Current advances in electrochemical genosensors for detecting microRNA cancer markers

The electrochemical microRNA sensors are considered efficient, simple, and inexpensive analytical tools for the early diagnosis of cancer biomarkers. To enhance the sensitivity of the electrochemical genosensors toward detection of microRNAs, several amplification strategies based mainly on nanomaterials, enzymes, and oligonucleotides are investigated and discussed. This review highlights the main current achievements regarding the new promising and sensitive strategies for genosensors’ development, thus allowing for miroRNA analysis at the attomolar level.     

Microneedles-based electrochemical sensors: New tools for advanced biosensing

Electrochemical biosensors are used worldwide as analytical tools from laboratory applications to market products. The performance of electrochemical sensing can be boosted by adopting the microneedle (MN) geometry as an innovative configuration of standard electrodes. MNs can be miniaturized, easily functionalized, and properly designed for specific aim monitoring, but most of all, they allow a low invasive controlling tool for growth and for environment influence in plant and a painless door to human body fluids where target analytes can be detected, overcoming the natural barrier of the skin. In this review, the very recent developments in MN-based electrochemical biosensing published in the literature are summarized.     

Hydrides compounds for electrochemical applications

Hydrides have been used since a long time for solid-state hydrogen storage and electrochemical nickel-metal hydride batteries. Besides these applications, growing attention has been devoted to their development as anode materials, as well as solid electrolytes for Li-ion and other ion batteries. Herein, we review and summarize the recent advances of hydrides as negative electrodes for Ni-MH and A-ion batteries (A = Li, Na), and as electrolyte for all solid-state batteries (ASSB). Metallic hydrides such as intergrowth compounds are highlighted as the best compromise up to now for Ni-MH. Regarding anodes of Li-ion batteries, MgH₂, especially its combination with TiH₂, provides very promising results. Complex hydrides such as Li-borohydride and related closo-borates and monovalent carborate boron clusters appear to be very attractive as solid electrolytes for Li-based ASSB, whereas closo-hydroborate sodium salts and closo-carboborates are investigated for Na- and Mg-ASSB. Finally, further research directions are foreseen for hydrides in electrochemical applications.     

Ratiometric electrochemical,electrochemiluminescent, and photoelectrochemical strategies for environmental contaminant detection

Global environmental pollution issue has boosted the development of novel analytical techniques with high efficiency and accuracy for detection of hazardous contaminants. Strategies based on electrochemical, electrochemiluminescent, or photoelectrochemical analysis are among the promising detection approaches to provide rapid and sensitive analysis. Currently, combining ratiometric assay with such strategies can further promote their sensing reliability and reproducibility in complex conditions. This review highlights recent advances of ratiometric electrochemical, electrochemiluminescent, and photoelectrochemical sensors in the past 2 years. Their signal generation strategies and analysis applications, particularly for the environmental contaminant detection, are discussed in detail, and a future prospect in this area from us is also provided.     

Probing electrochemical surface/interfacial reactions with liquid cell transmission electron microscopy: a challenge or an opportunity?

Understanding electrochemical reactions at material surfaces and interfaces is crucial for the development of next-generation battery electrodes and electrocatalysts — two key areas in global CO₂ mitigation strategies. By allowing these dynamic reactions to be captured on an atomic level and in real-time, the liquid cell transmission electron microscopy (LC-TEM) technique has carved itself a niche in energy materials research. Several key problems are being investigated, ranging from addressing dendrite growth in lithium-ion batteries that cause a thermal runaway, to understanding mass loss of expensive platinum catalysts in native hydrogen fuel-cell environments. Unfortunately, as with any emerging technology, LC-TEM is not without its share of problems. Undesired electron beam interactions with the liquid, low containable liquid volumes, and poor spatial resolution due to plural scattering are only some of the many problems which must still be fully resolved.This short review highlights the strengths and weaknesses behind LC-TEM while providing updates on the latest applications and technical advances in the areas of dose-minimization strategies, improvements in analytical abilities, and novel closed-cell design. Notable future opportunities include off-axis holography, diffraction tomography, and pump-probe laser excitations — all carried out in liquids.     

Investigating the binding measurements of human α-acid glycoprotein with chlorambucil and dacarbazine in the presence of imidazolium based -ionic liquid by affinity capillary electrophoresis

Human alpha (α1)-acid glycoprotein (AGP) is an acute phase protein whose plasma concentration increases several-folds in the presence of various diseases. The variability in AGP plasma concentration is expected to have a huge impact on the drug binding equilibrium. Therefore, a precise measurement of AGP-drug binding is of great demand for drug development. In the current study, an ionic liquid-based aqueous two-phase system combined with affinity capillary electrophoresis (ILATPS/ACE) was utilised in order to improve the accuracy of AGP-drug binding analysis through the measurements of electrophoretic mobilities. The utilisation of ILATPS has shown to have a positive impact on the stability of AGP activity solution during the storage for an extended period of time. In addition, the effect of various alkyl chains (C2-C10) of imidazolium-based ILs with concentrations ranging between 10.00 and 1000.0 μmol L⁻¹ on the AGP binding with the anti-cancer drugs chlorambucil (CHL) and dacarbazine (DAC) was examined by the system developed (ILATPS/ACE). A 100.00 μmol L⁻¹ 1-ethyl-3-methylimidazolium chloride (EMImCl) prepared in the physiological buffer conditions containing AGP (5.00–100.00 µmol L⁻¹) has provided an accurate apparent binding constant of 1.99 ± 0.11 and 6.95 ± 0.14 L mmol⁻¹ with CHL and DAC respectively. Apart from the ACE analysis, EMImCl/phosphate buffer solution was found to be a distinguished system that could lengthen the stability of AGP activity for a period of time reaching 90 days during the solution storage at 4.00 °C. This effect is thought to be due to the easy conversion of one-phase EMImCl/phosphate buffer/AGP at the ambient lab temperature into the two-phase solution at refrigerator temperature, 4.00 °C, and vice versa. Therefore, the ILATP/ACE system could be used to enhance the accuracy for other AGP-drug bindings with a fast, easy to use, and cost-effective analysis.     

Multi-component pharmacokinetics assessment of Artemisia annua L. in rats based on LC-ESI-MS/MS quantification combined with molecular docking

Artemisia annua L. (A. annua) has been used as herbal medicine in China for thousands of years for clearing deficiency heat, treating malaria and removing jaundice. A rapid, sensitive and specific liquid chromatography coupled with electrospray ionization tandem mass spectrometry (LC–ESI–MS/MS) method was developed, validated, and successfully used for simultaneous quantification of the active components in rat plasma after oral administration of A. annua extract. Molecular docking of each component with drug metabolizing enzymes was carried out to explore the effect of each component on CYP-mediated drug metabolism. Two coumarins (scopolin (SPL) and scopoletin (SPLT)), three flavonoids (rutin (RUT), chrysosplenol D (CHD), casticin (CAS)) and three sesquiterpenes (arteannuin B (ARN), dihydroartemisinic acid (DARM) and artemisinic acid (ARM)) were detected in rat plasma after oral administration. CHD and CAS were rapidly absorbed into rat blood with the T_max values of 0.11 ± 0.04 h and 0.13 ± 0.05 h, respectively. Their half-lives (t_1/2 2.68 ± 3.62 h and 0.33 ± 0.07 h) were shorter. SPLT were also rapidly absorbed into the blood (T_max 0.15 ± 0.03 h), but exhibited a longer half-life (t_1/2 6.53 ± 1.84 h), indicating that it could be effective in vivo for a longer period of time. The peak time of SPL, RUT, DARM and ARM ranged from 1 ～ 4 h, demonstrating that they could maintain considerable concentrations for a longer time. ARN showed strong enterohepatic circulation in rats, leading to slower onset time and longer effect. A few components including SPLT, CHD, CAS and ARN could be metabolized into their corresponding II phase metabolites combining with glucuronic acid or sulfuric acid. RUT could decompose its glycosyl to generate genin. The molecular docking results indicated that those flavonoids and coumarins of A. annua interacting with CYPs mainly through hydrogen bonding and π-π stacking had better CYP450 enzyme binding ability than the sesquiterpenoids, which were easier to induce drug interactions. This study presented an integrated strategy for investigating the pharmacokinetic behaviors of eight components in A. annua and laid the foundation for revealing the mechanism of action of A. annua in the organism.     

The glucocorticoid derivative with the phthalimide group cationic nanocrystal for ophthalmic application: a design space development approach

The glucocorticoid derivative of budesonide with a phthalimide group is a drug candidate to treat inflammatory eye diseases; nevertheless, it presents low water solubility. Drug nanocrystals have been proposed to overcome this hurdle. The development of an innovative ophthalmic anti-inflammatory nanosuspension was performed using a design space approach. We obtained the particle size reduction of this glucocorticoid derivative on a nanometer scale (approximately 165.0 nm), applying wet bead milling on a super reduced scale. The design of experiment supported the optimization of the formula evaluating the parameters that influence reducing the particle size and also allowed determining the design space. Considering the two statistical models developed and the size range obtained, we proposed that the optimized formulation for the glucocorticoid derivative nanosuspension may be 1.0 wt% glucocorticoid derivative and 0.092 wt% cetylpyridinium chloride. This formulation was characterized by the morphological, physical–chemical, and mucoadhesive in vitro test and showed potential for ophthalmic use with reduced frequency of product application, improved efficiency, and safety, which may promote better patient compliance.     

Probing nanoscale interfaces with electrochemical surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) is a powerful tool for studying nanoscale molecule-metal interfaces across a range of electrochemical applications. SERS combines molecular-level information with a high degree of surface specificity, making it an ideal tool for understanding interfacial processes, from understanding how analytes and electrolytes organize near metal surfaces to following surface-mediated reactions in real time. However, because SERS relies on the excitation of localized surface plasmons, additional effects such as the production of hot charge carriers and photothermal heating can impact electrochemical SERS signals. These effects must also be considered when using SERS for quantitative electrochemical studies.     

Progress in the design and synthesis of viscosupplements for articular joint lubrication

Throughout a lifetime, articular joints experience many loading cycles and are prone to mechanical degradation. To safeguard the cartilage in these joints, the synovial fluid acts as a natural lubricant. However, degenerative joint diseases, like osteoarthritis, alter the composition of synovial fluid, diminishing its protective properties. In such cases, exogenous lubricants or viscosupplements can be injected to enhance the compromised synovial fluid's function. Scientists are now developing next-generation viscosupplements, based on hyaluronic acid (HA), that can better bind to and adhere to cartilage. Additionally, non-HA-based viscosupplements offer benefits over HA-based ones, as they possess more intricate molecular architectures, such as dendrimer or bottlebrush-like structures. These viscosupplements draw inspiration from natural molecules present in synovial fluid, providing them with a distinct advantage.     

Electrochemical disinfection – State of the art and tendencies

Electrochemical disinfection has gained increasing interest in many sectors of social and industrial life. The reason is the growing need to disinfect the air, water, and special surfaces of different nature such as drinking water, wastewater, pool water, and other water qualities or surfaces. New research studies are reported and discussed. A stronger orientation on engineering aspects is intended. Following tendencies can be identified - research on complex liquid systems, implementation of risks consideration seen from by-product formation, and better cooperation between researchers and industry oriented to improve cell design and disinfection technology. Partially, reaction kinetics is studied and discussed at higher levels of likelihood. Furthermore, it can be found that more and more research papers deal with hybrid technologies to create novelty, to use synergistic effects and to meet the demands of real system treatment under practical conditions. A major focus can be identified for wastewater treatment/disinfection emphasizing electrocoagulation and electro-photocatalysis.     

Dynamics of liposomes in the fluid phase

We review the currently available material on the morphology and dynamics of phospholipids assembled into liposomes. Key information obtained from neutron scattering, nuclear magnetic resonance (NMR), and other techniques plays a crucial role in understanding the vital role of lipids in sustaining life in living organisms. We concentrate on the dynamics in the biologically important fluid phase in the time range from picoseconds to seconds, which includes a discussion of the center of mass diffusion of liposomes, membrane fluctuations; and lateral, rotational, and flip-flop motions of the lipids. We emphasize on the sensitivity of the dynamics on interactions with a variety of biologically relevant molecules such as cholesterol. By a comparison of data from literature, we witness a good agreement of the results from different techniques and studies.     

Fast and simple method for the detection and quantification of 15 synthetic dyes in sauce,cotton candy,and pickle by liquid chromatography/tandem mass spectrometry

A simple and sensitive liquid chromatography/tandem mass spectrometry (LC-MS/MS) method for the simultaneous determination of 15 illegal dyes (Sudan I, Sudan II, Sudan III, Sudan IV, Sudan Red G, Sudan Orange G, Sudan Red 7B, Para Red, Dimethyl Yellow, Rahodamine B, Sudan Black B, Sudan Red B, Auramine O, Toluidine Red and Orange II) was developed and validated in sauce, cotton candy, and pickle. The samples were extracted with acetonitrile without the use of solid-phase extraction cartridges. Chromatographic separation was achieved on a Zorbax Eclipse Plus C18 column with a flow rate of 500 µL/min at 45 °C, using a gradient elution with A (10 mM ammonium formate in water with 0.1% formic acid) and B (10 mM ammonium formate in acetonitrile (ACN) with 0.1% formic acid) as the mobile phase. The detection was performed on a AB Sciex 6500 Qtrap mass analyzer under multiple reaction monitoring mode. Limit of detection, quantification, linearity, and precision were determined during the validation process. Recoveries ranged from 82% to 119% for all synthetic dyes, in exception to Orange II in cotton candy and pickle, where signal was suppressed due to high matrix interference and poor ionization. This method offers a simple and rapid approach to detect and quantify prohibited dyes in foodstuff that can be utilized in food contaminant laboratories.     

Comprehensive chemical profiling and quantification of Shexiang Xintongning tablets by integrating liquid chromatography-mass spectrometry and gas chromatography-mass spectrometry

Shexiang Xintongning tablet (SXXTN) is a traditional Chinese medicine (TCM) preparation for the treatment of coronary heart disease (CHD) angina pectoris. However, due to the complexity of the compounds in SXXTN, the active chemical components responsible for the therapeutic effect are still ambiguous. The purpose of our study was to characterize the chemical profile of SXXTN and quantify the representative chemicals. The high-performance liquid chromatography coupled with time-of-flight mass spectrometry (HPLC-QTOF MS) method and gas chromatograph coupled with mass spectrometry (GC–MS) method were utilized to identify the chemical constituents of SXXTN. A total of 140 compounds including alkaloids, ginsenosides, organic acids, esters, triterpenes, phthalides and amino acid were identified in accordance with their retention times, accurate masses and characteristic MS/MS fragment patterns. Forty-four volatile components were characterized by GC–MS through NIST database matching. In the further research of quantitative analysis, 40 non-volatile compounds and 17 volatile compounds were determined and successfully applied for detecting in 7 batches of SXXTN samples by high performance liquid chromatography coupled with triple-quadrupole tandem mass spectrometry (HPLC-QQQ MS) and gas chromatograph coupled with triple-quadrupole tandem mass spectrometry (GC-QQQ MS) in multiple reaction monitoring (MRM) mode, respectively. The quantitative methods were verified in linearity, precision, repeatability stability and recovery. The above results indicated that the established method was practical and reliable for synthetical quality evaluation of SXXTN. In addition, our study might supplement the chemical evidence for disclosing the material basis of its therapeutic effects.     

Improving the stability of photosystem I–based bioelectrodes for solar energy conversion

Isolated photosystem I (PSI) has been integrated into numerous technologies for solar energy conversion. Interest in PSI is a consequence of its high internal quantum efficiency, thermal stability, ease of extraction, and adaptability. While there has been success in improving performance to elevate PSI biohybrid technologies toward a practical realm, the stability of PSI bioelectrodes is also of critical importance. Commercial solar energy conversion technologies are expected to achieve lifetimes of the order of ten years; however, many research-scale PSI bioelectrodes have only been tested for tens of days. Key areas affecting PSI bioelectrode stability include the effects of reactive oxygen species, immobilization strategies, and the environment within solid-state PSI biohybrid photovoltaics. At the current state, further investigation of long-term stability is necessary in enabling the development of PSI bioelectrodes for both photoelectrochemical cells and solid-state biohybrid photovoltaics.     

Synthetic electrically driven colloids: A platform for understanding collective behavior in soft matter

The collective motion of synthetic active colloids is an emerging area of research in soft matter physics and is important both as a platform for fundamental studies ranging from non-equilibrium statistical mechanics to the basic principles of self-organization, emergent phenomena, and assembly underlying life, as well as applications in biomedicine and metamaterials. The potentially transformative nature of the field over the next decade and beyond is a topic of critical research importance. Electrokinetic active colloids represent an extremely flexible platform for the investigation and modulation of collective behavior in active matter. Here, we review progress in the past five years in electrokinetic active systems and related topics in active matter with important fundamental research and applicative potential to be investigated using electrokinetic systems.     

Surfactants – Compounds for inactivation of SARS-CoV-2 and other enveloped viruses

We provide here a general view on the interactions of surfactants with viruses, with a particular emphasis on how such interactions can be controlled and employed for inhibiting the infectivity of enveloped viruses, including coronaviruses. The aim is to provide to interested scientists from different fields, including chemistry, physics, biochemistry, and medicine, an overview of the basic properties of surfactants and (corona)viruses, which are relevant to understanding the interactions between the two. Various types of interactions between surfactant and virus are important, and they act on different components of a virus such as the lipid envelope, membrane (envelope) proteins and nucleocapsid proteins. Accordingly, this cannot be a detailed account of all relevant aspects but instead a summary that bridges between the different disciplines. We describe concepts and cover a selection of the relevant literature as an incentive for diving deeper into the relevant material. Our focus is on more recent developments around the COVID-19 pandemic caused by SARS-CoV-2, applications of surfactants against the virus, and on the potential future use of surfactants for pandemic relief. We also cover the most important aspects of the historical development of using surfactants in combatting virus infections. We conclude that surfactants are already playing very important roles in various directions of defence against viruses, either directly, as in disinfection, or as carrier components of drug delivery systems for prophylaxis or treatment. By designing tailor-made surfactants, and consequently, advanced formulations, one can expect more and more effective use of surfactants, either directly as antiviral compounds or as part of more complex formulations.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

Microwave-assisted extraction of high-molecular-weight hemicelluloses from spruce wood

Microwave-assisted extraction (MAE) at atmospheric pressure has been demonstrated as an efficient technology for the extraction of polymeric hemicelluloses from spruce sawdust. This technology was shown to be more efficient than conventional extraction. MAE leads to a high solubilization of wood and a selective extraction of hemicellulose polymers with high molecular weights. To optimize MAE, different treatment powers (125–573 W) of presoaked spruce sawdust in water and 1 M sodium hydroxide solution for a period of 60 min were tested. The yield of hemicellulose extraction increased with the microwave power in both mediums, but with a clear advantage for presoaked samples in basic medium. The characterization of extracted hemicelluloses has shown high extraction selectivity depending on the medium of impregnation of sawdust before MAE: High-molecular-mass acetylated galactoglucomannans (M_w ∼ 41 kDa) were isolated after presoaking in water and higher molecular mass arabinoglucoronoxylans (M_w ∼ 66 kDa) in basic medium.