表面活性剂对共轭聚合物荧光性质及电荷转移的影响

探讨了表面活性剂存在下, 水溶性阴离子共轭聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](简写为MPS-PPV)的微环境变化对荧光性质及电荷转移的影响. 结果表明, 阳离子表面活性剂及非离子表面活性剂使MPS-PPV荧光增强, 阴离子表面活性剂使其荧光先增强后减弱; 在MPS-PPV/表面活性剂体系中加入电子接受体Pd^2＋, 发现非离子表面活性剂体系的荧光猝灭效率提高, 阴离子及阳离子表面活性剂体系荧光猝灭效率下降. 此研究对研制基于阴离子共聚物的新型生物化学传感器具有一定的指导意义.     

9,10⁃二(N⁃苯基吲哚⁃3⁃乙烯基)蒽的合成及聚集诱导荧光和压致荧光变色性质

通过简单的Wittig反应合成了一个荧光化合物9,10-二(N-苯基吲哚-3-乙烯基)蒽(IA-Ph); 通过核磁共振和质谱对其结构进行了确认; 利用荧光发射光谱和紫外吸收光谱对其光物理性质进行了表征. 结果表明, 化合物IA-Ph兼具聚集诱导荧光(AIE)和压致荧光变色性质, 在相同浓度下, 该化合物在THF/H₂O(体积比1∶9)混合溶液中的荧光强度比在纯四氢呋喃(THF)溶液中增加了12倍, 具有明显的AIE效应. 通过简单而有效的机械力研磨, 化合物可以从初始的发绿光转变为研磨后的橙红光, 光谱红移约68 nm; 而且在加热或溶剂熏蒸条件下, 化合物的颜色可以回复到起始的绿光, 具有完全可逆性.     

表面活性剂对共轭聚合物荧光性质及电荷转移的影响

探讨了表面活性剂存在下, 水溶性阴离子共轭聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](简写为MPS-PPV)的微环境变化对荧光性质及电荷转移的影响. 结果表明, 阳离子表面活性剂及非离子表面活性剂使MPS-PPV荧光增强, 阴离子表面活性剂使其荧光先增强后减弱; 在MPS-PPV/表面活性剂体系中加入电子接受体Pd^2＋, 发现非离子表面活性剂体系的荧光猝灭效率提高, 阴离子及阳离子表面活性剂体系荧光猝灭效率下降. 此研究对研制基于阴离子共聚物的新型生物化学传感器具有一定的指导意义.     

含双呋喃共轭桥的有机非线性生色团的合成及性能

通过Wittig反应和Vilsmeier反应合成了一种以双呋喃为共轭桥, 2,2,3-三甲基-4-氰基-5-二氰基亚甲基-2,5-二氢呋喃(TCF)为受体, 并以二甲胺基为给体的有机非线性生色团分子MF₃C, 利用红外光谱、 ¹H NMR和元素分析对其结构进行了表征. 热重分析结果表明, 该分子的热分解温度达228℃; 利用溶致变色法对该生色团分子的二阶非线性品质参数μ_gβ进行了计算, 在1064 nm波长下MF₃C的μ_gβ值达到5.9×10^-44 esu. 可见, 该生色团兼具较好的热稳定性和较大的超极化率.     

醇对水中DDAHPS分子聚集行为的影响

分别用稳态荧光猝灭技术和时间分辨荧光方法研究醇对两性表面活性剂 (十二烷基羟基磺化甜菜碱 ,DDAHPS)在水中聚集行为的影响 .结果表明 :在 4.0 0× 1 0 - 2 mol·L- 1DDAHPS水溶液中 ,随着正丁醇浓度的逐渐增大 ,表面活性剂的聚集数 (N)逐渐降低 .恒定醇的浓度为 2 .1 4× 1 0 - 2mol·L- 1时 ,醇碳链越长 ,N值越大 .与无醇体系相比 ,正丙醇和正丁醇使N值变小 ,正戊醇、正己醇和正庚醇使N值变大 .本文同时还测定了醇对微环境的极性 ,芘的荧光寿命及胶束内芘的激基缔合物形成效率的影响 .     

含不同烷基链四苯基丁二烯衍生物的聚集诱导发光及力致变色性能

设计合成了带有不同长度烷基链、不同极性取代基的四苯基丁二烯(TPB)衍生物TPB-COOCH₃-1~6和TPB-COOH-1~6, 目标化合物均具有显著的聚集诱导发光(AIE)特性及较高的固态荧光量子效率. 烷基链长及取代基极性都会影响目标化合物在聚集时分子排列及分子运动的受限程度, 从而调控其AIE行为. 带有羧酸甲酯的TPB-COOCH₃-1~6中, 丙基取代的TPB-COOCH₃-3在四氢呋喃/水(THF/H₂O)体系中荧光发射增强最为显著; 而羧基取代的TPB-COOH-1~6中, 因亲水性增加, 己基取代的TPB-COOH-6荧光强度增加的倍数最大; 并且, TPB-COOH系列化合物荧光增强的倍数明显低于相同烷基取代的甲酯衍生物TPB-COOCH₃. 此外, 牛血清白蛋白、人血清白蛋白和带有羧基的AIE化合物掺杂时明显影响其固态时的发光及其力致变色性质, 尤其是研磨后会明显提高其荧光强度.     

可溶液加工的D-A-D型有机小分子的烷基链效应及光电性能

设计合成了3种可溶液加工的基于噻吩给体和2-吡喃-4-亚基丙二氰(PM)受体的新型Donor-Acceptor-Donor(D-A-D)型有机小分子TPT-N, TPT-S和TPT-D. 研究了噻吩给体单元上烷基链的数目对分子的溶解性、 光物理(吸收特性)、 热稳定和光电性能的影响. 结果表明, 随着烷基链的增加, 分子的溶解性增加, 成膜性能提高; 分子在溶液中的吸收光谱发生红移, 薄膜的吸收谱带变窄, 分子的最高占有分子轨道(HOMO)能级提高. 以D-A-D型有机小分子为给体, 富勒烯C₆₀衍生物-苯基-C₆₁-丁酸甲酯(PCBM)为受体制备了结构为ITO/PEDOT∶PSS/D-A-D∶PCBM/LiF/Al的体异质结太阳能电池. 研究结果表明, 基于单烷基链的TPT-S的太阳能电池具有相对较高的能量转换效率. 说明在D-A-D型有机小分子太阳能电池材料中, 烷基链的数目是决定材料性能及器件性能的重要因素之一.     

基于含蒽荧光配体的层柱型金属有机框架的合成及压致变色研究

利用含蒽荧光配体9,10-双[(E)-2-(吡啶-4-基)乙烯基]蒽(BP4VA)分别与2种不同长度的二羧酸配体反应,合成了层柱型的金属有机框架(MOFs)材料FDM-26和具有dia拓扑的三维材料FDM-27,并解析了其单晶结构.此外,对含有配位键断裂缺陷的基于BP4VA配体的层柱型MOFs材料FDM-22晶体施加外界压力,研究了压力刺激对FDM-22结构和荧光性质的影响.结果表明,在压力作用下,FDM-22能够保持结构稳定,但其荧光发射波长出现红移.经分析发现,此压致变色性能是由于结构内压力诱导生成的配位缺陷数目增加所致.     

Effect of the surfactant alkyl chain length on the stabilisation of lyotropic nematic phases

Lyotropic quaternary mixtures of potassium alkanoates (KCx) and sodium alkyl sulphates (NaCxS), where x is the number of carbon atoms in their alkyl chains, were prepared to investigate the effect of the surfactant alkyl chain length on the stabilisation of lyotropic nematic phases. The lyotropic mixtures investigated were formed by the dissolution of KCx (NaCxS) surfactants in the mixture of Rb₂SO₄/1-decanol/water (Na₂SO₄/1-decanol/water), separately. The uniaxial-to-biaxial nematic phase transitions were identified from the temperature dependence of the birefringences of the nematic phases by means of laser conoscopy. The micelle dimensions were obtained from small-angle X-ray scattering measurements. It was observed that the increase in the surfactant alkyl chain length causes the micellar growth in the plane perpendicular to the main amphiphile bilayer. The surfactant alkyl chain length plays a key role on the shape anisotropy of micelles, which triggers the orientational fluctuations that are responsible for the stabilisation of the different lyotropic nematic phases.     

Synthesis and the effect of alkyl chain length on optoelectronic properties of diarylethene derivatives

Photochromic symmetrical diarylethene derivatives 1a-6a bearing different long alkyl chains at 2-position of thiophene rings have been synthesized and their structures have been determined by single-crystal X-ray diffraction analysis. The effect of alkyl chain length on their optoelectronic properties, such as photochromism in solution as well as in the crystalline phase and electrochemical performance was investigated in detail. These diarylethenes have showed good photochromic behavior both in solution and in the single crystalline phase. Introduction of the long alkyl chains at 2-position of bis(5-formyl-3-thienyl)perfluorocyclopentene increased the absorption coefficients of both open- and closed-ring isomers and induced bathochromic shifts of the maximal wavelength absorption of the closed-ring isomers. The long alkyl chains can also decrease the cyclization/cycloreversion quantum yields and the oxidation potentials. The cyclic voltammetry indicated that the band gap of these diarylethene derivatives was significantly affected by the alkyl chain length.     

Synthesis and the effect of alkyl chain length on photochromic properties of diarylethene derivatives

A new class of photochromic diarylethenes bearing pyrrole and thiophene units with different length of alkyl chains at 2-position of thiophene rings have been synthesized. Their characteristics, including photochromism and fatigue resistance were investigated systematically, and each diarylethene derivative showed good photochromic properties whether in solution or in PMMA films. The alkyl group moiety was connected directly to the central cyclopentene ring as a heteroaryl unit and availably participated in photoisomerization reaction. And some properties, for example, the conversion ratio in the photostationary state(PSS) and the absorption coefficient of the ring-closed isomers in acetonitrile were significantly affected by the alkyl chain length. The results revealed that substituents of alkyl chain played an important role in the photoisomerization process of diarylethenes.     

Microemulsions: Effect of alkyl chain length of alcohol and alkane

In microemulsions consisting of four components, i.e. detergent — water — oil — cosurfactant, the free energy of transfer from the continuous oil phase to the interfacial region for the cosurfactant is reported. From the effect of temperature on the free energy, the entropy and the enthalpy values are also reported. The effect of chain length of the alcohol (cosurfactant) is also described. It is further shown, that if the oil phase consists of hexadecane, then the free energy changes as a linear function of the number of carbon atoms in the cosurfactant. On the other hand, if the oil phase is benzene, the cosurfactant chain length has very little effect. These data are analyzed with respect to the microemulsion structure and stability.     

Effects of alkyl chain length of monomer and dye-doped type on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Polymer-dispersed liquid crystal (PDLC) films containing a series of monomers with different alkyl chain lengths were prepared by nucleophile-initiated thiol-ene click reaction. The effect of alkyl chain length of monomers, dye and temperature on electro-optical properties of PDLC films was investigated. It was found that the alkyl chain length and polymerisation rate of monomers together determine the size of liquid crystal (LC) droplets, thus affecting the electro-optical properties of PDLC. In addition, the type and content of dyes could be optimised to obtain PDLC materials with better comprehensive properties for display.     

Influence of alkyl chain length of alpha olefin sulfonates on surface and interfacial properties

Alpha olefin sulfonates (AOS) with various alkyl chain lengths have been used to investigate the influence of alkyl chain length on the interfacial properties at air–water, liquid paraffin–water, and parafilm–water interfaces. It was found that the critical micelle concentration decreased with increasing alkyl chain length, while the efficiency of reducing surface tension was inverse relationship with alkyl chain length. The diffusion coefficient obviously reduced with an increase of surfactant concentration and alkyl chain length. The C_14-16AOS shows better wettability and emulsification than C_16-18AOS and C_20-24AOS. For foaming properties, the foamability and foam stability dramatically decreased with increasing alkyl chain length.     

Synthesis and phase behaviors of side‐chain liquid‐crystalline polymers containing azobenzene mesogen with the different length alkyl tail

A series of side‐chain liquid‐crystal polymers, poly[6‐[4‐(4′‐n‐alkyl benzoateazo)phenoxy]‐hexylmethacrylate]s (PMAzoCOOR_m, m = 1, 2, 3, 4, 5, 6, 8, 10, 14, and 18) have been prepared by two synthetic methods. The chemical structure of the monomers was confirmed by ¹H NMR and mass spectrometry. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatograph. The phase behaviors of polymers were investigated by the combination of techniques including differential scanning calorimetry, polarized optical microscopy, and small‐angle X‐ray scattering. For m = 1, 2, 3, 4, 5, and 6, the polymers exhibited a monosmectic A phase in which the smectic layer period was almost identical to the side‐chain length. In addition, for m = 2, 3, 4, and 5, they presented the monosmectic C phase in low temperature; moreover, the tilt angle increased from 23.3 to 40.5°. For m = 8, 10, 14, and 18, the polymers showed a bilayer smectic A phase in which the layer spacing was larger than a fully extended side chain but less than two extended chains. On the other hand, for the clearing point, with the increasing of m, it first decreased, and then increased. All of these indicated that the length of alkyl tails played an important role in the phase behaviors of these polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2759–2768     

Polymer BHJ solar cell performance tuning by C60 fullerene derivative alkyl side‐chain length

A systematic study on the influence of the alkyl side‐chain length of C₆₀ based fullerene derivatives in polymer solar cells based on an anthracene‐containing poly(p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) copolymer (AnE‐PV) is reported. It is shown that the alkyl side‐chain length of the fullerene derivative strongly correlates with the individual photovoltaic parameters. The most pronounced dependence on the side‐chain length is found for the fill factor, spanning the range between 50–72%, which dominantly controls in combination with the short‐circuit current the power conversion efficiency. The maximum performance of 4.8% was found for an ethyl terminated side‐chain, whereas larger alkyl groups resulted in a gradually decreasing power conversion efficiency. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Effect of the alkyl chain length of the bonded stationary phase on solute retention in reversed-phase high-performance liquid chromatography

Summary A comparison of the chromatographic retention characteristics of nonpolar bonded stationary phases was investigated. The results show that the interactions between the solutes and the stationary phases having C₂, C₈ and C₁₈ alkyl groups are almost similar in the range of the mobile phase investigated. This interaction is considered as the solvophobic effect.     

Effect of alkyl side chain length on the properties of polyetherimides from molecular simulation combined with experimental results

Three polyetherimides (PEIs) with the same backbone of Ultem 100 but different lengths of the alkyl side chains were simulated by using molecular dynamics and molecular mechanics techniques to investigate the effect of side chain length on their properties and physical mechanism behind. Simulation results, which are consistent to the experimental data, show that PEI‐5 with four methylene units in each alkyl side chain has higher T_g (glass transition temperature) and higher tensile strength, but lower tensile elongation at break than those of PEI‐6 with five and PEI‐8 with seven methylene units in each alkyl side chain. However, unlike the traditional phenomena, conformational analysis provides that PEI‐5 with the highest T_g gives the highest flexibility to the polymer chain, whereas PEI‐8 with the lowest T_g imparts the lowest flexibility resulting from attachment of longer alkyl side chain increase the rigidity of backbone. From the calculated ratio of the accessible volume to the total volume for each system, the highest ratio of PEI‐8 indicates that long alkyl side chains generate more free volume than short side chains, acting as an internal plasticizer in bulk structure. It is the internal plasticizing effect that is predominantly responsible for the abnormal properties, instead of the rigidity from side chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 595–599, 2010