共轭多烯异核双金属配合物的合成及性质

分子电子器件是近年来的一个热门课题,共轭有机分子是形成分子导线、分子开关等分子电子器件的模型化合物之一,其中一些已经得到应用.过去几年中,以sp碳为骨架的共轭桥联双金属配合物备受关注,长度为20个碳原子的此类双金属配合物已合成,大多数此类配合物金属端基之间有电子相互作用,具有良好的光电性质.由于合成的困难,以sp2碳为骨架的共轭多烯双金属配合物,近年来才有报道[1,2],且都是同核双金属配合物.共轭多烯异核双金属配合物的报道很少,由于分子的不对称,它们具有非线性光学性质.本文选用一取代二茂铁的三苯基磷盐与醛发生Wittig反应,生成的多烯单炔金属配合物与金属氢化物RuHCl(CO)(PPh3)3发生插入反应,合成了一系列长度为6个碳的稳定的共轭多烯异核双金属配合物(Scheme 1).     

用于设计分子导线和分子开关的双核混价配合物

分子电子器件的研制是近年来的一个热点课题，桥联混价双核配合物是分子导线和分子开关研究的理想模型化合物，本文介绍了桥配体导电性的测量评估方法和分子开关的主要类型，并着重介绍了近年来用于这一领域研究的重要配合物体系。     

卟啉及BODIPY衍生物设计合成及光物理性质研究基于分子玻璃主体材料的极紫外(EUV)光刻胶研发

<正>第一部分卟啉及BODIPY衍生物设计合成及光物理性质研究大π共轭有机化合物因其优良光电性质近年来引起广泛关注.卟啉和BODIPY是两类具有特殊电子结构和光谱性质的共轭化合物,通过功能化修饰可以实现对其光电性质的调控。本论文工作针对基于卟啉和BODIPY结构的大π共轭化合物的合成和光物理性质开展研究工作。具体研究内容如下:1.设计合成了分别以咔唑、芴和芴酮为桥的β-β桥联环状锌卟啉化合物。共轭桥对卟啉环电子离域     

硫原子桥联芳基取代/稠合四硫富瓦烯

近年来,四硫富瓦烯(Tetrathiafulvalene,TTF)衍生物的设计合成、超分子组装、组装材料的物理性能研究及其在有机电子器件中的应用引起了人们广泛的研究兴趣。在本文中,我们简略综述硫原子桥联芳基取代/稠合四硫富瓦烯衍生物(Ar-S-TTF)的最新研究进展,包括其高效合成、电化学及光学性能研究、分子的结构特征/空间堆积方式,以及此类分子与球形原子簇(富勒烯、杂多酸)之间的超分子组装及组装材料的性能。     

联喹啉桥联双环糊精对染料客体分子的协同键合

采用荧光光谱滴定的方法测定了一系列联喹啉桥联双环糊精在磷酸缓冲溶液中(25 ℃, pH＝7.2)与几种染料客体分子形成化学计量比为1∶1的超分子配合物的稳定常数. 结果表明, 拥有刚性和大(电子体系的联喹啉桥联双环糊精比相应的联吡啶桥联双环糊精对三角形的RhB分子和线形的AR分子具有更强的分子键合能力. 二维核磁的研究证实, 桥联双环糊精对客体分子强的键合能力起源于在一个分子内两个环糊精单元的协同键合. 桥联双环糊精对染料客体分子的选择键合能力从主-客体间的尺寸/形状匹配以及几种弱相互作用力的协同效应进行了讨论.     

茂铁类单分子结电子传输性质的研究进展

分子导线是构成分子器件的关键部分,它的发展有望解决未来将要面临的电子器件尺寸即将达到理论极限而无法满足人们更高需求的问题.茂铁类分子凭借优秀的物理、化学性质被广泛应用于非线性光学、分子电子学等领域.在过去的十多年里,茂铁基团的引入构建了多种结构新颖的分子导线,为单分子器件的基础研究做出了巨大贡献.然而对于茂铁类分子导线的研究,大多集中于其异茂环取代的衍生物,同茂环取代的衍生物因合成较为困难,并没有受到研究者们的关注.根据分子的结构特征,将茂铁类分子导线分为π共轭型与非π共轭型两大类.以分子的构效关系为主线,对近十几年来茂铁类单分子结电子传输性质方面的工作进行了概括与总结,期望为未来茂铁类分子导线的研究提供借鉴.     

一维链状叠氮桥联的铜配位聚合物[Cu(N3)2(C6H8N2)]n的合成、晶体结构和磁性

分子基磁体的研究已经成为当今化学、物理学和材料科学领域最具挑战性的研究方向之一.分子基磁体中,顺磁中心之间的耦合作用通常是通过桥联配体来实现的,常用的桥联配体主要有草酸根(C2O42-)及其衍生物[1]、氰根(CN-)[2]、肟桥(NO-)[3]、二氰胺桥(dca-)[4]及叠氮桥(N3-)[5]等共轭小分子,其中叠氮桥联配合物不仅表现出最多样化的桥联方式和聚合结构(Schene 1),在磁性传递上也最富有变化.     

水溶性共轭聚合物分子刷的研究进展

水溶性共轭聚合物研究属于国际前沿研究领域,因其具有水溶性和超级信号放大作用,在生物传感领域展现出良好的应用前景.但由于传统水溶性线型共轭高分子两亲性结构特点,其含有的憎水性刚性共轭链在水溶液中易聚集,水分子对共轭链激发态的影响导致其发光效率低(一般小于30%),严重制约了其应用与拓展.如何方便有效构筑高分子的高支化是获得高荧光效率的关键.在本篇综述中,我们综述了水溶性共轭聚合物分子刷的合成技术,分析了其结构与光学性质的关系,为水溶性共轭聚合物分子刷的设计和制备提供指导.另外,总结了水溶性共轭聚合物分子刷在化学生物传感、生物成像、药物运输、癌症治疗等领域的应用,最后对水溶性共轭聚合物分子刷存在的主要问题以及未来的热点方向进行了分析和展望!     

基于环糊精包结络合作用的大分子自组装*

本文综述了基于环糊精包结络合作用的大分子自组装的研究进展,包括：（1) 线型、梳型、多臂星型或超支化聚合物与环糊精或其二聚体自组装形成多聚轮烷（分子项链）、多聚准轮烷、双多聚（准）轮烷、分子管、双分子管、超分子凝胶及其应用;（2）桥联环糊精与桥联客体分子自组装制备线型或超支化超分子聚合物;（3）温度、pH值、光及客体分子刺激响应智能体系; （4) 通过亲水性的环糊精线型均聚物与含金刚烷的疏水性聚合物之间的包结络合作用来制备高分子胶束及其空心球等。     

桥联杯[6]芳烃研究进展

综述了桥联杯[6]芳烃的合成及构象固定等方面的研究进展,并以下缘1,4位桥联杯[6]芳烃,杯[6]冠醚和杯[6]穴醚及其类似物等主体分子为重点,综述了桥联杯[6]芳烃在分子识别和超分子化学领域中的应用研究的最新进展。     

Polyfunctional Two- (2D) and Three- (3D) Dimensional Oxalate Bridged Bimetallic Magnets

Summary.  We report major results concerning polyfunctional two- (2D) and three- (3D) dimensional oxalate bridged bimetallic magnets. As a consequence of their specific organisation they are composed of an anionic sub-lattice and a cationic counter-part. These bimetallic polymers can accommodate various counter-cations possessing specific physical properties in addition to the magnetic ones resulting from the interactions between the metallic ions in the anionic sub-lattice. Thus, molecular magnets possessing paramagnetic, conductive and optical properties are presented in this review. Corresponding author. E-mail: train@ccr.jussieu.fr Received April 11, 2002; accepted May 27, 2002     

草酸根桥联的Cu_2~ⅡFe~Ⅲ、Ni_2~ⅡFe~Ⅲ、Co_2~ⅡFe~Ⅲ异三核配合物的合成、表征及抗菌活性

合成了 7种草酸根桥联的 Cu 2 Fe 、Ni 2 Fe 、Co 2 Fe 异三核配合物 [M2 Fe(C2 O4) 3Lx](Cl O4) ,(M=Cu,L=bpy,Me2 phen,NO2 phen,x=2 ;M=Ni,Co,L=bpy,Me2 phen,x=4 ) .经元素分析、摩尔电导和磁性的测定以及红外光谱和电子光谱等方法对这些配合物进行了表征 ,确定了配合物的组成和结构 .初步生物活性试验表明形成异三核配合物后其杀菌活性明显提高     

Heterobimetallic NiFe Cooperative Molecular Water Oxidation Catalyst

We reported herein the development of heterobimetallic NiFe molecular platform to understand NiFe synergistic effect in water oxidation catalysis. Compared to homonuclear bimetallic compounds (NiNi and FeFe), NiFe complex possesses more remarkable catalytic water oxidation performance. Mechanistic studies suggest that this remarkable difference is attributed to the fact that NiFe synergy can effectively promote O−O bond formation. The generated Ni^III(μ-O)Fe^IV=O is the key intermediate and O−O bond was formed via intramolecular oxyl-oxo coupling between bridged O radical and terminal Fe^IV=O moiety.     

CO在Pd系双金属及其单金属催化剂上的吸脱附红外光谱

红外光谱表明吸附在担载于Al_2O_3上的Pd-Cu、Pd-Ag、Pd-Co和Pd-Pt 双组分催化剂上的CO仍保持其在单金属上的主要吸附物种,但其部分CO吸收带发生位移,吸附的CO易于脱附.CO在还原态Pd-Cu和Pd-Ag双金属催化剂上以吸附于Pd上者为主,其吸收带明显变弱而更易脱附.在Pd- Pt和Pd-Co氧化和还原态催化剂上CO桥式和线式吸收带强度比发生显著变化.似乎在这二类双金属催化剂上的几何结构效应比电子配位效应更为明显.     

外电场作用下寡聚苯分子导线的性质

利用Hartree-Fock 方法在6-31G*水平上对聚苯分子进行了计算研究. 分别从几何构型、分子轨道空间分布和分子轨道能级三个方面讨论了外电场对寡聚苯分子导线的影响, 给出了分子导线的性质与外电场的关系. 进一步, 连接硫原子于聚苯分子的两端, 并共价结合在金电极上. 利用非平衡格林函数方法对其在0-2.0 V 偏压下电子输运特征进行了深入研究.     

Bimetallic Cooperativity and Hydrogen Bonding Allow Efficient Reduction of CO2

Reducing CO₂ selectively to one of the several C1 products is challenging, as the thermodynamic reduction potentials for the different n e⁻/n H⁺ reductions of CO₂ are similar and so is the reduction potential for H⁺ reduction. Recently, Halime, Aukauloo, and co-workers have taken inspiration from the active site of nickel CO dehydrogenase (Ni-CODH) to design bimetallic iron porphyrins bridged by a urea moiety. These complexes show fast and selective reduction of CO₂ to CO and the results suggest a Ni-CODH type mechanism at play where one of the two metals binds and reduces the CO₂ while the other stabilizes the reduced species by forming a bridged complex, facilitating the C−O bond cleavage.     

Charge-transfer interactions in face-to-face porphyrin-fullerene systems: solvent-dependent luminescence in the infrared spectral region

The cyclophane-type molecular dyads 1 x 2H and 1 x Zn, in which a doubly bridged porphyrin donor adopts a close, tangential orientation relative to the surface of a fullerene acceptor, were prepared by Bingel macrocylization. The porphyrin derivatives 2 x 2H and 2 x Zn with two appended, singly linked C60 moieties were also formed as side products. NMR investigations revealed that the latter compounds strongly prefer conformations with one of the carbon spheres nesting on the porphyrin surface, thereby taking a similar orientation to that of the fullerene moiety in the doubly bridged systems. Cyclic voltammetric measurements showed that the mutual electronic effects exerted by the fullerene on the porphyrin and vice versa are only small in all four dyads, despite the close proximity of the donor and acceptor components. The steady-state and time-resolved absorption and luminescence properties of 1 x Zn and 2 x Zn were investigated in toluene solution and it was shown that, upon light excitation, both the porphyrin- and the fullerene-centered excited states are deactivated to a lower-lying CT state, emitting in the IR spectral region (lambda max = 890 and 800 nm at 298 and 77 K, respectively). In the more polar solvent benzonitrile, this CT state is still detected but, owing to its very low energy (below 1.4 eV), is not luminescent and shorter-lived than in toluene. The remarkable observation of similar photophysical behavior of 1 x Zn and 2 x Zn suggests that a tight donor-acceptor distance cannot only be established in doubly bridged cyclophane-type structures but also in singly bridged dyads, by taking advantage of favourable fullerene-porphyrin ground-state interactions.     

Product‐Derived Bimetallic Palladium Complex Catalyzes Direct Carbonylation of Sulfonylazides

A novel product‐derived bimetallic palladium complex catalyzes a sulfonylazide‐transfer reaction with the σ‐donor/π‐acceptor ligand CO, and is advantageous given its broad substrate scope, high efficiency, and mild reaction conditions (atmospheric pressure of CO at room temperature). This methodology provides a new approach to sulfonylureas, which are present in both pharmaceuticals and agrochemicals. The synthesis of Glibenclamide on a gram scale further revealed the practical utility of this procedure. Mechanistically, the generation of a bridged bimetallic palladium species derived from the product sulfonylurea is disclosed as the crucial step for this catalytic cycle.     

Mössbauer and Electrochemical Studies of Bridged Biferrocenes and Biferrocenylenes

A series of neutral and oxidized π-bridged biferrocenes (Fc—x—Fc) and biferrocenylenes (FC(—x—)₂Fc) (x= —CH=CH—, —CH₃,C=CCH₃—) were prepared and their physical properties have been studied by means of Mössbauuer and cyclic voltammetry. The electrode reaction of these bridged ferrocene derivatives appears to involve a consecutive two-step oxidation process. The results also show that the voltage difference between the first and second oxidaton potentials of the bridged biferrocenes was found to be largely exceeded that founded for the corresponding the bridged biferrocenylenes. The Mössbauer data show that the oxidation of doubly bridged Fc(—x—)₂Fc with iodine, DDQ, and TCNQ given the corresponding dioxidized salts only and no stable mixed-valence compounds were found.     

Switchable electronic coupling in model oligoporphyrin molecular wires examined through the measurement and assignment of electronic absorption spectra

The use of a quinone functionality in the linkage unit of laterally bridged oligoporphyrins as a switch for controlling electronic coupling between the termini is examined. The quinone-bridged bisporphyrin P(2)TA-O(2) was synthesized by condensation of 2 equiv of the dione 2,3-dioxo-5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)chlorin with 2,3,5,6-tetraamino-1,4-benzoquinone. The electronic absorption spectra of P(2)TA-O(2) and its conjugated benzenoid analogue P(2)TA are measured and assigned, in conjunction with the spectra of the fragment monomers and porphyrin-bridge compounds. Band homologies and CASPT2 calculations are used to make the assignments. Chemically, the dimer in one case is bridged by a through-conjugated, pi-delocalized 1,4,5,8-tetraazaanthracene molecule. This is shown to display significant inter-porphyrin coupling, with an observed difference in the exciton couplings of the B(x) and B(y) bands being ca. 0.18 eV. However, the other dimer is bridged using a derivative in which the central ring is converted to a cross-conjugated, pi-localized quinonoid form; this molecule displays no observable inter-porphyrin coupling. This scenario provides a paradigm for the use of molecular electronic devices in sensing, control, and high-capacity relatively low-speed data storage applications.