pH-responsive deoxyribonucleic acid capture/release by polydopamine functionalized magnetic nanoparticles

Polydopamine functionalized magnetic nanoparticles (PDA@Fe₃O₄) were prepared and characterized by transmission electron microscopy, scanning electron microscopy, zeta potential and vibrating sample magnetometry. They were found to enable highly efficient capture of genomic deoxyribonucleic acid (DNA). The adsorption capacity of PDA@Fe₃O₄ for genomic DNA can reach 161 mg g⁻¹. The extraction protocol used aqueous solutions for DNA binding to and releasing from the surface of the magnetic particles based on the pH inducing the charge switch of amino and phenolic hydroxyl groups on PDA@Fe₃O₄. The extracted DNA with high quality (A₂₆₀/A₂₈₀ = 1.80) can be directly used as templates for polymerase chain reaction (PCR) followed by capillary electrophoresis (CE) analysis. None of the toxic chemical reagents and PCR inhibitors was used throughout the whole procedure. PDA@Fe₃O₄ based magnetic solid phase extraction (MSPE) method was superior to those using commercial kit and traditional phenol–chloroform extraction methods in yield of DNA. The developed PDA@Fe₃O₄ based MSPE-PCR-CE method was applied for simultaneous and fast detection of Listeria monocytogenes and Escherichia coli O157:H7 in milk.     

N-Methylimidazolium modified magnetic particles-assisted highly sensitive Escherichia coli detection based on polymerase chain reaction and capillary electrophoresis

Effective bacteria detection and quantification are essential prerequisite for the prevention and treatment of infectious diseases. Herein, we report a method for the detection and quantification of Escherichia coli (E. coli).N-Methylimidazolium modified magnetic particles (MIm-MPs) are synthesized successfully and used as an efficient magnetic material for the isolation and concentration of E. coli. The factors including pH of binding buffer, concentration of elution buffer and elution time which may affect the capture and elution efficiencies are optimized. The linear correlation between bacteria concentration and peak area of polymerase chain reaction (PCR) product analyzed by capillary electrophoresis (CE) is determined. Rapid preconcentration of trace amount of E. coli (10¹ cfu mL⁻¹) in large volume of aqueous sample (500 mL) is achieved, and the capture efficiency can reach 99%. The quantification of bacteria in large volume of spiked tap water and mineral water samples is realized. The recoveries for different concentrations of E. coli in tap and mineral water samples are in the range between 83% and 93%. The results demonstrate that this MIm-MPs-PCR-CE method can be applied to detect and quantify bacteria in real samples.     

N-Methylimidazolium ionic liquid-functionalized silica as a sorbent for selective solid-phase extraction of 12 sulfonylurea herbicides in environmental water and soil samples

A novel material for solid-phase extraction (SPE) was synthesized by chemical immobilization of a functionalized N-methylimidazolium ionic liquid on silica gel. Cartridges packed with the synthetic material were successfully applied to the pre-concentration of trace-level thifensulfuron-methyl, metsulfuron-methyl, chlorsulfuron, sulfometuron-methyl, rimsulfuron, ethametsulfuron, tribenuron-methyl, bensulfuron-methyl, prosulfuron, pyrazosulfuron, chlorimuron-ethyl and primisulfuron from environmental water and soil samples. The 12 sulfonylurea herbicides (SUs) obtained a good resolution in less than 50 min using HPLC with a UV detector. The recovery studies using the ionic liquid-functionalized silica as a sorbent were performed by three consecutive extractions of water and soil samples at two spiked levels. The average recovery for each analyte was in the range of 53.8–118.2% for the water samples and 60.9–121.3% for the soil sample, with RSDs lower than 11.3% in all cases. The ionic liquid-functionalized silica cartridges showed higher selectivity for the SUs than commercially available C₁₈ cartridges did.     

Magnetic solid phase extraction based on phenyl silica adsorbent for the determination of tetracyclines in milk samples by capillary electrophoresis

A magnetic solid phase extraction method coupled to capillary electrophoresis is proposed for the determination of tetracycline, oxytetracycline, chlortetracycline and doxycycline in milk samples. Five different magnetic phenyl silica adsorbents covered with magnetite were synthesized by varying the molar ratio of phenyltrimethylsilane and tetramethylorthosilicate; these adsorbents were evaluated in terms of their pH and degree of hydrophobicity for tetracycline retention. The optimal, selected combination of conditions was a pH of 10.0 and a magnetic sorbent ratio of 4:1; under these conditions, the retention capacity ranged from 99.7% to 101.2% for the four tetracyclines analyzed. The elution conditions and initial sample volume of the proposed extraction method were also optimized, and the best results were obtained with 1×10(-3) M acetic acid in methanol as eluent and a 200 ml of sample volume. Under optimal conditions, average recoveries ranged from 94.2% to 99.8% and the limits of detection ranged from 2 to 9 μg l(-1) for the four tetracyclines. After the proposed method was optimized and validated, 25 milk samples of different brands were analyzed, oxytetracycline residues were detected in five samples, in concentrations ranging from 98 to 213 μg l(-1). Subsequent analysis of positive samples by SPE-CE and magnetic solid phase extraction-HPLC revealed than no significant differences were found from results obtained by the proposed methodology. Thus, the developed magnetic extraction is a robust pre-concentration technique that can be coupled to other analytical methods for the quantitative determination of tetracyclines.     

Humic acids as both matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and adsorbent for magnetic solid phase extraction

In the present study, humic acids (HAs) were applied as both a matrix for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and an adsorbent of magnetic solid phase extraction (MSPE) for the first time. As natural macromolecule compounds, HAs are inherently highly functionalized and contain laser energy absorbing–transferring aromatic structures. This special molecular structure made HAs a good candidate for use as a MALDI matrix in small molecule analysis. At the same time, due to its good adsorption ability, HAs was prepared as MSPE adsorbent via a simple co-mixing method, in which the commercially available HAs were directly mixed with Fe₃O₄ magnetic nanoparticles (MNPs) in a mortar and grinded evenly and completely. In this process, MNPs were physically wrapped and adhered to tiny HAs leading to the formation of magnetic HAs (MHAs). To verify the bi-function of the MHAs, Rhodamine B (RdB) was chosen as model compound. Our results show that the combination of MHAs-based MSPE and MALDI-TOF-MS can provide a rapid and sensitive method for the determination of RdB in chili oil. The whole analytical procedure could be completed within 30 min for simultaneous determination of more than 20 samples, and the limit of quantitation for RdB was found to be 0.02 μg/g. The recoveries in chili oil were in the range 73.8–81.5% with the RSDs less than 21.3% (intraday) and 20.3% (interday). The proposed strategy has potential applications for high-throughput analysis of small molecules in complex samples.     

Simultaneous determination of flumequine and oxolinic acid in chicken tissues by solid phase extraction and capillary electrophoresis

This paper describes capillary electrophoresis (CE) methodology for simultaneous determination of oxolinic acid (OXO) and flumequine (FLU) in spiked chicken tissue using norfloxacin (NOR) as internal standard (IS), with diode array detection. The analytes were extracted using dichlorometane and NaOH and pre-concentrated by solid phase extraction (SPE).The recoveries obtained were 94 and 84% for oxolinic acid and flumequine , respectively. The detection and quantification limits achieved were 15 and 48 μg kg⁻¹ for oxolinic acid, respectively, and 10 and 30 μg kg⁻¹ for flumequine. The sensitivity of the method proposed allows the determination of these drugs at a residue level far below their maximum residue limit (MRL) established by the European Union (EU).     

Polydopamine‐coated magnetic molecularly imprinted polymer for the selective solid‐phase extraction of cinnamic acid,ferulic acid and caffeic acid from radix scrophulariae sample

We describe novel cinnamic acid polydopamine‐coated magnetic imprinted polymers for the simultaneous selective extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample. The novel magnetic imprinted polymers were synthesized by surface imprinting polymerization using magnetic multi‐walled carbon nanotubes as the support material, cinnamic acid as the template and dopamine as the functional monomer. The magnetic imprinted polymers were characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and vibrating sample magnetometry. The results revealed that the magnetic imprinted polymers had outstanding magnetic properties, high adsorption capacity, selectivity and fast kinetic binding toward cinnamic acid, ferulic acid and caffeic acid. Coupled with high‐performance liquid chromatography, the extraction conditions of the magnetic imprinted polymers as a magnetic solid‐phase extraction sorbent were investigated in detail. The proposed imprinted magnetic solid phase extraction procedure has been used for the purification and enrichment of cinnamic acid, ferulic acid and caffeic acid successfully from radix scrophulariae extraction sample with recoveries of 92.4–115.0% for cinnamic acid, 89.4–103.0% for ferulic acid and 86.6–96.0% for caffeic acid.     

Solid phase synthesis of N-aminodipeptides in high optical purity

N-Aminodipeptide derivatives can be easily prepared with high optical purity on solid phase via a Mitsunobu protocol between a solid supported α-hydroxyacid and a free phthaloylated α-Z-N-aminohydrazide.     

Recent advances of adsorbents in solid phase extraction for environmental samples

In recent years, some new and sensitive analytical instruments have been invented or existing instruments have been improved, which have resulted in many advanced achievements. However, sample pre-treatment techniques still play important and irreplaceable roles in the analysis of pollutants. Among the developed sample pre-treatment techniques, solid phase extraction is the most often used method and has been widely applied worldwide. In solid phase extraction, adsorbent is the key part to achieve high sensitivity and enrichment efficiency, which is the hot topic in analytical and environmental fields in recent years. In order to deeply understand the prospect of solid phase extraction, this review summarises the recent advances of adsorbents including ion imprinting materials, magnetic materials, core-shell materials, mesoporous materials, carbon nanotubes, TiO₂ nanotube arrays and some other new materials.     

Carbon nanotubes as SPE sorbents for the extraction of salicylic acid from river water

This paper deals with the ability of different types of carbon nanotubes to adsorb salicylic acid in river water samples. The use of these nanoparticles as a sorbent in a SPE procedure prior to CE analysis is essential for improving the enrichment factor and the recovery values. Several experimental variables were optimized in order to maximize the extraction efficiency. The proposed analytical method is simple, fast, and entails low solvent consumption. Furthermore, salicylic acid could be extracted from river water providing good recovery values in the range from 76.2 to 102.0% (RSD<8.2%). The combination of the specific chemical properties of analyte and the unique physicochemical features of carbon nanotubes sheds new light on the use of these nanoparticles as excellent sorbent materials of pharmaceutical compounds in environmental matrices.     

Application of a new hybrid organic-inorganic monolithic column for efficient deoxyribonucleic acid purification

A new hybrid organic-inorganic monolithic column for efficient deoxyribonucleic acid (DNA) extraction was prepared in situ by polymerization of N-(β-aminoethyl)-γ-aminopropyltriethoxysilane (AEAPTES) and tetraethoxysilane (TEOS). The main extraction mechanism was based on the Coulombic force between DNA and the amino silica hybrid monolithic column. DNA extraction conditions, such as pH, ion concentration and type, and loading capacity, were optimized online by capillary electrophoresis with laser-induced fluorescence detection. Under optimal condition, a 6.0-cm monolithic column provided a capacity of 48 ng DNA with an extraction efficiency of 74 ± 6.3% (X ± RSD). The DNA extraction process on this monolithic column was carried out in a totally aqueous system for the successful purification of DNA and removal of proteins. The PBE2 plasmid could be extracted from Bacillus subtilis (B. subtilis) crude lysate within 25 min, and the purified DNA was suitable for the amplification of a target fragment by polymerase chain reaction. This study demonstrates a new attractive solid-phase support for DNA extraction to meet the increasingly miniaturized and automated trends of genetic analyses.     

Activated carbon/diatomite-based magnetic nanocomposites for magnetic solid-phase extraction of S-phenylmercapturic acid from human urine

In this study, activated carbon/diatomite-based magnetic nancomposites (denoted as AC/DBMNs) were synthesized and applied as an adsorbent for magnetic solid-phase extraction of S-phenylmercapturic acid (S-PMA) from human urine prior to high-performance liquid chromatography. The surface morphologies and structures of AC/DBMNs were characterized by Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X-ray diffraction, Brunauer–Emmett–Teller surface area, vibrating sample magnetometer and ζ-potential measurements. The experimental parameters including sample volume, sample pH, adsorbent amount, extraction time, elution solvent and desorption time were investigated in detail. Under the optimum conditions, the method exhibited good linearity (r > 0.9993) within the concentration ranges of 0.03–1.0 mg/L. Moreover, the limits of detection and quantification were 0.01 and 0.03 mg/L, respectively. The enrichment factor was 5, and good recoveries (88.9–97.3%) with relative standard deviations in the range of 5.6–6.8% (n = 6) for inter-day and 6.3–8.1% (n = 6) for intra-day were achieved. The developed method was successfully applied to the analysis of S-PMA in urine samples. In addition, this accurate and sensitive method has great potential to be applied in the early screening and clinical diagnosis of the workers exposed to benzene.     

Magnetic dispersive solid phase extraction using modified magnetic multi-walled carbon nanotubes combined with electrothermal atomic absorption spectrometry for the determination of selenium

A novel magnetic dispersive solid phase extraction method using magnetic multi-walled carbon nanotubes modified with 5-mercapto-3-phenyl-1,3,4-thiadiazole-2-thione potassium salt (bismuthiol II) (MMWCNTs@Bis) as the sorbent was developed for the separation and preconcentration of inorganic selenium (IV) prior to its determination by electrothermal atomic absorption spectrometry. The prepared MMWCNTs@Bis sorbent was characterised by Fourier transform infrared spectroscopy, scanning electron microscopy, vibrating sample magnetometer and X-ray diffraction. Total selenium was determined after reduction of Se(VI) to Se(IV) by addition of hydrochloric acid and heating the mixture in a boiling water bath. Se(VI) concentration was determined from the difference between the amounts of total selenium and Se(IV). Under the optimised experimental conditions, an enhancement factor of 196 and a detection limit (based on 3S_b/m) of 0.003 µg L^?1 was obtained for aqueous samples. The relative standard deviation at 0.1 µg L^?1 concentration level of Se(IV) (n = 6) was found to be 5.2 and 7.7% for intra- and inter-day analysis, respectively. The method was successfully applied to the determination of inorganic selenium species in water and total selenium in food samples.     

Rapid preparation of methyltrimethoxy‐modified magnetic mesoporous silica as an effective solid‐phase extraction adsorbent

A time‐saving method was applied to synthesize methyltrimethoxy‐modified magnetic mesoporous silica with or without p‐toluenesulfonic acid as the catalyst for magnetic solid‐phase extraction. The synthesized materials were systematically characterized. Results demonstrated that methyltrimethoxy modified magnetic mesoporous silica with p‐toluenesulfonic acid as the catalyst has a relatively smaller aperture and extreme hydrophobicity (water contact angle of 135°). To evaluate the feasibility of these prepared materials as effective adsorbents, it was combined with gas chromatography and electron capture detection to determine 26 polychlorinated biphenyls in environmental water. The result revealed that methyltrimethoxy modified magnetic mesoporous silica with p‐toluenesulfonic acid as the catalyst had the best extraction efficiency and recovery. Under the optimized extracted conditions, the proposed method showed good linearity within the concentration range of 5 to 200 ng/L with correlation coefficients of 0.9969 to 0.9999. The limits of detection and quantification based on signal‐to‐noise ratios of 3 and 10 were in the range of 0.16 to 0.91 and 0.52 to 3.0 ng/L, respectively. The polychlorinated biphenyl concentrations in environmental water samples were successfully determined using the developed method. PCB008 and PCB110 were 4.05 and 8.52 ng/L in Red‐Star lake water (Hubei Province, China), respectively.     

Substituent effect on electrophoretic mobility for a series of poly(N-acryloyl-amino acid)s

In this study, the electrophoretic mobilities (μ) for a series of poly(N-acryloyl-amino acid)s were determined by capillary zone electrophoresis to investigate the effect of substituent on the electrophoretic behavior of polyelectrolytes. The μ values determined showed a strong correlation with the molar volume of the corresponding amino acids.     

Facile synthesis of magnetic one-dimensional polyaniline and its application in magnetic solid phase extraction for fluoroquinolones in honey samples

In this work, we proposed a simple co-mixing method to fabricate magnetic one-dimensional polyaniline (denoted as 1D-PANIs/MNPs). One-dimensional polyanilines (1D-PANIs) and magnetic nanoparticles (MNPs) were prepared by chemical oxidation and solvothermal methods, respectively. When MNPs and 1D-PANIs (with mass ratio 4:1) were co-mixed and vortexed evenly in a solvent (e.g., ethanol, water, acetonitrile), they could assemble into 1D-PANIs/MNPs spontaneously and thus be magnetically separable. To testify the feasibility of 1D-PANIs/MNPs in sample preparation, it was applied as the sorbent for magnetic solid phase extraction (MSPE) of fluoroquinolones (FQs) in honey samples. Under optimized conditions, a rapid, convenient, and efficient method for the determination of four FQs in honey samples by 1D-PANIs/MNPs-based MSPE coupling with high performance liquid chromatography with fluorescence detection (HPLC-FLD) was established. The limits of detection (LODs) for four FQs ranged from 0.4 to 1.4 ng g⁻¹. The intra- and interday relative standard deviations (RSDs) were less than 17.6%. The recoveries of FQs for three spiked honey samples ranged from 86.3 to 121.3%, with RSDs of less than 16.3%.     

N,N,N,N-Tetramethyl-1,3-propanediamine as the catalyst of choice for the Baylis-Hillman reaction of cycloalkenone: rate acceleration by stabilizing the zwitterionic intermediate via the ion-dipole interaction

N,N,N^′,N^′-Tetramethyl-1,3-propanediamine (TMPDA) can be used as an efficient catalyst for the Baylis-Hillman reaction of cycloalkenones. The increased reaction rate was thought be derived from the stabilizing effect of the zwitterionic intermediate via the ion-dipole interaction.     

A novel magnetic poly(aniline-naphthylamine)-based nanocomposite for micro solid phase extraction of rhodamine B

A novel Fe₃O₄–poly(aniline-naphthylamine)-based nanocomposite was synthesized by chemical oxidative polymerization process as a magnetic sorbent for micro solid phase extraction. The scanning electron microscopy images of the synthesized nanocomposite revealed that the copolymer posses a porous structure with diameters less than 50 nm. The extraction efficiency of this sorbent was examined by isolation of rhodamine B, a mutagenic and carcinogenic dye, from aquatic media in dispersion mode. Among different synthesized polymers, Fe₃O₄/poly(aniline-naphthylamine) nanocomposite showed a prominent efficiency. Parameters including the desorption solvent, amount of sorbent, desorption time, sample pH, ionic strength, extraction time and stirring rate were optimized. Under the optimum condition, a linear spiked calibration curve in the range of 0.35–5.00 μg L⁻¹ with R² = 0.9991 was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.10 μg L⁻¹ and 0.35 μg L⁻¹ (n = 3), respectively. The relative standard deviation for water sample with 0.5 μg L⁻¹ of RhB was 4.2% (n = 5) and the absolute recovery was 92%. The method was applied for the determination of rhodamine B in dishwashing foam, dishwashing liquid, shampoo, pencil, matches tips and eye shadows samples and the relative recovery percentage were in the range of 94–99%.     

Microscale solid phase extraction of glyphosate and aminomethylphosphonic acid in water and guava fruit extract using alumina-coated iron oxide nanoparticles followed by capillary electrophoresis and electrochemiluminescence detection

A microscale solid-phase extraction (SPE) method using alumina-coated iron oxide nanoparticles (Fe₃O₄@Al₂O₃ NPs) as the affinity adsorbent for glyphosate (GLY) and its major metabolite aminomethylphosphonic acid (AMPA) in aqueous solution is reported. One milligram of Fe₃O₄@Al₂O₃ NPs was employed to extract both analytes in 5 ml of aqueous solution. After 5 min extraction, magnetic NPs were isolated from sample solution by employing an external magnet. Followed by rinsing the NPs with 5 μl of 20 mM Na₄P₂O₇ solution for 5 min, the extract was directly analyzed using the derivatization-free CE-electrochemiluminescence (CE-ECL) method. With a sample-to-extract volume ratio of 1000, the enrichment factors for GLY and AMPA were 460 and 64, respectively. The limits of detection (LODs) were 0.3 and 30 ng ml⁻¹ for GLY and AMPA in water, respectively. The developed method was applied to the analysis of GLY in guava fruit. The LOD of GLY in guava was 0.01 μg g⁻¹. Total analysis time including sample pretreatment, SPE and CE-ECL was less than 1 h.     

Zinc oxide/polypyrrole nanocomposite as a novel solid phase microextraction coating for extraction of aliphatic hydrocarbons from water and soil samples

In this work, ZnO/PPy nanocomposite coating was fabricated on stainless steel and evaluated as a novel headspace solid phase microextraction (HS-SPME) fiber coating for extraction of ultra-trace amounts of environmental pollutants; namely, aliphatic hydrocarbons in water and soil samples. The ZnO/PPy nanocomposite were prepared by a two-step process including the electrochemical deposition of PPy on the surface of stainless steel in the first step, and the synthesis of ZnO nanorods by hydrothermal process in the pores of PPy matrix in the second step. Porous structure together with ZnO nanorods with the average diameter of 70 nm were observed on the surface by using scanning electron microscopy (SEM). The effective parameters on HS-SPME of hydrocarbons (i.e., extraction temperature, extraction time, desorption temperature, desorption time, salt concentration, and stirring rate) were investigated and optimized by one-variable-at-a-time method. Under optimized conditions (extraction temperature, 65 ± 1 °C; extraction time, 15 min; desorption temperature, 250 °C; desorption time, 3 min; salt concentration, 10% w/v; and stirring rate, 1200 rpm), the limits of detection (LODs) were found in the range of 0.08–0.5 μg L⁻¹, whereas the repeatability and fiber-to-fiber reproducibility were in the range 5.4–7.6% and 8.6–10.4%, respectively. Also, the accuracies obtained for the spiked n-alkanes were in the range of 85–108%; indicating the absence of matrix effects in the proposed HS-SPME method. The results obtained in this work suggest that ZnO/PPy can be promising coating materials for future applications of SPME and related sample preparation techniques.