Effect of Monomer Feeding Mode on thePreparation of Hollow Latexes with High MAA Content in the Core Latex Preparation简

In order to prepare hollow latex particles with optimum morphology based on osmotic swelling principle, three- layer core/shell latex particles with 40 wt% MAA in the core were first prepared via multistep seeded emulsion copolymerization, in which monomers were added by a semi-continuous process with monomer addition under two different forms： pure monomers＇ mixture （monomer addition）, and pre-emulsified monomers （pre-emulsion addition）. Then, the hollow latex particles with different morphologies were obtained after alkali post-treatment. Influences of the monomer feeding mode on the emulsion polymerization and the particle morphology were investigated. Results showed that the pre- emulsion addition could significantly improve the polymerization stability in each step, and greatly enhance the uniformity of shell encapsulation. The sizes of the core and core/shell latex particles obtained by the pre-emulsion addition were smaller and more uniform than those synthesized by the monomer addition, and the hollow latex particles with intact morphology were generated by alkali post-treating of the core/shell latexes prepared from the pre-emulsion addition. As the core size increased, the morphology of the post-treated particles underwent evolution from hollow to collapse. Moreover, the mechanism of the particle morphological evolution was proposed.     

Morphology and Phase Composition ofGelatin-Starch Blends简

Morphology and phase compositions of different starch-gelatin blends were investigated by various microscopes: optical, SEM and synchrotron FTIR microscopy. A high amylose(80%) corn starch, grafted with hydroxypropyl to enhance flexibilty and hydrophilicity, and plasticized by poly(ethylene glycol)(PEG), was used in this work. SEM revealed that the surface became smoother after adding PEG. Optical microscopy observation revealed that compatibility between gelatin and starch was improved by adding PEG. An FTIR beam focused on a 5 μm× 5 μm detection area by the micro-spectroscope was used to map chemical composition. The ratio of areas of the saccharide bands(1180–953 cm 1) and the amide I and II bands(1750–1483 cm 1) was used to monitor the relative distributions of the two components in the blends. The FTIR maps indicated that gelatin constituted the continuous phase up to 80% of starch content. All of the FTIR spectra showed contributions from both starch and gelatin absorptions, therefore indicating that complete demixing with pure starch and gelatin domains did not occur. The PEG improved the compatibility of the gelatin-starch blends.     

Effect of Molecular Structure on the GasPermeability of Cellulose Aliphatate Esters简

In this work, four kinds of cellulose aliphatate esters, cellulose acetate （CA）, cellulose propionate （CP）, cellulose butyrate （CB） and cellulose acetate butyrate （CAB） are synthesized by the homogeneous acylation reactions in cellulose/AmimC1 solutions. These cellulose aliphatate esters are used to prepare gas separation membranes and the effects of molecular structure, such as substituent type, degree of substitution （DS） and distribution of substituents, on the gas permeability are studied. For CAs, as the DS increases, their gas permeabilities for all five gases （02, N2, CH4, CO and CO2） increase, and the ideal permselectivity significantly increases first and then slightly decreases. At similar DS value, the homogenously synthesized CA （distribution order of acetate substituent： C6 〉 C3 〉 C2） is superior to the heterogeneously synthesized CA （distribution order of acetate substituent： C3 〉 C2 〉 C6） in gas separation. With the increase of chain length of aliphatate substituents from acetate to propionate, and to butyrate, the gas permeability of cellulose aliphatate esters gradually increases. The cellulose mixed ester CAB with short acetate groups and relatively long butyrate groups exhibits higher gas permeability or better permselectivity than individual CA or CB via the alteration of the DS of two substituents.     

Electrochemical DNA nano-biosensor for the detection of genotoxins in water samples简

In the present study, a disposable electrochemical DNA nano-biosensor is proposed for the rapid detection of genotoxic compounds and bio-analysis of water pollution. The DNA nano-biosensor is prepared by immobilizing DNA on Au nanoparticles and a self-assembled monolayer of cysteamine modified Au electrode. The assembly processes of cysteamine, Au nanoparticles and DNA were characterized by cyclic voltammetry （CV）. The Au nanoparticles enhanced DNA immobilization resulting in an increased guanine signal. The interaction of the analyte with the immobilized DNA was measured through the variation of the electrochemical signal of guanine by square wave voltammetry （SWV）. The biosensor was able to detect the known genotoxic compounds： 2-anthramine, acridine orange and 2- naphthylamine with detection limits of 2, 3 and 50 nmol/L, respectively. The biosensor was also used to test actual water samples to evaluate the contamination level. Additionally, the comparison of results from the classical genotoxiciw bioassay has confirmed the applicability of the method for real samoles.     

Size Effects on the Luminescence Properties of Polymer Nanowires简

Poly（3-（2-methoxyphenyl）thiophene） （PMP-Th） nanowires were fabricated using porous anodic alumina （PAA） as template through electrochemical polymerization by cyclic voltammetry. The control on the size of nanowires was confirmed by electron microscopy. The results indicated that the luminescence spectra of PMP-Th nanowires in PAA nanochannels were blue-shifted and emission intensity was enhanced compared to the emission of the PMP-Th film. Moreover, the luminescent spectra of PMP-Th nanowires were size dependent, which may result from the change in the degree of confinement of nanowires in PAA. F6rster energy transfer from PAA to PMP-Th molecules is considered to be responsible for the enhancement of luminescence from PMP-Th nanowires in PAA. The results show that the emission properties of polymers with nanostructures can be tuned by controlling their size.     

The Influence of Bridge Type on the Activity of Supported Metallocene Catalysts in Ethylene Polymerization简

Ethylene polymerization was carried out by immobilization of rac-ethylenebis(1-indenyl)zirconium dichloride(Et(Ind)2 ZrCl2) and rac-dimethylsilylbis(1-indenyl)zirconium dichloride(Me2 Si(Ind)2 ZrCl2) preactivated with methylaluminoxane(MAO) on calcinated silica at different temperatures. Polymerizations of ethylene were conducted at different temperatures to find the optimized polymerization temperature for maximum activity of the catalyst. The Me2 Si bridge catalyst showed higher activity at the lower polymerization temperature compared to the Et bridge catalyst. The highest catalytic activities were obtained at temperatures about 50 °C and 70 °C for Me2 Si(Ind)2 ZrCl2 /MAO and Et(Ind)2 ZrCl2 /MAO catalysts systems, respectively. Inductively coupled plasma-atomic emission spectroscopy results and polymerization activity results confirmed that the best temperature for calcinating silica was about 450 °C for both catalysts systems. The melting points of the produced polyethylene were about 130 °C, which could be attributed to the linear structure of HDPE.     

High Photocatalytic Properties of Zinc OxideNanoparticles with Amidoximated BacterialCellulose Nanofibers as Templates简

The freshly prepared water-wet amidoximated bacterial cellulose （Am-BC） serves as an effective nanoreactor to synthesis zinc oxide nanoparticles by in situ polyol method. The obtained ZnO/Am-BC nanocomposites have been characterized by field emission scanning electron microscopy （FE-SEM）, X-ray diffraction （XRD）, Fourier transformed infrared spectroscopy （FTIR） and thermogravimetric analysis （TGA）. The influence of the zinc acetate concentration on the morphologies and size ofZnO nanoparticles and the possible formation mechanism were discussed. The results indicated that uniform ZnO nanoparticles were homogeneously anchored on the Am-BC nanofibers through strong interaction between the hydroxyl and amino groups of Am-BC and ZnO nanoparticles. The loading content of ZnO nanoparticles is higher using Am-BC as a template than using the unmodified bacterial cellulose. The resultant nanocomposite synthesized at 0.05 wt% shows a high photocatalytic activity （92%） in the degradation of methyl orange.     

In situ polymerization of aniline in electrospun microfbers简

Conductive microfibers with an average diameter of ca. 1.0 mm were prepared by in situ polymerization of aniline, in which poly(vinylchloride-acrylonitrile)(PVC-AN) was used as the filament-material in electrospinning to form precursor microfibers and carry the aniline monomers. Fourier-transform infrared(FTIR) results demonstrated that PANi was successfully polymerized in the microfibers. The morphology of the PVC-AN-PANi microfibers was observed by scanning electron microscopy(SEM). Results of differential scanning calorimetry indicated that the polymer composite of PVC-AN-PANi formed via molecular interactions. Although the conductivity of PVC-AN-PANi microfibers was still limited(2.2 fi 10à8S/cm), this method provided an effective and convenient approach for preparing highly uniform and soft microfibrous electrodes.     

The novel usage of thiourea nitrate in aryl nitration简

Thiourea nitrate （TN） was easily prepared from thiourea and nitric acid to explore its use as a new nitration reagent, Nitrations of various aromatic compounds utilizing TN in concentrated sulfuric acid were studied, TN could convert aromatic compounds to the corresponding nitrated derivatives with various abnormal yields under mild conditions. The results suggested that the reaction mechanism might be different from those of traditional nitration reagents.     

A novel fluorescent detection for PDGF-BB based on dsDNA-templated copper nanoparticles简

A novel method for the detection of PDGF-BB has been developed using double-strand DNA-copper nanoparticles （dsDNA-CuNPs） as fluorescent markers. This assay relies on the premise that the aptamer- based probe undergoes a conformational change upon binding with target protein, and subsequently triggers polymerization reaction to generate dsDNA. Then, the resultant dsDNA can be used as a template for the formation of CuNPs with high fluorescence. Under the optimized conditions, the proposed assay allowed sensitive and selective detection of PDGF-BB with a detection limit of 4 nmol/L. This possibly makes it an attractive platform for the detection of a variety of biomolecules whose aptamers undergo similar conformational change.     

A novel approach to prepare core/shell polymer latex particles with high sulphonate contents

Crosslinked x-P(St-MAA) seed latex was first prepared via soap-free emulsion copolymerization of styrene (St) and methyl methacrylic acid (MAA) with divinyl benzene as crosslinker and ammonium persulfate as initiator, and x-P(St-MAA)/x-P(St-NaSS) core/shell latex particles were then synthesized through a novel seeded emulsion copolymerization of St and sodium styrene sulphonate (NaSS) in the presence of water-soluble crosslinker N,N′-methylene bisacrylamide (BAA) using oil-soluble 2,2-azobis isobutyronitrile as initiator. TEM observation indicated that narrow dispersed core/shell latex particles were obtained, and element analysis showed that NaSS unit content in the whole particle and in the shell reached 22.8 wt% and 51.2 wt%, respectively.     

The formation mechanism of poly(vinyl acetate)/poly(butyl acrylate) core/shell latex in two-stage seeded semi-continuous starved emulsion polymerization process

In this paper, the morphological evolution of latex particles on poly(vinyl acetate) (PVAc)/poly(butyl acrylate) (PBA) in two-stage seeded semi-continuous starved emulsion polymerization is studied, and the thermodynamic analysis and a mathematic model are derived to describe the interfacial free energy changes corresponding to various possible thermodynamically unstable morphologies during the polymerization process. The comparisons between the morphological evolution and the related thermodynamic analysis show that the morphological evolution of latex particles is oriented to the thermodynamic preferred morphology which is an inverted core/shell structure with PBA as core and PVAc as shell. Based on the comparisons, the possible morphological developmental pathway of PVAc/PBA core/shell latex is described. The possible morphological developmental pathway suggests that the observed multi-particle morphology in the polymerization process is due to restricted chain mobility related to high internal viscosity. The formation mechanism of PVAc/PBA core/shell latex, based on the experiments as well as the thermodynamic and dynamic analyses, is proposed, which signifies that PBA is first formed outside the PVAc seed and then migrate to the inside of the PVAc seed.     

Synthesis and properties of organo-fly ash/polyaniline with core/shell structure based on emulsion polymerization

Organo-fly ash(OFA) was prepared with pretreated fly ash(FA) and hexadecyltrimethyl ammonium bromide (HDTMAB),and the composites composed of OFA and polyaniline were obtained by emulsion polymerization at different OFA weight ratios(2.0 wt%,5.0 wt%,10.0 wt%,15.0 wt%and 20.0 wt%) in the presence of dodecylbenzenesulfonic acid as dopant and emulsifier.A polymerization procedure was supposed.The electrical conductivities of the composites were tested by the four-probe technique.The chemical structure and crystallinity of the composites were confirmed by FT-IR and X-ray diffraction,respectively.Morphologies of FA,OFA and the composites were observed by SEM.The element analysis was performed by energy dispersive spectrometry.The thermal stability of the composites was analyzed by TGA.The results showed that the electrical conductivity of the composites decreased with increasing the feed weight ratio of OFA,and the lowest value was 0.62 S/cm.HDTMAB and PAn were just adsorbed on the surface of FA and OFA,respectively according to the physical adsorption without destroying the crystalline structure of FA or OFA.The surface became smoother after organification of FA by using HDTMAB,and its content on FA surfaces was about 26.9 wt%.The core/shell structure of the composite was observed by SEM analysis.The composites showed a higher thermal stability than pure PAn by introduction of OFA into this polymerization system,the heat stability of PAn was increased by decreasing 31.8 wt%of weight loss after introducing 20 wt%of OFA.     

Production of electrically conductive, core/shell polystyrene/polyaniline composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized, monodispersed, electrically conductive polystyrene (PS)/polyaniline (PAn) composite particles were produced by chemical oxidative seeded dispersion polymerization of aniline at 0 °C with 1.37-μm-sized, monodispersed PS seed particles in HCl aqueous solution, where the pH value was kept at 2.5 with a pH stat. The composite particles consisted of a PS core and a PAn shell. A pellet of the composite particles had a conductivity of 3.4 × 10⁻³ S/cm. Received: 5 April 2000 Accepted: 10 August 2000     

Preparation and characterization of micron-sized polystyrene/polysiloxane core/shell particles

A procedure has been developed to coat micron-sized polystyrene (PS) spheres with a smooth layer of polysiloxane by a sol–gel process of methyl trimethoxylsilane (MTMS) without using silane coupling agents. The thickness of the shells can be easily varied with different polystyrene seeds and methyl trimethoxysilane feed ratio. When we used PS particles with diameters of 2.09 μm prepared by conventional dispersion polymerization as seeds, the thickness of the polysiloxane shells can be varied from 0.11 to 0.21 μm. The particle size, size distribution, thermal decomposition, and solvent resistance were investigated by scanning electron microscope (SEM), transmission electron microscope (TEM), size analyzer, and TG, respectively.     

Production of core/shell polystyrene/poly(3,5-xylidine) composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized monodispersed polystyrene (PS)/poly(3,5-xylidine) (PXy) composite particles were produced by chemical oxidative seeded dispersion polymerization of 3,5-xylidine at 20 °C with 1.6-μm-sized monodispersed PS seed particles in HCl aqueous solution, the pH of which was always kept at 2.5 with a pH stat. The composite particles produced consisted of a PS core and a PXy shell. Received: 16 December 1998 Accepted in revised form: 25 March 1999     

Preparation and characterization of core-shell polystyrene/polychloromethylstyrene and hollow polychloromethylstyrene micrometer-sized particles of narrow-size distribution

Polystyrene core microspheres of narrow-size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2-methoxy ethanol. Polystyrene/polychloromethylstyrene and polystyrene/poly(chloromethylstyrene-divinylbenzene) core-shell microspheres of narrow-size distribution were prepared by seeded emulsion polymerization of chloromethylstyrene or chloromethylstyrene and divinylbenzene in the presence of the polystyrene core microspheres at 71 °C. Core-shell particles with different properties (size, surface morphology, and composition) have been prepared by changing various parameters belonging to the emulsion polymerization process, e.g., volume of the chloromethylstyrene and the volume ratio of chloromethylstyrene to divinylbenzene. Dissolution of the polystyrene core of the polystyrene/poly(chloromethylstyrene-divinylbenzene) core-shell particles resulted in the formation of crosslinked hollow polychloromethylstyrene microspheres, broken crosslinked polychloromethylstyrene shells, or particles containing voids, depending on the composition of the polystyrene/poly(chloromethylstyrene-divinylbenzene) particles.     

Effect of polymer composition on the production of cationic multihollow polymer particles by the stepwise acid/alkali method

The effect of the polymer composition on the formation of multihollow structures formed within submicron-sized styrene–butyl acrylate–dimethylaminoethyl methacrylate terpolymer particles by the “acid/alkali method” proposed by the authors was examined. The cationic particles were produced by seeded emulsion terpolymerization with 2,2′-azobis(2-amidinopropane) hydrochloride initiator. The dimethylaminoethyl methacrylate content and the glass-transition temperature of the terpolymer greatly affected the formation of the multihollow structure. Received: 3 December 1998 Accepted in revised form: 4 February 1999     

Highly Stable CdSe/CdS/ZnS Fluorophores in Acidic Environment: Acile Preparation and Modification of Core/shell/shell Nanocrystals

We described a facile method for preparing CdSe/CdS/ZnS core/shell/shell nanocrystals from air-stable single source precursors.The single source precursors of cadmium ethylxanthate and zinc ethylxanthate were used to form CdS and ZnS shell layers in octadecene.An efficient modification of CdSe/CdS/ZnS nanocrystals was subsequently performed to obtain hydrophilic nanocrystal fluorophores with good stability in a pH range of 1.6-10.