共查询到20条相似文献,搜索用时 140 毫秒
1.
碳纤维增强塑料(CFRP)筋良好的工作性能使其可以代替传统的预应力钢筋,但相对滞后的锚固体系研究已成为影响其使用的关键原因。通过研制新型的CFRP筋粘结夹片式球面锚具,研制了3种不同尺寸锚具,共9组试件进行锚固性能试验。结果表明,在锚固国产光圆碳纤维增强塑料筋时,锚具锚固效率最大达到80.6%;对于粘结夹片式球面锚具,钢质套管长度和粘结介质的粘结性能是影响锚固性能的关键因素;球面锚具可以自动调整CFRP筋的中线与锚具锥孔中线,改变孔口的受力特性,减小孔口剪应力,提高锚固性能。 相似文献
2.
3.
4.
5.
<正>0前言我国自80年代末期开始,在水泥、煤炭等行业就已自主设计建造预应力混凝土筒仓。由于水泥厂混凝土筒仓施工主要采用滑模工艺,为更好的适应滑模工艺要求,90年代后期我国的混凝土筒仓多采用了无粘结预应力技术。最近几年我国承担了大量的国外知名企业的水泥生产线项目建设任务,其设计、咨询人员不了解甚至没有接触过无粘结预应力混凝土结构,水泥厂筒仓多要求采用有粘结预应力混凝土结构。因此,国外项目进行有粘结预应 相似文献
6.
将预应力技术引入筒仓结构中是近年来采用的比较有效且经济的手段.现阶段,国内外预应力技术主要包括后张有粘结预应力体系和后张无粘结预应力体系.从技术性能、施工工艺及经济性等方面比较分析两种预应力体系的特点及差异,以便于设计人员能根据工程特点在结构设计阶段对预应力体系做出正确合理的选择. 相似文献
7.
无粘结预应力混凝土结构广泛应用于土木工程的各个领域中,如工业与民用建筑中的预应力梁、板及吊车梁等,无粘结预应力混凝土具有控制或减小变形、提高构件刚度及充分利用高强材料的高强轻质性等优点。 相似文献
8.
近年来,由于纤维复合增强材料(FRP)加固结构的需要,越来越多的人开始对FRP片材锚固技术进行深入的研究与发展。现有的FRP片材锚固技术大致分为两类,包括普通FRP锚固技术和预应力FRP锚固技术。由于对此类锚固技术的研究时间还不是很长,很多技术不是很完善,需要不断地改进和优化,以期能在将来满足实际工程需要。本文针对目前一些FRP锚固技术进行了简要的介绍和探讨。 相似文献
9.
本文介绍了我公司在国家“八五”重点工程——湖北省大峪口矿肥结合工程复混肥车间预应力屋架后张法施工工艺和要点以及施工中需注意的几个问题。 相似文献
10.
大型LNG储罐一般采用有粘结后张法预应力混凝土结构。工艺主要采用波纹管铺设孔道,群锚式锚具,自动穿束机穿束,大吨位千斤顶张拉。张拉过程以伸长值和张拉应力双重控制。预应力体系进行施工前应进行现场实验,同时计算伸长值和预应力损失,严格控制施工过程。 相似文献
11.
采用Gc-MS分析方法,研究了稠油石化污水中有机物分布特征,分析结果表明,稠油石化污水中有机物以烷烃、酚类和有机酸为主并含有一定量的PAHs,污水中有机物分子量140以下的以酚类为主,分子量在140以上的有机物多为烷烃和PAHs,其中烷烃类主要为分子量在200~350的饱和烷烃为主,PAHs以含不同数量甲基取代基的萘为主. 相似文献
12.
国内外染料工业发展新动向 总被引:1,自引:1,他引:1
本文阐述了国内外染料工业发展的新动向,指出了国外染料市场趋势和发展新特点:染料企业重组已趋平稳和进一步确立我国作为世界染料生产和供应中心的地位,在国际上设置"技术壁垒"和"贸易壁垒"的力度进一步加强,新染料的开发放到比较重要的地位,不断适应纺织工业新的着色要求;还指出了我国染料工业的发展新特点:市场活跃新品不断,出口增长,连创新高,新兴基地,发展壮大。注重染料质的提高,采用新技术和清洁工艺生产是我国染料工业发展的重中之重。有7篇参考文献。 相似文献
13.
丁二烯萃取装置聚合物产生原因分析及对策 总被引:3,自引:0,他引:3
张斌 《化学工业与工程技术》2002,23(4):26-29
丁二烯抽提装置因其萃取溶剂二甲基甲酰胺及丁二烯本身的特性 ,在运行过程中易产生各类聚合物 ,堵塞设备、管线、阀门等 ,制约装置的运行负荷和周期。从理论上分析了装置中各类聚合物的特性及危害 ,总结聚合物产生的原因 ,结合生产实际 ,提出了相应的对策 相似文献
14.
Hygienic impeccable surfaces are, e.g., in food technology and healthcare facilities conditionally essential. Does a presence of fine particular contamination occur, adhesion forces between particles and surfaces are relevant. In this paper the cleaning‐process of materials, which are often used in cleanrooms are focused. The surface properties, which influence the dislodgement of particles are observed. There are two groups of materials used for the experiments, which are commonly used in hygienic relevant places in healthcare facilities. 相似文献
15.
减轻环境压力利用粉煤灰生产肥料 总被引:1,自引:0,他引:1
介绍粉煤灰的基本性质,总结目前各种粉煤灰肥料的特点和生产方法,对生产、作用机理进行分析,简单论述粉煤灰肥料的应用方法,并提出应注意的问题. 相似文献
16.
本文综述了多肽的液相分段合成方法,这些合成方法是近年来多肽和蛋白质合成领域中的一种发展趋势.详细介绍了天然化学连接、化学区域选择连接、施陶丁格连接等方法,并对这些方法进行了比较,指出其优点及不足并提出改进办法.最后对多肽合成技术的发展做了进一步展望. 相似文献
17.
Sung-Chyr Lin 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1996,66(2):109-120
Surfactants find applications in a wide variety of industrial processes. Biomolecules that are amphiphilic and partition preferentially at interfaces are classified as biosurfactants. In terms of surface activity, heat and pH stability, many biosurfactants are comparable to synthetic surfactants. Therefore, as the environmental compatibility is becoming an increasingly important factor in selecting industrial chemicals, the commercialization of biosurfactant is gaining much attention. In this paper, the general properties and functions of biosurfactants are introduced. Strategies for development of biosurfactant assay, enhanced biosurfactant production, large scale fermentation, and product recovery are discussed. Also discussed are recent advances in the genetic engineering of biosurfactant production. The potential applications of biosurfactants in industrial processes and bioremediation are presented. Finally, comments on the application of enzymes for the production of surfactants are also made. 相似文献
18.
Birkedal H Khan RK Slack N Broomell C Lichtenegger HC Zok F Stucky GD Waite JH 《Chembiochem : a European journal of chemical biology》2006,7(9):1392-1399
Mineralized tissues are produced by most living organisms for load and impact functions. In contrast, the jaws of the clam worm, Nereis, are hard without mineralization. However, they are peculiarly rich in halogens, which are associated with a variety of post-translationally modified amino acids, many of which are multiply halogenated by chlorine, bromine, and/or iodine. Several of these modified amino acids, namely dibromohistidine, bromoiodohistidine, chloroiodotyrosine, bromoiodotyrosine, chlorodityrosine, chlorotrityrosine, chlorobromotrityrosine, and bromoiodotrityrosine, have not been previously reported. We have found that the distributions of Cl, Br, and I differ: Cl is widespread whereas Br and I, although not colocalized, are concentrated in proximity to the external jaw surfaces. By using nanoindentation, we show that Br and I are unlikely to play a purely mechanical role, but that the local Zn and Cl concentrations and jaw microstructure are the prime determinants of local jaw hardness. Several of the post-translationally modified amino acids are akin to those found in various sclerotized structures of invertebrates, and we propose that they are part of a cross-linked protein casing. 相似文献
19.