Substrate‐Free and Shapeless Planar Micro‐Supercapacitors

Micro‐supercapacitors (MSCs), albeit powerful, are unable to broaden their potential applications primarily because they are not as flexible and morphable as electronics. To address this problem, a universal strategy to fabricate substrate‐free, ultrathin, shapeless planar‐MSCs with high‐performance tenability under serious deformation is put forward. These represent a new class of “all‐inside‐one” film supercapacitors, achieved by encapsulating two‐dimensional interdigital microelectrodes within chemically cross‐linked polyvinyl‐alcohol‐based hydrogel electrolyte containing graphene oxide (GO). GO nanosheets significantly improve ionic conductivity, enhance the capacitance, and boost robustness of hydrogel electrolyte. Consequently, the entire MSC, while being only 37 µm thick, can be crumpled and its shape can self‐adjust through fluid channel ten times smaller than its original size without any damage, demonstrating shapelessness. Using MXene as active material, high single‐cell areal capacitance of 40.8 mF cm^?2 is achieved from microelectrodes as thin as 5 µm. Furthermore, to demonstrate wide applicability of this protocol, screen‐printed graphene‐based highly integrated MSCs connecting nine cells in series are fabricated to stably output a high voltage of 7.2 V while crumpling them from 0.11 to 0.01 cm^?3, manifesting superior performance uniformity. This protocol allows the coexistence of high performance with incredible flexibility that may greatly diversify MSCs' applications.     

Superior Micro‐Supercapacitors Based on Graphene Quantum Dots

Graphene quantum dots (GQDs) have attracted tremendous research interest due to the unique properties associated with both graphene and quantum dots. Here, a new application of GQDs as ideal electrode materials for supercapacitors is reported. To this end, a GQDs//GQDs symmetric micro‐supercapacitor is prepared using a simple electro‐deposition approach, and its electrochemical properties in aqueous electrolyte and ionic liquid electrolyte are systematically investigated. The results show that the as‐made GQDs micro‐supercapacitor has superior rate capability up to 1000 V s^?1, excellent power response with very short relaxation time constant (τ₀ = 103.6 μs in aqueous electrolyte and τ₀ = 53.8 μs in ionic liquid electrolyte), and excellent cycle stability. Additionally, another GQDs//MnO₂ asymmetric supercapacitor is also built using MnO₂ nanoneedles as the positive electrode and GQDs as the negative electrode in aqueous electrolyte. Its specific capacitance and energy density are both two times higher than those of GQDs//GQDs symmetric micro‐supercapacitor in the same electrolyte. The results presented here may pave the way for a new promising application of GQDs in micropower suppliers and microenergy storage devices.     

One‐Step Scalable Fabrication of Graphene‐Integrated Micro‐Supercapacitors with Remarkable Flexibility and Exceptional Performance Uniformity

The rapid development of miniature electronics has accelerated the demand for simplified and scalable production of micro‐supercapacitors (MSCs); however, the preparation of active materials, patterning microelectrodes, and subsequent modular integration of the reported MSCs are normally separated and are involved in multiple complex steps. Herein, a one‐step, cost‐effective strategy for fast and scalable fabrication of patterned laser‐induced graphene (LIG) for all‐solid‐state planar integrated MSCs (LIG‐MSCs) with various form factors of designable shape, exceptional flexibility, performance uniformity, superior modularization, and high‐temperature stability is demonstrated. Notably, using the conductive and porous LIG patterns composed of randomly stacked graphene nanosheets simultaneously acting as both microelectrodes and interconnects, the resulting LIG‐MSCs represent typical electrical double capacitive behavior, having an impressive areal capacitance of 0.62 mF cm^?2 and long‐term stability without capacitance degeneration after 10 000 cycles. Furthermore, LIG‐MSCs display exceptional mechanical flexibility and adjustable voltage and capacitance output through arbitrary arrangement of cells connected in series and in parallel, indicative of exceptional performance customization. Moreover, all‐solid‐state LIG‐MSCs working at ionogel electrolyte exhibit highly stable performance even at high temperature of 100 °C, with 90% capacitance retention over 3000 cycles, suggestive of outstanding reliability. Therefore, the LIG‐MSCs offer tremendous opportunities for miniature power source‐integrated microelectronics.     

Development of Vanadium‐Coated Carbon Microspheres: Electrochemical Behavior as Electrodes for Supercapacitors

Vanadium‐coated carbon‐xerogel microspheres are successfully prepared by a specific designed sol–gel method, and their supercapacitor behavior is tested in a two‐electrode system. Nitrogen adsorption shows that these composite materials present a well‐developed micro‐ and mesoporous texture, which depends on the vanadium content in the final composite. A high dispersion of vanadium oxide on the carbon microsphere surface is reached, being the vanadium particle size around 4.5 nm. Moreover, low vanadium oxidation states are stabilized by the carbon matrix in the composites. The complete electrochemical characterization of the composites is carried out using cyclic voltammetry, chronopotentiometry, cycling charge–discharge, and impedance spectroscopy. The results show that these composites present high capacitance as 224 F g^?1, with a high capacitance retention which is explained on the basis of the presence of vanadium oxide, texture, and chemistry surface.     

In‐Plane Micro‐Supercapacitors for an Integrated Device on One Piece of Paper

Portable and wearable sensors have attracted considerable attention in the healthcare field because they can be worn or implanted into a human body to monitor environmental information. However, sensors cannot work independently and require power. Flexible in‐plane micro‐supercapacitor (MSC) is a suitable power device that can be integrated with sensors on a single chip. Meanwhile, paper is an ideal flexible substrate because it is cheap and disposable and has a porous and rough surface that enhances interface adhesion with electronic devices. In this study, a new strategy to integrate MSCs, which have excellent electrochemical and mechanical performances, with sensors on a single piece of paper is proposed. The integration is achieved by printing Ni circuit on paper without using a precoating underlay. Ink diffusion is also addressed to some degree. Meanwhile, a UV sensor is integrated on a single paper, and the as‐integrated device shows good sensing and self‐powering capabilities. MSCs can also be integrated with a gas sensor on one‐piece paper and can be charged by connecting it to a solar cell. Thus, it is potentially feasible that a flexible paper can be used for integrating MSCs with solar cell and various sensors to generate, store, and use energy.     

High‐Performance Wearable Micro‐Supercapacitors Based on Microfluidic‐Directed Nitrogen‐Doped Graphene Fiber Electrodes

Fiber‐shaped micro‐supercapacitors (micro‐SCs) have attracted enormous interest in wearable electronics due to high flexibility and weavability. However, they usually present a low energy density because of inhomogeneity and less pores. Here, we demonstrate a microfluidic‐directed strategy to synthesize homogeneous nitrogen‐doped porous graphene fibers. The porous fibers‐based micro‐SCs utilize solid‐state phosphoric acid/polyvinyl alcohol (H₃PO₄/PVA) and 1‐ethyl‐3‐methylimidazolium tetrafluoroborate/poly(vinylidenefluoride‐co‐hexafluoropropylene) (EMIBF₄/PVDF‐HFP) electrolytes, which show significant improvements in electrochemical performances. Ultralarge capacitance (1132 mF cm^?2), high cycling‐stability, and long‐term bending‐durability are achieved based on H₃PO₄/PVA. Additionally, high energy densities of 95.7–46.9 µWh cm^?2 at power densities of 1.5–15 W cm^?2 are obtained in EMIBF₄/PVDF‐HFP. The key to higher performances stems from microfluidic‐controlled fibers with a uniformly porous network, large specific surface area (388.6 m² g^?1), optimal pyridinic nitrogen (2.44%), and high electric conductivity (30785 S m^?1) for faster ion diffusion and flooding accommodation. By taking advantage of these remarkable merits, this study integrates micro‐SCs into flexible and fabric substrates to power audio–visual electronics. The main aim is to clarify the important role of microfluidic techniques toward the architecture of electrodes and promote development of wearable electronics.     

Sputtered Titanium Carbide Thick Film for High Areal Energy on Chip Carbon‐Based Micro‐Supercapacitors

The areal energy density of on‐chip micro‐supercapacitors should be improved in order to obtain autonomous smart miniaturized sensors. To reach this goal, high surface capacitance electrode (>100 mF cm^?2) has to be produced while keeping low the footprint area. For carbide‐derived carbon (CDC) micro‐supercapacitors, the properties of the metal carbide precursor have to be fine‐tuned to fabricate thick electrodes. The ad‐atoms diffusion process and atomic peening effect occurring during the titanium carbide sputtering process are shown to be the key parameters to produce low stress, highly conductive, and thick TiC films. The sputtered TiC at 10^?3 mbar exhibits a high stress level, limiting the thickness of the TiC‐CDC electrode to 1.5 µm with an areal capacitance that is less than 55 mF cm^?2 in aqueous electrolyte. The pressure increase up to 10^?2 mbar induces a clear reduction of the stress level while the layer thickness increases without any degradation of the TiC electronic conductivity. The volumetric capacitance of the TiC‐CDC electrodes is equal to 350 F cm^?3 regardless of the level of pressure. High values of areal capacitance (>100 mF cm^?2) are achieved, whereas the TiC layer is relatively thick, which paves the way toward high‐performance micro‐supercapacitors.     

Phthalocyanine‐Based 2D Conjugated Metal‐Organic Framework Nanosheets for High‐Performance Micro‐Supercapacitors

2D conjugated metal‐organic frameworks (2D c‐MOFs) are emerging as a novel class of conductive redox‐active materials for electrochemical energy storage. However, developing 2D c‐MOFs as flexible thin‐film electrodes have been largely limited, due to the lack of capability of solution‐processing and integration into nanodevices arising from the rigid powder samples by solvothermal synthesis. Here, the synthesis of phthalocyanine‐based 2D c‐MOF (Ni₂[CuPc(NH)₈]) nanosheets through ball milling mechanical exfoliation method are reported. The nanosheets feature with average lateral size of ≈160 nm and mean thickness of ≈7 nm (≈10 layers), and exhibit high crystallinity and chemical stability as well as a p‐type semiconducting behavior with mobility of ≈1.5 cm² V^?1 s^?1 at room temperature. Benefiting from the ultrathin feature, the nanosheets allow high utilization of active sites and facile solution‐processability. Thus, micro‐supercapacitor (MSC) devices are fabricated mixing Ni₂[CuPc(NH)₈] nanosheets with exfoliated graphene, which display outstanding cycling stability and a high areal capacitance up to 18.9 mF cm^?2; the performance surpasses most of the reported conducting polymers‐based and 2D materials‐based MSCs.     

Solid‐State Hybrid Fibrous Supercapacitors Produced by Dead‐End Tube Membrane Ultrafiltration

The development of flexible supercapacitors with high volumetric performance is critically important for portable electronics applications, which are severely volume limited. Here, dead‐end tube membrane (DETM) ultrafiltration is used to produce densely compacted carbon‐nanotube/graphene fibrous films as solid‐state supercapacitor electrodes. DETM is widely used in the water purification industry, but to date its use has not been explored for making supercapacitor electrode materials. Compared with vacuum‐assisted filtration, dead‐end filtration of the mixture through a porous membrane is carried out under much higher pressure, and thus the solvent can be gotten rid of much faster, with less energy consumption and in an environmentally friendly manner. More importantly, phase separation of the solid constituents in the mixture, due to concentration increase, can be suppressed in DETM. Therefore, highly uniform and densely compacted supercapacitor electrodes can be obtained with very high volumetric energy and power density. The volumetric energy density in this work (≈2.7 mWh cm^‐3) is at a higher level than all the all‐solid‐state fibrous supercapacitors reported to date. This can be attributed to the DETM process used, which produces a densely compacted network structure without compromising the availability of electrochemically active surface area.     

A Facile,High‐Yield,and Freeze‐and‐Thaw‐Assisted Approach to Fabricate MXene with Plentiful Wrinkles and Its Application in On‐Chip Micro‐Supercapacitors

MXene, as a new member of the two‐dimensional (2D) material family, has been widely studied. However, people often pay close attention to the versatility of MXene while ignoring its low exfoliation yield. In this work, a simplified and effective strategy to exfoliate multilayer‐MXene via the gentle water freezing‐and‐thawing (FAT) approach is proposed. The volume expansion of intercalated water can promote the exfoliation of MXene nanosheets. The yield of large FAT‐MXene flakes with special wrinkles can reach 39% after four cycles of the FAT process. Moreover, combining with sonication treatment can boost the yield of small MXene to a record high value of 81.4%. With the help of a commercial interdigital mask, an on‐chip all‐MXene micro‐supercapacitor (MSC) assembled by large FAT‐MXene is fabricated, exhibiting high areal and volumetric capacitance of 23.6 mF cm^?2 and 591 F cm^?3, respectively. This remarkable electrochemical performance of MXene‐MSC also confirms the high quality of MXene through this FAT strategy. This study may open up a new method to simultaneously boost the yield of MXene with small or large flake sizes, facilitating large‐scale and size‐dependent research on MXene.     

Multifunctional Three‐Dimensional T‐Junction Graphene Micro‐Wells: Energy‐Efficient,Plasma‐Enabled Growth and Instant Water‐Based Transfer for Flexible Device Applications

The “third‐generation” 3D graphene structures, T‐junction graphene micro‐wells (T‐GMWs) are produced on cheap polycrystalline Cu foils in a single‐step, low‐temperature (270 °C), energy‐efficient, and environment‐friendly dry plasma‐enabled process. T‐GMWs comprise vertical graphene (VG) petal‐like sheets that seemlessly integrate with each other and the underlying horizontal graphene sheets by forming T‐junctions. The microwells have the pico‐to‐femto‐liter storage capacity and precipitate compartmentalized PBS crystals. The T‐GMW films are transferred from the Cu substrates, without damage to the both, in de‐ionized or tap water, at room temperature, and without commonly used sacrificial materials or hazardous chemicals. The Cu substrates are then re‐used to produce similar‐quality T‐GMWs after a simple plasma conditioning. The isolated T‐GMW films are transferred to diverse substrates and devices and show remarkable recovery of their electrical, optical, and hazardous NO₂ gas sensing properties upon repeated bending (down to 1 mm radius) and release of flexible trasparent display plastic substrates. The plasma‐enabled mechanism of T‐GMW isolation in water is proposed and supported by the Cu plasma surface modification analysis. Our GMWs are suitable for various optoelectronic, sesning, energy, and biomedical applications while the growth approach is potentially scalable for future pilot‐scale industrial production.     

Local State‐of‐Charge Mapping of Lithium‐Ion Battery Electrodes

Current lithium‐ion battery technology is gearing towards meeting the robust demand of power and energy requirements for all‐electric transportation without compromising on the safety, performance, and cycle life. The state‐of‐charge (SOC) of a Li‐ion cell can be a macroscopic indicator of the state‐of‐health of the battery. The microscopic origin of the SOC relates to the local lithium content in individual electrode particles and the effective ability of Li‐ions to transport or shuttle between the redox couples through the cell geometric boundaries. Herein, micrometer‐resolved Raman mapping of a transition‐metal‐based oxide positive electrode, Li_1‐x(Ni_yCo_zAl_1‐y‐z)O₂, maintained at different SOCs, is shown. An attempt has been made to link the underlying changes to the composition and structural integrity at the individual particle level. Furthermore, an SOC distribution at macroscopic length scale of the electrodes is presented.     

Switchable Supercapacitors with Transistor‐Like Gating Characteristics (G‐Cap)

A novel three‐electrode electrolyte supercapacitor (electric double‐layer capacitor [EDLC]) architecture in which a symmetrical interdigital “working” two‐electrode micro‐supercapacitor array (W‐Cap) is paired with a third “gate” electrode that reversibly depletes/injects electrolyte ions into the system controlling the “working” capacity effectively is described. All three electrodes are based on precursor‐derived nanoporous carbons with well‐defined specific surface area (735 m² g^?1). The interdigitated architecture of the W‐Cap is precisely manufactured using 3D printing. The W‐Cap operating with a proton conducting PVA/H₂SO₄‐hydrogel electrolyte and high capacitance (6.9 mF cm^?2) can be repeatedly switched “on” and “off”. By applying a low DC bias potential (?0.5 V) at the gate electrode, the AC electroadsorption in the coupled interdigital nanoporous carbon electrodes of the W‐Cap is effectively suppressed leading to a stark capacity drop by two orders of magnitude from an “on” to an “off” state. The switchable micro‐supercapacitor is the first of its kind. This general concept is suitable for implementing a broad range of nanoporous materials and advanced electrolytes expanding its functions and applications in future. The integration of intelligent functions into EDLC devices has extensive implications for diverse areas such as capacitive energy management, microelectronics, iontronics, and neuromodulation.     

Micro‐Supercapacitors Based on Interdigital Electrodes of Reduced Graphene Oxide and Carbon Nanotube Composites with Ultrahigh Power Handling Performance

A novel method for fabricating micro‐patterned interdigitated electrodes based on reduced graphene oxide (rGO) and carbon nanotube (CNT) composites for ultra‐high power handling micro‐supercapacitor application is reported. The binder‐free microelectrodes were developed by combining electrostatic spray deposition (ESD) and photolithography lift‐off methods. Without typically used thermal or chemical reduction, GO sheets are readily reduced to rGO during the ESD deposition. Electrochemical measurements show that the in‐plane interdigital design of the microelectrodes is effective in increasing accessibility of electrolyte ions in‐between stacked rGO sheets through an electro‐activation process. Addition of CNTs results in reduced restacking of rGO sheets and improved energy and power density. Cyclic voltammetry (CV) measurements show that the specific capacitance of the micro‐supercapacitor based on rGO–CNT composites is 6.1 mF cm^?2 at 0.01 V s^?1. At a very high scan rate of 50 V s^?1, a specific capacitance of 2.8 mF cm^?2 (stack capacitance of 3.1 F cm^?3) is recorded, which is an unprecedented performance for supercapacitors. The addition of CNT, electrolyte‐accessible and binder‐free microelectrodes, as well as an interdigitated in‐plane design result in a high‐frequency response of the micro‐supercapacitors with resistive‐capacitive time constants as low as 4.8 ms. These characteristics suggest that interdigitated rGO–CNT composite electrodes are promising for on‐chip energy storage application with high power demands.     

Recent Developments and Novel Applications of Thin Film,Light‐Emitting Transistors

Light‐emitting field‐effect transistors (LEFETs) combine switching and amplification with light emission and thus represent an interesting optoelectronic device. They are not limited anymore to a few examples and specific materials but are nearly universal for a wide range of semiconductors, from organic to inorganic and nanoscale. This review introduces the basic working principles of lateral unipolar and ambipolar LEFETs and discusses recent examples based on various solution‐processed semiconducting materials. Applications beyond simple light emission are presented and possible future directions for light‐emitting transistors with added functionalities are outlined.     

Stamping of Flexible,Coplanar Micro‐Supercapacitors Using MXene Inks

The fast growth of portable smart electronics and internet of things have greatly stimulated the demand for miniaturized energy storage devices. Micro‐supercapacitors (MSCs), which can provide high power density and a long lifetime, are ideal stand‐alone power sources for smart microelectronics. However, relatively few MSCs exhibit both high areal and volumetric capacitance. Here rapid production of flexible MSCs is demonstrated through a scalable, low‐cost stamping strategy. Combining 3D‐printed stamps with arbitrary shapes and 2D titanium carbide or carbonitride inks (Ti₃C₂T_x and Ti₃CNT_x, respectively, known as MXenes), flexible all‐MXene MSCs with controlled architectures are produced. The interdigitated Ti₃C₂T_x MSC exhibits high areal capacitance: 61 mF cm^?2 at 25 µA cm^?2 and 50 mF cm^?2 as the current density increases by 32 fold. The Ti₃C₂T_x MSCs also showcase capacitive charge storage properties, good cycling lifetime, high energy and power densities, etc. The production of such high‐performance Ti₃C₂T_x MSCs can be easily scaled up by designing pad or cylindrical stamps, followed by a cold rolling process. Collectively, the rapid, efficient production of flexible all‐MXene MSCs with state‐of‐the‐art performance opens new exciting opportunities for future applications in wearable and portable electronics.     

Hierarchical Ordered Dual‐Mesoporous Polypyrrole/Graphene Nanosheets as Bi‐Functional Active Materials for High‐Performance Planar Integrated System of Micro‐Supercapacitor and Gas Sensor

Planar integrated systems of micro‐supercapacitors (MSCs) and sensors are of profound importance for 3C electronics, but usually appear poor in compatibility due to the complex connections of device units with multiple mono‐functional materials. Herein, 2D hierarchical ordered dual‐mesoporous polypyrrole/graphene (DM‐PG) nanosheets are developed as bi‐functional active materials for a novel prototype planar integrated system of MSC and NH₃ sensor. Owing to effective coupling of conductive graphene and high‐sensitive pseudocapacitive polypyrrole, well‐defined dual‐mesopores of ≈7 and ≈18 nm, hierarchical mesoporous network, and large surface area of 112 m² g^?1, the resultant DM‐PG nanosheets exhibit extraordinary sensing response to NH₃ as low as 200 ppb, exceptional selectivity toward NH₃ that is much higher than other volatile organic compounds, and outstanding capacitance of 376 F g^?1 at 1 mV s^?1 for supercapacitors, simultaneously surpassing single‐mesoporous and non‐mesoporous counterparts. Importantly, the bi‐functional DM‐PG‐based MSC‐sensor integrated system represents rapid and stable response exposed to 10–40 ppm of NH₃ after only charging for 100 s, remarkable sensitivity of NH₃ detection that is close to DM‐PG‐based MSC‐free sensor, impressive flexibility with ≈82% of initial response value even at 180°, and enhanced overall compatibility, thereby holding great promise for ultrathin, miniaturized, body‐attachable, and portable detection of NH₃.