Chemical and biological evaluation of a reaction mixture of R-(+)-limonene/ozone: Formation of strong airway irritants

The airway irritation of a reaction mixture of R-(+)-limonene and ozone was evaluated by a mouse bioassay in which sensory irritation, bronchoconstriction and pulmonary irritation were measured. Significant sensory irritation (33% reduction of mean respiratory rate) was observed by dynamic exposure of the mice, during 30 min, to a ca. 16 s old reaction mixture of ozone and limonene. The initial concentrations were nominally 4 ppm O₃ and 48 ppm limonene. After reaction, the residual O₃ was <0.03 ppm. Conventional analytical chemical methods were used to measure the formation of readily identified and stable products. Besides the expected products, 1-methyl-4-acetylcyclohexene (AMCH), 3-isopropenyl-6-oxoheptanal (IPOH), formaldehyde and formic acid, autooxidation products of limonene and a series of compounds (i.e., acetone, acrolein and acetic acid), which may or may not be artefacts, were identified. Addition of the sensory irritation effects of the residual reactants and all the identified compounds could not explain the observed sensory irritation effect. This suggests that one or more strong airway irritants were formed. Since limonene is common in the indoor air, and ozone is infiltrated from outdoors and/or produced indoors (e.g., by photocopiers), such oxidation reactions may be relevant for indoor air quality.     

An evaluation of a river health using the index of biological integrity along with relations to chemical and habitat conditions

We evaluated the health condition of a temperate river during June-November 1999 through applications of the index of biological integrity (IBI) using fish assemblages and qualitative habitat evaluation index (QHEI) as well as chemical analyses. Overall IBI values ranged from 13 to 37 and averaged 23 (n = 25, standard error = 1.16), indicating a "poor" or "very poor" condition according to the criteria of modified Karr [Fisheries 6 (1981) 21]. The values of mean IBI declined at a rate of 0.22 km(-1) (R2 = 0.91, p < 0.05) along the longitudinal distance from the headwaters to the downstream sites. Reduced IBI values at downstream sites reflected low forest cover, high population density and high nutrient enrichments. Ecotoxicity tests using the river water also showed that toxic impacts were evident in the downriver sites. These factors resulted in decreases of riffle benthic species and insectivores and increases of tolerant species, anormalies and exotic species in the river. Spatial pattern in IBI agreed with QHEI values, which showed a linear relation (R2 = 0.998, p < 0.001) with species richness. Field measurements of conductivity and pH, an indicators for variation of conservative ions, showed that the river water was diluted by 40% fold by summer monsoon rain and surface run-off from the watershed, resulting in a physical and chemical instability during the monsoon. For these reasons, average IBI values during the monsoon and postmonsoon decreased >20% compared to the premonsoon, indicating that IBI values were also affected by flow regime. Based on the overall physico-chemical data and IBI values, the river health is rapidly degrading due to the combined effect of chemical contaminations and habitat modifications.     

14C and 210Pb in NE atlantic sediments: Evidence of biological reworking in the context of radioactive waste disposal

Scavenging by the seabed and by sedimentary particles in the deep ocean may have a significant effect on the removal of artificial radionuclides released to the water column as a result of radioactive waste disposal operations. Biological activity in the upper layers of the sediment column will enhance the rate of removal for those particle-reactive radionuclides with a short half-life relative to the turnover time of the upper mixed layer. For longer-lived radionuclides the rate of sediment accumulation will determine the ultimate rate of removal.The rate of sediment accumulation and extent of biological mixing of deep-sea sediment from three areas of the NE Atlantic Ocean have been investigated using ¹⁴C and ²¹⁰Pb data. Treatment of the radiocarbon with a simple box model provided estimates of sedimentation rate (ω), mixed layer depth (L), mixed layer age (T_ML) and the age of material arriving at the surface (T₀), which were broadly similar to previously published values from other ocean basins. Box cores from the Iberia Abyssal Plain, Madeira Abyssal Plain and from the NEA low-level radioactive waste dumpsite yielded sedimentation rates in the range 0.8 to 2.2 cm ky^?1 over the upper 16–25 cm. Continuous particle mixing appears to be taking place to a depth of 4 to 6 cm below the present sediment-water interface. Closely spaced vertical sampling of core 161-2 for ²¹⁰Pb allowed a biodiffusion coefficient (D_B) to be calculated (4 × 10^?9cm²s^?1), treating bioturbations as a diffusive term and sedimentations as an advective term in a simple mathematical model. In general, values of D_B in deep ocean sediments fall within the range 1–10 × 10^?9cm²s^?1, two orders of magnitude lower than nearshore values. From a review of published data it is concluded that biological mixing takes place extensively in the deep ocean; it appears to be fairly constant on a basin-wide scale and amenable to incorporation in mathematical models of radionuclide behaviour in the water column.     

Comprehensive emergy evaluation and optimization of corn straw power generation system: a case study

Biomass energy has become an important measure to alleviate ecological environment security and energy supply security in China. Emergy accounting method is used to analyze and evaluate economy, environment, and sustainability of corn straw generation system, which includes corn planting subsystem, collection and transportation subsystem, and corn straw power generation subsystem. The key substances that need to be optimized in the system are identified by using sensitivity analysis. Based on the position of key substances in the system, emergy accounting optimization methodology is conducted. Corresponding optimization design scheme is proposed based on the “3R” (reduce, reuse, and recycle) principle of circular economy. Current study shows that emergy yield ratio, emergy investment ratio, environmental loading ratio, and emergy sustainability index of the corn straw power generation system are 3.69, 2.68, 1.61, and 2.29, respectively, which are better than wind power generation system and thermal power generation system. In addition, it is proposed that the fertilizer alternative plan and the transportation redesign plan can replace 50,000 tons potash and reduce equipment resources by 20% and energy resources input by 30%. Economy and sustainable development of the system is significantly improved. The optimization design method based on the “3R“ principle proposed in this paper can provide a useful reference for the research in the field of resource recycling.     

Long-term flux of Chernobyl-derived 137Cs from soil to French rivers: a study on sediment and biological indicators

Sediment and aquatic plants were collected annually since the early 1990s in the main French rivers, upstream of nuclear power plants. These time series were used in order to assess the parameters of a compartmental model describing the Chernobyl-derived (137)Cs flux from soil to rivers. In order to reduce the dispersal of (137)Cs measured activities in sediment samples due to the granulometric heterogeneity, a correction method was set up using sediment test-fractions artificially enriched with specific diameter particles. The method was based on (137)Cs affinity for fine particles, especially clays, and thus clay and fine silt contents of each sample was analysed. Corrected sediment data showed (1) that the method efficiently reduced the variability; and (2) that (137)Cs activities in French rivers decreased with a half-life of 4 to 6 years since 1987 (after correction by radioactive decay). A similar half-life value was obtained for aquatic plants pointing out that this half-life is related to the gradual decay of the flux from soil to rivers, not to the indicator itself. Comparing our results with similar ones published by other authors, it appeared possible that this kinetic varies with the time period over which the study is conducted, the longer the period the lower is the kinetic.     

The use of ambient air quality modeling to estimate individual and population exposure for human health research: a case study of ozone in the Northern Georgia Region of the United States

Ambient monitors are commonly used to estimate exposure for epidemiological studies, and air quality modeling is infrequently applied. However air quality modeling systems have the potential to alleviate some, although not all, of the limitations of monitoring networks. To investigate this application, exposure estimates were generated for a case study high ozone episode in the Northern Georgia Region of the United States based on measurements and concentration estimates from an air quality modeling system. Hourly estimates for 2268 4-km by 4-km gridcells were generated in a domain that includes only eight ozone monitors. Individual and population-based ozone exposures were estimated using multiple approaches, including area-weighted average of modeled estimates, nearest monitor, and spatial interpolation by inverse distance weighting and kriging. Results based on concentration fields from the air quality modeling system revealed spatial heterogeneity that was obscured by approaches based on the monitoring network. With some techniques, such as spatial interpolation, monitoring data alone was insufficient to estimate exposure for certain areas, especially for rural populations. For locations far from ozone monitors, the estimates from the nearest monitor approach tended to overestimate exposure, compared to modeled estimates. Counties in which one or more monitors were present had statistically higher population density and modeled ozone estimates than did counties without monitors (p-value <0.05). This work demonstrates the use of air quality modeling to generate higher spatial and temporal resolution exposure estimates, and compares the advantages of this approach to traditional methods that use monitoring data alone. The air quality modeling method faces its own limitations, such as the need to thoroughly evaluate concentration estimates and the use of ambient levels rather than personal exposure.     

Levels of PCDD/PCDFs and PCBs in edible marine species and human intake: a literature review

Polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs) are lipophilic organic compounds whose origin comes from many different sources. PCDD/Fs and PCBs are ubiquitous and persistent environmental pollutants with a well known potential toxicity, which were included at the 1998 UN-EC POP protocol. Although human exposure to PCDD/Fs and PCBs can occur by various routes, food is the primary source. A number of studies have shown that the major food sources of these organic pollutants are fat-containing animal products, including fish and other seafood. Because of the frequent health recommendations concerning fish consumption, to determine the contribution to the dietary intake of chemical contaminants such as PCDD/Fs and PCBs through fish and other seafood consumption is an issue of special interest. This paper reviews the state of the science regarding recent literature on PCDD/F and PCB levels in marine species and human intake through fish and seafood consumption. The concentrations of these pollutants depend basically on the environment in which the respective species are caught. It is concluded that some groups of population frequently consuming high quantities of certain species could be significantly increasing health risks due to PCDD/F and PCB exposure.     

Porewater as a matrix in toxicity bioassays with sea urchins and bivalves: evaluation of applicability to the Venice lagoon (Italy)

Porewater plays an important role in sediment toxicity assessment using bioassays, but the most reliable extracting method and the potential contribution of confounding factors to the real toxicity need to be studied. The applicability of bioassays with the early life stages of Paracentrotus lividus, Mytilus galloprovincialis and Crassostrea gigas on porewaters extracted by centrifugation from the Venice Lagoon (Italy) is evaluated and demonstrated: toxicity tests can discriminate the toxicity of porewaters from sites with different kinds and levels of pollution and, using toxicity scores, data are classified in five toxicity classes. Sulphides do not represent a confounding factor in porewater toxicity; in contrast ammonia exhibited some concentrations above the toxicity threshold for sea urchin embryos.     

Human exposure to PCDD/Fs in the UK: the development of a modelling approach to give historical and future perspectives

In order to assess the long-term impact of persistent organic contaminants such as polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) it is important to be able to quantify historical exposure. An understanding of past exposure is not only important to place our current body burdens in perspective, but is useful in assessing our potential future exposure. Unfortunately, very few direct measurements of our main source of exposure (i.e., food) over the past decades are available. This study attempts to reconstruct the historical exposure of the UK population to PCDD/Fs using a combination of emission estimates, information on environmental temporal trends derived from sediment cores and archived materials, and environmental/human fate modelling. Predicted adipose and blood lipid concentrations for a typical cross section of the population are derived over time (1920-2000), which is compared with measured data. The approach has been tested with two PCDDs and two PCDFs and showed encouraging agreement with measured data. Certain parts of the modelling methodology have been highlighted where there is still poor understanding of the processes governing fate and behaviour. These areas are discussed and recommendations for future improvements are made. The paper thus represents an initial modelling approach which defines both the historical (1920-present) and future (present-2020) fate of PCDD/Fs in the UK population.     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

基于LCA的废旧资源循环利用节能减排效果评估模式与方法研究——以吉林省某钢铁企业为例

促进废旧资源循环利用是加快推进我国生态文明建设,完成节能减排目标的必然选择。本文基于生命周期评价模式,从微观企业层面入手,构建产品全生命周期基准流程,引入能量输入与环境输出参数,建立废旧资源循环利用节能减排效果量化核算模型,评估再生产品的节能减排经济成效,并以吉林省某钢铁企业为例,评估"废钢-电炉"短流程和"铁矿石-高炉-转炉"长流程的能源、环境、成本差异,辨识影响废钢再循环节能减排效果的主要因素和重要环节。结果显示,再生钢铁全生命周期与原生钢铁全生命周期相比,节能588.48kgce/t,节能率为84%;主要污染物中SO2减排率最高,达92%;CO2总减排1 180.92 kg/t,减排率为67%;总成本却高出198元/t。其中,炼铁工序的节能量和减碳量最大,烧结工序SO2、NOx和烟(粉)尘减排量最大,焦化工序COD和氨氮减排量最大,回收、加工处理、炼钢环节节能量和减碳量以及SO2、NOx和烟(粉)尘减排量均为负。成本方面,再生钢铁生产成本高于原生钢铁308元/t,虽然再生钢铁由于污染减排可节省56元/t的排污费并获取54元/t的碳交易收益,但都不足以扭转电炉炼钢费用较高的现状。因此,国家应在电炉炼钢方面给予钢企及相关企业适当的财税扶持政策,在电价方面给予钢企一定的优惠或补贴,并完善废钢回收加工体系等,以促进废钢循环利用。基于LCA的废旧资源循环利用节能减排效果评估可以实现对产品生命周期全过程的资源、环境、成本的优化管理。     

Exposure to heavy metals and PCDD/Fs by the population living in the vicinity of a hazardous waste landfill in Catalonia, Spain: Health risk assessment

Most fly ashes produced in municipal waste incinerators of Catalonia (Spain) are deposited in a hazardous waste landfill (HWL) placed in Castellolí (Barcelona). This facility means a concern for the population living nearby. In response to this, we performed a probabilistic study focused on assessing human health risks derived from environmental exposure to heavy metals and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) around the HWL. Concentrations of various metals and PCDD/Fs were determined in soil and air samples collected at the HWL, and in 4 locations around it. Health risks were evaluated according to the distance from the sampling locations to the HWL (near and far-sites). In general terms, metal and PCCD/F levels were relatively low in air and soil samples. However, concentrations of PCDD/Fs, as well as those of some metals, were found to be relatively higher in the HWL and Castellolí (the nearest village) samples than in those collected far away, resulting in a slight increase of exposure to those pollutants. Anyhow, the current concentrations of metals and PCDD/Fs suggest that it is highly unlikely that there are any additional non-carcinogenic and carcinogenic risks for the population living near the HWL.