首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
考虑部分机器需要周期维护,其余机器无需维护的混合型平行机调度问题。一组给定的可中断且加工时长均相等的工件需要加工,工件数不超过机器数。目标是将所有工件安排到机器上加工,使得时间表长最小。首先分析一些特殊情况;然后对于一般情况通过建立注水模型给出最优时间表长的一个下界;接着对水位的2种情况分别给出目标值等于下界的多项式时间算法;最后给出了求解该调度问题的一个多项式时间最优算法。  相似文献   

2.
研究带有恶化效应、学习效应和可用性限制的单机和2台平行机的排序问题。在这个模型中,工件的实际加工时间与其基本加工时间、加工过程中所排位置及开始加工时间有关;同时由于维修、保养等原因,使得机器在某段时间不能加工工件,即机器具有可用性限制,且维修之后机器性能完全恢复,讨论的目标函数为总完工时间。对于可以在任意时间只维修一次的单机问题,以及只有一台机器具有可用性限制的2台平行机问题,分别给出了拟多项式时间的动态规划算法。特别对于一台机器只在零时刻开始维修另一台机器无可用性限制的特殊情况,通过将其转化为指派问题,给出了复杂性为O(n4)的多项式时间最优算法,并通过一个数值例子说明了其计算过程。  相似文献   

3.
考虑工件可拒绝的分批配送问题:一个制造商为一个客户加工n个工件,每个工件既可以被接受加工,也可以被拒绝加工(但要支付拒绝费用),工件加工完之后要安排车辆运送给客户,完工时间为工件送达客户的时间.目标函数为被接受工件的总完工时间、总配送费用和被拒绝工件的总拒绝费用三者之和,文中对处理机为单机的情形给出了多项式时间算法,且证明了两台平行机的情形下该问题是NP-完备的,并给出了伪多项式时间算法.  相似文献   

4.
研究两台平行机环境下加工时间线性退化的可拒绝排序问题,工件的实际加工时间是关于该工件开始加工时间的线性函数,每个工件都有一个独立的截止工期,在截止工期之前或之后完工的任务将分别受到提前和误工工件惩罚。工件允许被拒绝,如果工件被拒绝则需要支付一定的拒绝费用。目标是分别确定接受工件和拒绝工件的任务集合,找到接受任务的最优排序和每个被接受工件的最优任务工期最小化工期、误工工件惩罚、总完工时间以及被拒绝工件的惩罚费用之和。证明了此 NP 难问题可以通过动态规划方法求得最优解,并通过动态规划运用简化执行空间的方法给出了复杂度为o(n5D2/ε2)的全多项式近似策略(FPTAS),其中 n 表示工件的数量,ε 是允许误差界。
  相似文献   

5.
:文章讨论退化工件2台机器异序车间作业排序问题。在异序车间作业环境中,每个工件由一些工序组成,工序的个数未必与机器数相同。此外,每个工件有各自的工序加工顺序。工件可能多次在某些机器上加工,也可能根本不在某些机器上加工。假设工件的实际加工时间是其开始时间的比例函数,目标函数是极小化最大完工时间。首先证明了具有任意工序的问题是强意义下NP-难的;然后对每个工件最多只有2个工序的问题给出了多项式算法;最后证明了只有2个工序具有准备时间或截止工期的问题是普通意义NP-难的。  相似文献   

6.
考虑工件有到达时间并且可拒绝的m台无界平行批处理机最小化最大完工时间的排序问题.如果拒绝一个工件,要花费一定的惩罚费用;如果接受这个工件,在m台机器中的一台上分批加工,定义一批的加工时间为这批中所包含的最长工件的加工时间.目标函数是最小化接受工件的最大完工时间与拒绝工件的费用之和.当m是一个给定的数时,给出了这个问题的一个拟多项式时间算法和一个完全多项式时间近似方案.  相似文献   

7.
为缩短工件的完工时间,将极小化最大完工时间的平行机排序问题作为研究目标.在此问题中,允许同一工件拆分成多个子工件在不同的机器上同时加工,同一工件的任何2个子工件不可在同一台机器上加工.与以往研究不同,对工件的拆分方式进行了限制,即工件拆分后所得子工件的长度不能小于给定的阀值,且工件拆分次数尽量少,这是一个NP难问题.借助于LPT算法的思想,提出了一个求解该问题的启发式算法,实现了工件的自动拆分和工件到机器上的自动分配.通过多个实例对文中算法进行了测试,数值结果表明:该算法可行、稳定性良好,适用于工件拆分方式具有类似限制的平行机排序问题的方案决策.  相似文献   

8.
针对钢铁企业生产前存在不可忽略运输的实际,研究了生产与生产前运输费用协调调度问题.由于钢铁企业被调度的工件体积较大及加工前不能等待太长的时间,因此运输车辆的容量及工件在机器前的缓冲等待时间有限制.考虑的机器环境为单机环境,单机前有无限的缓冲空间,运输车辆数目无限,调度的目标函数为传统的调度函数加上运输费用.对于不同的目标函数,证明了工件在单机加工前缓冲等待时间有限制的调度问题是强NP难的,对于运输车辆有容量限制问题的可解情况给出了多项式时间算法.  相似文献   

9.
笔者考虑的工件带有到达时间,且到达时间与工期同序、目标函数为加权误工工件数的单台串行批处理机排序问题是NP-难的,其中批处理机的容量无限。当同一批中的工件都到达后,此批才可以开始加工。同一批中工件的开始加工时间相同,批的加工时间为此批中所有工件的加工时间之和,且完工时间也相同,为这批中最后一个工件的完工时间;每批开始加工之前都有一个固定的调整时间,而批内工件间无调整时间,在批的调整时间内机器不能加工任何工件。研究工件带有2个不同到达时间,且到达时间与工期同序的情况。对于目标函数为加权误工工件数问题,分析了其最优解的性质,给出了拟多项式动态规划算法及其时间复杂性。  相似文献   

10.
本文研究的是一类带有不可用区间和线性退化效应的单机无界并行批处理机排序问题。工件开始加工时间的线性递增函数看成其实际的加工时间。批工件中加工时间的最大者为这批的加工时间,同批工件同时开始加工,且批一旦开始加工就不可中断,同批中工件的完工时间都相同并为这批的完工时间。本文通过对最优解性质的分析,分别给出了求解极小化最大费用和极小化总费用的拟多项式时间算法。特别当k固定、目标函数为误工工件数时,该问题为多项式时间可解的,并用数值例子验证了算法的有效性。  相似文献   

11.
Language markedness is a common phenomenon in languages, and is reflected from hearing, vision and sense, i.e. the variation in the three aspects such as phonology, morphology and semantics. This paper focuses on the interpretation of markedness in language use following the three perspectives, i.e. pragmatic interpretation, psychological interpretation and cognitive interpretation, with an aim to define the function of markedness.  相似文献   

12.
理论推导与室内实验相结合,建立了低渗透非均质砂岩油藏启动压力梯度确定方法。首先借助油藏流场与电场相似的原理,推导了非均质砂岩油藏启动压力梯度计算公式。其次基于稳定流实验方法,建立了非均质砂岩油藏启动压力梯度测试方法。结果表明:低渗透非均质砂岩油藏的启动压力梯度确定遵循两个等效原则。平面非均质油藏的启动压力梯度等于各级渗透率段的启动压力梯度关于长度的加权平均;纵向非均质油藏的启动压力梯度等于各渗透率层的启动压力梯度关于渗透率与渗流面积乘积的加权平均。研究成果可用于有效指导低渗透非均质砂岩油藏的合理井距确定,促进该类油藏的高效开发。  相似文献   

13.
As an American modern novelist who were famous in the literary world, Hemingway was not a person who always followed the trend but a sharp observer. At the same time, he was a tragedy maestro, he paid great attention on existence, fate and end-result. The dramatis personae's tragedy of his works was an extreme limit by all means tragedy on the meaning of fearless challenge that failed. The beauty of tragedy was not produced on the destruction of life, but now this kind of value was in the impact activity. They performed for the reader about the tragedy on challenging for the limit and the death.  相似文献   

14.
正The periodicity of the elements and the non-reactivity of the inner-shell electrons are two related principles of chemistry,rooted in the atomic shell structure.Within compounds,Group I elements,for example,invariably assume the+1 oxidation state,and their chemical properties differ completely from those of the p-block elements.These general rules govern our understanding of chemical structures and reactions.Using first principles calcula-  相似文献   

15.
We have developed an adiabatic connection to formulate the ground-state exchange-correlation energy in terms of pairing matrix linear fluctuations.This formulation of the exchange-correlation energy opens a new channel for density functional approximations based on the many-body perturbation theory.We illustrate the potential of such approaches with an approximation based on the particle-particle Random Phase Approximation(pp-RPA).This re-  相似文献   

16.
正The electronic and nuclear(structural/vibrational)response of 1D-3D nanoscale systems to electric fields gives rise to a host of optical,mechanical,spectral,etc.properties that are of high theoretical and applied interest.Due to the computational difficulty of treating such large systems it is convenient to model them as infinite and periodic(at least,in first approximation).The fundamental theoretical/computational problem in doing so is that  相似文献   

17.
For molecular systems,the quantum-mechanical treatment of their responses to static electromagnetic fields usually employs a scalar-potential treatment of the electric field and a vector-potential treatment of the magnetic field.Although the potential for each field separately is associated with the choice of an(unphysical)origin,the precise choice of the origin for the electrostatic field has little consequences for the results.This is different for the  相似文献   

18.
Franck-Condon factors bridge the gap between theoretical modeling and experimental observations for molecular electronic spectroscopy and electron transfer.Under the displaced harmonic oscillator approximation,multidimensional Franck-Condon factors are decomposed into a product of many one-dimensional(1D)Franck-Condon(FC)factors,and each 1D-FC factor is associated with one Huang-Rhys factor that determines the leading contribution of  相似文献   

19.
<正>"The Journal of Shanghai Normal University:Mathematics"is published by Shanghai Normal University as regular issues of The Journal of Shanghai Normal University each year from 2014 in English.The editors-in-chief of the issues are professors Yuhao Cong and Maoan Han.The Journal of Shanghai Normal University was started in 1958 with  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号