共查询到17条相似文献,搜索用时 171 毫秒
1.
高层双塔楼绕流风场效应的数值预测 总被引:1,自引:0,他引:1
在一高层双塔楼静力风载风洞试验的基础上,采用时均数值模拟的方法,对其绕流风场进行了模拟,获得了风场的绕流特点和塔楼表面风压的分布规律.通过风压的模拟计算值与试验值的比较,表明以数值方法预测气动干扰强烈的绕流风场是准确和可行的. 相似文献
2.
两个相邻建筑物周围风环境的数值模拟 总被引:9,自引:0,他引:9
高层建筑物及其群体周围所引起的风环境问题正日益受到人们的重视。本文用数值模拟方法对两幢串列布置高层建筑周围的流场进行了模拟,讨论了建筑物高度、间距比等因素对风环境特性的影响。为了与两个相邻建筑物的流场进行比较,本文同时计算了单个建筑物周围流动的分布情况。数值模拟结果对揭示高层建筑群区域内再生风载荷的形成机理提供了一定的分析方法,为城市规划和高层建筑住宅小区设计提供了一定的理论参考和依据。 相似文献
3.
建筑风载的数值模拟及其在微机上的实现 总被引:1,自引:1,他引:1
本文以Reynolds时匀方程为基础,运用一种扩展k-ε湍流模型对建筑物在近地区作用下的表面风压进行了数值模拟。利用NDP FORTRAN优化编译器在微机上实现了三维问题的模拟计算,对模拟程序的主要模块进行了剖析。文中对-55m高矩形横截面建筑物的表面风压进行了实例计算,计算的风压值与标准k-ε模型的相应值以及边界层风洞试验的测试值作了比较。 相似文献
4.
5.
高层建设风压试验研究 总被引:2,自引:0,他引:2
通过缩尺比为1:300的模型风洞测压试验,研究了在16个来流风向下某高层建筑表面的风压分布,结合当地的气象风速资料,给出了50年重现期风速下的最大风荷载分布,为该建筑的设计提供了风荷载依据。 相似文献
6.
7.
8.
利用Fluent软件对超大瘦高型冷却塔的风荷载进行了CFD数值模拟,获得冷却塔外表面的三维流场特性和风压系数分布曲线,并与规范数据进行比较,以验证数值模拟的准确性;利用CFD动网格研究风振条件下冷却塔内外壁的风压分布。结果表明:考虑风振特性后,冷却塔外壁风压呈现增大的趋势,最大负压位置即流动分离点在考虑风振时产生了滞后;对于本文研究的上下开口结构而言,在考虑风振作用后内部风压系数的绝对值整体偏大,且内部高压区的位置发生了变化;不考虑风振时内部风压高压区发生在接近塔底的区域,而考虑风振特性后,内部风压高压区发生在接近塔顶的区域。这说明风振在一定程度上改变了冷却塔内部风压的分布。 相似文献
9.
10.
《计算力学学报》2016,(2)
针对风敏感结构折叠网壳存在抗风不利区域和风压梯度变化较大的力学行为,为优化其在风荷载作用下的表面风压分布,降低结构的风致响应,基于流体动力学基本原理和大气边界层基本理论,运用Fluent软件对折叠网壳结构风压分布进行数值模拟的基础性研究,对比风洞试验结果,确定复杂体型结构数值模拟的计算域尺寸、计算域离散和湍流模型等关键参数的选取。在此基础上对8种折叠网壳结构形状优化方案进行分析,得到其分区体型系数和体型系数的标准差,对比结构初始形态表面风压,最终得到具有良好抗风性能的最优方案,化解了结构的不利风压分布。结果表明,CFD数值分析技术能够有效地解决风敏感结构在风荷载作用下的形状优化问题,为结构体型优化和研发新型野营房屋提供了一个设计方法和理论依据。 相似文献
11.
12.
13.
14.
It is assumed in this paper that for a high Reynolds number nearly homogeneouswind flow, the Reynolds stresses are uniquely related to the mean velocity gradientsand the two independent turbulent scaling parameters k and E. By applying dimensionalanalysis and owing to the Cayley-Hamilton theorem for tensors, a new turbulenceenclosure model so-called the axtended k-ε model has been developed. The coefficientsof the model expression were detemined by the wind tunnel experimental data ofhomogeneous shear turbulent flow. The model was compared with the standard k-εmodel in in composition and the prediction of the Reynold’s normal Stresses. Using thenew model the numerical simulation of wind flow around a square cross-section tallbuilding was performed. The results show that the extended k-ε model improves theprediction of wind velocities around the building the building and wind pressures on the buildingenvelope. 相似文献
15.
16.
利用POD对双坡屋盖风压场预测 总被引:1,自引:0,他引:1
本文利用本征正交分解(POD)方法对双坡屋盖未布置测压点位置的风压时间序列进行了预测。采用线性插值及双线性插值得到预测点位置上的本征模态值。结构由原风压场协方差分析得到的主坐标和上述新本征模态值获得未布置测压点位置的风压时间序列。通过在时间域和频率域内比较预测出的风压与实测风压说明了POD在预测双坡屋盖风压场的有效性。 相似文献
17.
Simulation of the aerodynamics of buildings and structures by means of the closed vortex loop method
Problems of the numerical simulation of the air flow past buildings and structures are considered using the closed vortex loop method. A mathematical model, based on the vortex approach, of the time-dependent ideal incompressible fluid flow past a system of bodies is proposed. A numerical scheme for solving the problem and an algorithm for calculating the distributed wind loads over the body surface are outlined. An example of calculating the aerodynamic loads is given for a real building and the results are compared with the known results of testing a model of the building in a wind tunnel. An example of the calculation and analysis of the wind distribution over a system of several buildings is also presented. 相似文献