Modelling the effects of nitrogen doping on the carbon nanofiber growth via catalytic plasma‐enhanced chemical vapour deposition process

An analytical model is developed to describe the effects of nitrogen doping on the growth of the carbon nanofibers (CNFs) and to elucidate the growth mechanism of nitrogen‐contained carbon nanofibers (N‐CNFs) on the catalyst substrate surface through the plasma‐enhanced chemical vapour deposition (PECVD) process. The analytical model accounts for the charging of CNFs, kinetics of all plasma species (electrons, ions, and neutrals) in the reactive plasma, generation of carbon species on the catalyst nanoparticle surface due to dissociation of hydrocarbons, CNF growth due to diffusion and precipitation of carbon species, and various other processes. First‐order differential equations have been solved for glow discharge plasma parameters for undoped CNFs (CNF growth in C₂H₂/H₂ plasma) and nitrogen‐doped CNFs (N‐CNF growth in C₂H₂/NH₃ plasma). Our investigation found that nitrogen‐doped CNFs exhibit lower tip diameters and smaller heights compared to the undoped CNFs. In addition, we have estimated that nitrogen‐doped CNFs have more enhanced field emission characteristics than the undoped CNFs. Moreover, we have also observed that N‐CNFs' growth rate increases and tip diameter decreases as the C₂H₂/NH₃ gas ratio decreases. The theoretical results of the present investigation are consistent with the existing experimental observations.     

Enhanced soft X-ray emission from carbon nanofibers irradiated with ultra-short laser pulses

A comparative experimental study of the X-ray emission in the water-window spectral region has been performed using carbon nanofibers (CNFs) of different sizes and graphite plate targets, irradiated with ultra-short (Ti:sapphire) laser pulses. More than an order of magnitude enhancement in the X-ray yield is observed from CNFs of 60-nm diameter with respect to graphite targets. The X-ray emission from CNFs of 160-nm diameter was also high. The integrated X-ray yield of these carbon-based targets scales with the laser intensity (I _L) as I_L ^{~ 1.3-1.4}I_{\mathrm{L}}^{\sim 1.3-1.4} in the intensity range of 4×10¹⁶–4×10¹⁷ W/cm². The effect of the laser pulse duration on the X-ray emission from the CNFs was also studied by varying the pulse duration from 45 fs up to 3 ps at a constant fluence of 2×10⁴ J/cm². The optimum laser pulse duration for maximum X-ray emission increases with the diameter of the CNFs used. The results are explained from physical considerations of heating and hydrodynamic expansion of the CNF plasma in which resonance field enhancement takes place while passing through two times the critical density. The results add to the efforts towards achieving an efficient low-cost water-window X-ray source for microscopy.     

Electrospun one-dimensional graphitic carbon nitride-coated carbon hybrid nanofibers (GCN/CNFs) for photoelectrochemical applications

Coupling of graphitic carbon nitride (GCN) with electrospun carbon nanofibers (CNFs) enhanced the photoelectrochemical (PEC) performance of a pristine GCN photoanode. Polyacrylonitrile (PAN) was electrospun to form fibers that were then carbonized to form one-dimensional (1D) CNFs, which were then used to fabricate the GCN structure. The optimum GCN/CNFs hybrid structure was obtained by controlling the amount of GCN precursors (urea/thiourea). The surface morphology of the hybrid structure revealed the coating of GCN on the CNFs. Additionally, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction confirmed the phases of the GCN/CNFs hybrids. PEC results showed a higher photocurrent of 3 μA for the hybrid compared with that of 1 μA for the pristine GCN. The high photocurrent for the hybrid structures indicated the formation of heterojunctions that resulted from a lower recombination rate of charge carriers. Moreover, UTh_0.075 (0.075 g of urea and 0.075 g of thiourea) hybrid sample showed the highest performance of hydrogen generation with its numerical value of 437 μmol/g, compared to those of UTh_0.1(0.1 g of urea and 0.1 g of thiourea) and UTh_0.05 (0.05 g of urea and 0.05 g of thiourea) composite samples. This higher hydrogen production could be explained again with successful formation of heterojunctions between GCN and CNFs. Overall, we report a new approach for obtaining 1D hybrid structures, having better PEC performance than that of pristine GCN. These hybrids could potentially be used in energy-related devices.     

Exploring the mechanism of NO–C2H4 reactions on the surface of stepped Pt(3 3 2)

Fourier transform infra red reflection–absorption spectroscopy (FTIR-RAS), thermal desorption spectroscopy (TDS), and auger electron spectroscopy (AES), were employed to explore the mechanism of NO reduction in the presence of C₂H₄ on the surface of stepped Pt(3 3 2). Both NO–Pt and C₂H₄–Pt interactions are enhanced when NO and C₂H₄ are co-adsorbed on Pt(3 3 2). As a result, C₂H₄ is dissociated at surface temperatures as low as 150 K, and the N–O stretch band is weakened. The presence of post-exposed C₂H₄ leads NO desorption from steps to decrease significantly, but the same effect on NO desorption from terraces becomes appreciable only at higher post-exposures of C₂H₄, e.g., 0.6 L and 1.2 L, and proceeds to a much slighter extent. Auger spectra indicate that as a result of the reaction with O from NO dissociation, the amount of surface C species is greatly reduced when NO is post-exposed to a C₂H₄ adlayer. It is concluded that reduction of NO in the presence of C₂H₄ proceeds very effectively on the surface of the Pt(3 3 2), through a mechanism of NO dissociation and subsequent O removal. Following this mechanism, the significant dissociation of adsorbed NO molecules on steps at surface temperatures below 400 K, and subsequent rapid reaction between the resultant O and C-related species, accounts for the considerable amount of N₂ desorption at temperatures below 400 K.     

Stabilized aqueous dispersion of multi-walled carbon nanotubes obtained by RF glow-discharge treatment

This article reports a method for surface modification of multi-walled carbon nanotubes (MWNTs) using a low-pressure capacitively coupled RF glow-discharge. Ar/C₂H₆ and Ar/C₂H₆/O₂ gaseous mixtures were used to produce non-polar (np-) and polar (p-) coatings, respectively, onto MWNTs. After 5 min of plasma treatment at 20 W and 20 torr, strongly hydrophobic and non-electrically conductive np-MWNTs were produced. The p-MWNTs were strongly hydrophilic and showed no measurable hydrophobic recovery 2 weeks after treatment. Aqueous suspensions of p-MWNTs remained stable and free of agglomerates after being boiled. The ζ-potential of p-MWNT nanofluids was −40.3 mV, indicating a highly stable dispersion.     

Preparation of carbon aerogel in ambient conditions for electrical double-layer capacitor

Carbon aerogels were prepared by polycondensation of resorcinol with formaldehyde using sodium carbonate as a catalyst in ambient conditions, and they were used as an electrode of electrical double-layer capacitor. The effect of resorcinol to catalyst ratio (R/C ratio) on volume shrinkage, BET surface area, and electrochemical property of carbon aerogels was investigated by changing R/C ratio from 50 to 2000. In order to minimize volume shrinkage, solvent exchange was performed with acetone at 50 °C for 1 day. Volume shrinkage was <2% after 2-day gelation in the absence of CO₂ supercritical drying. BET surface area was strongly dependent on R/C ratio. Carbon aerogel prepared at R/C ratio of 500 showed the highest BET surface area (706 m²/g) with average pore diameter of 10.9 nm. Electrochemical property of carbon aerogels as an electrode of electrical double-layer capacitor was investigated by cyclic voltammetry measurement. Specific capacitance of carbon aerogel prepared at R/C ratio of 500 was found to be 81 F/g in 1 M H₂SO₄ electrolyte at the scan rate of 10 mV/s.     

Electrochemical activities of Pt-Ru-Co and Pt-Ru-Ni electrocatalysts supported by a carbon fiber web

Dynamic cyclic voltammetry is performed as functions of cycle number and potential window for the electrodeposition of Pt-Ru-Co and Pt-Ru-Ni catalysts on a carbon fiber (CF) web. Surface morphologies of the electrodeposited catalysts are observed by a scanning electron microscope. The electrochemical activity in methanol oxidation is examined by the cyclic voltammetry using a mixed aqueous solution of methanol as an electrolyte component. As the cycle number increases, both the current density and the amount of the electrodeposited metallic particles on the CF web are increased. The Pt-Ru-Ni/CF catalyst prepared in the potential range of −0.6 to 0.2 V and from the 1:2:2 mixed solution of H₂PtCl₆, RuCl₃·3H₂O, and Ni(NO₃)₂·6H₂O, respectively, shows the higher current density, corresponding to the higher catalytic activity.     

Room-temperature growth of carbon nanofibers induced by Ar+-ion bombardment

Glassy carbon plates, a Ni mesh coated with a carbon film and mechanically polished graphite plates were Ar⁺ ion-bombarded with and without a simultaneous Mo supply at room temperature. Conical protrusions were formed on the sputtered surfaces, and in some cases carbon nanofibers (CNFs) 0.2–10 μm in length and 10–50 nm in diameter grew on the tips. The growth of CNF-tipped-cones was optimized in terms of the ion-incidence angle and the rate-ratio of sputtering and seeding. Oblique sputtering was proved to be quite effective to grow the CNF-tipped-cones. Thus, the redeposited massive carbon atoms onto cones were thought to diffuse toward the cone tips, resulting in CNF formation. This growth mechanism was confirmed by transmission electron microscope (TEM) observation disclosing the boundary-less structure between conical bases and CNFs. TEM observation of CNF-tipped-cones also revealed no-hollow structure and an amorphous nature of CNFs. Since this sputtering method is a room-temperature process and quite straightforward, ion-induced CNFs promise to have myriad applications, such as field emission sources for flat panel displays.     

Synthesis of coiled carbon nanotubes on Co/Al2O3 catalysts in a fluidised-bed

Mixtures of regularly coiled and straight multi-walled carbon nanotubes (MWNTs) were synthesised on alumina supported Co catalysts prepared by pH controlled, wet impregnation. The synthesis reaction was performed under C₂H₂:H₂:N₂ at 750 °C in a fluidised-bed for 30 min. Scanning electron microscopy/energy dispersive X-ray spectroscopy shows good distribution of the active Co particles on the surface of the alumina support. Determined from 10 individual SEM images from the same product batch, the CNTs present are typically from 10 to 40 nm in diameter. Thermogravimetric analysis (TGA) and Raman spectroscopy indicate the total oxidative weight loss is independent of pH during catalyst preparation. This study is the first to report the use of a fluidised-bed for the synthesis of coiled MWNTs, using alumina supported Co catalysts.     

Functionalization of carbon nanofibers with elastomeric block copolymer using carbodiimide chemistry

Surface functionalization of carbon nanofibers (CNFs) with aminopropyl terminated polydimethylsiloxane [(PDMS-NH₂)] and other organic diamines was achieved using carbodiimide chemistry. The carbodiimide chemistry provides faster reaction rate so that the reaction occurs at lower temperature compared to amidation and acylation-amidation chemistry. CNF functionalized with PDMS-NH₂ fibers were further functionalized with oligomer of polyimide (6FDA-BisP) using imidization reaction. The formation of block copolymer on the surface of CNF is proposed as an effective method to engineer the interphase between the fiber and the polymer, which is essential to modulate and enhance the properties of the nanocomposite. The efficiency of the carbodiimide chemistry to functionalize amine terminated groups on CNF and the functionalization of block copolymer was characterized using thermal gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy.     

First-principles studies of H2S adsorption and dissociation on metal surfaces

Density functional theory calculations were employed to investigate the molecular and dissociative adsorption of H₂S on the closed packed surfaces of a number of important noble metals (Ag(1 1 1), Au(1 1 1) and Cu(1 1 1)) and transition metals (Ir(1 1 1), Ni(1 1 1), Pd(1 1 1) and Pt(1 1 1)). Energy minima corresponding to adsorbed states were identified with H₂S binding preferentially at the top sites. The adsorption of other S moieties (SH and S) was also examined. SH and S were found to prefer bridge sites and hollow sites, respectively. The binding of H₂S and its S-containing dissociated species is stronger on the transition metals. The elementary reactions of abstraction of H from H₂S to form a surface SH intermediate and abstraction of H from SH to form a surface S intermediate as model pathways for the dissociation of H₂S were examined. Our results suggest that H₂S decomposition on the aforementioned transition metal surfaces is more facile, both thermodynamically and kinetically.     

Controlling the properties of silver nanoparticles deposited on surfaces using supercritical carbon dioxide for surface-enhanced Raman spectroscopy

Silver nanoparticles (AgNPs) have been deposited on silicon and glass surfaces via a supercritical carbon dioxide (sc-CO₂) synthesis route for application in surface-enhanced Raman spectroscopy (SERS). Arrhenius plots revealed that nucleation and growth processes in this system depend on both temperature and surface chemistry. Results also demonstrated that temperature and surface chemistry could be varied to control nanoparticle properties, such as the mean nanoparticle size, density, and surface coverage, providing two useful variables for manipulating the properties of AgNPs deposited on surfaces in this system. These data also provide scientific insight into the underlying mechanisms governing heterogeneous AgNP deposition on a substrate in a sc-CO₂ system in addition to engineering insight into the variables that can be used to manipulate AgNP characteristics. The mean particle size could be tuned over the range 20–200 nm, the interparticle distance could be tuned over the range 70 nm–1 μm, and the surface coverage could be tuned over the range 0.035–0.58. Products were analyzed by scanning electron microscopy with image analysis, transmission electron microscopy, X-ray diffraction, and SERS. The silver nanoparticle-coated substrates were successfully applied in SERS, detecting the model analyte Rhodamine 6G at a concentration of 1 μM, a three orders of magnitude improvement over SERS surfaces previously fabricated in sc-CO₂ systems. Such surfaces can find use in trace concentration analyte detection in biomedical, chemical, and environmental applications.     

LEED and thermal desorption studies of small molecules (H2, O2, CO,CO2, NO,C2H4, C2H2 and C) chemisorbed on the stepped rhodium (755) and (331) surfaces

The chemisorption of H₂, O₂, CO, CO₂, NO, C₂H₂, C₂H₄ and C has been studied on the clean stepped Rh(755) and (331) surfaces. Low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and thermal desorption spectroscopy (TDS) were used to determine the size and orientation of the unit cells, desorption temperatures and decomposition characteristics for each adsorbate. All of the molecules studied readily chemisorbed on both stepped surfaces and several ordered surface structures were observed. The LEED patterns seen on the (755) surface were due to the formation of surface structures on the (111) terraces, while on the (331) surface the step periodicity played an important role in the determination of the unit cells of the observed structures. When heated in O₂ or C₂H₄ the (331) surface was more stable than the (755) surface which readily formed (111) and (100) facets. In the CO and CO₂ TDS spectra a peak due to dissociated CO was observed on both surfaces. NO adsorption was dissociative at low exposures and associative at high exposures. C₂H₄ and C₂H₂ had similar adsorption and desorption properties and it is likely that the same adsorbed species was formed by both molecules.     

Adsorption of organic molecules by photochemical reaction on Cl:Si(1 1 1) and H:Si(1 1 1) evaluated by HREELS

The covalent attachment of alkyl groups to silicon surfaces, via carbon-silicon bond formation, has been attempted using gas-surface reactions starting from Cl-terminated Si(1 1 1) or H:Si(1 1 1) under ultraviolet light irradiation. The formation of Cl-terminated Si(1 1 1) and its resulting stability were examined prior to deposition of organic molecules. High-resolution electron energy loss spectroscopy (HREELS) was utilized for detecting surface-bound adsorbates. The detection of photo-deposited organic species on Cl:Si(1 1 1) from gas-phase CH₄ or CH₂CH₂ was not significant. On H:Si(1 1 1), it was evident that after the photoreaction with gas-phase C₂H₅Cl, C₂H₅ groups were chemically bonded to the surface Si atoms through single covalent bonds. The C₂H₅ groups were thermally stable at temperatures below 600 K. Alkyl monolayers prepared on silicon surfaces by dry process will lead to a new prospective technology of nanoscale fabrication and biochemical applications.     

Exciton dynamics at interfaces of organic semiconductors

We review recent progress of using time-resolved two-photon photoelectron spectroscopy (2PPE) to study the energetics and dynamics of excitons at surfaces and interfaces of two prototypical organic semiconductors: C₆₀ and pentacene. For C₆₀ thin films epitaxially grown on Au(1 1 1) and Cu(1 1 1) surfaces, we observe both charge transfer and exciton states. For excitons in C₆₀, the proximity of a metal surface leads to rapid, exciton band-mediated quenching. At the surface of pentacene thin films we observe a series of charge-transfer excitons where the electron and the photohole are bound across the interface. The ability of 2PPE to measure and directly relate exciton levels to single-electron levels is illustrated.     

Carbon nanotubes grown on electrospun polyacrylonitrile-based carbon nanofibers via chemical vapor deposition

Carbon nanotubes (CNTs) grown on electrospun polyacrylonitrile-based carbon nanofibers (CNFs) via chemical vapor deposition were studied in this paper. Analyses of Raman spectra and X-ray diffraction patterns revealed that incorporation of CNTs could improve the crystalline and structure integrity of the obtained CNFs/CNTs composite. About 7.4 wt% of CNTs were grown on the electrospun CNFs confirmed by thermal gravimetric analysis. The electrochemical results showed that the surface activity and the cycle retention of the CNFs/CNTs composite were enhanced due to its three-dimensional nanostructure, enhanced pore distribution, and good conductivity. The CNFs/CNTs composite offers a great potential for high-performance lithium-ion batteries as the electrode.     

Adsorption of carbon monoxide,oxygen, hydrogen,nitrogen, ethylene and benzene on an iridium (110) surface; Correlation with other iridium crystal faces

The interaction of CO, O₂, H₂, N₂, C₂H₄ and C₆H₆ with an Ir(110) surface has been studied using LEED, Auger electron spectroscopy and flash desorption mass spectroscopy. Adsorption of oxygen at 30°C produces a (1× 2) structure, while a c(2 × 2) structure is formed at 400°C. Two peaks have been detected in the thermal desorption spectrum of oxygen following adsorption at 30°C. The heat of adsorption of hydrogen is slightly higher on Ir(110) than on Ir(111). Adsorption of carbon monoxide at 30°C produces a (2 × 1) surface structure. The main CO desorption peak is found around 230, while two other desorption peaks are observed around 340 and 160°C. At exposures between 250 and 500°C carbon monoxide adsorption yields a c(2 × 2) structure and a desorption peak around 600°C. Carbon monoxide is adsorbed on an Ir(110) surface partly covered with oxygen or carbon in a new binding state with a significantly higher desorption temperature than on the clean surface. Adsorption of nitrogen could not be detected on either clean or on carbon covered Ir(110) surfaces. The hydrocarbon molecules do not form ordered surface structures on Ir(110). The thermal desorption spectra obtained after adsorption of C₆H₆ or C₂H₄ are similar to those reported previously for Ir(111) consisting mostly of hydrogen. Heating the (110) surface above 700°C in the presence of C₆H₆ or C₂H₄ results in the formation of an ordered carbonaceous overlayer with (1 × 1) structure. The results are compared with those obtained previously on the Ir(111) and Ir(755) or stepped [6(111) × (100)] surfaces. The CO adsorption results are discussed in relation to data on similar surfaces of other Group VIII metals.     

Carbon molecular sieves from carbon cloth: Influence of the chemical impregnant on gas separation properties

Carbon materials with molecular sieve properties (CMS) were prepared by pyrolysis of cotton fabrics by chemical activation procedures. To evaluate the changes in the chemical and textural properties, the impregnants AlCl₃, ZnCl₂ and H₃PO₄ were used at 1123 K. The materials were characterized using adsorption of nitrogen and carbon dioxide, TPD, and immersion calorimetry in C₆H₆. Adsorption kinetics of O₂, N₂, CO₂, CH₄, C₃H₈ and C₃H₆ were measured in all the prepared materials to determine their behaviour as molecular sieves. The results confirm that the chemical used as impregnant has a significant effect on the resulting CMS separation properties. All materials exhibit microporosity and low oxygen surface group contents; however, the sample impregnated with zinc chloride, with an immersion enthalpy value of 66.4 J g⁻¹ in benzene, exhibits the best performance in the separation of CH₄-CO₂ and C₃H₈-C₃H₆ at 273 K.     

Redox reactions and inward cationic diffusion in glasses caused by CO and H2 gases

We find that inward diffusion of network-modifying cations can occur in an iron-containing silicate glass when it is heat-treated in CO/CO₂ (98/2 v/v) or H₂/N₂ (1/99 v/v) gases at temperatures around the glass transition temperature. The inward diffusion is caused by the reduction of ferric to ferrous ions and this diffusion leads to formation of a silica-rich surface layer with a thickness of 200–600 nm. The diffusion coefficients of the network-modifying divalent cations are calculated and they are different for the glasses treated in the CO and H₂ gases. At the applied partial pressures of CO and H₂, the H₂-bearing gas creates the silica-rich layer more effectively than the CO-bearing gas. The layer increases the hardness and chemical durability of the glass due to the silica network structure in the surface layer.     

Single-pulse shock-tube study on the pyrolysis of small esters (ethyl and propyl propanoate,isopropyl acetate) and methyl isopropyl carbonate

Single-pulse shock-tube experiments were used to study the thermal decomposition of selected oxygenated hydrocarbons: Ethyl propanoate (C₂H₅OC(O)C₂H₅; EP), propyl propanoate (C₃H₇OC(O)C₂H₅; PP), isopropyl acetate ((CH₃)₂HCOC(O)CH₃; IPA), and methyl isopropyl carbonate ((CH₃)₂HCOC(O)OCH₃; MIC) The consumption of reactants and the formation of stable products such as C₂H₄ and C₃H₆ were measured with gas chromatography/mass spectrometry (GC/MS). Depending on the considered reactant, the temperatures range from 716–1102 K at pressures between 1.5 and 2.0 bar. Rate-coefficient data were obtained from first-order analysis. All reactants primarily decompose by six-center eliminations: EP → C₂H₄ + C₂H₅COOH (propionic acid); PP → C₃H₆ + C₂H₅COOH; IPA → C₃H₆ + CH₃COOH (acetic acid); MIC → C₃H₆ + CH₃OC(O)OH (methoxy formic acid). Experimental rate-coefficient data can be well represented by the following Arrhenius expressions: k(EP → products) = 10^13.49±0.16 exp(−214.95±3.25 kJ/mol/RT) s⁻¹; k(PP → products) = 10^12.21±0.16 exp(–191.21±2.79 kJ/mol/RT) s⁻¹; k(IPA → products) = 10^13.10±0.31 exp(–186.38±5.10 kJ/mol/RT) s⁻¹; k(MIC → products) = 10^12.43±0.29 exp(–165.25±4.46 kJ/mol/RT) s⁻¹. The determination of rate coefficients was based on the amount of C₂H₄ or C₃H₆ formed. The potential energy surface (PES) of the thermal decomposition of these four reactants was determined with the G4 composite method. A master-equation analysis was conducted based on energies and molecular properties from the G4 computations. The results indicate that the length of a linear alkyl substituent does not significantly influence the rate of six-center eliminations, whereas the change from a linear to a branched alkyl substituent results in a significant reactivity increase. The comparison between rate-coefficient data also shows that alkyl carbonates have higher reactivity towards decomposition by six-center elimination than esters. The results are discussed in in the context of reactivity patterns of carbonyl compounds.