Economic valuation of green hydrogen charging compared to gray hydrogen charging: The case of South Korea

The South Korean government promotes hydrogen-powered vehicles to reduce greenhouse gas (GHG) emissions but these vehicles use gray hydrogen while charging, which causes GHG emissions. Therefore, converting this fuel into green hydrogen is necessary to help reduce GHG emissions, which will incur investment costs of approximately USD 20 billion over a decade. In this study, a contingent valuation method is applied in an analysis to examine the extent to which consumers are willing to pay for green hydrogen charging compared to gray hydrogen charging. The results indicate that the monthly mean of willingness to pay per driver is 51,674 KRW (USD 45.85), equivalent to 4302 KRW per kg (USD 3.82). Additionally, consumers accept a 28.5% increase in the monthly average fuel expenses when converting to green hydrogen. These findings can be used in the development of pricing and energy use plans to finance the expansion of green hydrogen infrastructure.     

On the economics of a hydrogen bus fleet powered by a wind park – A case study for Austria

This paper investigates the economics of a fuel cell bus fleet powered by hydrogen produced from electricity generated by a wind park in Austria. The main research question is to simultaneously identify the most economical hydrogen generation business model for the electric utility owning wind power plants and to evaluate the economics of operating a fuel cell bus fleet, with the core objective to minimize the total costs of the overall fuel supply (hydrogen production) and use (bus and operation) system. For that, three possible operation modes of the electrolyzer have been identified and the resulting hydrogen production costs calculated. Furthermore, an in-depth economic analysis of the fuel cell buses as well as the electrolyzer technology has been conducted. Results show that investment costs are the largest cost factor for both technologies. Thus, continuous hydrogen production with the smallest possible electrolyzer is the economically most favorable option. In such an operation mode (power grid), the costs of production per kg/H₂ were the lowest. However, this means that the electrolyzer cannot be solely operated with electricity from the wind park, but is also dependent on the electricity mix from the grid. For fuel cell buses, the future cost development will depend very much on the respective policies and funding programs for the market uptake, as to date, the total cost of use for the fuel cell bus is more than two times higher than the diesel bus. The major final conclusion of this paper is that to make fuel cell electric busses competitive in the next years today severe policy interferences, such as subsidies for these busses as well as electrolyzers and bans for fossil energy, along with investments in the setup of a hydrogen infrastructure, are necessary.     

A review on current trends in potential use of metal-organic framework for hydrogen storage

Hydrogen can be a promising clean energy carrier for the replenishment of non-renewable fossil fuels. The set back of hydrogen as an alternative fuel is due to its difficulties in feasible storage and safety concerns. Current hydrogen adsorption technologies, such as cryo-compressed and liquefied storage, are costly for practical applications. Metal-organic frameworks (MOFs) are crystalline materials that have structural versatility, high porosity and surface area, which can adsorb hydrogen efficiently. Hydrogen is adsorbed by physisorption on the MOFs through weak van der Waals force of attraction which can be easily desorbed by applying suitable heat or pressure. The strategies to improve the MOFs surface area, hydrogen uptake capacities and parameters affecting them are studied. Hydrogen spill over mechanism is found to provide high-density storage when compared to other mechanisms. MOFs can be used as proton exchange membranes to convert the stored hydrogen into electricity and can be used as electrodes for the fuel cells. In this review, we addressed the key strategies that could improve hydrogen storage properties for utilizing hydrogen as fuel and opportunities for further growth to meet energy demands.     

A review of hydrogen usage in internal combustion engines (gasoline-Lpg-diesel) from combustion performance aspect

Demand for fossil fuels is increasing day by day with the increase in industrialization and energy demand in the world. For this reason, many countries are looking for alternative energy sources against this increasing energy demand. Hydrogen is an alternative fuel with high efficiency and superior properties. The development of hydrogen-powered vehicles in the transport sector is expected to reduce fuel consumption and air pollution from exhaust emissions. In this study, the use of hydrogen as a fuel in vehicles and the current experimental studies in the literature are examined and the results of using hydrogen as an additional fuel are investigated. The effects of hydrogen usage on engine performance and exhaust emissions as an additional fuel to internal combustion gasoline, diesel and LPG engines are explained. Depending on the amount of hydrogen added to the fuel system, the engine power and torque are increased at most on petrol engines, while they are decreased on LPG and diesel engines. In terms of chemical products, the emissions of harmful exhaust gases in gasoline and LPG engines are reduced, while some diesel engines increase nitrogen oxide levels. In addition, it is understood that there will be a positive effect on the environment, due to hydrogen usage in all engine types.     

Metaheuristic-based energy management strategies for fuel cell emergency power unit in electrical aircraft

This paper aims at presenting a comparative analysis of different metaheuristic algorithms in the application of energy management for fuel cell-based hybrid emergency power unit within electrical aircraft. Two energy management conventional strategies are employed while optimizing the operating temperature. Both the external energy maximization and the equivalent consumption minimization strategies are dealt with. The most efficient up-to-date metaheuristic techniques such as the artificial bee colony, the grey wolf optimization, the cuckoo search, the mine blast algorithm, the whale optimization algorithm, the moth swarm algorithm, the harmony search, the modified flower pollination algorithm and the electromagnetic field optimization are considered. The overall index of optimization performance is considered as a function of hydrogen consumption, overall system efficiency, variations of states of charge and stresses in different energy sources. The numerical simulations, through Matlab™/Simulink, highlights the capability of the different metaheuristic optimization techniques towards reducing the amount of consumed hydrogen in fuel cell-based emergency power unit in electrical aircrafts. The electromagnetic field optimization method results in significant hydrogen consumption reduction in comparison with the other proposed techniques.     

Review of hydrogen economy in Malaysia and its way forward

Heavy fossil fuels consumption has raised concerns over the energy security and climate change while hydrogen is regarded as the fuel of future to decarbonize global energy use. Hydrogen is commonly used as feedstocks in chemical industries and has a wide range of energy applications such as vehicle fuel, boiler fuel, and energy storage. However, the development of hydrogen energy in Malaysia is sluggish despite the predefined targets in hydrogen roadmap. This paper aims to study the future directions of hydrogen economy in Malaysia considering a variety of hydrogen applications. The potential approaches for hydrogen production, storage, distribution and application in Malaysia have been reviewed and the challenges of hydrogen economy are discussed. A conceptual framework for the accomplishment of hydrogen economy has been proposed where renewable hydrogen could penetrate Malaysia market in three phases. In the first phase, the market should aim to utilize the hydrogen as feedstock for chemical industries. Once the hydrogen production side is matured in the second phase, hydrogen should be used as fuel in internal combustion engines or burners. In the final phase hydrogen should be used as fuel for automobiles (using fuel cell), fuel-cell combined heat and power (CHP) and as energy storage.     

Performance evaluation of a solarized gas turbine system integrated to a high temperature electrolyzer for hydrogen production

In this paper, the performance of a solar gas turbine (SGT) system integrated to a high temperature electrolyzer (HTE) to generate hybrid electrical power and hydrogen fuel is analyzed. The idea behind this design is to mitigate the losses in the electrical power transmission and use the enthalpy of exhaust gases released from the gas turbine (GT) to make steam for the HTE. In this context, a GT system is coupled with a solar tower including heliostat solar field and central receiver to generate electrical power. To make steam for the HTE, a flameless boiler is integrated to the SGT system applying the SGT extremely high temperature exhaust gases as the oxidizer. The results indicate that by increasing the solar receiver outlet temperature from 800 K to 1300 K, the solar share increases from 22.1% to 42.38% and the overall fuel consumption of the plant reduces from 7 kg/s to 2.7 kg/s. Furthermore, flameless mode is achievable in the boiler while the turbine inlet temperature (TIT) is maintained at the temperatures higher than 1314 K. Using constant amounts of the SGT electrical power, the HTE voltage decreases by enhancing the HTE steam temperature which result in the augmentation of the overall hydrogen production. To increase the HTE steam temperature from 950 K to 1350 K, the rate of fuel consumption in the flameless boiler increases from 0.1 m/s to 0.8 m/s; however, since the HTE hydrogen production increases from 4.24 mol/s to 16 mol/s it can be interpreted that the higher steam temperatures would be affordable. The presented hybrid system in this paper can be employed to perform more thermochemical analyses to achieve insightful understanding of the hybrid electrical power-hydrogen production systems.     

Reinforcement learning based energy management systems and hydrogen refuelling stations for fuel cell electric vehicles: An overview

This paper examines the current state of the art of hydrogen refuelling stations-based production and storage systems for fuel cell hybrid electric vehicles (FCHEV). Nowadays, the emissions are increasing rapidly due to the usage of fossil fuels and the demand for hydrogen refuelling stations (HRS) is emerging to replace the conventional vehicles with FCHEVs. Hence, the availability of HRS and its economic aspects are discussed. In addition, a comprehensive study is presented on the energy storage systems such as batteries, supercapacitors and fuel cells which play a major role in the FCHEVs. An energy management system (EMS) is essential to meet the load requirement with effective utilisation of power sources with various optimizing techniques. A detailed comparative analysis is presented on the merits of Reinforcement learning (RL) for the FCHEVs. The significant challenges are discussed in depth with potential solutions for future work.     

Technological-economic assessment and optimization of hydrogen-based transportation systems in China: A life cycle perspective

Hydrogen energy is increasingly incorporated into long-distance transportation systems. Whether the coupled hydrogen-based transportation system can achieve a sustainable business operation mode requires quantification of environmental and economic performance by a comprehensive cost-benefit analysis. This study proposes a cost-based life cycle assessment method to evaluate the environmental and economic benefits of hydrogen-based long-distance transportation systems. The innovative cost assessment method introduces internal and external economic costs to conduct a multi-scenario assessment. According to the key factors of mileage, government subsidies and hydrogen fuel prices, this research identifies the key cost component of the hydrogen-based transportation system in China by using a multilevel comparison with cell-driven and oil-fueled vehicles. The results show that hydrogen fuel cell electric vehicles are competitive in terms of both fuel costs and environmental costs. As hydrogen costs are expected to be gradually reduced by 43% in the future, hydrogen logistics vehicles and heavy trucks are expected to have better life-cycle economics than other energy vehicles by approximately 2030. Hydrogen buses will outperform other vehicles by approximately 2033, while hydrogen passenger cars will have a reduced life-cycle cost per kilometre within 0.1 CHY/km compared to other vehicles by approximately 2035. Ultimately, fuel consumption, average annual mileage, and hydrogen fuel cell electric vehicle policy are three factors that have greater impacts. Policy implications are put forward to implement optimal investment plan for hydrogen transportation systems.     

Effect of high compression ratio on improving thermal efficiency and NOx formation in jet plume controlled direct-injection near-zero emission hydrogen engines

The Plume Ignition and Combustion Concept (PCC) developed by the authors significantly reduced nitrogen oxide (NOx) emissions in a direct-injection hydrogen engine under high-load operation. With PCC, a rich fuel plume is ignited immediately after completion of injection in the latter half of the compression stroke to reduce NOx formation. Simultaneously, high thermal efficiency was also achieved by mitigating cooling losses through optimization of the jet configuration in the combustion chamber. This basic combustion concept was applied to burn lean mixture in combination with the optimized hydrogen jet configuration and the application of supercharging to recover the power output decline due to the use of a diluted mixture. As a result, a near-zero-emission-level engine has been achieved that simultaneously provides high thermal efficiency, high power output and low NOx emissions at a single-digit ppm level [1]. In this study, a high compression ratio was applied to improve thermal efficiency further by taking advantage of the characteristics of hydrogen fuel, especially its diluted mixture with a high anti-knock property. As a result, NOx emissions at a single-digit ppm level and gross indicated thermal efficiency of 52.5% were achieved while suppressing knocking at a compression ratio of 20:1 by optimizing the excess air ratio and injection timing, and increasing power output by supercharging.     

Hydrogen production for energy: An overview

Power to hydrogen is a promising solution for storing variable Renewable Energy (RE) to achieve a 100% renewable and sustainable hydrogen economy. The hydrogen-based energy system (energy to hydrogen to energy) comprises four main stages; production, storage, safety and utilisation. The hydrogen-based energy system is presented as four corners (stages) of a square shaped integrated whole to demonstrate the interconnection and interdependency of these main stages. The hydrogen production pathway and specific technology selection are dependent on the type of energy and feedstock available as well as the end-use purity required. Hence, purification technologies are included in the production pathways for system integration, energy storage, utilisation or RE export. Hydrogen production pathways and associated technologies are reviewed in this paper for their interconnection and interdependence on the other corners of the hydrogen square.Despite hydrogen being zero-carbon-emission energy at the end-use point, it depends on the cleanness of the production pathway and the energy used to produce it. Thus, the guarantee of hydrogen origin is essential to consider hydrogen as clean energy. An innovative model is introduced as a hydrogen cleanness index coding for further investigation and development.     

Preparation of hydrogen from metals and water without CO2 emissions

Considering the high calorific value and low-carbon characteristics of hydrogen energy, it will play an important role in replacing fossil energy sources. The production of hydrogen from renewable energy sources for electricity generation and electrolysis of water is an important process to obtain green hydrogen compared with classic low-carbon hydrogen production methods. However, the challenges in this process include the high cost of liquefied hydrogen and the difficulty of storing hydrogen on a large scale. In this paper, we propose a new route for hydrogen storage in metals, namely, electricity generation from renewable energy sources, electrolysis to obtain metals, and subsequent hydrogen production from metals and water. Metal monomers facilitate large-scale and long-term storage and transportation, and metals can be used as large-scale hydrogen storage carriers in the future. In this technical route, the reaction between metal and water for hydrogen production is an important link. In this paper, we systematically summarize the research progress, development trend, and challenges in the field of metal to hydrogen production. This study aim to aid in the development of this field.     

Biomass gasification coupled with producer gas cleaning,bottling and HTS catalyst treatment for H2-rich gas production

The aim of the present study is to demonstrate the production of hydrogen-rich fuel gas from J. curcas residue cake. A comprehensive experimental study for the production of hydrogen rich fuel gas from J. curcas residue cake via downdraft gasification followed by high temperature water gas shift catalytic treatment has been carried out. The gasification experiments are performed at different equivalence ratios and performance of the process is reported in terms of producer gas composition & its calorific value, gas production rate and cold gas efficiency. The producer gas is cleaned of tar and particulate matters by passing it through venturi scrubber followed by sand bed filter. The clean producer gas is then compressed at 0.6 MPa and bottled into a gas cylinder. The bottled producer gas and a simulated mixture of producer gas are then subjected to high temperature shift (HTS) catalytic treatment for hydrogen enriched gas production. The effect of three different operating parameters GHSV, steam to CO ratio and reactor temperature on the product gas composition and CO conversion is reported. From the experimental study it is found that, the presence of oxygen in the bottled producer gas has affected the catalyst activity. Moreover, higher concentration of oxygen concentration in the bottled producer gas leads to the instantaneous deactivation of the HTS catalyst.     

Pollutant emissions,performance and combustion behaviour assessment of an Si gas engine fuelled with Lcv gas containing carbon monoxide and hydrogen diluted by nitrogen

This paper includes the experimental test data of an SI engine fuelled with simulated LCV gas (Low Calorific Value), which resembles synthesis gas in composition. The LCV gas was simulated by a mixture of carbon monoxide, hydrogen and nitrogen. During the experiment, the lower heating value of the LCV gas was altered by dilution with nitrogen. A single-cylinder Honda GX270 engine was adopted in the experiment to assess the impact of LCV gas on the system performance. This engine is typically used to power various machines and for electrical energy production in small generator sets. A modified engine was connected to an electric generator, which was loaded with an electric resistor. Engine operation was controlled using a microprocessor controller. All tests were performed at constant engine speed (3000 rpm). The engine was working at wide-open throttle for all mixtures. All mixtures were burned at stoichiometric conditions and with fixed value of ignition timing (30 deg bTDC). The indicated performance of the SI engine was evaluated based on the in-cylinder pressure measurements. No significant impact on the main internal parameters of the tested SI engine fuelled with simulated LCV gas diluted by nitrogen was observed. The experimental tests showed that the combustion duration increased for the mixtures with higher content of inert gas. Increase in the LHV raised the specific emissions of NO_x and decreased specific emissions of CO and HC.     

Renewable-powered hydrogen economy from Australia's perspective

This article broadly reviews the state-of-the-art technologies for hydrogen production routes, and methods of renewable integration. It outlines the main techno-economic enabler factors for Australia to transform and lead the regional energy market. Two main categories for competitive and commercial-scale hydrogen production routes in Australia are identified: 1) electrolysis powered by renewable, and 2) fossil fuel cracking via steam methane reforming (SMR) or coal gasification which must be coupled with carbon capture and sequestration (CCS). It is reported that Australia is able to competitively lower the levelized cost of hydrogen (LCOH) to a record $(1.88–2.30)/kg_H2 for SMR technologies, and $(2.02–2.47)/kg_H2 for black-coal gasification technologies. Comparatively, the LCOH via electrolysis technologies is in the range of $(4.78–5.84)/kg_H2 for the alkaline electrolysis (AE) and $(6.08–7.43)/kg_H2 for the proton exchange membrane (PEM) counterparts. Nevertheless, hydrogen production must be linked to the right infrastructure in transport-storage-conversion to demonstrate appealing business models.     

Hydrogen production from phototrophic microorganisms: Reality and perspectives

Hydrogen is a promising alternative to fossil fuel for a source of clean energy due to its high energy content. Some strains of phototrophic microorganisms are known as important object of scientific research and they are being explored to raise biohydrogen (BioH₂) yield. BioH₂ is still not commonly used in industrial area because of the low biomass yield and valuable down streaming process. This article deals with the methods of the hydrogen production with the help of two large groups of phototrophic microorganisms – microalgae and cyanobacteria. Microalgal hydrogen is environmentally friendly alternative to conventional fossil fuels. Algal biomass has been considered as an attractive raw source for hydrogen production. Genetic modified strains of cyanobacteria are used as a perspective object for obtaining hydrogen. The modern photobioreactors and outdoor air systems have been used to obtain the biomass used for hydrogen production. At present time a variety of immobilization matrices and methods are being examined for their suitability to make immobilized H₂ producers.     

Improving inter-plant integration of syngas production technologies by the recycling of CO2 and by-product of the Fischer-Tropsch process

This paper deals with the emission reduction in synthesis-gas production by better integration and increasing the energy efficiency of a high-temperature co-electrolysis unit combined with the Fischer-Tropsch process. The investigated process utilises the by-product of Fischer-Tropsch, as an energy source and carbon dioxide as a feedstock for synthesis gas production. The proposed approach is based on adjusting process streams temperatures with the further synthesis of a new heat exchangers network and optimisation of the utility system. The potential of secondary energy resources was determined using plus/minus principles and simulation of a high-temperature co-electrolysis unit. The proposed technique maximises the economic and environmental benefits of inter-unit integration. Two scenarios were considered for sharing the high-temperature co-electrolysis and the Fischer-Tropsch process. In the first scenario, by-products from the Fischer-Tropsch process were used as fuel for a high-temperature co-electrolysis. Optimisation of secondary energy sources and the synthesis of a new heat exchanger network reduce fuel consumption by 47% and electricity by 11%. An additional environmental benefit is reflected in emission reduction by 25,145 tCO₂/y. The second scenario uses fossil fuel as a primary energy source. The new exchanger network for the high-temperature co-electrolysis was built for different energy sources. The use of natural gas resulted in total annual costs of the heat exchanger network to 1,388,034 USD/y, which is 1%, 14%, 116% less than for coal, fuel oil and LPG, respectively. The use of natural gas as a fuel has the lowest carbon footprint of 7288 tCO₂/y. On the other hand, coal as an energy source has commensurable economic indicators that produce 2 times more CO₂, which can be used as a feedstock for a high-temperature co-electrolysis. This work shows how in-depth preliminary analysis can optimise the use of primary and secondary energy resources during inter-plant integration.     

Sustainable biohydrogen production by Chlorella sp. microalgae: A review

The use of fossil fuels is causing a huge environmental impact due to the emission of air pollutants, greenhouse gases, and other ground and water contaminants; also, these fuels are depleting; the world is facing an energy crisis in the years to come if no preventive actions are done. Renewable energies are arising as promising technologies that will complement and even replace conventional fuels shifting the global energy matrix to a cleaner and eco-friendly future. Microalgal biohydrogen is one of those emerging technologies that is showing positive results. This work provides an overview of the key parameters to produce hydrogen from microalgae especially from the genus Chlorella. Current status of chemical and biological hydrogen producing technologies is presented, along with the main metabolic processes for this purpose in microalgae, their characteristic enzymes, several strategies to induce hydrogen production, the key operation parameters and finally providing some remarks about scaling-up and industrial-scale applications.     

Comparative techno-economic study of typically combustion-less hydrogen production alternatives

A techno-economic study is performed for a large scale combustion-less hydrogen production process based on Steam Methane Reforming (SMR). Two process versions relying on different renewable heat sources are compared: (1) direct solar heating from a concentrated solar power system, and (2) radiation from resistive electrical heaters (electric SMR). Both processes are developed around an integrated micro-reactor technology, incorporating in a monolithic block most sub-processes needed to perform SMR. A baseline techno-economic scenario with low-cost feedstock and electricity, priced at $4/MMBtu and $0.04/kWh respectively, results in an LCOH of $2.31/kg_H2 for solar SMR and $1.59/kg_H2 for electric SMR. Results further show that solar SMR is currently more attractive economically than electric SMR coupled with distributed wind power systems, but electric SMR is more favourable in the long term due to the expected future improvements in the LCOE and capacity factor of wind power systems.     

Effect of manifold injection of hydrogen gas in producer gas and neem biodiesel fueled CRDI dual fuel engine

The high flammability of hydrogen gas gives it a steady flow without throttling in engines while operating. Such engines also include different induction/injection methods. Hydrogen fuels are encouraging fuel for applications of diesel engines in dual fuel mode operation. Engines operating with dual fuel can replace pilot injection of liquid fuel with gaseous fuels, significantly being eco-friendly. Lower particulate matter (PM) and nitrogen oxides (NO_x) emissions are the significant advantages of operating with dual fuel.Consequently, fuels used in the present work are renewable and can generate power for different applications. Hydrogen being gaseous fuel acts as an alternative and shows fascinating use along with diesel to operate the engines with lower emissions. Such engines can also be operated either by injection or induction on compression of gaseous fuels for combustion by initiating with the pilot amount of biodiesel. Present work highlights the experimental investigation conducted on dual fuel mode operation of diesel engine using Neem Oil Methyl Ester (NeOME) and producer gas with enriched hydrogen gas combination. Experiments were performed at four different manifold hydrogen gas injection timings of TDC, 5°aTDC, 10°aTDC and 15°aTDC and three injection durations of 30°CA, 60°CA, and 90°CA. Compared to baseline operation, improvement in engine performance was evaluated in combustion and its emission characteristics. Current experimental investigations revealed that the 10°aTDC hydrogen manifold injection with 60°CA injection duration showed better performance. The BTE of diesel + PG and NeOME + PG operation was found to be 28% and 23%, respectively, and the emissions level were reduced to 25.4%, 14.6%, 54.6%, and 26.8% for CO, HC, smoke, and NO_x, respectively.