Mesoporous BiVO4/2D-g-C3N4 heterostructures for superior visible light-driven photocatalytic reduction of Hg(II) ions

In this contribution, a Z-scheme mesoporous BiVO₄/g-C₃N₄ nanocomposite heterojunction with a considerable surface area and high crystallinity was synthesized by a simple soft and hard template-assisted approach. This material demonstrates superior visible light-driven photocatalysis for the photoreduction of Hg(II) ions. TEM and XRD results show that the mesoporous BiVO₄ NPs, with a monoclinic phase and an ellipsoid-like shape, are highly dispersed onto the porous 2D surfaces of g-C₃N₄ nanosheets with a particle size of 5–10 nm. The obtained BiVO₄/g-C₃N₄ nanocomposites with a p-n heterojunction show significantly enhanced Hg(II) photoreduction efficiency compared to the mesoporous BiVO₄ NPs and pristine g-C₃N₄. Among all synthesized photocatalysts, the 1.2% BiVO₄/g-C₃N₄ nanocomposite indicated the highest photoreduction of Hg(II) performance, reaching ~ 100% within 60 min; this result is 3.9 and 4.5 –fold larger than that of the BiVO₄ NPs and pristine g-C₃N₄. The Hg(II) photoreduction rates highly increase to 208.90, 314.95, 411.23 and 418.68 μmol g⁻¹min⁻¹ for the mesoporous 0.4, 0.8, 1.2 and 1.6% BiVO₄/g-C₃N₄ nanocomposites, respectively. The reduction rate of the mesoporous 1.2% BiVO₄/g-C₃N₄ nanocomposite demonstrated a 5.2 and 3.8 times larger increase than that of the pristine g-C₃N₄ nanosheets and pure BiVO₄ NPs. The superior Hg(II) photoreduction efficiency was ascribed to decreased carrier recombination and the improved utilization of visible light by constructing BiVO₄/g-C₃N₄ nanocomposites with a p-n junction. Transient photocurrent measurement and photoluminescence spectra were employed to confirm the possible Hg(II) photoreduction mechanism over these BiVO₄/g-C₃N₄ photocatalysts. This research provides an accessible route for the nanoengineered design of mesoporous BiVO₄/g-C₃N₄ heterostructures that demonstrated unique photocatalytic performance.     

0D CoP cocatalyst/ 2D g-C3N4 nanosheets: An efficient photocatalyst for promoting photocatalytic hydrogen evolution

In this work, cobalt phosphide (CoP) nanoparticles were successfully decorated on an ultrathin g-C₃N₄ nanosheet photocatalysts by in situ chemical deposition. The built-in electric field formed by heterojunction interface of the CoP/g-C₃N₄ composite semiconductor can accelerate the transmission and separation of photogenerated charge-hole pairs and effectively improve the photocatalytic performance. TEM, HRTEM, XPS, and SPV analysis showed that CoP/g-C₃N₄ formed a stable heterogeneous interface and effectively enhanced photogenerated electron-hole separation. UV-vis DRS analysis showed that the composite had enhanced visible light absorption than pure g-C₃N₄ and was a visible light driven photocatalyst. In this process, NaH₂PO₂ and CoCl₂ are used as the source of P and Co, and typical preparation of CoP can be completed within 3 hours. Under visible light irradiation, the optimal H₂ evolution rate of 3.0 mol% CoP/g-C₃N₄ is about 15.1 μmol h⁻¹. The photocatalytic activity and stability of the CoP/g-C₃N₄ materials were evaluated by photocatalytic decomposition of water. The intrinsic relationship between the microstructure of the composite catalyst and the photocatalytic performance was analyzed to reveal the photocatalytic reaction mechanism.     

Preparation and photocatalytic activity of g-C3N4/TiO2 heterojunctions under solar light illumination

The solar light sensitive g-C₃N₄/TiO₂ heterojunction photocatalysts containing 20, 50, 80, and 90 wt% graphitic carbon nitride (g-C₃N₄) were prepared by growing Titania (TiO₂) nanoparticles on the surfaces of g-C₃N₄ particles via one step hydrothermal process. The hydrothermal reactions were allowed to take place at 110 °C at autogenous pressure for 1 h. Raman spectroscopy analyses confirmed that an interface developed between the surfaces of TiO₂ and g-C₃N₄ nanoparticles. The photocatalyst containing 80 wt% g-C₃N₄ was subsequently heat treated 1 h at temperatures between 350 and 500 °C to improve the photocatalytic efficiency. Structural and optical properties of the prepared g-C₃N₄/TiO₂ heterojunction nanocomposites were compared with those of the pristine TiO₂ and pristine g-C₃N₄ powders. Photocatalytic activity of all the nanocomposites and the pristine TiO₂ and g-C₃N₄ powders were assessed by the Methylene Blue (MB) degradation test under solar light illumination. g-C₃N₄/TiO₂ heterojunction photocatalysts exhibited better photocatalytic activity for the degradation of MB than both pristine TiO₂ and g-C₃N₄. The photocatalytic efficiency of the g-C₃N₄/TiO₂ heterojunction photocatalyst heat treated at 400 °C for 1 h is 1.45 times better than that of the pristine TiO₂ powder, 2.20 times better than that of the pristine g-C₃N₄ powder, and 1.24 times better than that of the commercially available TiO₂ powder (Degussa P25). The improvement in photocatalytic efficiency was related to i) the generation of reactive oxidation species induced by photogenerated electrons, ii) the reduced recombination rate for electron-hole pairs, and iii) large specific surface area.     

Light-transmitting AlON carrier with enhanced photocatalytic degradation performance

A skeleton structure AlON (aluminum oxynitride) carrier with light transmission performance was prepared by carbothermal reduction and nitridation (CRN). The AlON carrier can disperse nano active components and enhance its photocatalytic performance. The microstructure of the TiO₂/AlON composite photocatalyst shows that the dispersion of the agglomerated TiO₂ is achieved by the physical adsorption mechanism, the embedding mechanism and the single particle dispersion mechanism. The morphology of the BiVO₄/AlON and g-C₃N₄/AlON composite photocatalysts further proves the universality of the AlON carrier in the dispersion of nano photocatalyst. The photocatalytic performance of the nano active component was enhanced by combining with AlON carrier. After 240 min of visible light irradiation, the degradation rate of MB increased by 7.4% (BiVO₄/AlON) and 8.1% (g-C₃N₄/AlON), respectively. High light transmittance was the main reason for AlON carrier to improve the photocatalytic performance of loaded active components. In addition, AlON carrier type composite photocatalyst can be reused for many times because it has physicochemical stability and can be recovered easily.     

Enhanced interfacial electronic transfer of BiVO4 coupled with 2D g-C3N4 for visible-light photocatalytic performance

A BiVO₄/2D g-C₃N₄ direct dual semiconductor photocatalytic system has been fabricated via electrostatic self-assembly method of BiVO₄ microparticle and g-C₃N₄ nanosheet. According to experimental measurements and first-principle calculations, the formation of built-in electric field and the opposite band bending around the interface region in BiVO₄/2D g-C₃N₄ as well as the intimate contact between BiVO₄ and 2D g-C₃N₄ will lead to high separation efficiency of charge carriers. More importantly, the intensity of bulid-in electric field is greatly enhanced due to the ultrathin nanosheet structure of 2D g-C₃N₄. As a result, BiVO₄/2D g-C₃N₄ exhibits excellent photocatalytic performance with the 93.0% Rhodamine B (RhB) removal after 40 min visible light irradiation, and the photocatalytic reaction rate is about 22.7 and 10.3 times as high as that of BiVO₄ and 2D g-C₃N₄, respectively. In addition, BiVO₄/2D g-C₃N₄ also displays enhanced photocatalytic performance in the degradation of tetracycline (TC). It is expected that this work may provide insights into the understanding the significant role of built-in electric field in heterostructure and fabricating highly efficient direct dual semiconductor systems.     

Novel g-C3N4 nanosheets/CDs/BiOCl photocatalysts with exceptional activity under visible light

We fabricated novel ternary nanocomposites through integration of C-dots (carbon dots), BiOCl, and nanosheets of graphitic carbon nitride (g-C₃N₄ nanosheets) by a cost-effective route. The fabricated photocatalysts were subsequently characterized by XRD, EDX, TEM, HRTEM, XPS, FT-IR, UV-vis DRS, TGA, BET, and PL methods to gain their structure, purity, morphology, optical, textural, and thermal properties. In addition, the degradation intermediates were identified by gas chromatography-mass spectroscopy (GC-MS). Photocatalytic performance of the synthesized samples was studied by photodegradations of three cationic (RhB, MB, and fuchsine), one anionic (MO) dyes, one colorless (phenol) pollutant and removal of an inorganic pollutant (Cr(VI)) under visible light. It was revealed that the ternary nanocomposite with loading 20% of BiOCl illustrated superlative performances in the selected photocatalytic reactions compared with the corresponding bare and binary photocatalysts. Visible-light photocatalytic activity of the g-C₃N₄ nanosheets/CDs/BiOCl (20%) nanocomposite was 42.6, 27.8, 24.8, 20.2, and 15.9 times higher than the pure g-C₃N₄ for removal of RhB, MB, MO, fuchsine, and phenol, respectively. Likewise, the ternary photocatalyst showed enhanced activity of 15.3 times relative to the g-C₃N₄ in photoreduction of Cr(VI). Moreover, the ternary nanocomposite exhibited excellent chemical stability and recyclability after five cycles. Finally, the mechanism for improved photocatalytic performance was discussed based on the band potential positions.     

Visible-light-driven Ni3FeN/g-C3N4 Z-scheme heterostructure for remarkable photocatalytic water splitting

It is very essential to grow efficient and abundant photocatalysts for overall water cracking to produce hydrogen. Ni₃FeN nanosheets were synthesized by combining simple sol–gel and calcining methods using urea as nitrogen source. A heterostructure was constructed between Ni₃FeN and g-C₃N₄ to enhance the absorption capacity of visible light. The reformed Z-scheme Ni₃FeN/g-C₃N₄ heterojunction exhibited an excellent visible-light photocatalytic activity. The average hydrogen evolution rate of 5 wt% Ni₃FeN/g-C₃N₄ composite is 528.7 μmol h⁻¹ g⁻¹ due to the Z-scheme Ni₃FeN/g-C₃N₄ junction, which promotes the separation of photogenerated e⁻/h⁺. Interestingly, the average H₂ production of Ni₃FeN/g-C₃N₄ is nearly 8.3 and 3.6 times higher than that of Fe₄N/g-C₃N₄ and Ni₄N/g-C₃N₄, respectively, indicating that bimetallic nitrides as cocatalysts are more conducive to enhancing the performance of photocatalysts. Importantly, the Ni₃FeN/g-C₃N₄ composite exhibited good cycle stability, and the hydrogen production performance hardly changed after four cycle experiments. Furthermore, photoluminescence, electrochemical impedance spectroscopy, and transient photocurrent response show that Ni₃FeN/g-C₃N₄ heterojunction improves the separation efficiency of photoinduced e⁻/h⁺. This work provides a feasibility of the cocatalyst Ni₃FeN for use in photocatalytic hydrogen production.     

Ti3C2@TiO2/g-C3N4 heterojunction photocatalyst with improved charge transfer for enhancing visible-light NO selective removal

Control of Nitrogen dioxide (NO₂) byproducts is of great importance for the photocatalytic NO removal and environmental remedy. However, individual semiconductor photocatalysts generally show limited capabilities for selective NO removal due to severe charge recombination and inadequate redox potentials. Herein, the cotton-like g-C₃N₄ was modified with Ti₃C₂@TiO₂ to construct a heterojunction photocatalyst Ti₃C₂@TiO₂/g-C₃N₄, which showed outperformed photocatalytic NO removal and MB degradation abilities compared to the individual photocatalysts under visible light irradiation. The UV–vis absorption spectra and photoluminescence (PL) spectra confirmed that Ti₃C₂@TiO₂/g-C₃N₄ photocatalyst was endowed with superior light utilization and separation/transfer ability of charge carriers due to the presence of n-n heterojunction and Schottky barrier. Furthermore, the g-C₃N₄, Ti₃C₂, and TiO₂ were closely contacted showing a high specific surface area, which promoted the charge transfer and the exposure of more active sites, further inducing the formation of more active species. Therefore, the designed photocatalyst delivered a high removal rate of NO and a suppressed discharge of NO₂. Notably, the photocatalyst Ti₃C₂@TiO₂/g-C₃N₄ also presented superior NO removal ability during the cycling experiment, indicating their outstanding stability and recyclability. Besides, the effects of active species were monitored using a trapping experiment to propose probable photocatalytic mechanism. This study could shed a new light to the design of photocatalyst for air purification in the future.     

Novel spindle-shaped nanoporous TiO2 coupled graphitic g-C3N4 nanosheets with enhanced visible-light photocatalytic activity

Highly efficient visible-light-driven heterojunction photocatalysts, spindle-shaped nanoporous TiO₂ coupled with graphitic g-C₃N₄ nanosheets have been synthesized by a facile one-step solvothermal method. The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption analysis and UV–vis diffuse reflectance spectrometry (DRS), proving a successful modification of TiO₂ with g-C₃N₄. The results showed spindle-shaped nanoporous TiO₂ microspheres with a uniform diameter of about 200 nm dispersed uniformly on the surface of graphitic g-C₃N₄ nanosheets. The g-C₃N₄/TiO₂ hybrid materials exhibited higher photocatalytic activity than either pure g-C₃N₄ or nanoporous TiO₂ towards degradation of typical rhodamine B (RhB), methyl blue (MB) and methyl orange (MO) dyes under visible light (>420 nm), which can be largely ascribed to the increased light absorption, larger BET surface area and higher efficient separation of photogenerated electron–hole pairs due to the formation of heterostructure. In addition, the possible transferred and separated behavior of electron–hole pairs and photocatalytic mechanisms on basis of the experimental results are also proposed in detail.     

Soft Template-Assisted Controllable Synthesis of Nanocrystalline Orthorhombic YFeO3 Decorated Porous g-C3N4 with Enhanced Hg(II) reduction

Mesoporous single-crystalline perovskite YFeO₃ nanoparticles was synthesized through a soft template-assisted approach. Mesoporous YFeO₃ NPs were decorated porous g-C₃N₄ nanosheets with variation YFeO₃ NPs percentages, and the newly synthesized photocatalysts were assessed towards Hg(II) reduction and HCOOH oxidation in aqueous solution upon visible light exposure. XRD and HR-TEM revealed the formation of single-crystalline orthorhombic YFeO₃ with uniformly dispersed and the average particle size of 10?±?5 nm_, thereby constructing a mesoporous YFeO₃/g-C₃N₄ heterojunctions for the promotion of the photocatalytic performances compared to bare YFeO₃ NPs and g-C₃N₄. 3% YFeO₃/g-C₃N₄ heterostructure revealed the highest and optimum Hg(II) reduction (100%) within 60 min, which determined 3.7 and 5 times larger than of bare YFeO₃ NPs and g-C₃N₄ obeyed by pseudo-first-order kinetics. The YFeO₃/g-C₃N₄ photocatalyst could be recycled five continuous cycles and kept remarkable photostability for long time illumination. The superior Hg(II) reduction over mesoporous YFeO₃/g-C₃N₄ heterojunction is referred to as lower recombination of carriers, the unique electronic structure, higher visible light utilization and high surface area. This work focused on constructing the YFeO₃/g-C₃N₄ heterojunction, indicating outstanding photocatalytic performances in a facile route.

     

Effects of solvent-induced morphology evolution of Zn2GeO4 on photocatalytic activities of g-C3N4/Zn2GeO4 composites

Morphology modulation of photocatalyst has been demonstrated to be a crucial strategy for improving the catalytic performance in solar energy conversion system. Here we systematically investigated the influence of the solvent-dependent morphology evolution of Zn₂GeO₄ phase on the photocatalytic efficiency of the as-prepared g-C₃N₄/Zn₂GeO₄ composites. The morphologies of Zn₂GeO₄ were rationally tuned from flower-like nanosheets to length-controllable nanorods, and microclusters assembled from microrods through regulating the solution polarity of different organic solvents. Accordingly, the Zn₂GeO₄ sample prepared in ethylene glycol (EG) with long rod-like morphology and integrated with g-C₃N₄, abbreviated as g-C₃N₄/Zn₂GeO₄(1:1)-EG, exhibited the best visible-light absorption ability and the highest efficiency. The synergetic effect of the long rod-like Zn₂GeO₄ phase with many exposed (110) crystalline facets and g-C₃N₄ accelerates the separation and interface transportation of photoexcited charge carriers, as confirmed by photocurrent measurements. The MB degradation mechanism was also proposed to clarify the charge-transfer process and the improved photodegradation activity. This study offers an experimental basis for understanding the significance of morphology control on rational design of photocatalysts with improved performance.     

Amino group-rich porous g-C3N4 nanosheet photocatalyst: Facile oxalic acid-induced synthesis and improved H2-evolution activity

The reasonable modulation of tri-s-triazine structure units of g-C₃N₄ is an effective method to optimize its intrinsic electronic and optical properties, thus boosting its photocatalytic hydrogen-evolution activity. Herein, amino groups are successfully introduced into the tri-s-triazine structure units of g-C₃N₄ nanosheets to improve their H₂-evolution activity via a facile oxalic acid-induced supramolecular assembly strategy. In this case, the resulting amino group-rich porous g-C₃N₄ nanosheets display a loose and fluffy structure with a large specific surface area (70.41 m² g^?1) and pore volume (0.50 cm³? g^??1), and enhanced visible-light absorption (450–800 nm). Photocatalytic tests reveal that the amino group-rich porous g-C₃N₄ nanosheets (AP-CN1.0 nanosheets) exhibit a significantly elevated photocatalytic H₂-production activity (130.7 μmol h^?1, AQE = 5.58%), which is much greater than that of bulk g-C₃N₄ by a factor of 4.9 times. The enhanced hydrogen-generation performance of amino group-rich porous g-C₃N₄ nanosheets can be mainly attributed to the introduction of more amino groups, which can reinforce the visible-light absorption and work as the interfacial hydrogen-generation active centers to boost the photocatalytic hydrogen production. The present facile and effective regulation of tri-s-triazine structure units may provide an ideal route for the exploitation of novel and highly efficient g-C₃N₄ photocatalysts.     

Constructing 0D/2D Z-Scheme Heterojunction of CdS/g-C3N4 with Enhanced Photocatalytic Activity for H2 Evolution

0D/2D Pt-C₃N₄/CdS heterojunction photocatalyst were fabricated with CdS quantum dots interspersed on g-C₃N₄ nanosheets via successive ionic layer absorption process. The obtained Pt-C₃N₄/CdS Z-scheme heterojunction with Pt cocatalyst deposited on g-C₃N₄ nanosheets exhibited H₂ production rate of 35.3 mmol g^?1 h^?1, which is 3.1 times higher than that of Pt-CdS/C₃N₄. The enhanced photocatalytic activity are attributed to the Z-scheme charge carrier transfer mechanism with stronger redox ability. The photocatalytic mechanism of the CdS/g-C₃N₄ composite is investigated and demonstrated in this work. It may provide unique insights to design 0D/2D Z-scheme heterojunction photocatalyst systems using a facile method for highly efficient H₂ production.

Graphic Abstract

Schematic illustration of charge transfer modulated by the metal cocatalyst selective deposition on heterojunction-type II (a) and direct Z-Scheme mechanisms (b) over the C₃N₄/CdS heterostructure composites under visible light irradiation.

     

Synthesis of MoS2/g-C3N4 as a solar light-responsive photocatalyst for organic degradation

A novel molybdenum disulfide (MoS₂) and graphitic carbon nitride (g-C₃N₄) composite photocatalyst was synthesized using a low temperature hydrothermal method. MoS₂ nanoparticles formed on g-C₃N₄ nanosheets greatly enhanced the photocatalytic activity of g-C₃N₄. The photocatalyst was tested for the degradation of methyl orange (MO) under simulated solar light. Composite 3.0 wt.% MoS₂/g-C₃N₄ showed the highest photocatalytic activity for MO decomposition. MoS₂ nanoparticles can increase the interfacial charge transfer and thus prevent the recombination of photo-generated electron–hole pairs. The novel MoS₂/g-C₃N₄ composite is therefore shown as a promising catalyst for photocatalytic degradation of organic pollutants using solar energy.     

Rational design of MoS2/g-C3N4/ZnIn2S4 hierarchical heterostructures with efficient charge transfer for significantly enhanced photocatalytic H2 production

The rational design of hierarchical heterojunction photocatalysts with efficient spatial charge separation remains an intense challenge in hydrogen generation from photocatalytic water splitting. Herein, a noble-metal-free MoS₂/g-C₃N₄/ZnIn₂S₄ ternary heterostructure with a hierarchical flower-like architecture was developed by in situ growth of 3D flower-like ZnIn₂S₄ nanospheres on 2D MoS₂ and 2D g-C₃N₄ nanosheets. Benefiting from the favorable 2D-2D-3D hierarchical heterojunction structure, the resultant MoS₂/g-C₃N₄/ZnIn₂S₄ nanocomposite loaded with 3 wt% g-C₃N₄ and 1.5 wt% MoS₂ displayed the optimal hydrogen evolution activity (6291 μmol g^?1 h^?1), which was a 6.96-fold and 2.54-fold enhancement compared to bare ZnIn₂S₄ and binary g-C₃N₄/ZnIn₂S₄, respectively. Structural characterizations reveal that the significantly boosted photoactivity is closely associated with the multichannel charge transfer among ZnIn₂S₄, MoS₂, and g-C₃N₄ components with suitable band-edge alignments in the composites, where the photogenerated electrons migrate from g-C₃N₄ to ZnIn₂S₄ and MoS₂ through the intimate heterojunction interfaces, thus enabling efficient electron-hole separation and high photoactivity for hydrogen evolution. In addition, the introduction of MoS₂ nanosheets highly benefits the improved light-harvesting capacity and the reduced H₂-evolution overpotential, further promoting the photocatalytic H₂-evolution performance. Moreover, the MoS₂/g-C₃N₄/ZnIn₂S₄ ternary heterostructure possesses prominent stability during the photoreaction process owing to the migration of photoinduced holes from ZnIn₂S₄ to g-C₃N₄, which is deemed to be central to practical applications in solar hydrogen production.     

One-Step Synthesis of g-C3N4 Nanosheets with Enhanced Photocatalytic Performance for Organic Pollutants Degradation Under Visible Light Irradiation

Graphitic carbon nitride (g-C₃N₄) has received much interest as a visible-light-driven photocatalyst for degrading pollutants such as organic dyes and antibiotics. However, g-C₃N₄ bulk activity could not meet expectations due to its rapid recombination of photogenerated electron–hole pairs and low specific surface area. In our study, melamine was thermally treated one-step in the presence of NH₄Cl to produce g-C₃N₄ nanosheets. The characterizations of surface morphology and optical properties of all g-C₃N₄ samples were investigated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectrum (XPS), transmission electron microscopy (TEM), and UV–visible diffuse reflectance spectroscopy. Compared to bulk g-C₃N₄, g-C₃N₄ nanosheets demonstrated excellent photocatalytic activities, with approximately 98% RhB removal after 210 min of visible light irradiation. Furthermore, the effect of catalyst dosage, pH, and RhB concentration on the removal percentage dye of g-C₃N₄ nanosheets was also investigated. h⁺ and ^?O₂^? species were demonstrated as the key reactive species for the RhB. Besides, ECN exposed a tetracycline degradation efficiency of 80.5% under visible-light irradiation for 210 min, which is higher than BCN (60.8%). The improved photocatalytic activity of g-C₃N₄ nanosheets is due to the restriction of the recombination of photogenerated electrons/hole pairs, as provided by photoluminescence spectra and Nyquist plot. As a result, our research may offer an effective approach to fabricating g-C₃N₄ nanosheets with high photocatalytic activity and high stability for environmental decontamination.

     

Enhanced photocatalytic hydrogen evolution over TiO2/g-C3N4 2D heterojunction coupled with plasmon Ag nanoparticles

2D heterojunction based on g-C₃N₄ nanosheets with other semiconductor nanosheets is a promising way to improve photocatalytic hydrogen evolution (PHE) activity over g-C₃N₄. However, current 2D heterojunction based on g-C₃N₄ are unsatisfactory due to their insufficient absorption of visible light and inefficient charge separation. In this work, Ag/TiO₂/g-C₃N₄ nanocomposites based on 2D heterojunction coupling with Ag surface plasmon resonance (SPR) were synthesized by a method combining facile wetness impregnation calcination. The PHE activity of Ag/TiO₂/g-C₃N₄ nanocomposites is attributed to the TiO₂/g-C₃N₄ 2D heterojunction and bare g-C₃N₄ nanosheet under visible light irradiation, indicating a cooperative effect between Ag and TiO₂/g-C₃N₄ 2D heterojunction. As a result of SPR effect, the composites strongly absorb visible light. In addition, the oscillating hot electrons from Ag can easily transfer to 2D heterojunction. This synergistic effect lead to sufficient visible light absorption and efficient charge separation of 2D heterojunction, which improved the PHE activity of g-C₃N₄. This work indicates that loading metal nanoparticles on 2D heterojunction as metal SPR-2D heterojunction nanocomposites may be a potential method for harvesting visible light for PHE.     

Construction of BiVO4 microspheres sensitized TiO2 NTAs for the enhanced photocatalytic mineralization of organic dyes

In the present work, BiVO₄ microspheres were deposited on TiO₂ NTAs via the solvothermal method using urea as the mineralizer. The binary heterojunction formation significantly enhanced the solar response region and intensity, and the electron transfer path was built at the interface of two semiconductors, which was the main reason for the enhanced photoelectrochemical and photocatalytic performances. The S-2 electrode prepared with urea concentration of 2 mol/L displayed the high visible light photocurrent of 73.76 μA/cm² and photovoltage of −0.30 V. Furthermore, the S-2 photocatalyst also showed excellent photocatalytic decoloration ability of MO, RhB and MB dyes, and the corresponding decomposition efficiencies were 55.82%, 41.62% and 89.90% under solar irradiation. Except for the organic dyes, Cr(VI) ions also could be reduced into Cr(III), and the photocatalytic efficiency achieved 74.05% after 3 h solar irradiation. The active group and photocatalytic mechanism were proposed to illuminate the essential reason. The experimental results indicated that the novel BiVO₄/TiO₂ NTAs with binary heterojunction are attractive photocatalysts for the dyeing and printing water treatment.     

Synthesis of dynamic g-C3N4/Fe@ZnO nanocomposites for environmental remediation applications

An effective g-C₃N₄/Fe@ZnO heterostructured photocatalyst was synthesized by a simple chemical co-precipitation method and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy and ultraviolet–visible spectroscopy. Transmission electron microscopy revealed that 7-8 nm-sized 1%Fe@ZnO nanoparticles were evenly distributed on g-C₃N₄ nanosheets to form a hybrid composite. The photocatalytic effectiveness of the composites was assessed against methylene blue dye, and it was found that the 50%g-C₃N₄/Fe@ZnO photocatalyst was more efficient in harvesting solar energy to degrade dye than the ZnO, 1%Fe@ZnO, g-C₃N₄, g-C₃N₄/ZnO and (10, 25, 40, 60 & 75 wt%) g-C₃N₄/Fe@ZnO samples. The antibacterial competency of the samples was also explored against Gram-positive (Bacillus subtilis, Staphylococcus aureus and Streptococcus salivarius) and Gram-negative (Escherichia coli) bacteria through the well diffusion method. The 50%g-C₃N₄/Fe@ZnO nanocomposite exhibited a superior antibacterial action compared to that of the rest of the samples. The exceptionally improved photocatalytic and antimicrobial efficiency of the 50%g-C₃N₄/Fe@ZnO composite was primarily accredited to the synergic outcome of the interface established between Fe@ZnO nanoparticles and g-C₃N₄ nanosheets.     

Synthesis plasmonic Bi/BiVO4 photocatalysts with enhanced photocatalytic activity for degradation of tetracycline (TC)

In recent years, the excessive use of antibiotics has become a serious problem for human health. BiVO₄ regarded as one of the most promising visible-light-driven photocatalysts was used to degrade the antibiotics. In this paper, we fabricated Bi/BiVO₄ plasmonic photocatalysts which enhanced the photocatalytic activity of BiVO₄ for degradation of tetracycline (TC) antibiotic. The Bi/BiVO₄ photocatalysts were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy and high-resolution transmission electron microscopy. In addition, the photocatalytic experiment results show that the 0.04-Bi/BiVO₄ sample has the best photocatalytic activity for 2 times than the pure BiVO₄ photocatalyst. The cycle experiments, after four repetitions of the experiments, showed the sample still maintained a high photocatalytic activity. Finally, the photocatalytic reaction mechanism was also studied by free radical capture experiments and electron paramagnetic resonance spectroscopy.