hnhm]HSO4和[Hnmm]HSO4都高, 等同甚至优于浓硫酸. 当反应条件为: n(EtOH)∶n(CAA)∶n([C3SO3Hnhm]HSO4)＝1.3∶1∶0.2, 反应温度80 ℃, 反应时间3 h, 酯收率可达93.4%. 而且离子液体经真空干燥重复使用9次, 催化活性仍无明显下降. 以[C3SO3Hnhm]HSO4催化乙酸和不同醇的酯化反应获得较高的酯收率和选择性, 离子液体跟酯产物均能自动分相. 还考察了SO3H-功能化酸性离子液体对奥氏体316不锈钢的腐蚀性. 尽管SO3H-功能化离子液体与硫酸的酸性相近, 但对钢试样的腐蚀率不到硫酸的1/3.     

多功能Na2WO4-离子液体催化体系催化环己醇一锅合成己内酰胺

己内酰胺是合成尼龙-6和工程塑料的关键中间体.工业上己内酰胺的合成工艺分三步:以环己醇为原料合成环己酮,环己酮氨肟化合成环己酮肟,环己酮肟重排生成己内酰胺.该工艺存在工艺流程长、重排过程中使用发烟硫酸腐蚀设备、形成大量低值副产物硫酸铵等问题.随着人们对环境保护意识的提高,发展环境友好、经济效益高的直接合成己内酰胺工艺已经迫在眉睫.多步串联反应具有设备投资少、中间分离步骤少、反应效率高等优点,其关键问题之一是多功能催化剂的开发.环己醇作为环己烷氧化反应的副产物,能够直接用于己内酰胺的合成,具有理论研究价值和工业应用意义.本文构建了以环己醇氧化、环己酮肟化和环己酮肟重排反应构成的串联反应系统,可缩短己内酰胺合成工艺流程,降低能耗,减小环境污染.合成了九种离子液体,并与Na2WO4组成催化体系,以环己醇、过氧化氢和羟胺为原料,催化环己醇直接合成己内酰胺.首先研究了不同Na2WO4-离子液体催化体系对环己醇直接氧化合成环己酮反应的影响.反应介质的酸性和离子液体水油两相中的相转移功能是影响氧化过程的两个主要因素.Na2WO4-磺酸基功能化的离子液体催化剂具有较高的氧化活性.这是由于磺酸基的引入提高了催化剂酸性,另外磺酸基功能化的离子液体随碳链的增长,催化剂的亲油性增强,即该催化剂相转移功能增强.考察了九种离子液体对氧化过程的影响,其中Na2WO4-[BSTma]HSO4在氧化过程中催化活性最高,因此将其用于催化环己酮与羟胺合成己内酰胺的反应,并考察了环己酮与[BSTma]HSO4的摩尔比对该反应的影响,发现该摩尔比为1:0.08时,反应效果最好.最后,将Na2WO4-[BSTma]HSO4体系用于催化环己醇直接合成己内酰胺的反应.考察了反应温度、反应时间和环己醇与[BSTma]HSO4摩尔比的影响.在氧化时间为300 min,肟化和重排时间为150 min,反应温度为80℃,环己醇:H2O2:(NH2OH)2·H2SO4:Na2WO4·2H2O:[BSTma]HSO4的摩尔比为1.00:1.50:0.50:0.06:0.08的条件下反应效果最好,环己醇转化率为97.3%,己内酰胺收率为76.0%.Na2WO4-[BSTma]HSO4催化体系活性较高的原因是离子液体阳离子的相转移作用,以及在氧化过程中离子液体与过氧钨酸盐的配位作用和对Beckmann重排过程中中间产物的稳定作用.研究了Na2WO4-[BSTma]HSO4催化体系的普适性,发现该催化体系对所考察的脂肪醇和芳香醇直接合成酰胺均具有较好的催化活性.另外,回用的Na2WO4-[BSTma]HSO4催化剂仍具有较好的催化活性.因此,该催化体系具有高效易回收、操作简单和反应条件温和的优点.     

负载型离子液体催化芳香烯和甲醛的Prins缩合反应

采用溶胶凝胶法制备了一系列硅胶负载型离子液体催化剂(IL/sg),并成功应用于甲醛与苯乙烯及其衍生物的Prins反应中.利用红外光谱(FT-IR)、元素分析(EA)和氮气吸附-脱附等对催化剂结构进行了表征.研究表明,磺酸功能化离子液体1-甲基-3-丁磺酸基咪唑硫酸氢盐固载得到的负载型催化剂(Bs MIm HSO4/sg)表现出最佳的催化活性.在催化剂投料量为烯烃的3%,甲醛与烯烃摩尔比为4∶1,80℃下反应8 h,苯乙烯转化率达到了100%,产物选择性为90%.催化剂经简单的过滤分离后重复使用5次,仍保持良好的催化活性.此外,该催化体系具有较好的底物适用性.     

酸功能化离子液体催化合成柠檬酸三丁酯

合成并表征了酸功能化离子液体,用于催化合成柠檬酸三丁酯(TBC).通过考察各种离子液体的催化活性及重复使用性能,选定酸功能化离子液体[HSO3-pmim]HSO4为催化合成TBC的催化剂.研究了催化剂用量、醇酸摩尔比、反应时间等因素对酯化反应的影响,得到其较佳工艺条件为:催化剂用量为反应物总质量的8·0%,醇酸摩尔比为5·5∶1,反应温度110~150℃,反应时间3h.此条件下,酯化率达到99·0%.分离出的离子液体未经任何处理重复使用8次后,酯化率仍为95·2%.     

吡咯烷酮酸性离子液体的合成及其对酯化反应的催化活性

合成并表征了 2-吡咯烷酮硫酸氢盐([Hnhp]HSO4)、 1-甲基-2-吡咯烷酮硫酸氢盐([Hnmp]HSO4)、 1-甲基咪唑硫酸氢盐([Hmim]HSO4)、 1-(3-磺酸基)-丙基-3-甲基咪唑硫酸氢盐([C3SO3Hmim]HSO4)和1-(3-磺酸基)-丙基-2-吡咯烷酮硫酸氢盐([C3SO3Hnhp]HSO4)等以HSO-4为阴离子的质子酸离子液体,并以乙酸和正丁醇的酯化反应考察了这些离子液体的催化活性.结果表明,当n(n-BuOH):n(MeCO2H):n([C3SO3Hnhp]HSO4)=1.2:1:0.005,反应温度为120 ℃和反应时间为 1 h 时,酯收率可达99%以上;反应结束后离子液体与酯产物可分成两相,而且该离子液体重复使用8次,催化活性没有明显下降.探讨了阳离子结构及Brnsted酸性对催化活性的影响,考察了离子液体与酯化反应相关组分的互溶性.结果表明,离子液体的分相性能对催化效果有较大的影响,离子液体的催化活性与其酸性、溶解性密切相关.     

己内酰胺功能化离子液体的合成及其催化酯化性能的研究

以价格低廉的己内酰胺为原料,制备和表征了4种己内酰胺功能化离子液体:1-(3-磺丙基)己内酰胺硫酸氢盐([C3SO3HCP]HSO4)、1-(3-磺丙基)己内酰胺对甲苯磺酸盐([C3SO3HCP]PTSA)、1-(3-磺丙基)己内酰胺磷酸氢盐([C3SO3HCP]H2PO4)、1-(3-磺丙基)己内酰胺四氟硼酸盐([C3SO3HCP]BF4).以乙酸和乙醇的酯化反应考察4种酸性离子液体的催化活性,并与3种具有不同氮杂环的SO3H-功能化离子液体和浓硫酸相对照.结果表明:当n(C2H5OH)∶n(CH3COOH)=1∶1.5,催化剂[C3SO3HCP]HSO4用量为酸醇总质量的5%,反应温度80℃,反应时间6 h,酯收率可达93.8%,离子液体经真空干燥重复使用10次后,仍具有较高的催化活性,而且对奥氏体316 L不锈钢试样的腐蚀率不到浓硫酸的1/6.还考察了以[C3SO3HCP]HSO4为催化剂催化合成系列乙酯也获得了较高的酯收率,且离子液体均能与酯产物自动分相.与传统硫酸催化酯化相比,此类离子液体催化酯化具有生产成本低、过程清洁、腐蚀率低、使用周期长等优点,具有替代传统浓硫酸催化醇酸酯化反应的潜力.     

新型异核双阳离子型磺酸功能化离子液体的合成及其催化活性

合成了三种基于1-吗啉基-3-咪唑基丙烷异核双阳离子的新型二磺酸功能化BrΦsted酸性离子液体:1-[4-(4-磺酸丁基)吗啉基-3-[3-(4-磺酸丁基)咪唑基]丙烷二(三氟甲烷磺酸)盐{A,[(C4SO3H)m(C4SO3H)i]p(OTf)2}、1-[4-(4-磺酸丁基)吗啉基-3-[3-(4-磺酸丁基)咪唑基]丙烷二硫酸氢盐{B,[(C4SO3H)m(C4SO3H)i]p(HSO4)2}及1-[4-(4-磺酸丁基)吗啉基-3-[3-(4-磺酸丁基)咪唑基]丙烷二磷酸二氢盐{C,[(C4SO3H)m(C4SO3H)i]p(H2PO4)2}.其结构经FT-IR、MS、NMR等确认.选择吗啉、甲基咪唑单磺酸功能化离子液体作为对照组,以苯甲醛与环己酮之间的交叉Aldol缩合反应考察了其催化活性.用Hammett方法测定了其酸性,实验结果表明,所合成的三种双磺酸功能化离子液体的催化能力比单磺酸功能化离子液体的强,其酸性次序与催化活性相一致.其中,阴离子为三氟甲烷磺酸根的离子液体对18种Aldol缩合反应底物有极好的适应性,并且催化活性最强,产率高达90%,在重复使用10次后,仍保持较高的反应活性.关键词二磺酸功能化离子液体;合成;催化活性;Hammett方法;交叉Aldol缩合反应;重复使用     

磺酸型离子液体催化“一锅法”合成酰胺烷基萘酚

用磺酸型离子液体1-甲基-3-磺酸丙基咪唑硫酸氢盐([MIMPS][HSO4])催化β-萘酚、芳香醛和酰胺(或脲)3组分"一锅法"类Ritter反应合成了酰胺烷基萘酚。投料比为n(β-萘酚)∶n(芳香醛)∶n(酰胺或脲)∶n([MIMPS][HSO4])=1∶1∶1.3∶0.1,无需溶剂,恒温125℃反应5～40min,通过简单水洗抽滤即可分离产物,酰胺烷基萘酚产率为85%～97%。离子液体[MIMPS][HSO4]可回收重复使用4次,其催化活性无明显降低。探讨了醛、酰胺或脲结构对反应的影响及可能的反应机理。     

酸性离子液体的合成和光谱表征

合成了基于N-甲基咪唑、2-吡咯烷酮阳离子的两个Br nsted酸性离子液体系列:[Hmim]HSO4/BF4、[Hnhp]HSO4/BF4以及两种—SO3H功能化酸性离子液体1-(3-磺酸基)丙基-3-甲基咪唑硫酸氢盐([C3SO3Hmim]HSO4)、N-(3-磺酸基)丙基吡咯烷酮硫酸氢盐([C4SO4Hnnp]HSO4)。其中,[Hnhp]HSO4/BF4,[C4SO4Hnnp]HSO4是本实验设计合成的新型酸性离子液体,而咪唑类离子液体用于对照。上述6种离子液体均以核磁共振、电喷雾质谱、红外光谱和紫外光谱分析法对结构加以表征并确认;并以它们作为溶剂和催化剂对乙酸、乙醇酯化反应进行初步试验,结果表明所合成的新型酸性离子液体(尤其是引入磺酸基的)是酯化反应较理想的绿色液体酸催化剂。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.