Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Crystallization behavior of predominantly syndiotactic poly(β-hydroxybutyrate)

Predominantly syndiotactic poly(-hydroxybutyrate), syn-PHB, of variable syndioregularity (syndyad fractions 0.59, 0.62, 0.64, and 0.71) and molecular weight was prepared by the dibutyltin dimethoxide catalyzed ring opening of racemic-butyrolactone (BL). The crystallization behavior of the syn-PHB polymers was investigated by DSC and X-ray diffraction analyses. DSC of films after melting and annealing showed at least one, and often two distinct melting transitions occuring over a broad (often 40°C) temperature range. These results indicate that syn-PHB chain segments of variable syndioregularity form crystalline regions with very different thermodynamic stabilities. Maximum degrees of crystallinity for melt annealed 0.64- and 0.71-syn-PHB was observed at an annealing temperature (T _c ) of 30°C. AtT _c values at 45°C and higher, crystallization of relatively lower syndioregular chain segments was apparently excluded to variable degrees dependent onT _c and sample syndiotactic dyad content. After crystallization of syn-PHB samples at elevated temperatures, ambient temperature annealing resulted in an observed lower temperature melting transition at 50°C. This result showed little to no dependence on syn-PHB syndio-regularity andT _c . Both solution precipitated 0.62-syn-PHB and 0.71-syn-PHB have WAXS patterns with poorly resolved crystalline reflections superimposed on amorphous haloes indicating low levels of crystallinity (17% and 25%, respectively) and poorly formed crystals. Isothermal crystallization monitored by DSC showed that the syn- and natural origin PHB showed fastest crystallization rates at temperatures between 50°C and 70°C and 60°C and 90°C, respectively. From the dependence of the higher melting transition onT _c it was determined that the equilibrium melting temperatures for 0.62-syn-PHB (M _n =83,700 g/mol) and a 0.64-syn-PHB (M _n =11,900 g/mol) were 157 and 154°C, respectively. An Avrami analysis of syn-PHB yielded results similar to that found for natural origin PHB indicating that crystal growth occurs by a two-dimensional mechanism.Guest Editor: Dr. Graham Swift, Rohm & Haas.     

Distribution of poly(β-hydroxybutyrate) and poly(ε-caprolactone)aerobic degrading microorganisms in different environments

To assess the capacity of the natural environment for degrading plastics, the populations of poly(-hydroxybutyrate)(PHB)-and poly(-caprolactone)(PCL)-degrading aerobic microorganisms and their ratios to the total number of microorganisms in soil samples were estimated by the plate count method with agar medium containing emulsified PHB or PCL. The numbers of the degrading microorganisms were determined by counting colonies that formed clear zones on the plate. It was found that PHB- and PCL-degrading (depolymerizing) microorganisms are distributed over many kinds of material, including landfill leachate, compost, sewage sludge, forest soil, farm soil, paddy soil, weed field soil, roadside sand, and pond sediment. Of total colony counts, the percentages of PHB and PCL degrading microorganisms were 0.2–11.4 and 0.8–11.0%, respectively. The results suggest that many kinds of degrading microorganisms are present in each environment and that specific consortia differing in biodegradation capacity are constructed.     

The degradation of gel-spun poly(β-hydroxybutyrate) “wool”

The apparent biodegradability and biocompatibility of the microbially produced polyester, poly(-hydroxybutyrate) (PHB), has been the focus of much research by a number of authors with regard to its potential for use in packaging and medical implantation devices. PHB has recently been produced by gel-spinning into a novel form, with one possible application being as a wound scaffolding device, designed to support and protect a wound against further damage while promoting healing by encouraging cellular growth on and within the device from the wound surface. This new nonwoven form combines a large volume with a low mass, has an appearance similar to that of cotton wool, and has been called wool because of this similarity. The hydrolytic degradation of this wool was investigated in an accelerated model of pH 10.6 and temperature 70°C. It was determined that the PHB wool gradually collapsed during degradation. The surface area-to-volume ratio was concluded to be a primary influencing factor. Degradation was characterized by a reduction in the glass transition temperatures and melting points and a fusion enthalpy peak of maximum crystallinity, (88%), which coincided with the point of matrix collapse.     

Preparation conditions and swelling equilibria of biodegradable hydrogels prepared from microbial poly(γ-glutamic acid) and poly(ε-lysine)

Biodegradable hydrogels prepared by -irradiation from microbial poly(amino acid)s are reviewed. pH-sensitive hydrogels were prepared by means of -irradiation of poly(-glutamic acid) (PGA) produced byBacillus subtilis IFO3335 and poly(-lysine) (PL) produced byStreptomyces albulus in aqueous solutions. The preparation conditions, swelling equilibria, hydrolytic degradation, and enzymatic degradation of these hydrogels were studied. A hydrogel with a wide variety of swelling behaviors has been produced by -irradiation from a mixture solution of PGA and PL.Paper presented at the 4th International Workshop on Biodegradable Plastics and Polymers, October 11–14, 1995, Durham, New Hampshire, USA.     

Synthesis of copolyesters containing poly(ethylene terephthalate) and poly(ε-caprolactone) units and their susceptibility toPseudomonas sp. lipase

Copolyesters containing poly(ethylene terephthalate) (PET) and poly(-caprolactone) (PCL) were synthesized from PET and PCL homopolymers by transesterification reaction at 270°C in the presence of catalyst. The copolyesters were characterized by¹³C-NMR and differential scanning calorimetry (DSC). The degradation behavior of PCL byPseudomonas sp. lipase in buffer solution (pH 7) and tetrahydrofuran (THF) was investigated by gel permeation chromatography (GPC) and¹H-NMR. From these experiments, it was found thatPseudomonas sp. lipase acted endoenzymatically on PCL. Using this lipase, degradation tests for PET/PCL copolyesters whose PCL content was below 50% by weight were also performed in buffer solution (pH 7). However, evenPseudomonas sp. lipase with high degradation activity on PCL did not easily degrade the PCL unit in PET/PCL copolyesters.     

Synthesis and environmental degradation of polyesters based on poly (ε-caprolactone)

Poly (-caprolactone) (PCL), poly (-valerolactone) (PVL), poly (-caprolactone-co--valerolactone) [P(CL-co-VL)], and poly (-caprolactone-co-ethylene oxide-co--caprolactone) (PCL-PEO-PCL) were synthesized by ring-opening and diol-initiated polymerization of -caprolactone and -valerolactone. The degradation of the samples by chemical hydrolysis and in a soil burial test was evaluated. It was found that PCL, PVL, and P(CL-co-VL) degrade mainly enzymatically. The rate of degradation depends on their molecular weight, chemical structure, composition, and morphology. PCL-PEO-PCL block copolymers exhibit a repelling effect to the microorganisms in the soil, which depends on the molecular weight and relative amount of PEO block in the copolymer.     

Physical properties and biodegradability of blends containing poly(ε-caprolactone) and tropical starches

In order to assess feasibility of tropical starches (sago and cassava starches) as biodegradable plastic materials, blending with poly(-caprolactone) (PCL), a biodegradable polymer, was carried out. It was confirmed that the physical properties (tensile strength and elongation) of PCL/sago and PCL/cassava blends were similar to those of PCL/corn blend, suggesting that sago and cassava starches can also be blended with PCL for production of biodegradable plastic. However, the properties of all PCL/starch blends were still low compared with those of polyethylene. Enzymatic degradability evaluation showed that lipase degradation of PCL and-amylase degradation of starch increased as the starch content in the blend increased. Burial test of the blends for 1, 3, and 5 months was carried out and the rate of degradation of the PCL/sago blend was confirmed to be slower than those of PCL/corn and PCL/cassava blends. Observation of the film blends structure by scanning electron microscope revealed that the starch was dispersed in a PCL continuous phase. Furthermore, changes in the film surface before and after enyzme treatments were observed.     

Degradation of poly(β-hydroxyalkanoates) and polyolefin blends in a municipal wastewater treatment facility

Six types of plastics and plastic blends, the latter composed at least partially of biodegradable material, were exposed to aerobically treated wastewater (activated sludge) to ascertain their biodegradability. In one study, duplicate samples of 6% starch in polypropylene, 12% starch in linear low-density polyethylene, 30% polycaprolactone in linear low-density polyethylene, and poly(-hydroxybutyrate-co-hydroxyvalerate) (PHB/V), a microbially produced polyester, were exposed to activated sludge for 5 months, and changes in mass, molecular weight average, and tensile properties were measured. None of the blended material showed any sign of degradation. PHB/V, however, showed a considerable loss of mass and a significant loss of tensile strength. In a second study, PHB/V degraded rapidly, but another type of microbial polymer which forms a thermoplastic elastomer, poly(-hydroxyoctanoate), did not degrade. These results illustrate the potential for disposal and degradation of PHB/V in municipal wastewater.     

A method for the isolation of microorganisms producing extracellular long-side-chain poly (β-hydroxyalkanoate) depolymerase

A simple method was developed for the preparation of an autoclavable, long-side-chain poly (-hydroxyalkanoate) (LSC-PHA) colloidal suspension, which was used as a substrate for enzymatic degradation and to prepare agar overlay plates for the isolation of microorganisms producing extracellular LSC-PHA depolymerase. Six cultures producing extracellular LSC-PHA depolymerase were isolated from a composted hydrocarbon-contaminated soil. All were pseudomonads or related bacteria. All (with the possible exception ofXanthomonas maltophilia) could produce LSC PHA. Except forX. maltophilia none could hydrolyze poly (-hydroxybutyrate). Screening of sevenPseudomonas strains known to accumulate LSC PHA showed that all were negative for extracellular LSC-PHA depolymerase production. It was concluded that extracellular LSC-PHA depolymerase producers are found mostly in the genusPseudomonas but that they are relatively uncommon.     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

Hydrolytic and enzymatic degradation of poly(γ-glutamic acid) hydrogels and their application in slow-release systems for proteins

The hydrolytic and enzymatic degradation of newly developed hydrogels, produced by cross-linking purified poly(-glutamic acid) (PGA) with dihaloalkane compounds, was studied and is reported in this paper. Analysis of hydrolysis of the hydrogel as a function of pH indicated that the hydrolysis occurred slowly at neutral pH, but fast in both acidic and alkaline solutions, while the polymer could be hydrolyzed rapidly only in acidic solutions. The ester bonds were more sensitive to hydrolysis than peptide bonds. The biodegradability of the hydrogel and polymer was further confirmed when enzymatic degradation was studied by three enzymes (cathepsin B, pronase E, and trypsin), which were able to cleave both ester and peptide bonds gradually. A slow-release system for porcine somatotropin (pST) formed by using the hydrogel as matrix to entrap the hormone was evaluatedin vitro andin vivo. Results demonstrated that the hydrogel was able to release the hormone for a period of 20–30 days and indicated its potential application in slow-release systems for bioactive materials, especially macromolecules, such as peptides and proteins.     

Influence of Processing Additives on the Degradation of Melt-Pressed Films of Poly(ε-Caprolactone) and Poly(Lactic Acid)

Melt-pressed films of polycaprolactone (PCL) and poly(lactic acid) (PLA) with processing additives, CaCO₃, SiO₂, and erucamide, were subjected to pure fungal cultures Aspergillus fumigatus and Penicillium simplicissimum and to composting. The PCL films showed a rapid weight loss with a minor reduction in the molecular weight after 45 days in A. fumigatus. The addition of SiO₂ to PCL increased the rate of (bio)erosion in A. fumigatus and in compost. The use of a slip additive, erucamide, was shown to modify the properties of the film surface without decreasing the rate of bio(erosion). Both the rate of weight loss and the rate of molecular weight reduction of PCL increased with decreasing film thickness. The addition of CaCO₃ to PLA significantly reduced the thermal degradation during processing, but it also reduced the rate of the subsequent (bio)degradation in the pure fungal cultures. PLA without additives and PLA containing SiO₂ exhibited the fastest (bio)degradation, followed by PLA with CaCO₃. The degradation of the PLA films was initially governed by chemical hydrolysis, followed by an acceleration of the weight change and of the molecular weight reduction. PLA film subjected to composting exhibits a rapid decrease in molecular weight, which then remains unchanged during the measurement period, probably because of crystallization.     

Effects of Poly(Ethylene Glycol) on the Production of Poly(β-Hydroxybutyrate) by Azotobacter vinelandii UWD

Azotobacter vinelandii UWD, ATCC 53799, an engineered strain derived from Azotobacter vinelandii UW was used in the poly(ethylene glycol) (PEG)-modulated synthesis of poly(-hydroxybutyrate) (PHB). To the best of our knowledge, this is the first report on modulating the production of PHB by amending the fermentation broth with PEG using A. vinelandii UWD. It was determined that A. vinelandii UWD is prone to back-mutation to the parent strain; hence fermentation experiments require the use of the antibiotic rifampicin. Diethylene glycol (DEG) and PEGs with molecular weights of 400, 2000, and 3400 Da and pentaerythritol ethoxylate (PEE) were used in the modulated fermentation experiments in a concentration of 2% (w/v). The molecular weight of the resulting polymers was reduced by up to 78%. No impact on the productivity of the strain was observed. Spectroscopic evidence showed that PEG-modulated synthesis resulted in the covalent attachment of the ethylene glycol moiety only when a small molecule, DEG, was used. PEGs had the same effects on the polymer formation in terms of molecular weight reduction as DEG, but no spectroscopic evidence was found for the formation of a covalent linkage between PHB and higher molecular weight PEGs.     

The Effect of UV-B Irradiation on the Biodegradability of Poly-β-Hydroxybutyrate (PHB) and Poly-ɛ-Caprolactone (PCL)

The biodegradability of poly--hydroxybutyrate and poly--caprolactone in soil compostage before and after irradiation of the polymers for 192, 425, and 600 h in a Weather-Ometer was examined. The biodegradability tests were done in soil compostage at pH 7.0, 9.0, and 11.0 to assess the influence of this parameter on degradation. The rate of degradation was directly proportional to the soil alkalinity. Poly--hydroxybutyrate showed the greatest weight loss and aging in a Weather-Ometer did not significantly increase the biodegradation, except when the polymer was aged for 425 h and buried in soil compostage of pH 11.0.     

Deterioration of Polyamideamine–Epichlorohydrin (PAE) in Aqueous Solutions During Storage: Structural Changes of PAE

Structural changes of polyamideamine–epichlorohydrin (PAE) in solution during storage at 4 °C and pH 4.2–4.5 for up to 8.9 years were studied by ¹H- and ¹³C-NMR analyses, colloidal titration and others. NMR signals due to 3-hydroxy-azetidinium groups of PAE decreased during storage, and correspondingly 2, 3-dihydroxypropyl groups were formed by the ring opening. The content of 3-hydroxy-azetidinium groups in PAE determined by ¹H-NMR were similar to that determined by the colloidal titration, although the former was higher than the latter. About 50% of the 3-hydroxy-azetidinium groups present in the fresh PAE were lost during storage for 8.9 years. Furthermore, ¹³C-NMR analysis revealed that significant depolymerization of polyamideamine chains occurred by hydrolysis of the amide linkages during storage. Rough evaluation of number average degree of polymerization (DPn) of the amideamine repeating unit showed that the DPn decreased from 12 to 2 during storage for 8.9 years.     

Study of Trace and Heavy Metals in Rural and Urban Aerosols of Uludağ and Bursa (Turkey)

The concentrations of heavy, trace elements and major ions measuredin the Uluda and Bursa aerosols were investigated to assess size distributions, spatial and temporal variability, sources and source regions affecting the composition of aerosols in Uluda and Bursa. A total of 81 samples were collected in two sites, one in Bursa city and another in the Uluda Mountain during two sampling campaigns. Daily samples were collected using a high volume sampler on Whatman 41 cellulose filters in Uluda, while three days interval samples were collected in Bursa using an automatic dichotomous sampler on PTFE Teflon filters. Samples were analysed for 15 trace and heavy metals (Al, Fe, Ba, Na, Mg, K, Mn, Ca, Cu), (V, Pb, Cd, Cr, Ni, Zn), and 4 major ions (SO₄ ^2-, NO₃ ^-, Cl^-), (NH₄ ⁺) using ICP-AES, GFAAS, HPLC and UV/VIS Spectrophotometer,respectively. In general, concentrations of the metals measured inUluda aerosols were lower than those in Bursa. The concentrations of crustal elements were higher in summer than winter, while anthropogenic elements had higher concentrations in winter than summer. Most of the mass of crustal elements was concentrated in the coarse mode while the mass of the heavy metals was concentrated in the fine mode. Factor analysis revealed four factors with sources including crustal, industrial and combustion. Back trajectory calculations were used to determine long range contributions. These calculations showed that contributions were mostly from European countries, former Soviet Union countries, Black Sea and North Africa.     

Effect of Matrix–Particle Interfacial Adhesion on the Mechanical Properties of Poly(lactic acid)/Wood-Flour Micro-Composites

The influence of interfacial matrix/particle adhesion on the mechanical properties of poly(lactic acid) (PLA) micro-composites was investigated. The tensile strength of PLA/wood-flour micro-composites is almost independent of wood-flour content, suggesting only weak adhesion exists between the PLA matrix and the wood-flour particles. The addition of wood-flour resulted in an increase of up to 95% in the tensile modulus, in comparison with pure PLA, which showed a more resilient matrix. The addition of a coupling agent, methylenediphenyl-diisocyanate (MDI) to the composition resulted in an increase in tensile strength and tensile modulus of the micro-composites, of 10 and 135%, respectively, indicating enhanced matrix–particle interfacial adhesion. SEM and electron probe microanalysis provided evidence of improved interfacial adhesion between PLA and wood-flour particles from the addition of MDI. In contrast, addition of PEAA resulted in a micro-composite displaying substantially reduced tensile strength, up to 35% and a slightly increased in impact strength, up to 15%, consistent with the introduction of the rubbery PEAA component into the polymeric matrix. No evidence for increased matrix–particle adhesion was found for the PLA/wood-flour micro-composites containing PEAA.     

Radiation Effects on Blends of Poly(ε-Caprolactone) and Diatomites

Poly(-caprolactone) (PCL) was blended with diatomaceous earth (diatomite) and irradiated with -rays to introduce cross-linking between PCL molecules or both components. The unwashed diatomite containing a little of a volatile component showed high efficiency of introduction of cross-linking, whereas that with no volatile component showed low efficiency of introduction of cross-linking. Elongational viscosity, melt viscosity, and modulus of PCL/diatomite blend irradiated at various doses were significantly improved. Enzymatic degradation of the PCL/diatomite blend became faster than that of the PCL, though that of the blend irradiated became slower.