Effects of functionalized MWNTs with GMA on the properties of PMMA nanocomposites

The acid modification of multiwall carbon nanotubes (MWNTs) was performed by an HNO₃/H₂SO₄ solution. The glycidyl methacrylate (GMA) undergoing an opening‐ring was grafted onto the surface of acid‐modified MWNTs. The surface properties of MWNTs were investigated by Fourier transform infrared spectrometer (FTIR), Raman spectra, transmission electron microscopy (TEM), X‐ray diffraction, and thermogravimeric analysis. Then the MWNTs/ poly(methyl methacrylate) (PMMA) nanocomposites were prepared by in situ polymerization. The tribological and dielectric properties of nanocomposites were studied. As a result, GMA was grafted on the surface of MWNTs. The tribological and dielectric properties of MWNTs/ PMMA nanocomposites were improved as the content of the surface‐modified MWNT increased. The marked improvement in tribological and dielectric properties were attributed to the good dispersion of MWNTs that were bonded with C?C on the surface that participated in the polymerization of MMA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of tercopolymer BA–MMA–VTES and surface modification of nano‐size Si3N4 with this macromolecular coupling agent

A new macromolecular coupling agent butyl acrylate (BA)‐methyl methacrylate (MMA)‐vinyl triethoxy silane (VTES) tercopolymer was synthesized using solution polymerization initiated by free radical initiator benzoyl peroxide (BPO) and dicumyl peroxide (DCP). Dodecylthiol is choosed as the chain transfer to control the molecule weight of this tercopolymer. The terpolymer's molecular structure was confirmed by FTIR and NMR, and its average molecular weight was determined by GPC. In this work, the tercopolymer BA–MMA–VTES is used for surface modification of silicon nitride (Si₃N₄) nanopowder. The structure surface properties and thermal stability of modified nano‐Si₃N₄ were systematically investigated by FTIR, TGA, TEM, and size distribution analyzer. The results show that the macromolecular coupling agent bonds covalently on the surface of nano‐sized Si₃N₄ particles and an organic coating layer is formed. The optimum loading of this macromolecular coupling agent BA–MMA–VTES tercopolymer is 5% (wt %) of nano‐sized Si₃N₄. TEM also reveals that modified nano‐Si₃N₄ possesses good dispersibility. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

SEM study of the morphologic change of high‐density polyethylene surface grafted with glycidyl methacrylate

Scanning electron microscopy (SEM) study of the morphologic change of high‐density polyethylene (HDPE) surface grafted with glycidyl methacrylate (GMA) was reported. Radiation‐induced grafting of GMA onto HDPE was carried out in acetone and dichloromethane solution, respectively. The effects of irradiation dose, atmosphere, and swelling time on grafting were investigated. Generally, the extent of grafting increased with irradiation dose, but for the grafting carried out in acetone solution, the extent of grafting initially increased with irradiation dose and then remained almost constant. The extent of grafting was higher in acetone solution than in dichloromethane solution at the same irradiation dose. The extent of grafting in nitrogen was higher than that in air. The successful grafting of GMA onto HDPE was confirmed by weighing and FTIR analysis. SEM investigations showed that the morphologies of the PE samples grafted in acetone solution were quite different to those grafted in dichloromethane. The grafting of GMA carried out in acetone was mainly on HDPE surface and that carried out in dichloromethane was mainly in the bulk of HDPE. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and evaluation of fluorosilicone‐modified starch for protection of historic stone

Starch is sensitive to moisture and is weak to durability in the protection application to ancient relics. Therefore, two fluorosilicone‐modified starches are firstly prepared and evaluated for the protection of historic stones. The fluoro‐silicone copolymer grafted starch of P(VTMS/12FMA)‐g‐starch is synthesized by grafting copolymer of vinyltrimethoxysilane (VTMS) and dodecafluoroheptyl methacrylate (12FMA) onto starch. While the fluoro‐silicone starch latex of VTMS‐starch@P(MMA/BA/3FMA) is obtained by emulsion polymerization of VTMS primarily grafted‐starch (VTMS‐starch) with methyl methacrylate (MMA), butyl acrylate (BA) and 2,2,2‐trifluoroethyl methacrylate (3FMA). The grafting fluorosilicone copolymer onto starch improves obviously their hydrophobic and thermal properties. Comparatively, VTMS‐starch@P(MMA/BA/3FMA) film performs higher water contact angle (107°) and thermal stability (350–430°C) than p(VTMS/12FMA)‐g‐starch film (72°, 250–420°C) due to the migration of fluorine‐containing group onto the surface of film during the film formation. Therefore, VTMS‐starch@P(MMA/BA/3FMA) shows much better protective performance in water‐resistance, and salt/freeze‐thaw resistance for stone samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41650.     

Radiation‐induced GMA/DMAA graft copolymerization onto porous PE hollow‐fiber membrane

Radiation‐induced graft copolymerization is a powerful technique to prepare a grafted chain with the desired properties pending onto the trunk material. In this work, a polyethylene hollow‐fiber membrane was modified by this technique. The monomers glycidyl methacrylate (GMA) and N,N‐dimethylacrylamide (DMAA) were cografted onto macroporous polyethylene hollow fiber with a grafting degree in the order of 200%. DMAA/GMA cografted membranes were compared to GMA grafted ones for the introduction of an amino acid as a specific ligand. Grafted membranes with a copolymer composition between 0 and 2 DMAA/GMA were prepared by soaking them in solutions of different mixtures of monomers. Copolymers were characterized by FTIR and their composition was estimated by the analysis of the ratio of carbonyl signals. Copolymers with a higher proportion of DMAA showed improved hydrophilic properties and higher conversion rates of epoxy groups on phenyalanine ligands than those of the GMA grafted ones. However, copolymers with a DMAA/GMA ratio higher than 1 showed a detrimental effect on the pure water flux. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1646–1653, 2003     

Study of multi‐monomer melt‐grafting onto polypropylene in an extruder

Free‐radical melt‐grafting of the dual‐monomer systems glycidyl methacrylate–styrene (GMA‐St) and hydroxyethyl methacrylate–styrene (HEMA‐St) onto polypropylene (PP) has been studied using a single‐screw extruder. For single monomer grafting systems, degradation of PP was unavoidable and deterioration of the mechanical properties of the grafted PP subsequently occurred because of β‐scission of PP chains during the free‐radical melt‐grafting process. However, for the dual‐monomer systems, it is shown that the addition of styrene as a comonomer can significantly enhance the GMA or HEMA grafting levels on PP and reduce the extent of β‐scission of PP backbone. It has been found that the grafting degree of dual‐monomer melt‐grafted PP, such as PP‐g‐(GMA‐co‐St) or PP‐g‐(HEMA‐co‐St), is about quadruple that of single‐monomer grafted PP for the same monomer and dicumyl peroxide concentrations. Moreover, the melt flow rate of the dual‐monomer grafted PP is smaller than that of the unmodified PP. Hence, PP not only was endowed with higher polarity, but also kept its good mechanical properties. © 2000 Society of Chemical Industry     

Styrene‐assisted melt‐free radical grafting of glycidyl methacrylate onto isotactic poly(1‐butene)

The melt‐free radical grafting of glycidyl methacrylate (GMA) onto powered isotactic poly(1‐butene) (iPB‐1) using styrene (St) as a comonomer in a Haake mixer was studied. The effects of temperature, initial GMA, and peroxide concentration, as well as the addition of St comonomer, on the final grafting degree, grafting efficiency, and the melt flow rate of grafted polymer were studied. It was shown that the addition of St as a comonomer could significantly enhance the grafting degree of GMA on iPB‐1 and reduce the extent of degradation of iPB‐1 to some degree. It has been found that the grafting degree of dual‐monomer melt‐grafted iPB‐1 was about twice that of single‐monomer‐grafted iPB‐1 for the same monomer and peroxide concentrations. The grafting of GMA onto iPB‐1 remarkably accelerated the crystal form II → I transformation of iPB‐1. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Grafting polyamide 6 onto multi‐walled carbon nanotubes using microwave irradiation

Chemical reactions under microwave irradiation can be very efficient, with a significant shortening of reaction time. Few studies have reported the use of microwaves to functionalize carbon nanotubes. In the work reported, a new method of formulating functionalized multi‐walled carbon nanotubes (MWNTs) was developed by covalent grafting of polyamide 6 (PA6) chains onto the carbon nanotubes assisted by microwave irradiation. PA6 chains were grafted onto acidified MWNTs through condensation reaction between the carboxylic groups of the MWNTs and the terminal amine groups of PA6 using microwave radiation heating. The functionalized carbon nanotubes (MWNT‐g‐PA6) were characterized systematically using infrared and Raman spectroscopy, transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). TEM showed that the surface of the MWNTs was covered with a layer of PA6. TGA results indicated that the MWNT‐g‐PA6 contained about 47 wt% of polymer. A novel, convenient and efficient functionalization approach is reported, involving covalently grafting PA6 chains onto MWNTs assisted by microwave irradiation. Copyright © 2010 Society of Chemical Industry     

Irradiation grafting of methyl methacrylate monomer onto ultra‐high‐molecular‐weight polyethylene: An experimental design approach for improving adhesion to bone cement

The grafting of methyl methacrylate (MMA) onto ultra‐high‐molecular‐weight polyethylene (UHMWPE) and chromic acid etched UHMWPE was conducted with a preirradiation method in air in the presence of a Mohr salt and sulfuric acid. The grafted samples were characterized by Fourier transform infrared (FTIR) spectroscopy, a gravimetric method, differential scanning calorimetry, scanning electron microscopy (SEM), and interfacial bonding strength measurements. The FTIR results showed the presence of ether and carbonyl groups in the MMA‐grafted UHMWPE (MMA‐g‐UHMWPE) samples. The Taguchi experimental design method was used to find the best degree of grafting (DG) and bonding strength. The efficient levels for different variables were calculated with an analysis of variance of the results. SEM micrographs of MMA‐g‐UHMWPE samples showed that with increasing DG and chromic acid etching, the MMA‐g‐UHMWPE rich phase increased on the surface; this confirmed the high interfacial bonding strength of the grafted samples with bone cement. The grafting of the MMA units onto UHMWPE resulted in a lower crystallinity, and the crystallization process proceeded at a higher rate for the MMA‐g‐UHMWPE samples compared to the initial UHMWPE; this suggested that the MMA grafted units acted as nucleating agents for the crystallization of UHMWPE. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Grafting of glycidyl methacrylate onto high‐density polyethylene with reaction time in the batch mixer

The melt grafting of glycidyl methacrylate (GMA) onto high‐density polyethylene (HDPE) in the presence of free radical initiators was investigated in the batch mixer. The graft content was determined with the titration and FTIR spectroscopy. The graft content increased with the increase of peroxide and initially introduced GMA concentration. Increase of the grafted GMA content resulted in decrease of the melt index. Interestingly, there was a sudden drop of GMA grafting content with the reaction time. It is assumed that depolymerization of GMA have taken place over the ceiling temperature. The crystallinity of the prepared glycidyl methacrylate grafted high density polyethylene (HDPE‐g‐GMA) was determined by the measurement of the heat of fusion. GMA grafted site acted as defect and crystallinity of the HDPE‐g‐GMA decreased with the increase of grafting reaction. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyethylenimine‐grafted and HSA‐immobilized poly(GMA–MMA) affinity adsorbents for bilirubin removal

The epoxy‐group‐containing microspheres from cross‐linked glycidyl methacrylate and methyl methacrylate, poly(GMA–MMA), were prepared by suspension polymerisation. The epoxy groups of the poly(GMA–MMA) microspheres were used for grafting with an anionic polymer polyethylenimine (PEI) to prepare non‐specific affinity adsorbents (poly(GMA–MMA)–PEI) for bilirubin removal. The specificity of the poly(GMA–MMA)–PEI adsorbent to bilirubin was further increased by immobilization of human serum albumin (HSA) via adsorption onto PEI‐grafted poly(GMA–MMA) adsorbent. Various amounts of HSA were immobilized on the poly(GMA–MMA)–PEI adsorbent by changing the medium pH and initial HSA concentration. The maximum HSA content was obtained at 68.3 mg g^?1 microspheres. The effects of pH, ionic strength, temperature and initial bilirubin concentration on the adsorption capacity of both adsorbents were investigated in a batch system. Separation of bilirubin from human serum was also investigated in a continuous‐flow system. The bilirubin adsorption on the poly(GMA–MMA)–PEI and poly(GMA–MMA)–PEI–HSA was not well described by the Langmuir model, but obeyed the Freundlich isotherm model. The poly(GMA–MMA)–PEI affinity microspheres are stable when subjected to sanitization with sodium hydroxide after repeated adsorption–desorption cycles. Copyright © 2004 Society of Chemical Industry     

Investigation of styrene‐assisted free‐radical grafting of glycidyl methacrylate onto high‐density polyethylene using response surface method

In this study, the free‐radical grafting of glycidyl methacrylate (GMA) onto high‐density polyethylene (HDPE) in the presence of styrene, as a comonomer, is investigated using a Brabender internal mixer. To optimize grafting level of GMA onto HDPE, response surface method (RSM) was exploited. Using RSM method of experimental design, it was possible to investigate the individual effects of various variables including dicumyl peroxide (DCP) concentration, GMA content, as well as reaction time, and their interactions on grafting efficiency. The fitted quadratic model obtained from statistical analysis is expressed by an approximating function to investigate the final torque as a responding variable over the experimental range of the independent variables. The grafting yield of GMA onto HDPE for the prepared samples was determined using titration/back‐titration technique and Fourier transform infrared spectroscopy (FTIR). According to the torque–time diagrams, increasing the DCP content led to an increase in GMA grafting yield. Also, it was found that the reaction time imparts minor effect on the final processing torque, and there exists an interaction between DCP and GMA content. The results of melt flow index (MFI) test showed that increasing the reaction time at constant DCP and GMA content enhances the MFI values of the samples, due to the more probability of chain scission phenomenon. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Surface modification of polyethylene by plasma pretreatment and UV‐induced graft polymerization for improvement of antithrombogenicity

The purpose of this study was to enhance blood compatibility of polyethylene (PE) films. Glycidyl methacrylate (GMA) was grafted onto the surface of PE by Ar plasma pretreatment and UV‐induced graft polymerization without photo‐initiator, then heparin was immobilized onto the poly (glycidyl methacrylate) segments. The surface compositions and microstructure of GMA graft polymerized PE films were studied by X‐ray photoelectron spectroscopy (XPS) and Attenuated Total Reflectance Fourier Transfer Infrared (ATR‐FTIR) spectroscopy. It was confirmed that heparin was successfully immobilized onto the surface of PE films by XPS analysis. The antithrombogenicity of the samples was determined by the activated partial thromboplastin time (APTT), prothrombin time (PT), thrombin time (TT), and plasma recalcification time (PRT) tests and platelet adhesion experiment. Results indicated that the antithrombogenicity of modified PE was improved remarkably. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2014–2018, 2004     

Surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate from carbon fibre

Surface modification of carbon fibre (CF) by well‐defined polymer brushes was carried out using the ‘grafting from’ method. Poly(methyl methacrylate)‐grafted carbon fibre (CF‐PMMA) was successfully prepared by surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) of methyl methacrylate (MMA) from the macro‐initiator, bromo‐acetic ester‐modified carbon fibre (CF‐BrA), with the complex of 1,10‐phenanthroline and Cu(I)Br as catalyst. The percentage of grafting (PG%) and the conversion of monomer (C%) increased linearly with increasing of polymerization time, and reached 24.0 % and 6.7 %, respectively, after a polymerization time of 6 h, calculated from the elemental analyses (EA). The structural and surface morphological analyses were conducted with Fourier‐transform infrared (FTIR) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Copyright © 2005 Society of Chemical Industry     

Determination methods of the grafting yield in glycidyl methacrylate‐grafted ethylene/propylene/diene rubber (EPDM‐g‐GMA): Correlation between FTIR and 1H‐NMR analysis

A normalized and universally applicable calibration function for the Fourier‐transformed infrared (FTIR) quantification of the glycidyl methacrylate (GMA) grafting yield in polymers of known compositions having ethylene block sequences was established. The ¹H nuclear magnetic resonance (¹H‐NMR) spectroscopy results achieved on different GMA‐grafted ethylene/propylene/diene rubber (EPDM‐g‐GMA) and ethylene/GMA copolymers were correlated to their FTIR data to calibrate the relative determination of the FTIR method. Both direct and indirect standardization approaches were followed and evaluated. The calibration deduced was used to investigate the free radical grafting reaction of GMA on EPDM rubber in the melt phase. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2616–2624, 1999     

Synthesis and characterization of poly(butyl acrylate‐co‐ethylhexyl acrylate)/ poly(vinyl chloride)[P(BA‐EHA)/PVC] novel core‐shell modifier and its impact modification for a poly(vinyl chloride)‐based blend

Synthesis of poly(butyl acrylate‐co‐ethylhexyl acrylate)‐core/poly(vinyl chloride)‐shell [P(BA‐EHA)/PVC] used as a modifying agent of PVC via semicontinuous seeded emulsion copolymerization is reported here. Diameter distributions and morphology of the composite latex particles were characterized with the aid of particle size analyzer and transmission electron microscopy (TEM). The grafting efficiency (GE) and grafting ratio (GR) of vinyl chloride (VC) grafted onto the P(BA‐EHA) with varying content of crosslinking agent and core‐shell ratios were investigated. TEM studies indicated that the P(BA‐EHA)/PVC latex particles have core‐shell structure, and the P(BA‐EHA) rubbery particles in blending materials were uniformly dispersed in PVC matrix. Dynamic mechanical analysis (DMA) results revealed that the compatibility between the P(BA‐EHA) and the PVC matrix was significantly improved due to the presence of the P(BA‐EHA)‐grafted‐VC copolymer. The notched impact strength of the blending material with 3 wt% of rubber content was seven times that of the PVC. Linear regressions of mechanical properties as loading of the modifier were made. The resulting data of notched impact strength and elongation at break for the blending materials deviated significantly from regression lines within 3–4.5 wt% of the P(BA‐EHA) content. The PVC blends modified by the modifier exhibited good toughness and easy processability. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Synthesis and characterization of novel hybrid polyoxazoline‐grafted multiwalled carbon nanotubes

The novel hybrid polyoxazoline‐grafted multiwalled carbon nanotubes (POZO‐grafted MWNTs) were synthesized by the reaction of partially hydrolyzed polyoxazolines (Hydrolyzed‐POZO) and MWNTs having carboxylic acid groups (MWNT‐COOH) in the presence of DCC as a condensing agent. Hydrolyzed‐POZO (degree of hydrolysis, 20.2 mol % by ¹H‐NMR) were produced from the hydrolysis of polyoxazolines in an aqueous NaOH solution at reflux for 72 h. MWNT‐COOH were prepared by acid treatment of pristine MWNTs. The composition, structure, thermal property, and surface morphology of the novel hybrid POZO‐grafted MWNTs were fully characterized by FT‐IR, Raman, ¹H‐NMR, DSC, TGA, SEM, and TEM. The obtained POZO‐grafted MWNTs are well soluble in various organic solvents and water. It was observed that the glass transition temperature (T_g) of POZO‐grafted MWNTs was lower than that of Hydrolyzed‐POZO due to the absence of hydrogen bonding interactions between Hydrolyzed‐POZO itself caused by the incorporation with MWNTs. It was also found that Hydrolyzed‐POZO was homogeneously attached to the surfaces of MWNTs through the “grafting‐to” method. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Radiation‐induced graft polymerization of glycidyl methacrylate onto PE/PP nonwoven fabric and its modification toward enhanced amidoximation

A nonwoven fabric made of polypropylene coated by polyethylene was used as the trunk polymer in the preparation of a highly efficient new adsorbent. Metal ion uptake capacity has been aimed to be increased by introducing double amidoxime groups per repeating unit of the chains grafted to trunk polymer. The base polymer was irradiated by electron beams with a dose of 200 kGy under N₂ atmosphere and glycidyl methacrylate (GMA) was grafted onto irradiated nonwoven fabric. Grafting conditions were optimized, and GMA‐grafted polymer was modified with 3,3′‐iminodipropionitrile in ethanol at 80°C. GMA grafting (150%) was determined to be the optimum degree given that higher extent of grafting rendered the materials brittle. Pendant nitrile groups were then amidoximated by using 6% hydroxylamine in methanol–water mixture (1 : 1). The all‐polymeric structures were characterized by using FTIR, SEM, and thermal analysis methods, confirming the grafting, modification, and amidoximation stages gravimetrically, spectroscopically, and visually. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Radiation‐induced grafting of glycidyl methacrylate onto high‐density polyethylene (HDPE) and radiation lamination of HDPE

Radiation‐induced grafting of glycidyl meth‐acrylate (GMA) onto high‐density polyethylene (HDPE) and the radiation lamination of HDPE by bulk grafting of GMA were reported. The effects of irradiation dose, monomer concentration, and atmosphere on grafting were investigated. The extent of grafting initially increased with irradiation dose and then remained almost constant. The extent of grafting was higher in 2M GMA than in 1M GMA at the same irradiation dose. The extent of grafting in nitrogen was higher than that in air. The grafted samples were characterized with FTIR spectrometry and thermogravimetric (TG) analysis. A carbonyl group was found on grafted HDPE samples, and the carbonyl index increased with the extent of grafting. TG analyses proved the existence of grafted materials on HDPE and the grafted GMA thermally decomposes at a temperature lower than that of HDPE. Strong adhesion could be obtained with radiation lamination of HDPE by bulk grafting of GMA. Benzophenone facilitates the grafting in a proper concentration range. The adhesion mechanism of the laminated samples was the entanglement of the grafted chains. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 772–779, 2005     

Surface modification of nano‐sized silicon nitride with BA‐MAA‐AN tercopolymer

In this work, a macromolecular coupling agent (BA‐MAA‐AN tercopolymer) was used for surface modification of native nano‐sized silicon nitride (Si₃N₄) powder. This modification strategy was designed for preparing nano‐Si₃N₄/NBR composites. The structure and surface properties of modified nano‐Si₃N₄ were systematically investigated by FTIR, XPS, TGA, TEM, Size Distributions Analyzer, and Contact Angle Measurement. It was found that, the optimum loading of BA‐MAA‐AN tercopolymer coated on the surface of nano‐sized Si₃N₄ is 10% of nano‐Si₃N₄. According to the spectra of FTIR, XPS and TGA, it can be inferred that this macromolecular coupling agent covalently bonds on the surface of nano‐sized Si₃N₄ particles and an organic coating layer is formed. The contact angle experiments show that the hydrophobic property of nano‐sized Si₃N₄ modified with macromolecular coupling agent is improved obviously. TEM reveals that modified nano‐Si₃N₄ possesses good dispersibility and the average diameter in NBR is less than 100 nm. It has also been found that the oil resistance of NBR based nanocomposites is improved greatly due to the modified nano‐Si₃N₄. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008