Low temperature sintering and dielectric properties of Ba<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript> microwave ceramics using Co<Subscript>2</Subscript>O<Subscript>3</Subscript> additives

The Ba₃(VO₄)₂–x wt% Co₂O₃ (x?=?0.5–5) ceramics were prepared by the solid state reaction method in order to reduce the sintering temperature. The effects of the Co₂O₃ additions on the phase composition, microstructures, sintering characteristics and microwave dielectric properties of Ba₃(VO₄)₂ ceramics are investigated by an X-ray diffractometer, a scanning electron microscope and a network analyzer. As a result, the Q?×?f value of 54,000 GH, the ε _r of 14.6 and the τ_f value of +58.5 ppm/°C were obtained in the sample of the Ba₃(VO₄)₂–3 wt% Co₂O₃ ceramic sintered at the temperature of 925 °C, which is capable to co-fire with electrode metal of high conductivity such as Ag (961 °C). Moreover, the Q?×?f values of the sample with Co₂O₃ higher than that of 3 wt% additions decreased because of the formation of Ba₂V₂O₇ phase.     

Enhancing the microwave dielectric properties of Sr<Subscript>2</Subscript>Ca<Subscript>3</Subscript>Ta<Subscript>4</Subscript>TiO<Subscript>17</Subscript> ceramics by Zr Substitution

The compositions in Sr₂Ca₃Ta₄Ti_1?xZr_xO₁₇ (0?≤?x?≤?0.12) series were designed and fabricated by solid state sintering method. All the compositions formed single phases and crystallized in an orthorhombic crystal structure. Zr substitution led to the enhancing of the microwave dielectric properties by tuning the τ_f value through zero and increased the Q_uf_o value from 12,540 to 14,970 GHz with a slight decrease in ε_r. In the present study, a good combination of ε_r ~?51, Q_uf_o ~?145,43 GHz and τ_f ~ 3 ppm/°C were obtained for Sr₂Ca₃Ta₄Ti_0.90Zr_0.1O₁₇ ceramic sintered at 1575 °C for 4 h.     

Effect of sintering temperature on microstructures and microwave dielectric properties of Ba<Subscript>2</Subscript>MgWO<Subscript>6</Subscript> ceramics

The microwave dielectric properties of Ba₂MgWO₆ ceramics were investigated with a view to the use of such ceramics in mobile communication. Ba₂MgWO₆ ceramics were prepared using the conventional solid-state method with various sintering temperatures. Dielectric constants (? _r ) of 16.8–18.2 and unloaded quality factor (Q _u  × f) of 7000–118,200 GHz were obtained at sintering temperatures in the range 1450–1650 °C for 2 h. A maximum apparent density of 6.76 g/cm³ was obtained for Ba₂MgWO₆ ceramic, sintered at 1650 °C for 2 h. A dielectric constant (? _r ) of 18.4, an unloaded quality factor (Q _u  × f) of 118,200 GHz, and a temperature coefficient of resonant frequency (τ _f ) of ?34 ppm/°C were obtained when Ba₂MgWO₆ ceramics were sintered at 1650 °C for 2 h.     

Low temperature sintering and microwave dielectric properties of Zn<Subscript>3</Subscript>Mo<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramic

Crystal structure and dielectric properties of Zn₃Mo₂O₉ ceramics prepared through a conventional solid-state reaction method were characterized. XRD and Raman analysis revealed that the Zn₃Mo₂O₉ crystallized in a monoclinic crystal structure and reminded stable up to1020 °C. Dense ceramics with high relative density (~ 92.3%) were obtained when sintered at 1000 °C and possessed good microwave dielectric properties with a relative permittivity (ε _r ) of 8.7, a quality factor (Q?×?f) of 23,400 GHz, and a negative temperature coefficient of resonance frequency (τ _f ) of around ??79 ppm/°C. With 5 wt% B₂O₃ addition, the sintering temperature of Zn₃Mo₂O₉ ceramic was successfully lowered to 900 °C and microwave dielectric properties with ε _r ?=?11.8, Q?×?f?=?20,000 GHz, and τ _f = ??79.5 ppm/°C were achieved.     

Effects of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> additive on sintering behavior and microwave dielectric properties of ZnTa<Subscript>2</Subscript>O<Subscript>6</Subscript> ceramics

ZnTa₂O₆ ceramics with various amount of Al₂O₃ additive were synthesized by a conventional mixed-oxide route. The grain growth of ZnTa₂O₆ ceramics was accelerated with Al₂O₃ additive. However, excessive addition (>1.0 wt%) of Al₂O₃ leaded to abnormal grain growth. With Al₂O₃ addition, the Al₂O₃ additive did not solubilized into ZnTa₂O₆ structure but resulted in forming the second phase. The Al₂O₃ addition resulted in the lower sintering temperature of ZnTa₂O₆ ceramics and improved microwave dielectric properties. The dielectric constant (ε_r) of the samples did not change much and ranged from 32.41 to 34.33 with different amount of Al₂O₃ addition. The optimized quality factor (Q × f) was higher than 70,000 GHz as a result of the denser ceramics. The temperature coefficient of resonant frequency (τ _f ) of the doped ZnTa₂O₆ ceramics could be optimized to near-zero.     

Low temperature sintering and microwave dielectric properties of Li<Subscript>6</Subscript>Mg<Subscript>7</Subscript>Ti<Subscript>3</Subscript>O<Subscript>16</Subscript> ceramics with LiF additive for LTCC applications

Li₆Mg₇Ti₃O₁₆ ceramics were prepared by the conventional solid-state method with 1–5 wt% LiF as the sintering aid. Effects of LiF additions on the phase compositions, sintering characteristics, micro-structures and microwave dielectric properties of Li₆Mg₇Ti₃O₁₆ ceramics were investigated. The LiF addition could effectively lower the sintering temperature of Li₆Mg₇Ti₃O₁₆ ceramics from 1550 to 900 °C. For different LiF-doped compositions, the optimum dielectric permittivity (ε _r ) and quality factor (Q·f) values first increased and then decreased with the increase of LiF contents, whereas the temperature coefficient of resonant frequency (τ _f ) fluctuated between ??14.39 and ??8.21 ppm/°C. Typically, Li₆Mg₇Ti₃O₁₆ ceramics with 4 wt% LiF sintered at 900 °C exhibited excellent microwave dielectric properties of ε _r ?=?16.17, Q·f?=?80,921 GHz and τ _f ?=???8.21 ppm/°C, which are promising materials for the low temperature co-fired ceramics applications.     

Critical Behavior of La<Subscript>0.67</Subscript>Ba<Subscript>0.33</Subscript>Mn<Subscript>0.95</Subscript>Fe<Subscript>0.05</Subscript>O<Subscript>3</Subscript> Manganite

The critical behavior of perovskite manganite La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ at the ferromagnetic–paramagnetic has been analyzed. The results show that the sample exhibited the second-order magnetic phase transition. The estimated critical exponents derived from the magnetic data using various such as modified d’Arrott plot Kouvel–Fisher method and critical magnetization M(T _C, H). The critical exponents values for the La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ are close to those expected from the mean field model β = 0.504 ± 0.01 with T _C = 275661 ± 0.447 (from the temperature dependence of the spontaneous magnetization below T _C ), γ = 1.013 ± 0.017 with T _C = 276132 ± 0.452 (from the temperature dependence of the inverse initial susceptibility above T _C ), and δ = 3.0403 ± 0.0003. Moreover, the critical exponents also obey the single scaling equation of M(H, ε) = |ε| ^β f _±(H/|ε| ^β+γ ).     

Crystal structure,microstructure and microwave dielectric properties of novel MgAl<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript> ceramic

In the present work, a novel MgAl₂Ti₃O₁₀ ceramic was obtained using a traditional solid-state reaction method. X-ray diffraction and energy dispersive spectrometer showed that the main MgAl₂Ti₃O₁₀ phase was formed after sintered at 1300–1450 °C. With rising the sintering temperature from 1300 to 1450 °C, the bulk density (ρ), relative permittivity (ε _r ) and Q?×?f value firstly increased, reached the maximum values (3.61 g/cm³, 14.9, and 26,450 GHz) and then decreased. The temperature coefficient of resonator frequency (τ _f ) showed a slight change at a negative range of ??94.6 to ??83.7 ppm/°C. When the sintering temperature was 1400 °C, MgAl₂Ti₃O₁₀ ceramics exhibited the best microwave dielectric properties with Q?×?f?=?26,450 GHz, ε _r ?=?14.9 and τ _f ?=???83.7 ppm/°C.     

Effect of Ni<Superscript>2+</Superscript> substitution on crystal structure and microwave dielectric properties for MgZrNb<Subscript>2</Subscript>O<Subscript>8</Subscript> ceramics

Monoclinic structured Mg_1?xNi_xZrNb₂O₈ (0?≤?x?≤?0.12) ceramics were synthesized for the first time through traditional solid-state reaction process and pure phase were obtained in all range. Rietveld refinement was used to analyze the crystal structure. With the increase of Ni²⁺ substitution amount, ε _r decreased, Q?×?f rose first then fell, τ _f shifted for the positive direction. Bond ionicity, lattice energy and bond energy were separately calculated to investigate the correlations with microwave dielectric properties. Typically, ceramics samples with the composition of Mg_0.92Ni_0.08ZrNb₂O₈ sintered at 1280 °C for 4 h exhibited the optimum microwave dielectric properties: ε _r ?=?24.58, Q?×?f?=?74534.1 GHz, τ _f ?=???49.11 ppm/°C, which could be a promising material for application.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on the microstructure and electrical properties of LaMnO<Subscript>3</Subscript>-based NTC thermistors

A study to develop a new system of negative temperature coefficient thermistors for wide temperature range, A series of Mn-based perovskite-structured ceramics of composition (LaMn_1?x Al _x O₃)_0.9(Al₂O₃)_0.1 has been synthesized by conventional solid state reaction at 1350?°C. The X-ray diffraction patterns showed that for all the samples, the substitution of manganese by aluminum up to x?=?0.1 preserved the rhombohedral perovskite LaMnO₃-like phase. For x?=?0.2, apart from the LaMnO₃-like structure, a second perovskite phase based on the cubic LaAlO₃ structure was formed. For x?=?0.3 and 0.4, the phase present was LaAlO₃ -type structure. The grain sizes of the sintered body detected by scanning electron microscope were decreased with increasing Al₂O₃ content. The resistivity increases with increasing the Al content. The obtained values of ρ _25?°C and B _25/50 and E _a are in the range of 10–13103 Ω cm, 1813–2794 K, 0.156–0.241 eV, respectively. The resistance variation (ΔR/R) was <0.241% and the minimum value (0.0483%) was obtained for aging at 125?°C at 500 h. The aim of this work was explored new composite ceramics materials, which could be used as potential candidates for wide temperature range from ?100 to 500?°C thermistors applications.     

Structure and electrical properties of MnO doped (Ba<Subscript>0.96</Subscript>Ca<Subscript>0.04</Subscript>)(Ti<Subscript>0.92</Subscript>Sn<Subscript>0.08</Subscript>)O<Subscript>3</Subscript> lead free ceramics

In this work, (Ba_0.96Ca_0.04)(Ti_0.92Sn_0.08)O₃–xmol MnO (BCTS–xMn) lead-free piezoelectric ceramics were fabricated by the conventional solid-state technique. The composition dependence (0 ≤ x ≤ 3.0 %) of the microstructure, phase structure, and electrical properties was systematically investigated. An O–T phase structure was obtained in all ceramics, and the sintering behavior of the BCTS ceramics was gradually improved by doping MnO content. In addition, the relationship between poling temperature and piezoelectric activity was discussed. The ceramics with x = 1.5 % sintering at temperature of 1330 °C demonstrated an optimum electrical behavior: d ₃₃ ~ 475 pC/N, k _p ~ 50 %, ε _r ~ 4060, tanδ ~ 0.4 %, P _r ~ 10.3 μC/cm², E _c ~ 1.35 kV/mm, T _C ~ 82 °C, strain ~0.114 % and \(d_{33}^{*}\) ~ 525 pm/V. As a result, we achieved a preferable electric performance in BaTiO₃-based ceramics with lower sintering temperature, suggesting that the BCTS–xMn material system is a promising candidate for lead-free piezoelectric ceramics.     

Scaling behavior of dynamic hysteresis in Bi<Subscript>3.15</Subscript>Nd<Subscript>0.85</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ceramics

The scaling behavior of dynamic hysteresis was investigated in Bi_3.15Nd_0.85Ti₃O₁₂ bulk ceramics at a frequency of 1–1000 Hz and an external electric field amplitude of 79–221 kV/cm. The scaling behavior at low amplitude (E ₀ ≤ 114 kV/cm) takes the form of \(\langle A \rangle \propto f^{ - 0.013} E_{0}^{0.7}\) for low frequency (f ≤ 200 Hz) and \(\langle A \rangle \propto f^{ - 0.013} E_{0}^{0.22}\) for high frequency (f > 200 Hz), where \(\langle A \rangle\) is the area of hysteresis loop and f and E ₀ are frequency and amplitude of external electric field, respectively. At high amplitude (E ₀ > 114 kV/cm), we obtain \(\langle A \rangle \propto f^{0.011} E_{0}^{1.163}\) at low frequency and \(\langle A \rangle \propto f^{ - 0.015} E_{0}^{0.7}\) at high frequency. At low E ₀, the contribution to the scaling relation mainly results from reversible domain switching, while at high E ₀ reversible and irreversible domain switching concurrently contribute to the scaling relation.     

Magnetic,magnetocaloric properties,and critical behavior in a layered perovskite La<Subscript>1.4</Subscript>(Sr<Subscript>0.95</Subscript>Ca<Subscript>0.05</Subscript>)<Subscript>1.6</Subscript>Mn<Subscript>2</Subscript>O<Subscript>7</Subscript>

We report the results of magnetic, magnetocaloric properties, and critical behavior investigation of the double-layered perovskite manganite La_1.4(Sr_0.95Ca_0.05)_1.6Mn₂O₇. The compounds exhibits a paramagnetic (PM) to ferromagnetic (FM) transition at the Curie temperature T _C = 248 K, a Neel transition at T _N = 180 K, and a spin glass behavior below 150 K. To probe the magnetic interactions responsible for the magnetic transitions, we performed a critical exponent analysis in the vicinity of the FM–PM transition range. Magnetic entropy change (??S _M) was estimated from isothermal magnetization data. The critical exponents β and γ, determined by analyzing the Arrott plots, are found to be T _C = 248 K, β = 0.594, γ = 1.048, and δ = 2.764. These values for the critical exponents are close to the mean-field values. In order to estimate the spontaneous magnetization M _S(T) at a given temperature, we use a process based on the analysis, in the mean-field theory, of the magnetic entropy change (??S _M) versus the magnetization data. An excellent agreement is found between the spontaneous magnetization determined from the entropy change [(??S _M) vs. M ²] and the classical extrapolation from the Arrott curves (µ₀H/M vs. M ²), thus confirming that the magnetic entropy is a valid approach to estimate the spontaneous magnetization in this system and in other compounds as well.     

Enhanced magnetoelectric coupling in La-modified Bi<Subscript>5</Subscript>Co<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>Ti<Subscript>3</Subscript>O<Subscript>15</Subscript> multiferroic ceramics

Multiferroic properties of La-modified four-layered perovskite Bi_5?x La _x Fe_0.5Co_0.5Ti₃O₁₅ (0 ≤ x ≤ 1) ceramics were investigated, by analyzing the magnetodielectric effect, magneto-polarization response and magnetoelectric conversion. X-ray diffraction indicated the formation of pure Aurivillius ceramics, and Raman spectroscopy revealed the Bi ions displacement and the crystal structure variation. The enhancement of ferromagnetic and ferroelectric properties was observed in Bi_5?x La _x Fe_0.5Co_0.5Ti₃O₁₅ after La modification. The evidence for enhanced ME coupling was determined by magnetic field-induced marked variations in the dielectric constant and polarization. A maximum ME coefficient of 1.15 mV/cm·Oe was achieved in Bi_4.25La_0.75Fe_0.5Co_0.5Ti₃O₁₅ ceramic, which provides the possible promise for novel magnetoelectric device application.     

A novel Y<Subscript>3</Subscript>ZnAl<Subscript>3</Subscript>SiO<Subscript>12</Subscript> microwave dielectric ceramic for microwave communication application as substrates

Novel microwave dielectric ceramic Y₃ZnAl₃SiO₁₂ were synthesized by solid-state route. The crystal structure of synthesized samples was characterized by X-ray diffraction and refined with Rietveld method. Microstructure and microwave dielectric properties of Y₃ZnAl₃SiO₁₂ ceramics were investigated using Scanning Electron Microscopy and Hakki–Coleman method. X-ray data display that major phase of Y₃ZnAl₃SiO₁₂ is isostructural to Y₃Al₅O₁₂ with a cubic garnet structure and space group of Ia-3d, which is composed of (Al/Si)O₄ tetrahedron, (Zn/Al)O₆ octahedron and YO₈ dodecahedron, besides minor Y₂SiO₅ secondary phase. The distribution of grain sizes is closer to Gauss distribution. Bulk density of samples has a similar variation curve with Q*f of samples. Y₃ZnAl₃SiO₁₂ ceramics exhibit excellent microwave dielectric properties: ε_r?=?10.2, Q*f?=?37938.2 (@9.47 GHz), τ _f ?=??31.7 ppm/°C at sintering temperature of 1500 °C. Our results indicate Y₃ZnAl₃SiO₁₂ could be a potential material for millimeter wave communication systems as microwave substrates.     

Magnetization reversal and tunable exchange bias behavior in Mn-substituted NiCr<Subscript>2</Subscript>O<Subscript>4</Subscript>

Single phase samples of Ni(Cr_1?xMn _x )₂O₄ (x = 0–0.50) were synthesized by using sol–gel route. Investigation of structural, magnetic, exchange bias and magnetization reversal properties was carried out in the bulk samples of Ni(Cr_1?xMn _x )₂O₄. Rietveld refinement of the X-ray diffraction patterns recorded at room temperature reveals the tetragonal structure for x = 0 sample with I4₁/amd space group and cubic structure for x ≥ 0.05 samples with \( {\text{Fd}\bar{3}\text{m}} \) space group. Magnetization measurements show that all samples exhibit ferrimagnetic behavior, and the transition temperature (T_C) is found to increase from 73 K for x = 0 to 138 K for x = 0.50. Mn substitution induces magnetization reversal behavior especially for 30 at% of Mn in NiCr₂O₄ system with a magnetic compensation temperature of 45 K. This magnetization reversal is explained in terms of different site occupation of Mn ions and the different temperature dependence of the magnetic moments of different sublattices. Study of exchange bias behavior in x = 0.10 and 0.30 samples reveals that they exhibit negative and tunable positive and negative exchange bias behavior, respectively. The magnitudes of maximum exchange bias field of these samples are found to be 640 and 5306 Oe, respectively. Exchange bias in x = 0.10 sample originates from the anisotropic exchange interaction between the ferrimagnetic and the antiferromagnetic components of magnetic moment. The tunable exchange bias behavior in x = 0.30 sample is explained in terms of change in domination of one sublattice moment over the other as the temperature is varied.     

Solid-state reactions in the system Li<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>

The formation mechanisms of Li _x Na_{1 ?x} Ta _y Nb_{1 ? y} O₃ perovskite solid solutions in the Li₂CO₃-Na₂CO₃-Nb₂O₅-Ta₂O₅ system have been studied by x-ray diffraction, differential thermal analysis, thermogravimetry, IR spectroscopy, and mass spectrometry at temperatures from 300 to 1100°C. The results indicate that the synthesis of Li _x Na_{1 ? x} Ta _y Nb_{1 ? y} O₃ solid solutions involves a complex sequence of consecutive and parallel solid-state reactions. An optimized synthesis procedure for Li _x Na_{1 ? x} Ta _y Nb_{1 ? y} O₃ solid solutions is proposed.     

Influence of Nd doping on microwave dielectric properties of SrTiO<Subscript>3</Subscript> ceramics

Sr_1?x Nd _x TiO₃ (x?=?0.08–0.14) ceramics were prepared by conventional solid-state methods. The analysis of crystal structure suggested Sr_1?x Nd _x TiO₃ ceramics appeared to form tetragonal perovskite structure. The relationship between charge compensation mechanism, microstructure feature and microwave dielectric properties were investigated. Trivalent Nd³⁺ substituting Sr²⁺ could effectively decrease oxygen vacancies. This reduction and relative density were critical to improve Q?×?f values of Sr_1?x Nd _x TiO₃ ceramics. For ε _r values, incorporation of Nd could restrain the rattling of Ti⁴⁺ cations and led to the reduction of dielectric constant. The τ _f values were strongly influenced by tilting of oxygen octahedral. The τ _f values decreased from 883 to 650 ppm/°C with x increasing from 0.08 to 0.14. A better microwave dielectric property was achieved for composition Sr_0.92Nd_0.08TiO₃ at 1460 °C: ε _r ?=?160, Q?×?f?=?6602 GHz, τ _f ?=?883 ppm/°C.     

Ab Initio Study of the Electronic Structure,Elastic Properties,Magnetic Feature and Thermodynamic Properties of the Ba<Subscript>2</Subscript>NiMoO<Subscript>6</Subscript> Material

We report first-principles calculations of the elastic properties, electronic structure and magnetic behavior performed over the Ba₂NiMoO₆ double perovskite. Calculations are carried out through the full-potential linear augmented plane-wave method within the framework of the Density Functional Theory (DFT) with exchange and correlation effects in the Generalized Gradient and Local Density Approximations, including spin polarization. The elastic properties calculated are bulk modulus (B), the elastic constants (C₁₁, C₁₂ and C₄₄), the Zener anisotropy factor (A), the isotropic shear modulus (G), the Young modulus (Y) and the Poisson ratio (υ). Structural parameters, total energies and cohesive properties of the perovskite are studied by means of minimization of internal parameters with the Murnaghan equation, where the structural parameters are in good agreement with experimental data. Furthermore, we have explored different antiferromagnetic configurations in order to describe the magnetic ground state of this compound. The pressure and temperature dependence of specific heat, thermal expansion coefficient, Debye temperature and Grüneisen parameter were calculated by DFT from the state equation using the quasi-harmonic model of Debye. A specific heat behavior C_V?≈?C_P was found at temperatures below T = 400 K, with Dulong–Petit limit values, which is higher than those, reported for simple perovskites.     

DFT study of the stability of oxygen vacancy in cubic <Emphasis Type="Italic">AB</Emphasis>O<Subscript>3</Subscript> perovskites

Rare earth and alkaline earth metal perovskites with general formula ABO₃ have attracted much attention as electrocatalysts for state-of-the-art fuel cells, and catalysts for hydrogen generation and hydrocarbons oxidation. Tuning the ion conductivity through doping A and B and subsequent formation of oxygen vacancies is essential for the performance of perovskites materials. To provide insights into factors that affect stability of oxygen vacancies and understand the origin of the activity of doped perovskite materials, we investigate the structure and energetics of cubic ABO₃ perovskites (A = La and/or Be, Mg, Ca, Sr, Ba; B = Ti, V, Cr, Mn, Fe, Co, and Ni) using density functional theory calculations. It is found that the lattice constant of ABO₃ generally increases as the ionic radius of A and B; the bulk formation energy of ABO₃ is decomposed into the ionization energy and lattice energy, which depend on the ionic radius and valence. The trend of bulk formation energy corresponds to that of ionization energy at a given ionic valence, while corresponds to that of lattice energy as doping La by alkali earth metals with lower valence. There exists a good linear relationship between the bulk formation energy and oxygen vacancy formation energy. This work provides an understanding toward the origin of the activity of perovskites at the atomic level.