A compact dual‐band zeroth‐order resonator antenna loaded with meander line inductor

A novel zeroth‐order resonator (ZOR) meta‐material (MTM) antenna with dual‐band is suggested using compound right/left handed transmission line as MTM. In this article, suggested antenna consists of patch through series gap, two meander line inductors, and two circular stubs. The MTM antenna is compact in size which shows dual‐band properties with first band centered at 2.47 GHz (2.05‐2.89 GHz) and second band is centered at 5.9 GHz (3.70‐8.10 GHz) with impedance bandwidth of (S₁₁ < ? 10 dB) 34.69% and 72.45%, respectively. At ZOR mode (2.35 GHz), the suggested antenna has overall dimension of 0.197λ_o × 0.07λ_o × 0.011λ_o with gain of 1.65 dB for ZOR band and 3.35 dB for first positive order resonator band which covers the applications like Bluetooth (2.4 GHZ), TV/Radio/Data (3.700‐6.425 GHz), WLAN (5‐5.16 GHz), C band frequencies (5.15‐5.35, 5.47‐5.725, or 5.725‐5.875 GHz) and satellite communication (7.25‐7.9 GHz). The radiation patterns of suggested structure are steady during the operating band for which sample antenna has been fabricated and confirmed experimentally. It exhibits novel omnidirectional radiation characteristics in phi = 0° plane with lower cross‐polarization values.     

A wideband compact horizontally polarized omnidirectional antenna for 2G/3G/LTE

A compact horizontally polarized omnidirectional slot antenna with a wide working band is presented in this article. The proposed antenna consists of 4 shorter driven cross‐shaped slots, 4 longer parasitic cross‐shaped slots, and a feeding network. Four shorter slots, placed on the same side of a circular substrate, are fed by a feeding network printed on the other side with uniform phase and magnitude. To enhance the bandwidth of the antenna, 4 longer cross‐shaped slots are inserted between adjacent longer slots to produce an additional resonant frequency. All 8 slot radiators placed symmetrically along the circumference results in an omnidirectional horizontal polarized radiation pattern. By utilizing cross‐shaped slots, a compact size of 0.53λ_L × 0.53λ_L × 0.005λ_L (λ_L is the free space wavelength at the lowest operational frequency) is achieved. The prototype of the proposed antenna is fabricated and measured. The measured results reasonably agree with the simulated results. The measured working band for |S₁₁|<–10dB is from 1.62 to 2.81 GHz which successfully covers the 1.7 to 2.7 GHz 2G/3G/LTE bands. The measured gain variation in azimuthal angle is <1.7 dB within 1.7 to 2.7 GHz, and the cross polarization level is <–27 dB in the horizontal plane.     

A vertex‐fed hexa‐band frequency reconfigurable antenna for wireless applications

Present article embodies the design and analysis of an octagonal shaped split ring resonator based multiband antenna fed at vertex for wireless applications with frequency‐band reconfigurable characteristics. The proposed antenna is printed on FR4 substrate with electrical dimension of 0.4884 λ × 0.4329 λ × 0.0178 λ (44 × 39 × 1.6 mm³), at lower frequency of 3.33 GHz. The antenna consists of SRR based vertex fed octagonal ring as the radiation element and switchable reclined L‐shaped slotted ground plane. Antenna achieves six bands for wireless standards viz: upper WLAN (5.0/5.8 GHz), lower WiMAX (3.3 GHz), super extended C‐band (6.6 GHz), middle X band (9.9 GHz—for space communication), and lower K_U band (15.9 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The proposed design achieves hexa band characteristics during switching ON state of PIN diode located at reclined L‐shaped slot in the ground plane. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

Coplanar waveguide‐fed electrically small dual‐polarized short‐ended zeroth‐order resonating antenna using Ω‐shaped capacitor and single‐split ring resonator for GPS/WiMAX/WLAN/C‐band applications

This work explains the design and analysis of a triple‐band electrically small (ka = 0.56 < 1) zeroth‐order resonating (ZOR) antenna with wideband circular polarization (CP) characteristics. The antenna compactness is obtained due to ZOR frequency of composite right/left‐handed (CRLH) transmission line (TL) and wideband CP radiation are achieved due to the introduction of single‐split ring resonator and asymmetric coplanar waveguide fed ground plane. The proposed antenna obtains an overall electrical size including the ground plane of 0.124 λ₀ × 0.131 λ₀ × 0.005 λ₀ at 1.58 GHz and physical dimension of 23.7 × 25 × 1 mm³ are achieved. The antenna provides a size reduction of 44.95% compared to a conventional monopole antenna. The novelty behind the ohm‐shaped capacitor is the generation of extra miniaturization with better antenna compactness. The antenna provides dual‐polarized radiation pattern with linear polarization radiation at 1.58 and 3.54 GHz, wideband CP radiation at 5.8 GHz. The antenna measured results shows good impedance bandwidth of 5%, 6.21%, and 57.5% for the three bands centered at 1.58, 3.54, and 5.8 GHz with a wider axial ratio bandwidth (ARBW) of 25.47% is obtained in the third band. The antenna provides a higher level of compactness, wider ARBW, good radiation efficiency, and wider S₁₁ bandwidth. Hence, the proposed antenna is suitable for use in GPS L1 band (1.565‐1.585 GHz), WiMAX 3.5 GHz (3.4‐3.8 GHz) GHz, WLAN 5.2/5.8 GHz (5.15‐5.825 GHz), and C‐band (4‐8 GHz) wireless application systems.     

Compact triband slotted printed monopole antenna for WLAN and WiMAX applications

This work presents a triband antenna, which is compact, low profile, and covers the bandwidth requirements for WLAN and WiMAX applications. The proposed design is a modified and miniaturized printed monopole antenna. It consists of beveling rectangular patch, a Pi‐shape slot element, and an inverted‐L slot element to achieve resonance in three bands. The physical size of the antenna is 27.5 × 20 mm² while the electrical size is 0.26 λ₀ × 0.23 λ₀ at the lower operating frequency which is very compact as compared to other triband designs. It works in three bands, that is, 2.37 to 2.52 GHz, 3.35 to 3.90 GHz, and 4.97 to 7.85 GHz with |S₁₁| < ? 10 dB within these operating bands. The prototype of the proposed miniaturized antenna has been fabricated and the measured results are provided for validation. Antenna performance is studied in terms of input match, gain, radiation efficiency, surface current distributions, and radiation pattern. The antenna shows a nearly omnidirectional radiation pattern with peak efficiency of 90% and acceptable gain of 4 dBi over the three operating bands of WLAN and WiMAX. The prototype of the antenna is fabricated, and simulated results have been verified through measurements.     

Metamaterial‐inspired miniaturized antenna loaded with IDC and meander line inductor using partial ground plane

In this article, a novel omnidirectional compact dual band metamaterial‐inspired antenna with CPW feed has been proposed for application of GSM 1800 (1.71‐1.785 GHz/1.805‐1.879 GHz), GSM 1900 (1.85‐1.91 GHz/1.93‐1.99 GHz), UMTS (1.92‐2.17 GHz), WLAN/Wi Fi (4.9, 5, 5.9 GHz), HiperLAN1 (5.15‐5.3 GHz), and HiperLAN2 (5.47‐5.72 GHz) using a combination of meander line inductor and interdigital capacitor (IDC). The antenna consists of complimentary right/left handed (CRLH) transmission line on both sides of patch to excite zeroth order mode (n = 0). The rectangular slotted stubs act as a virtual ground for the structure using a short circuit condition at the end of the IDC. The zeroth order resonance (ZOR) frequency is mainly controlled by IDC and partially with the meander line inductor. The designed antenna operates from 1.72 to 2.22 GHz and 4.25 to 5.88 GHz with radiating size of 0.56λ_o × 0.35λ_o (32 × 20 mm²), where λ_o is the free‐space wavelength at ZOR frequency of 5.27 GHz. The proposed antenna offers measured impedance bandwidth (|S₁₁| <?10 dB) of 25.3 and 18.7% at 1.95 and 5.28 GHz and covers the targeted frequency bands. The proposed structure offers omnidirectional radiation patterns are congruous throughout the working band.     

Broadband compact CPW‐fed metasurface antenna for SAR‐based portable imaging system

A broadband and compact coplanar waveguide (CPW) coupled‐fed metasurface (MS)‐based antenna for C‐band synthetic aperture radar (SAR) imaging application is proposed in this article, which is consisted of 16 uniform periodic square patches performed as radiators. The CPW feeding structure gives two following functions: (1) It excites an aperture coupling slot structure underneath the center of MS patch array. (2) It acts as a ground plane for the metasurface patch units. Different slots were investigated and eventually an hourglass‐shaped slot is applied to enhance bandwidth for imaging applications. A prototype with a dimension of 60 × 60 × 1.524 mm³ (1.1λ₀ × 1.1λ₀ × 0.03λ₀) operating at the center frequency 5.5 GHz (f₀) has been fabricated and measured to verify the design principle. This antenna has a measured impedance bandwidth of 12.4% from 5.14 to 5.82 GHz, a peak gain of 9.2 dBi and averaged gain of 7.2 dBi at broadside radiation. Microwave imaging experiments using the proposed antenna have been carried out and a good performance is achieved.     

New Compact antenna based on simplified CRLH‐TL for UWB wireless communication systems

This letter presents the experimental results of a novel planar antenna design which is synthesized using simplified composite left/right‐handed transmission‐line (SCRLH‐TL), which is a version of a conventional composite left/right handed‐transmission‐lines (CRLH‐TL), however, with the omission of shunt‐inductance in the unit‐cell. SCRLH‐TL exhibits a right‐handed response with nonlinear dispersion properties and a smooth Bloch‐impedance distribution. Arranged within the inner slot of the antenna are three smaller rectangular patch radiators. Each patch radiator is embedded with an E‐shaped notch, and located in the antenna conductor is a larger E‐shaped notch next to the 50‐Ω termination. The E‐shaped notches constitute SCRLH‐TL property. The gap in the slot between the smaller patches and the conductor next to the larger E‐shaped notch determines the impedance bandwidth of the antenna. The dimensions of the smaller patches determine the radiation characteristics of the antenna. The antenna is excited using a conductor‐backed coplanar waveguide transmission‐line. The antenna covers a bandwidth of 7.3 GHz between 0.7 GHz and 8GHz, which corresponds to 167.81%. In this band, the antenna resonates at 4.75 GHz and 7 GHz; the gain and radiation efficiency at these frequencies are 4 dBi—80% and 3.6 dBi—73%, respectively. The antenna's performance was validated through measurement. The antenna has dimensions of 0.0504λ₀ × 0.0462λ₀ × 0.0018λ₀, where λ₀ is free‐space wavelength at 700 MHz. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:217–225, 2016.     

Compact frequency reconfigurable triple band notched monopole antenna for ultrawideband applications

A compact ultra‐wideband (UWB) reconfigurable microstrip fed monopole antenna having size of 0.22 λ₀ × 0.28 λ₀ × 0.005 λ₀ with switchable frequency bands is presented. Triple band notched characteristics are achieved by inserting two stubs at top of radiator and one slot in between the radiator and microstrip feed line. Proposed antenna achieves reconfigurability with three PIN diodes at strategic positions to obtain eight different operational modes. In one of the operational modes, antenna operates in the entire UWB (3‐14 GHz) with fractional bandwidth of 127.5%. Two stubs are used to notch two frequency bands worldwide interoperability for microwave access (3.3‐3.6 GHz/WiMAX) and C‐band (3.7‐4.2 GHz). T‐shaped slot is also inserted to notch wireless local area network (5.725‐5.825 GHz/WLAN) frequency band. Proper biasing of PIN diodes is done by using suitable chip inductors and capacitors. Proposed antenna exhibits stable radiation patterns with average gain of around 3 dBi. Simulation and measurement results are in good agreement. Proposed antenna is suitable for on‐demand band rejection of parasitic bands coexisting in UWB.     

Spoof surface plasmon polariton band‐stop filter with single‐loop split ring resonators

A novel band‐stop filter with single‐loop split ring resonators (SRRs) is proposed for spoof surface plasmon polaritons (SPPs) at millimeter wave frequencies, achieving a miniaturized size of 0.052λ₀ × 0.278λ₀ at its resonant frequency. The SRRs provide both a low‐pass response as the rectangular corrugations used in the conventional SPPs and an additional band‐stop response induced by the resonance of SRRs. To verify this design, a back‐to‐back device with two coplanar waveguides as the input and output feeding was fabricated and characterized, the measured S‐parameters of which agree well with the simulation. The measured stop band is centered at 49 GHz with a ?10‐dB bandwidth of 4.1 GHz and a high Q‐factor of 93, in which the maximum attenuation is 31 dB. The filter has a low insertion loss of less than 2.8 dB in the pass band. Such approaches may find many applications to achieve compact millimeter wave circuits.     

A dual‐band efficient circularly polarized rectenna for RF energy harvesting systems

A multilayered circularly polarized (CP), dual‐band, stacked slit‐/slotted‐patch antenna with compact size and with compact rectifier is offered for RF energy harvesting systems. The compact dual‐band CP antenna size is able to achieve by stacking slotted‐circular‐patch (SCP) on the substrate above the tapered‐slit‐octagon patch (TSOP). Dual‐band CP radiation is realized by stacking the SCP on the TSOP and the microstrip feedline with metallic‐via to SCP. Eight‐tapered‐slit with length difference of 6.25% are embedded along the octagonal directions symmetrically on the TSOP from the patch's center and two unequal size circular slots are embedded in diagonal axis onto SCP to produce dual‐orthogonal modes with almost equal magnitude for CP waves. The designed antenna is realized measured gain of greater than 5.2 dBic across the band (0.908‐0.922 GHz) with maximum gain of 5.41 dBic at 0.918 GHz and gain of greater than 6.14 dBic across the band (2.35‐2.50 GHz) with maximum gain of 7.94 dBic at 2.485 GHz. An overall antenna volume is 0.36λ _o × 0.36λ _o × 0.026λ _o (λ _o is free space wavelength at 0.9 GHz). A compact composite right‐/left‐handed (CRLH) based rectifier with dual‐band at 0.9 and 2.45 GHz is designed, prototyped, and measured. The right‐handed (RH) part of the CRLH transmission line (TL) is formed by a microstrip line. The left‐handed (LH) part of the CRLH‐TL is formed by lumped components. The measured RF‐DC conversion efficiency is 43% at 0.9 GHz and 39% at 2.45 GHz with rectifier size of 0.18λ _o × 0.075λ _o × 0.0002λ _o at 0.9 GHz.     

A novel miniaturized metamaterial lens antenna

This article develops a flat, miniaturized lens based on metamaterial for antenna gain improvement. The overall size of the lens is 1.9λ₀ × 1.9λ₀ × 0.05λ₀ . The distance between the metamaterial lens and the antenna is only about 0.4λ₀ . The prototype lens antenna is fabricated and the measured results are in agreement with the simulated results. It shows that the proposed lens provides significant gain enhancement by 2 to 3.5 dB between 1.3 and 1.45 GHz, which effectively demonstrate a high directivity, miniaturized, and compact metamaterial lens antenna.     

Switched beam dielectric resonator antenna array with six reconfigurable radiation patterns

A single feed, four element rectangular Dielectric Resonator Antenna (DRA) array, with beam switching capability is proposed. A wide impedance bandwidth of more than 25% at the center frequency of 1.95 GHz is achieved. Each DRA has two excitation strips and four parasitic patches. The six cases are discussed; each case corresponds to a diverse radiation pattern. The antenna beam is switched in azimuth (θ = 45°) at Φ = 0°, 60°, 120°, 180°, 240°, and 300°. The antenna gain is found to be more than 7 dB in most of the frequency band of interest. A passive prototype is developed and tested to validate simulation results. The comparison between the simulated and measured reflection coefficients and the radiation patterns for the six cases is presented. A good agreement between the measured and simulated results is observed. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:519–530, 2016.     

A wideband circularly polarized slot antenna with antipodal strips for WLAN and C‐band applications

A single‐fed circularly polarized square shaped wide slot antenna with modified ground plane and microstrip feed has been presented. The field in the slot is perturbed by introducing an antipodal strips section attached with a microstrip line to produce circular polarization in a wide band of frequencies. The antipodal strip section consists of a group of four strips of unequal length and separation. The presence of asymmetric perturbations in the slot is mainly responsible for exciting two orthogonal modes in the slot having equal magnitude and 90° phase difference which results in circular polarization. A wide bandwidth of 3.3 GHz (4.4 GHz‐7.7 GHz) has been achieved for an axial ratio value AR < 3 dB with the minimum axial ratio value being 0.3 dB. The impedance bandwidth for |S₁₁| < ?10 dB ranges from 4.3 GHz to 8 GHz, and therefore covers most of the C‐band communication systems. The antenna exhibits stable radiation patterns throughout the circular polarization bandwidth with a gain around 6 dBi in entire operational bandwidth. A prototype of antenna was fabricated and measured. The antenna has a planar size 0.40λ₀ × 0.40λ₀ and thickness of 0.02λ₀ where λ₀ is the wavelength in free space at the lowest frequency. With its compact size and low profile, the antenna is a favorable choice for WLAN (5.15‐5.85 GHz) and a wide variety of C‐band wireless applications.     

Implementation of defected ground structure for microstrip filtenna design

A microstrip patch filtenna inspired by defected ground structure (DGS) is presented in this article. It uses modified split ring resonator and capacitance loaded strip as a radiating element. The presented structure is incorporated with a pair of double U‐shaped DGS (DU‐DGS) to obtain filtering characteristics. The width of DU‐DGS plays a vital role in selecting attenuation poles of the filter as well as for the filtenna circuit. The separation distance between the DU‐DGS also affects the resonant frequency of the structure. Both radiation and filtration can be performed through a single structure, otherwise known as filtenna. The physical size of the proposed filtenna in terms of guided wavelength is 2.465λ_g × 1.160λ_g × 0.116λ_g at 10.8 GHz, and is comparatively less to others reported, so is considered as a superior feature. The presented filtenna possesses impedance bandwidth of 700 and 1800 MHz at 10.8 and 16.6 GHz, which covers standards of X‐ and Ku‐band, respectively. So, this can be referred to as dual band filtenna. The radiation pattern shows omnidirectionality in both E and H planes at resonance.     

Compact broadband circularly polarized slot‐patch antenna array

A simple design of circularly polarized slot‐patch antenna array with broadband operation and compact size is presented in this article. The antenna element consists of a circular slot and a semicircular patch, which are etched on both sides of a substrate. For the gain and axial ratio (AR) bandwidth enhancement, its array antennas are implemented in a 2 × 2 arrangement and fed by a sequential‐phase feeding network. The final 2 × 2 antenna array prototype with compact lateral dimension of 0.8λ_L × 0.8λ_L (λ_L is the lowest frequency within AR bandwidth) yielded a measured impedance bandwidth of 103.83% (2.76‐8.72 GHz) and a measured AR bandwidth of 94.62% (2.45‐6.85 GHz). The peak gain values within the AR bandwidth are from 2.85 to 8.71 dBi. A good agreement between the simulated and measured results is achieved. This antenna array is suitable for multiservice wireless systems covering WiMAX, WLAN and C‐band applications such as satellite communications.     

Compact sub‐6 GHz 5G‐multiple‐input‐multiple‐output antenna system with enhanced isolation

A compact two‐element multiple‐input‐multiple‐output (MIMO) antenna system with improved impedance matching and isolation is presented for future sub‐6 GHz 5G applications. The two identical tapered microstrip line fed modified rhombus‐shaped radiating elements are placed in the same orientation at a compact substrate area of 0.24λ₀ × 0.42λ₀ (where, λ₀ at 3.6 GHz) on a shared rectangular ground. A remodeled T‐shaped ground stub is placed between a pair of radiating element to achieve improved impedance bandwidth and isolation. Further, a split U‐shaped stub connected to center of each radiating element to achieve the desired resonant frequency of 3.6 GHz. The proposed antenna covers a ?10 dB operating band of 3.34 to 3.87 GHz (530 MHz) with more than 20 dB isolation between a pair of elements. MIMO performances are also analyzed and experimentally validated. The measured performances of a prototype are found in good agreement with simulated performances. Further, the simulation study is carried out to see the effect of housing and extended ground plane on two‐element MIMO antenna for practical application. An idea of realization of 12‐element MIMO is also studied using the proposed two‐element MIMO antenna.     

Design of novel compact dual‐band filtering power divider using stepped‐impedance resonators with high selectivity

A novel compact dual‐band power divider with filtering responses is presented in this article. The proposed circuit utilizes coupled quarter‐wavelength stepped‐impedance resonators. By controlling these resonators, dual‐band operation can be realized. Furthermore, a resistor is connected between the two open ends of the input feed line to obtain good isolation at two bands. Source load coupling is utilized to enhance the selectivity. To verify the proposed idea, a filtering power divider with the operating frequencies of 2.4 and 5.8 GHz is implemented. Good agreement between the simulated and measured results validates the proposed idea. The total size of the circuit is 0.23λ_g × 0.28λ_g, where λ_g is the guide wavelength of 2.4 GHz. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:262–267, 2016.     

Compact wide band directional antenna using cross‐slot artificial magnetic conductor (CSAMC)

In this article a novel wide‐band artificial magnetic conductor (AMC) based wideband directional antenna is presented for ultra‐wideband (UWB) applications. The proposed novel cross‐slot AMC (CSAMC) achieves wide ±90° reflection phase bandwidth of 4.07 GHz (44.69%) and is used as a reflector. The overall antenna structure is designed with 4 × 4 CSAMC unit cell array and has very compact size of (0.584λ₀ × 0.584λ₀). The proposed structure improves the radiation properties and exhibits 91.5% (3.13‐8.41 GHz) impedance bandwidth (VSWR ≤2). Additionally, it results in significant improvement in gain and front to back ratio. The proposed antenna is fabricated and its measured performance is in good agreement with simulation results.     

Miniaturized dual‐band metamaterial inspired antenna with modified SRR loading

A miniaturized dual‐band CPW‐fed Metamaterial antenna with modified split ring resonator (SRR) loading has been presented in this paper. Proposed antenna comprises a tapered rectangular patch with a slot in which an elliptically SRR has been loaded to achieve miniaturization. Proposed antenna shows dual band operations in the operating band 3.25‐3.42 and 3.83‐6.63 GHz, respectively. It has been observed that lower mode (at 3.36 GHz) is originated by means of modified SRR. SRR is being modified by small meandered line inductor which is placed instead of strip. This provides an extra inductance to SRR resulting miniaturization. Overall electrical size of the proposed antenna is 0.222 × 0.277 × 0.017 λ₀ at 3.36 GHz. Second band is due to coupling between feed and ground planes. The antenna offers an average peak gain of 1.72 and 3.41 dB throughout the first and second band respectively. In addition to that this antenna exhibits perfect omnidirectional and dipolar radiation patterns at xz‐ and yz‐ plane respectively. Due to consistent radiation pattern, ease of fabrication, and compact nature this antenna can be used for wireless applications such as worldwide interoperability for microwave access (WiMAX), industrial, scientific and medical (ISM) band, WLAN/Wi‐Fi bands.