数字离子阱质谱仪低质量截止值的改进方法

本研究在实验室自制的线形数字离子阱质量分析器上,通过改变数码电源的频率扫描方式,在CID过程中,通过扫描数字束缚方波电源的频率和数字激发方波的频率实现母体解离。例如对于利血平母体离子,当将离子数字束缚方波频率从500 kHz扫描到560 kHz,可以测量到低质荷比的碎片离子,成功实现了串级质谱分析的低质量碎片离子的分析。通过与利血平三重四极质谱串级质谱分析实验结果的比较,发现可以在数字离子阱质谱仪上获得与三重四极质谱相同的串级质谱测量结果。结果表明,本方法可以用于低质量离子的测量,克服了传统离子阱质谱进行串级质谱分析的一个主要难点,显著提高数字离子阱质谱的性能。     

甲硅烷的多光子电离

本文测量了SiH_4的(3+1)电离光谱。在激光波长428—458nm基本上是一个连续谱,在激光紫外区347—392nm,得到两个振动前进带组,并标识了一个位于363.5nm的谱带精细结构。用飞行时间质谱仪检测了碎片离子,没有观察到母体离子SiH_4~+,主要的产物离子是SiH_2~+和SiH_3~+,SiH_2~+和SiH_3~+离子产率的比值近似等于相同能量下的单光子电离结果,但Si~+的产率明显增加。在384—390nm范围的Si~+离子的光谱中比其它离子的光谱多出一些谱带,其增加的Si~+可能来自SiH_2~+和SiH~+离子的离解过程。     

小型离子阱的质量校正

各种野外环境的现场检测、现场诊断、流程监控、排放物检测与控制、突发事件的处理、尤其是化学和生物武器的检测等诸多需要现场使用质谱仪的场合都对质谱仪的小型化提出了迫切的要求。小型离子阱具有较高的灵敏度,可进行MS／MS实验,可利用离子-分子反应来识别特殊的化学基团,因而是小型质谱仪的重要质量分析器。本研究对小型离子阱的工作原理作了简要介绍,并以此为依据提出了进行小型离子阱质量校正的方法,推导了相关的公式,还成功地将其应用于自制的小型矩形离子阱质谱仪进行了质量校正,并指出该方法还可用于仪器RF等电学系统性能的检验。     

数字化矩形离子阱质谱仪的设计及性能

将数字化离子阱技术和矩形离子阱(RIT)技术相结合,建立了数字化矩形离子阱质谱仪.此技术和装置既具有数字化电源的结构简单、输出稳定和易精确控制等特点,又结合了矩形离子阱的高离子存储效率、结构简单以及加工和装配容易等优点.构建了基于电喷雾(ESI)电离源的数字化矩形离子阱质谱仪系统,并使用Fenfluramine和PPG2000分别对此系统的质量分辨率和质量范围进行了测试.研究结果表明:一个用印刷线路板(PCB)制作的简单矩形离子阱,在200 V(半峰值)的数字束缚电压的驱动下,获得了大于500的质量分辨率和超过2600 Th的质量范围.实验证明,数字化离子阱技术的应用可以显著提高矩形离子阱的性能,特别是质量范围等关键的质谱仪指标.     

超分辨傅里叶变换离子回旋共振质谱在石油进出口检验中的应用

傅立叶变换离子回旋共振质谱仪(FT-ICR MS)是一种超高质量分辨能力的质谱仪,能够精确质量确定石油的各种元素组成,真正从分子元素组成的层面上研究石油及其产品的成分。本文介绍了FT-ICR MS的原理和发展,展望了FT-ICR MS在石油检验中的应用。     

气相色谱矩形离子阱质谱联用仪的设计与性能

气相色谱离子阱质谱联用仪(GC-ITMS)广泛地应用于药物分析、环境分析、农药检测和食品分析、有机化学品分析、毒品分析以及医学和生物分析等领域。离子阱质谱作为色谱的检测器,决定了色质联用仪的分析性能,包括检出限、分辨率。离子阱质量分析器从传统的双曲型3D离子阱发展到2D线性离子阱,质量歧视效应得到了极大的改善,灵敏度得到了提高。矩形离子阱作为线性离子阱,结构简单,加工和装配容易,因此应用到GCMS系统中将具有非常大的优势。介绍了矩形离子阱质谱仪的设计方案、仪器整机的性能测试、质量分辨和质量歧视效应分析,与Agilent6890组成GCMS联用仪,对实际样品进行了分析。     

离子分子反应装置的建立及应用

本文报导离子分子反应装置的建成并测量了O~++N_2反应的速率常数k.O~+离子由微波放电和电极电离产生,经快速流动,用四极质谱仪检测到.中性分子N_2经支管进入流动管,并与O~+离子反应,在温度为298 K 时,测得该反应速率常数为k=(2.50±0.52)×10~(-12)cm~3·molec~(-1)·s~(-1)(T=298 K)     

用于团簇研究的激光反射式飞行时间质谱仪

报道了新建造的用于团簇研究的反射式飞行时间质谱仪,包括反射式飞行时间质谱仪的结构、原理、真空系统、控制系统等.初步性能测试表明:激光溅射/分子束载带型团簇离子源能够产生丰富的一元、二元团簇离子;质谱仪对离子的质量分辨接近2000,并且质量门也有较高的质量选择性.系统用于团簇研究,得到了一些初步实验结果.     

稳定图的测定与矩形离子阱质谱性能分析

从理论上讲, 离子阱质谱仪的性能是由阱内电场分布决定的,而电场分布又是由组成离子阱的电极几何结构和离子阱工作电压决定的. 对于矩形离子阱, 即使不考虑其几何结构的偏差, 其阱内的电场分布一般也很复杂. 在矩形离子阱内, 除四极电场外, 还包含多种成分的其他各种高阶场, 它们直接影响离子在阱内的运动轨迹和离子阱质谱的性能. 由于各种电场成分对离子阱内离子运动的影响非常复杂, 还很难从数学上给出精确的解析解, 使得目前从理论上还无法预测高阶场成分对质谱性能的影响. 本工作通过测定不同几何结构的矩形离子阱的稳定图, 从实验上比较了不同场半径, 即不同电场分布条件下的离子阱质谱性能的差别. 实验中, 通过改变离子阱的几何比例结构, 详细测定了不同结构的矩形离子阱的稳定图特征, 并与实验测得的质谱分析结果进行比较. 同时, 我们还详细介绍了矩形离子阱质谱的稳定图的测定方法, 并根据得到的不同情况下的稳定图结构分析了离子阱的质谱性能. 研究结果表明： 可以通过比较试验得到的稳定图结构来判断其离子阱质谱仪的性能如质量分辨能力等. 此外, 实验结果还发现： 对于y方向拉伸结构的矩形离子阱, 其实验绘制得到的是不完整的稳定图. 但根据稳定图边界的特点, 通过采用四极直流电压调制的方法, 可以对y方向拉伸结构的矩形离子阱的性能进行改善, 极大地提高了阱的质量分辨能力.     

一种新型光电离/微型正交加速飞行时间质谱仪的设计和性能测试

介绍了自行研制的光电离/微型正交加速飞行时间质谱仪的设计原理和性能。电离源采用光子能量为10.6 eV真空紫外灯,它可将待测分子电离只产生单电荷母体离子,不产生碎片离子。采用该光电离方法得到的质谱谱图比较简单,气体样品可以不经分离直接进行分析。离子正交引入结构的飞行时间质量分析器有效地提高了质谱分辨率。用32 cm无场飞行管,测量碘甲烷得到的质谱分辨率可达430。在谱图获得频率10 kHz的操作条件下,样品总分析时间20 s,得到苯和碘甲烷的检出限分别为10×10-6,5×10-6。软电离和微型化使得该质谱仪在可挥发性有机物的实时在线监测方面有广泛的应用。     

Mass spectrometry of natural organic phosphorus

This article provides a review of the use of modern mass spectrometry (MS) for quantitative and qualitative measurements of organic phosphorus compounds in nature. Included is a brief discussion of recent developments in large molecule mass spectrometry, focusing on time-of-flight (TOF) and ion cyclotron resonance (ICR) mass analysis techniques, as well as electrospray (ESI) and inductively coupled plasma (ICP) ionization. The use of ICP with high-resolution mass spectrometry for quantitative measurements of total phosphorus and as a detector coupled to HPLC and CE for defining organic phosphorus speciation is demonstrated using results from a study of phosphorus cycling in a treatment wetland. Qualitative identifications of individual phosphorus compounds by ultrahigh resolution Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) is demonstrated using dissolved organic phosphorus isolated from this same wetland.     

微波等离子体炬质谱直接分析水中镉的研究

建立了一种测量水中痕量镉的质谱电离新方法。以微波等离子体炬(MPT)为离子源,结合质谱仪器可直接分析水样而无需任何样品预处理。水样直接通过雾化器雾化形成气溶胶,气溶胶经加热冷却循环及浓硫酸干燥后,由MPT中心管道引入等离子体,产生的离子采用四极杆质谱仪(QMS)检测,得到镉的MPT特征质谱。根据镉的特征质谱进行定量分析。结果表明,114Cd的信号强度与溶液中镉离子浓度在300~3 000ng/L范围内呈良好线性关系,相关系数可达0.994 96,检出限(LOD)为72.7 ng/L。对实际水样(自来水、太湖湖水、赣州龙南井水、矿泉水)进行分析,加标回收率为90.6%~112.2%,10次测量的相对标准偏差(RSD,n=10)为7.1%~21.5%,单个样品测试可在2~3 min内完成。因此,MPT质谱法对水中有害金属镉的快速测量具有一定优势,作为传统ICP质谱检测的有力补充,可以发展成为在线分析方法,应用于环境水、生活水质量监控等领域。     

原位电离与小型质谱在公共安全领域的应用

质谱作为一种具有高准确度、高灵敏度、高选择性的检测仪器,在公共安全领域有着重要的应用前景。公共安全领域的需求主要涉及毒品、毒物、爆炸物等化学物质的现场快速检测,因其影响广泛,检测结果需非常准确。作为实验室分析仪器,质谱的准确性和速度能满足公共安全的应用需求,但作为现场快速检测的仪器仍需要一定改进。现场快速检测一方面要求检测仪器的小型化,另一方面要求样品前处理的简单化,以使整个检测流程可以无需专业人员来完成。对于检测仪器的小型化,小型质谱的开发在近20年得到了充分发展;对于样品前处理的简单化,研究者发明了原位电离技术,使得基质复杂的被分析物无需前处理即可进行质谱检测。该文首先介绍了原位电离技术的发展及其在公共安全领域的应用,特别是对解吸附电喷雾电离、实时直接分析电离、激光烧蚀电喷雾电离、纸喷雾电离与纸毛细管喷雾电离等典型原位电离技术的原理、性能及在公共安全领域的应用进行了详细介绍,并讨论了几种原位电离现场定量方法。然后,对原位电离小型质谱的发展进行了综述,从最初的小型化离子阱,到仅能检测可挥发有机物的小型质谱,再到可检测非挥发性物质的常规大气压电离源小型质谱,最后发展成为有原位电离源的小型质谱,历经20年的发展使得原位电离小型质谱得以出现和提升。并列举了原位电离小型质谱在毒品现场检测与吸毒人员排查、爆炸物现场侦察、食品安全之农用化学品检测、药物质量检查等公共安全领域的应用。最后,对原位电离小型质谱的发展进行了展望,指出原位电离与小型质谱相结合是小型质谱发展的必然趋势,未来需使用更加智能化的原位电离小型质谱,结合云数据平台,实现更方便广泛的应用。     

Chemical Analysis of Inorganic and Organic Surfaces and Thin Films by Static Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS)

By using mass spectrometry to analyze the atomic and molecular secondary ions that are emitted from a solid surface when bombarded with ions, one obtains detailed information about the chemical composition of the surface. A time-of-flight mass spectrometer is especially suitable for the analysis of secondary ions because of its high transmission, high mass resolution, and ability to detect ions of different masses simultaneously. By using a finely focused primary ion beam it is also possible to analyze microareas and generate surface images with a lateral resolution of 0.1 μm or less. Static time-of-flight secondary ion mass spectrometry (TOF-SIMS) allows monolayer imaging and local analysis of monolayers with high sensitivity, a wide mass range, high mass resolution, and high lateral resolution. Besides information on elements and isotopes, the technique yields direct information on the molecular level and can also be used to analyze surface species of high molecular mass that are thermally unstable and cannot be vaporized. The method can be applied to practically all types of materials and sample forms, including insulators in particular. In this article the basic principles of TOF-SIMS are explained, and its analytical capabilities for both large area and imaging applications are illustrated by examples. These include silicon surfaces (both uniform and structured), thermally unstable organic molecules on surfaces, synthetic polymers, and synthetically prepared molecular surface films, particles, and fibers. Emitted neutral particles can also be analyzed by postionization with a laser, and the possibilities of this technique are discussed.     

Inductively coupled plasma-mass spectrometry: Capabilities and applications

Researchers in the field of trace elements analysis are continuously in search of new instrumental solutions for obtaining better results in terms of analysis speed, precision, accuracy, detection power, and applicability to a wider range of analytical problems. One of the more recent innovations in this field is the inductively coupled plasma (ICP) source coupled with a mass spectrometry (MS). An ICP-MS system consists of an ICP torch which ionizes the species present and a mass spectrometer for the separation under vacuum of the different species. The main advantages of this technique with respect to graphite furnace atomic absorption spectrometry (GFAAS) and to ICP atomic emission spectrometry (ICP-AES) are: (a) detection limits better than those obtained with graphite furnace, i.e., down to the ng g⁻¹ level, due to the high sensitivity of the channel electron multiplier, which transforms the mass of each ion into an electric signal; (b) the possibility of detecting refractory elements, lanthanides, and all the other elements including halogens, C, and S; (c) high analysis speed (up to 90 elements in 5 min) due to the velocity of the quadrupole mass spectrometer in selecting different masses with respect to the speed necessary to scan different wavelengths; (d) spectral simplicity, because spectra have peaks only at the mass of each isotope and all elements have at least one isotope free from spectral overlap of other analytes; (e) capability of determining individual isotopes of each element. The instrument, therefore, allows not only quantitative elemental analyses to be carried out, but also semiquantitative assays of all the elements present and isotopic ratio analyses to determine quantitatively two or more isotopes of the same element. The most interesting application fields of this technique are in environmental chemistry, geochemistry, oil chemistry, technology of semiconductors, and biochemistry.     

Measurement and Visualization of Mass Transport for the Flowing Atmospheric Pressure Afterglow (FAPA) Ambient Mass-Spectrometry Source

Ambient desorption/ionization mass spectrometry (ADI-MS) has developed into an important analytical field over the last 9 years. The ability to analyze samples under ambient conditions while retaining the sensitivity and specificity of mass spectrometry has led to numerous applications and a corresponding jump in the popularity of this field. Despite the great potential of ADI-MS, problems remain in the areas of ion identification and quantification. Difficulties with ion identification can be solved through modified instrumentation, including accurate-mass or MS/MS capabilities for analyte identification. More difficult problems include quantification because of the ambient nature of the sampling process. To characterize and improve sample volatilization, ionization, and introduction into the mass spectrometer interface, a method of visualizing mass transport into the mass spectrometer is needed. Schlieren imaging is a well-established technique that renders small changes in refractive index visible. Here, schlieren imaging was used to visualize helium flow from a plasma-based ADI-MS source into a mass spectrometer while ion signals were recorded. Optimal sample positions for melting-point capillary and transmission-mode (stainless steel mesh) introduction were found to be near (within 1 mm of) the mass spectrometer inlet. Additionally, the orientation of the sampled surface plays a significant role. More efficient mass transport resulted for analyte deposits directly facing the MS inlet. Different surfaces (glass slide and rough surface) were also examined; for both it was found that the optimal position is immediately beneath the MS inlet.

Electron Transfer Dissociation Mass Spectrometry of Hemoglobin on Clinical Samples

A mass spectrometry-based assay combining the specificity of selected reaction monitoring and the protein ion activation capabilities of electron transfer dissociation was developed and employed for the rapid identification of hemoglobin variants from whole blood without previous proteolytic cleavage. The analysis was performed in a robust ion trap mass spectrometer operating at nominal mass accuracy and resolution. Subtle differences in globin sequences, resulting with mass shifts of about one Da, can be unambiguously identified. These results suggest that mass spectrometry analysis of entire proteins using electron transfer dissociation can be employed on clinical samples in a workflow compatible with diagnostic applications.     

电感耦合等离子体质谱技术最新进展

对1998年以来电感耦合等离子体质谱技术（ICP－MS）的最新进展作一简要回顾。内容包括同位素比值分析、双聚焦扇形磁场高分辨ICP－MS、多接收器磁扇形等离子体质谱仪（MC－ICP－MS）、飞行时间等离子体质谱仪（ICP－TOF－MS）、“冷”等离子体及屏蔽炬技术以及动态碰撞／反应池技术等进展。     

A Novel 9.4 Tesla FTICR Mass Spectrometer with Improved Sensitivity,Mass Resolution,and Mass Range

Fourier transform ion cyclotron resonance (FTICR) mass spectrometry provides unparalleled mass measurement accuracy and resolving power. However, propagation of the technique into new analytical fields requires continued advances in instrument speed and sensitivity. Here, we describe a substantial redesign of our custom-built 9.4 tesla FTICR mass spectrometer that improves sensitivity, acquisition speed, and provides an optimized platform for future instrumentation development. The instrument was designed around custom vacuum chambers for improved ion optical alignment, minimized distance from the external ion trap to magnetic field center, and high conductance for effective differential pumping. The length of the transfer optics is 30% shorter than the prior system, for reduced time-of-flight mass discrimination and increased ion transmission and trapping efficiency at the ICR cell. The ICR cell, electrical vacuum feedthroughs, and cabling have been improved to reduce the detection circuit capacitance (and improve detection sensitivity) 2-fold. The design simplifies access to the ICR cell, and the modular vacuum flange accommodates new ICR cell technology, including linearized excitation, high surface area detection, and tunable electrostatic trapping potential.