A new instrument adapted to in situ Raman analysis of objects of art

The analysis of precious artefacts and antiquities demands care in order to minimise the risk of accidental damage during measurement. Mobile fibre-optic-based Raman instruments offer a means to avoid destructive sampling and eliminate the need to transport artefacts for spectrochemical analysis. In this work we present a new mobile instrument developed and optimised for the in situ Raman investigation of objects of art and antiquities. The instrument is controlled by a portable computer. Selected mounts cover many types of artefacts. Newly written software routines organise spectra together with measurement parameters and facilitate calibration of the instrument. The present paper describes this new Raman instrument and discusses some challenges in the transition from a laboratory environment to in situ investigations in museums.     

Fourier transform infrared spectroscopy and the analytical study of works of art for purposes of diagnosis and conservation

This paper is a study of the analytical capacity of Fourier transform infrared spectroscopy (FT-IR) for any type of samples from works of art. The analytical information obtained with this technique on organic and inorganic compounds is extremely useful in the preliminary studies necessary for diagnosis and to decide on the conservation process. This paper reports the analysis and study with FT-IR on samples extracted from the microlayers in several works of art from different periods (16th to 18th century) comprising wall paintings and canvas. The most outstanding of these being the frescoes by A. Palomino from two ceilings in the Santos Juanes church. The analytical procedures for the different components of the works studied such as

1. (a) varnish applied to wood panels and canvas paintings,

2. (b) binding media and pigments used by the artists,

3. (c) inerts, mortars, stuccos and grounds have been optimized. The FT-IR technique offers a quick analysis of microsamples (less than 0.5 mg) and is able to characterise the different molecular groups which provide information on the nature of the different materials of organic and inorganic origin used by the artist and thus permits the diagnosis of pathologies requiring conservation treatment.

Cure kinetics of epoxy-amine resins used in the restoration of works of art from glass or ceramic

The cure kinetics of two epoxy/amine resins, Araldite 2020 and AY103-HY956 widely used as adhesives in the restoration of works of art from glass or ceramic was investigated using FTIR spectroscopy. These resins are two-part adhesives, consisting of a resin - A, based on a diglycidyl ether of bisphenol A, and a hardener - B which is either a cycloaliphatic amine (isophorone diamine) for Araldite 2020, or a mixture of three aliphatic amines in HY956. The study was based on the collection of IR spectra, in the middle range (4000-600 cm⁻¹), of mixtures of resin and hardener at different proportions and isothermal temperatures (22-70 °C) as a function of curing time. A kinetic model was employed to simulate the experimental data using two kinetic rate constants. Diffusion control was incorporated to describe the cure behaviour at high degrees of conversion. From fitting to experimental data the kinetic and diffusional parameters were estimated, together with the activation energies of the kinetic and autocatalytic rate constants. It was found that higher degrees of curing are obtained at higher temperatures and increased amounts of hardener. Differences in the performance of the two adhesives are explained based on the type of the amines used as hardener.     

Identification of proteins,drying oils,waxes and resins in the works of art micro‐samples by chromatographic and mass spectrometric techniques

Simplified method for simultaneous identification of proteins, drying oils, waxes, and resins in the works‐of‐art samples was developed. Liquid chromatography with mass spectrometry and gas chromatography with mass spectrometry were used to identify natural materials most frequently encountered in historical paintings. Protein binders were extracted with ammonia and purified using miniaturized solid‐phase microextraction (Omix tips) to efficiently suppress matrix interferences. Zwitterionic stationary phase was used for separation of 16 underivatized amino acids analysis with hydrophilic interaction liquid chromatography that was subsequently quantified with liquid chromatography with mass spectrometry. Gas chromatography with mass spectrometry was used to analyze drying oils, waxes, and resins after one‐step saponification/transmethylation with (m‐trifluoromethylphenyl)trimethylammonium hydroxide (Meth‐Prep II). While the drawback of this reagent is low reactivity towards hydroxyl groups, sample pretreatment was much simpler as compared to the other methods. Fatty acids derivatization with the Meth‐Prep II reagent was compared with their silylation using N,O‐bis(trimethylsilyl) trifluoroacetamide/trimethylchlorosilane mixture. It was concluded that fatty acids analysis as their methyl esters instead of trimethylsilyl esters had a minor impact on the method sensitivity. The developed method was used to analyze samples from 16^th and 17^th century historical paintings.     

A review of multivariate calibration methods applied to biomedical analysis

The determination of the contents of therapeutic drugs, metabolites and other important biomedical analytes in biological samples is usually performed by using high-performance liquid chromatography (HPLC). Modern multivariate calibration methods constitute an attractive alternative, even when they are applied to intrinsically unselective spectroscopic or electrochemical signals. First-order (i.e., vectorized) data are conveniently analyzed with classical chemometric tools such as partial least-squares (PLS). Certain analytical problems require more sophisticated models, such as artificial neural networks (ANNs), which are especially able to cope with non-linearities in the data structure. Finally, models based on the acquisition and processing of second- or higher-order data (i.e., matrices or higher dimensional data arrays) present the phenomenon known as “second-order advantage”, which permits quantitation of calibrated analytes in the presence of interferents. The latter models show immense potentialities in the field of biomedical analysis. Pertinent literature examples are reviewed.     

Spatially resolved mass spectrometry in the study of art and archaeological objects

Spatially resolved mass spectrometry (MS) is a widespread technique increasingly used in many areas of research. Operating in a fast, straightforward way with minimal sample damage, MS investigation can provide spatially resolved information with low limits of detection and a wide linear range. For these reasons, spatially resolved MS is applied in the study of art and archaeological objects, and the current review provides a survey of relevant publications. We highlight the main capabilities and the limitations of spatially resolved MS and discuss the most relevant applications.     

Chromatographic methods applied in the monitoring of biodesulfurization processes - State of the art

Analytical methodologies employed in biodesulfurization processes have been reviewed; attention is primarily focused on the use of analytical techniques in the identification of degradation products and on the monitoring of degradation processes in which microbial sulphur-specific transformations take place. This is the first review of analytical techniques applied to biodesulfurization processes. Methodologies based on gas chromatography (GC) are the most frequently employed, in tandem with various detectors, mainly with the mass spectrometry (MS) detector, and the flame ionization detector (FID). High performance liquid chromatography (HPLC) coupled with ultra violet (UV) detection has also been widely employed. Different sulphurated compounds are used as model in biodesulphurization processes, naphtothiophene (NTH), benzothiophene (BTH), alkilated BTH, dibenzothiophene (DBT), alkilated DBT and their transformation products has been reviewed. DBT is the most frequently employed.     

Ensemble methods and data augmentation by noise addition applied to the analysis of spectroscopic data

Near-infrared spectroscopy has gained great acceptance in the industry due to its multiple applications and versatility. Sometimes, however, the construction of accurate and robust calibration models involves the collection of a large number of samples with related reference analysis that can complicate and prolong the calibration stage.In this paper, ensemble methods and data augmentation by noise simulation have been applied to spectroscopic data in combination with PLSR to obtain robust models able to handle different types of perturbations likely to affect NIR data. Several types of noise have been investigated as well as different ensemble methods focused on obtaining robust PLS models able to predict both the original and the perturbed test data.The suitability of ensemble methods to perform robust calibration models has been investigated and compared to extended multiplicative signal correction (EMSC) and other calibration approaches in a real case of temperature compensation. Extended multiplicative signal correction (EMSC) and ensemble methods seem to be the most appropriate methods yielding the best results in terms of accuracy and prediction ability with a reduced calibration data set.     

Identification of indigoid dyes in natural organic pigments used in historical art objects by high-performance liquid chromatography coupled to electrospray ionization mass spectrometry

Pigments are among the most important components of historical paintings and textiles and their nature provides the unique character of color. They can be divided into two main groups: inorganic and organic, extracted from plants or animals. Their identification is a necessary stage in the conservation of art objects. Reversed-phase liquid chromatography with electrospray ionization mass spectrometry (ESI-MS) and UV/visible spectrophotometric methods were elaborated for the identification of indigoid (indigo, indirubin, isoindigo, isoindirubin) color components of natural dyestuffs and their natural or synthetic precursors (indican, isatin, indoxyl, 2-indolinone). ES-MS offers detection limits in the range 0.03-5.00 microg ml(-1) for the color compounds examined. The method developed made it possible to identify indigo and its isomers in genuine Indian indigo, indigo from woad and Tyrian Purple. It was applied to the identification of natural dyes on fiber from a 19th century Japanese tapestry, 'Cranes in the landscape'. A procedure based on freezing and grinding of a sample before the extraction of dyes from the textile was developed. The components of the extract obtained were identified after acidic hydrolysis as indigotin and methylene blue.     

用于环己烷氧化混合产物的分析方法

针对环己烷空气液相氧化混合产物的不同特性，采用了不同的测定方法：环己基过氧化氢采用间接碘量法定量；酸和酯采用酸碱滴定法定量；环己醇和环己酮等有机物采用气相色谱法，但进样前先加入三苯基膦以避免环己基过氧化氢的干扰。该方法回收率为96．62％～101．69％，相对标准偏差为1．12％～5．09％。     

Comparative analysis of the applicability of AM1 and CNDO/2 methods for quantitative prediction of the35Cl NQR frequencies of RC-Cl compounds

The³⁵Cl NQR frequencies of a series of RC-Cl compounds were calculated by the AM1 and CNDO/2 methods in the Townes-Dailey approximation. It was shown that neither of these methods can be directly used for the quantitative prediction of NQR frequencies, and their use in the correlation approach is only possible in narrow series. The AM1 method gives better results for saturated compounds.Institute of Organic and Physical Chemistry, Kazan' Scientific Center, Russian Academy of Sciences, 420083 Kazan'. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 5, pp. 1078–1082, May, 1992.     

The performance of explicitly correlated methods for the computation of anharmonic vibrational frequencies

Anharmonic vibrational frequencies for closed-shell molecules computed with CCSD(T)-F12b/aug-cc-pVTZ differ from significantly more costly composite energy methods by a mean absolute error (MAE) of 7.5 cm⁻¹ per fundamental frequency. Comparison to a few available gas phase experimental modes, however, actually lowers the MAE to 6.0 cm⁻¹. Open-shell molecules have an MAE of nearly a factor of six greater. Hence, open-shell molecular anharmonic frequencies cannot be as well-described with only explicitly correlated coupled cluster theory as their closed-shell brethren. As a result, the use of quartic force fields and vibrational perturbation theory can be opened to molecules with six or more atoms, whereas previously such computations were limited to molecules of five or fewer atoms. This will certainly assist in studies of more chemically interesting species, especially for atmospheric and interstellar infrared spectroscopic characterization.     

Magnetic microsphere-based methods to study the interaction of teicoplanin with peptides and bacteria

Teicoplanin (teic) from Actinoplanes teichomyceticus is a glycopeptide antibiotic used to treat many Gram-positive bacterial infections. Glycopeptide antibiotics inhibit bacterial growth by binding to carboxy-terminal d-Ala-d-Ala intermediates in the peptidoglycan of the cell wall of Gram-positive bacteria. In this paper we report the derivatization of magnetic microspheres with teic (teic-microspheres). Fluorescence-based techniques have been developed to analyze the binding properties of the microspheres to two d-Ala-d-Ala terminus peptides. The dissociation constant for the binding of carboxyfluorescein-labeled d-Ala-d-Ala-d-Ala to teic on microspheres was established via fluorimetry and flow cytometry and was determined to be 0.5 × 10⁻⁶ and 3.0 × 10⁻⁶ mol L⁻¹, respectively. The feasibility of utilizing microparticles with fluorescence methods to detect low levels (the limit of bacterial detection was determined to be 30 colon-forming units; cfu) of Gram-positive bacteria has been demonstrated. A simple microfluidic experiment is reported to demonstrate the possibility of developing microsphere-based affinity assays to study peptide–antibiotic interaction.     

Critical study of the isoconversional methods of kinetic analysis

A critical study of the use of isoconversional methods for the kinetic analysis of non-isothermal data corresponding to processes with either a real or an apparent variation of the activation energy, E, with the reacted fraction, α, has been carried out using for the first time simulated curves. It has been shown that the activation energies obtained from model-free methods are independent of the heating rate. However, the activation energy shows a very strong dependence of the range of heating rates used for simulating the curves if the apparent change of E with α is caused by overlapping processes with different individual activation energies. This criterion perhaps could be used for determining if a real dependence between E and α is really occurring.     

Comparison between different data pre-treatment methods in the analysis of forage samples using near-infrared diffuse reflectance spectroscopy and partial least-squares multivariate calibration method

Moisture and protein content of alfalfa samples from Catalonia (Spain) have been analyzed by near-infrared (NIR) diffuse reflectance spectroscopy and multivariate calibration methods. In order to remove systematic variation in experimental data, such as base-line and multiplicative scatter effects, the evaluation of different data pre-processing methods is performed. Different figures of merit are used for quality assessment and comparison of these pre-treatment methods.     

Structure determinations of nitrogen compounds with the aid of NQR, NMR, and ESCA spectroscopy

Since it is often necessary or desirable to determine the structures of compounds containing nitrogen directly via the nitrogen atoms, the nuclear quadrupole resonance (NQR) and the nuclear magnetic resonance (NMR) as well as the photoelectron and the Auger-electron spectroscopy (ESCA) of nitrogen are becoming increasingly important. A comparative review of these three methods on the basis of measurement effect, information obtainable, applications, and limitations forms the subject of this article.     

Capillary electrophoretic methods applied to the investigation of peptide complexes

This article gives an overview of the applications of capillary electrophoretic methods to investigate the non‐covalent interactions of peptides (peptide complexes) with variable middle‐ and high‐molecular‐mass receptors (ligands) as well as with small ions and molecules in the period 2007–2014. Different modes of capillary electrophoretic methods, such as mobility shift (vacancy) affinity capillary electrophoresis, multiple injection affinity capillary electrophoresis, partial filling affinity capillary electrophoresis, Hummel–Dryer method, vacancy peak method and (continuous) frontal analysis capillary electrophoresis, are briefly described and their applicability to determination of binding constants of peptide complexes is discussed. In addition, the detailed experimental conditions of individual applications and the values of binding constants of the particular peptide complexes are presented.