Thermal and radiative characteristics of oxyfluoride glass singly doped with lanthanide ions

Rare earths-doped oxyfluoride glasses based on germanium oxide and lead fluoride were prepared from commercial raw materials. The glasses with general composition of 50GeO2-(50-x-y)PbO-yPbF2-xLnF3 (Ln=Pr3+-Yb3+), contained different concentrations of optically active dopants (x=0.2 mol.% and 2 mol.%) and PbF2 (y≤15 mol.%). The differential thermal analysis (DTA) was used to determine both thermal characteristic and thermal stability properties of the glasses in the function of the kind of dopant, its concentration, and a glass composition. Characteristic glass temperatures such as glass transition temperature (Tg), glass crystallization temperature (Tc) and temperature corresponding to the maximum of the crystallization rate (Tpc) were evaluated. On the basis of obtained results, the thermal stabilities of glasses under study were evaluated using various thermal stability criteria (Dietzel factor ?T, Saad-Poulain factors H' and S). It was found that the increase in rare earth fluoride contents influenced thermal characteristics when the characteristic temperatures of the individual glass was shifted towards higher values. The effect of the PbF2 content and the kind of rare earth impurity on the glass stability was observed. Absorption spectra of lanthanide-doped glasses were measured at room temperature and used to determine the phenomenological intensity parameters Ωt and next, to estimate radiative properties of lanthanide ions in this matrix. Radiative transition probabilities of luminescent states of Ln3+, branching ratios and radiative lifetimes were determined. The variation of the Ωt along the lanthanide series was presented and discussed.     

Study on rare earth electrolyte of SDC

The grain boundaries of polycrystalline oxygen ion conductors presented a blocking effect on the oxygen ionic transport across them.It was found that the apparent specific grain boundary conductivity was 2-3 orders of magnitude lower than the bulk conductivity in the temperature range of 200-500 ℃ for normal purity Ce0.85Sm0.15O1.925(SDC)with an average grain size of 320-580 nm.The apparent specific grain boundary conductivity increased with decreasing average grain size.It was found that the space charge potential was nearly independent of grain size,and the reason was analyzed.The increase of the conduction path width was resportsible for the increase in the apparent specific grain boundary conductivity.     

Luminescent properties and application of Eu3+ -activated Gd2(MoO4)3 red-emitting phosphor with pseudo-pompon shape for solid-state lighting

Eu3+ -activated Gd2(MoO4)3 pseudo-pompon-like red-emitting phosphors were prepared by solid-state method.The structure,morphology,and luminescent properties of these powder samples were investigated by X-ray diffraction (XRD),scanning electron microscopy(SEM),and fluorescent spectrophotometry,respectively.The as-obtained phosphors were single crystalline phase with orthorhombic unit cell.The particles of the powder samples had the length of 5-12 μm and width of 3-7 μm with flake shape and large surface area,which is suitable for manufacture of white LEDs.The phosphor could be efficiently excited by the incident light of 348-425 nm,well matched with the output wavelength of near-UV (In,Ga)N chip,and re-emitted an intense red light peaking at 615 nm.By combing this phosphor with a～395 nmemitting (In,Ga)N chip,a red LED was fabricated,so that the applicability of this novel phosphor to white LEDs was confirmed.It is considered to be an efficient red-emitting conversion phosphor for solid-state lighting based on (In,Ga)N LEDs.     

High-pressure scheelite-type polymorph of SmCrO4: synthesis, structural characterization and magnetic properties

The new scheelite form of SmCrO4 oxide was obtained by heating the zircon-type SmCrO4 oxide at 4 GPa and 803 K.X-ray diffraction revealed that this scheelite SmCrO4 phase crystallized with tetragonal symmetry,S.G.141/a and lattice parameters:a=0.50776(3)nm and c=1.15606(2)nm.This structural phase transition from zircon to scheelite involved a decreasing of around 10% in the unit cell volume.Although the Cr-O and Sm-O distances did not change very much in both zircon and scheelite polymorphs,the changes occurred in the bond angles were remarkable that appear to support the proposed reconstructive model to explain this structural zircon-scheelite phase transition.Magnetic susceptibility and magnetization measurements revealed that the scheelite SmCrO4 oxide behaved an antiferromagnetic material,where the Sm3+and Cr5+were simultaneously ordered.The estimated Neel temperature,TN,was 16 K and the critical field at 12 K associated with the memmagnetic transition was 3.2 T.     

Process optimization of electroless copper plating and its influence on electrochemical properties of AB5-type hydrogen storage alloy

The amount of Cu coating by chemical plating was investigated based on quadratic regression orthogonal experimental design being adapted to the variation law of temperature,pH value and Ni2+concentration,and the relevant regression equation was expressed as y=2.1609+0.5295×10-3T2-0.0342P2-0.0265N2+0.0023TP+0.0020TH+0.0199PN-0.0959T+0.3814P-0.2073N.The results showed that the deposition rate augmented with the increasing in temperature,pH value and Ni2+concentration.The experimental parameters of the optimal coating were temperature 75 ℃,pH value 8.5 and Ni2+concentration 1.2 g/L.The electrochemical tests indicated that the cycle stability increased from 60.66% to 75.58%,indicating that the treated alloy exhibited better corrosion resistance.     

Non-Metallic Inclusions in HSLA Steel-Origin,Detection and Refractory Systems to Improve Cleanness

HSLA steels need extremely low levels of tramp elements like P,S,H and O t.During tapping the steel is deoxidized with aluminum and in the secondary metallurgy sulphur (< 10 ppm) and hydrogen (< 1 ppm) are extracted.After tank degassing the steel is strongly Ca-treated by wire feeding to form CaS instead of MnS.Non-metallic inclusions in the steel and centre segregation with MnS are sinks for hydrogen which result in HIC (Hydrogen Induced Cracking).Therefore these steels ask for excellent oxide cleanness and S-contents of < 10 ppm.Macro inclusions of > 50 μm are harmful for the product.These large inclusions are seldom and difficult to be detected.Small inclusions of < 15 μm do no harm to the product.The origin of non-metallic inclusions is,roughly spoken,one third each of de-oxidation-/reoxidation products,refractory and casting powder.Slag carry-over is mainly avoided by sensitive electronic devices.Slag covers and shrouding systems of the steel stream during the transfer of metal between ladle,tundish and mold are effective to avoid reoxidation.Systems to control the flow of steel in tundish and mold favor the floatation of inclusions and their even distribution in the strand.     

Study on the Characteristics of Fluid Flow in Stirring Vessel of New Type Stirring of KR Desulphurization

Aimed at the problem of short life of mixing head in KR mechanical mixing method for desulfurization of hot metal,a new type of mixing stir was proposed.CFD theory was used to simulate the characteristics of the fluid flow for the new type of stirring vessel of water model for KR mechanical desulfurization.Flow characteristics and structures of the flow field were investigated and compared with the traditional cross-flow type.The results show that the new type of impeller can not only improve the defects of the flow caused by stir structure of the traditional type,but also reduce the separation of mixing zone in the stirred tank and make the flow field more uniform to make the desulfurization more fully,thus shortening the mixing time,and improving the life of mixing head.Numerical simulation method has been proven to be sound by comparing with the experimental ones.     

电锌大型玻璃钢电解槽的设计

新型聚脂玻璃钢电解槽在电锌的成功应用,解决了过去老式电解槽渗漏、变形、产能低等问题,给电锌行业提供了很好的借鉴经验.     

天铁热力风机升级改造方案设计

通过对天铁集团高炉现状、风机现状的分析,提出了对热力厂风机升级改造的规划,确定了实施方案.该方案实施后将彻底改变风机渐进式改造的现象,使新高炉的备用机组发挥更大的作用,可增加现有高炉的风压、风量,使现有高炉的产量、冶炼强度进一步提高.     

Access数据库在采购管理中的应用

介绍了Access数据库的特点和优点,在采购管理中应用的意义.使用Access编写了<供应仓储管理系统>,论述了该系统的设计思想、程序结构及应用效果.该系统的应用,减轻了工作人员劳动强度、提高了工作效率、确保了物资及时供应、减少了资金的占压.     

灰铸铁手工电弧焊的焊补

介绍了铸件在制造和使用过程中出现的各种缺陷和损坏,利用手工电弧焊焊补,从灰铸铁的鉴别,焊接性能出发,对焊补方法及操作技能做了深入分析,在生产中实践取得较好的社会经济效益.     

铁路信号微机联锁动态安全型继电器的制作

微机联锁系统接口用的动态安全型继电器是确保系统安全运行的主要设备.购买所需集成电路片和电子元件,自己动手设计制作,不但成本低,可以满足故障抢修急需,而且还可以提高铁路信号维护人员的技术水平.     

结晶器调宽控制系统在济钢ASP连铸机中的应用

介绍了济钢第三炼钢厂2号ASP连铸机结晶器自动调宽控制系统,对系统的构造、功能、控制原理进行了阐述,结晶器自动调宽控制系统的应用,提高了连铸机的作业率和板坯品质.     

鞍钢冷轧厂2号生产线钢板表面质量的优化

为了提高鞍钢新轧钢公司冷轧厂2号生产线的产品质量,结合生产实践,对影响产品表面质量的因素进行了分析研究,采取了一系列措施,对各因素进行了优化,使产品表面质量得到了大幅度改善,冷轧卷清洗后的反射率达到了92%.     

Recent progress report on DNA B-Z transition modulated by rare earth-amino acid complex and Alzheimer's disease amyloid beta

Rare earth dements have unique physical, magnetic, luminescent and catalytic properties. They have been successfully used as medicine and probes in luminescent resonance energy transfer (LRET) for bioassays, as well as reagents for diagnosis in magnetic resonance imaging (MRI). In this progress report, we will focus on recent progress on how rare earth amino complexes bind to DNA and change DNA structure, especially on DNA B-Z transition induced by rare earth amino acid complex and its potential impact on Alzheimer's disease (AD).     

Numerical Simulation on Inclusion and Bubble Entrapment in Solidified Shell in Model Experiment and in Mold of Continuous Caster With DC Magnetic Field

A model experiment investigating entrapment of inclusions and bubbles on the solidified shell was performed using molten steel,and the conditions for inclusion and bubble entrapment and mechanism of entrapment were studied.The results were applied to the flow behavior in the casting mold of a continuous caster.At the solid-liquid interface,entrapment of inclusions is greatly reduced by the existence of a low velocity flow,e.g.,0.05m/s.The above-mentioned interfacial flow velocity dependency of inclusion entrapment is considered to be largely influenced by changes in the thickness of the concentration boundary layer,which depend on the interfacial flow velocity.Specifically,bubbles and inclusions which enter the concentration boundary layer are drawn to the solid-liquid interface by a suction force which is several orders larger than the Saffman’s force.In addition to the above-mentioned suction force,the so-called cleaning effect is determined by fluid-dynamic forces such as drag force,etc.which act on particles,and furthermore,by resident time of particles at the solid-liquid interface,which depends on the solidification rate.In a FC mold with a 2-stage electromagnetic brake,flotation of bubbles entrained in the jet flow from the nozzle is accelerated with the large DC magnetic field.This is attributed to the braking effect of the DC field on the nozzle jet and the upward flow by the buoyancy of the bubbles.As a result,the interfacial flow velocity can be normalized by increasing the strength of the magnetic field,and entrapment of large bubbles and inclusions can be reduced.     

干熄焦生产操作方法的分析及优化

结合干熄焦的实际生产操作,对干熄焦工艺中焦炭物流、气体循环及锅炉系统中一些容易忽视的问题进行探讨,对一些不规范的操作方法的危害性进行分析,并提出改进的措施.     

我国民事诉讼中的司法鉴定制度之立法缺陷及其完善

由于立法的简略,致使司法鉴定在民事诉讼的实际操作中存在许多问题.拟在对我国民事诉讼中司法鉴定制度存在的立法缺陷和司法鉴定在司法实践中存在的诸多问题进行分析的基础上,提出完善我国民事诉讼司法鉴定制度的相关设想.     

金电解与溶剂萃取精炼工艺比较分析

介绍了金电解与溶剂萃取两种工艺的原则流程;对两种工艺在原料的适应性、过程控制、工艺设备及配置、主要技术经济指标及投资等方面进行了比较分析.     

Experimental Research of External Desulfurization in Situ Mechanical Stirring

This paper presents a new idea about desulfurization with in-situ mechanical stirring method on the basis of desulfurization by single blow grain magnesium and KR method, that is, the inner gases carry the magnesium vapor formed in-site in molten iron by magnesium-based desulfurization, and bubble dispersed and disintegrated under the condition of mechanical stirring, thence to improve the efficiency of desulfurization by single blow grain magnesium .It has been proved by research of cold water model experiment that the bubble dispersion and disintegration can not only improve the desulphurization efficiency but also increase the utilization rate of magnesium. Obviously, the bubble dispersion and disintegration of magnesium vapor is the key problem in improving the desulphurization efficiency and increasing the utilization rate of magnesium. Thus the research focus on exploring the performance of bubble dispersion and disintegration on the base of refining process and gas-liquid mass transfer. According to the literature and cold water model experimental result basing on principle of similitude, the influencing factors and interaction of bubble dispersion and disintegration have been studied from the perspectives of physical and numerical simulation. The study would provide the theoretical and experimental data for the new method of desulfurization with in-situ mechanical stirring.