Synthesis,Surface Properties,and Antibacterial Activity of Novel Ester-Containing Cationic Silicone Surfactants and Their Utilization as Fabric-Finishing Agents

In this study, a series of cationic silicone surfactants SiQC_nCl containing ester groups and double long-chain alkyls (n = 9, 11, 13, 15, and 17) were synthesized by microwave irradiation and characterized using infrared Fourier transform (FTIR), ¹H nuclear magnetic resonance (¹H NMR), and thermogravimetric analysis (TGA). Surface activity and adsorption of these surfactants were investigated by measuring the equilibrium surface tension. The critical micelle concentration (CMC) decreased with increasing alkyl length of SiQC_nCl at 25 °C and so did the corresponding surface tension at the CMC (γ_CMC ). The aggregation behavior in aqueous solutions was also investigated systemically through transmission electron microscopy (TEM) and dynamic light scattering (DLS). Spherical or ellipsoidal-like aggregates with diameters ranging from 300 to 900 nm were observed. It is also shown that the cationic silicone surfactants exhibit certain antibacterial properties against Staphylococcus aureus but slightly poor to Escherichia coli. The morphological structure of SiQC₁₅Cl-treated cotton fabrics was observed using scanning electron microscopy (SEM), which showed that the surface became neat and smooth. What is more, the finished cotton fabrics maintained some antibacterial properties with improved softness, which may provide a more comfortable and healthy lifestyle. This work may also be helpful to the design and application of functional cationic silicone surfactants.     

Surface Activity Properties and Aggregation Behaviors of Partially Fluorinated Gemini Surfactants in Aqueous Solution

The surface activity and aggregation behavior of partially fluorinated gemini surfactant N,N′‐bis(3‐perfluorohexyl‐2‐hydroxypropyl)‐N,N′‐dipropanesulfonylhexylenediamine (N‐6‐Sul) was studied by surface tension, resonance light scattering and fluorescence spectra measurements. The critical micelle concentration (CMC) values obtained by the three methods are in good agreement. The surface activity parameters such as the effectiveness of surface tension reduction (Π_cmc), the maximum surface excess concentration (Γ_max) and the minimum surface area per molecule (A_min) were obtained through surface tension curves. The effects of pH, inorganic salts and temperature on the surface activity were also investigated. The morphology and size of the aggregates of N‐6‐Sul were examined by transmission electron microscopy (TEM). The results show that the partially fluorinated gemini surfactant N‐6‐Sul has many advantages such as high surface activity, low CMC value, great salt tolerance and temperature resistance.     

Mixed Stability and Antimicrobial Properties of Gluconamide-Type Cationic Surfactants

The stability of anionic-cationic surfactant solutions and the antimicrobial properties of novel N,N-dimethyl-N-[3-(gluconamide/lactobionamide)]propyl-N-alkylammonium bromides (CnDGPB and CnDLPB), N-methyl-N-hydroxyethyl group-N-[3-(gluconamide)-propyl]-N-alkylammonium bromide (CnMHGPB) and star-shaped gluconamide-type cationic surfactants N-dodecyl-N,N-bis[(3-d-gluconylamido)propyl]-N-alkylammonium bromide (CnDBGB) were investigated. Mixed stability in combination with sodium n-alkylbenzenesulfonate (LAS) was determined via transmittance; stability is achieved when percent transmittance was greater than 90 %. Transmittance results suggest that these cationic surfactants can form stable solutions with anionic surfactants over a broad concentration range. The inhibition activity of C _n DBGB is the best among the three kinds of glucocationic surfactants. Antimicrobial activity of C₁₂ surfactants was the best, C₁₄ was the second and C₁₀ was the worst. Moreover, antibacterial activity of glucose-based cationic surfactants was greater than lactose-based cationic surfactants.     

Aggregation and Thermodynamic Properties of Some Cationic Gemini Surfactants

In this study, the gemini surfactants of the alkanediyl-α-ω-bis(alkyl dimethyl ammonium) dibromide type, on the one hand, with different alkyl groups containing m carbon atoms and an ethanediyl spacer, referred to as “m-2-m” (m = 10, 12 and 16) and, on the other hand, with n-C₁₆ alkyl groups and different spacers containing s carbon atoms, referred to as “16-s-16” (s = 2, 6, 10 and Ar (8)) have been synthesized, purified and characterized. The critical micelle concentration (CMC), micelle ionization degree (α) and Gibbs free energy of micellization (∆G _mic) of these surfactants and the monomeric cationic surfactants DTAB and CTAB have been determined by means of electric conductivity measurements. In addition, the temperature dependence of the CMC was determined for the 10-2-10 gemini surfactant. The CMCs of the gemini surfactants are found to be much lower than those of the corresponding monomeric surfactants and the effect of the hydrophobic alkyl chain length is more important than that of the spacer. The CMC of 16-s-16 passes through a maximum of (or around) s = 6 and then decreases for s = 10. The presence of a maximum CMC is explained by the contribution of a change of conformation of the surfactant with increasing spacer chain length. The changes of α with s and m are found qualitatively similar to those found for CMC values. The values of ∆G _mic are more negative for the dimers than for the monomers and also change with an increasing spacer carbon number, as CMC values do. The thermodynamic parameters of micellization indicate that the micellization of 10-2-10 is enthalpy driven.     

The Effects of Amide Bonds and Aromatic Rings on the Surface Properties and Antimicrobial Activity of Cationic Surfactants

The cationic surfactants containing aromatic rings and amide bonds, N,N-dimethyl-N-dodecyl-2-pyrimidinylcarbamoylmethyl ammonium chloride ( a ), N,N-dimethyl-N-dodecyl-2-thiazolylcarbamoylmethyl ammonium chloride ( b ), and N,N-dimethyl-N-dodecyl-phenylcarbamoylmethyl ammonium chloride ( c ), were synthesized and characterized. The surface tension and conductivity values were employed to investigate the absorption and micellization behavior of the three cationic surfactants. The results showed that the synthesized surfactants have shown a low critical micelle concentration (CMC) and a high adsorption efficiency (pC₂₀) compared with the traditional cationic surfactant of N,N-dimethyl-N-dodecyl-N-benzyl ammonium chloride ( BAC-12 ). The aromatic rings of the a , b , and c molecular structures were analyzed using the ¹H NMR spectra for electrostatic repulsion effects between hydrophilic headgroups. The size distribution of the micelles was derived using dynamic light scattering (DLS) techniques. In addition, the foaming ability of a , b , c , and BAC-12 was investigated and the antimicrobial activity of a , b , c , and BAC-12 against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis was examined. The effects of amide bonds and aromatic rings on the surface properties and antimicrobial activity of a , b , and c were analyzed and compared with BAC-12 of the same alkyl chain length. The synthesized surfactants exhibited a high surface ability and better antibacterial activity compared with BAC-12 .     

Synthesis and Properties of New Cleavable Cationic Surfactants Containing Carbonate Groups

A novel series of cleavable alkyltrimethylammonium surfactants with different hydrocarbon chain lengths (C8–16) were synthesized. A carbonate break site inserted between the polar head and the hydrocarbon chain makes these compounds hydrolyzable. The reagents used are renewable, (bio)degradable, or reusable. The hydrolysis of these cleavable surfactants will lead to the generation of fatty alcohols and choline, which is an essential biological nutrient. The surface activities in aqueous solution of the synthesized carbonates fulfill the requirement of being good surfactants. In addition, the cleavable compounds containing n-decyl and n-dodecyl chains showed similar or higher antimicrobial activities when compared to a non-cleavable analog.     

硅氧烷表面活性剂：（Ⅰ）结构,特性和合成（待续）

硅氧烷表面活性剂是最成功的一组表面活性剂,它们优异的表面活性不仅在水体系中,而且还存在有机介质中。系统介绍了这类表面活性剂结构、分类、基本特性和合成路线。     

Syntheses and Characterization of Some Cationic Surfactants

A series of novel cationic surfactants were synthesized from the quaternization of triethyl amine and various long chain alkyl halide. The chemical structure of the prepared compounds was confirmed using elemental analysis, FTIR and ¹H-NMR spectra. The physical properties of the synthesized surfactants including, electrical conductivity, critical micelle concentration, (CMC) and the degree of ionization of the micelle, (β) were studied. The thermodynamic parameters of micelle formation, standard free energy ΔG _m°, enthalpy ΔH _m°, and entropy ΔS _m° were calculated. The results of the surface parameter determination were correlated with their chemical structures. It was found that the hydrocarbon chain length is the main factor which has an effect on the value of the thermodynamic parameters.

Micellar and Interfacial Behavior of Cationic Benzalkonium Chloride and Nonionic Polyoxyethylene Alkyl Ether Based Mixed Surfactant Systems

Micellar and interfacial properties of mixed surfactant systems comprising benzalkonium chloride, a cationic surfactant and nonionic polyoxyethylene alkyl ether surfactants (POE: C₁₀E₇, C₁₀E₈, C₁₀E₉, C₁₀E₁₀) have been investigated by surface tension, fluorescence and dynamic light scattering techniques. Critical micelle concentration (CMC) for different mixing mole fractions has been investigated by surface tension and fluorescence measurements. Ideal CMC, mixed micellar composition (X ₁ ^m , X ₁ ^σ ), interaction parameters for mixed micelles (β ^m) and adsorption monolayer (β ^σ ), surface excess concentration (Г_max), minimum area per molecule (A _min) and related thermodynamic properties have also been determined. Lowering of the CMC and negative interaction parameter values indicate synergism in the mixed micelle and monolayer formed, whereas, thermodynamic parameters evaluated for the proposed mixed systems indicate stability of the resulting micelles and monolayer. Micellar aggregation number (N _agg) and hydrodynamic diameter (D _h) computed from fluorescence and dynamic light scattering measurements respectively illustrate micellar growth in the mixed state. Results obtained for the proposed mixed systems can be helpful in designing smart materials for industrial surfactant based formulations.     

Synthesis,Surface and Antimicrobial Activities of Cationic Gemini Surfactants with Semi-Rigid Spacers

Four cationic gemini surfactants featuring semi-rigid spacers were synthesized via a two-step process. The surface-active properties of these surfactants were investigated through surface tension and electrical conductivity measurement. The thermodynamic parameters of micellization were evaluated from electrical conductivity measurements at temperatures ranging from 293 to 313 K. The aggregation behavior of these synthesized gemini surfactants in water were investigated using dynamic light scattering and transmission electron microscopy. Further, the antimicrobial activities of these synthesized gemini surfactants against both Gram-positive and Gram-negative bacteria were also investigated.     

Interactions of Polyacrylamide with Cationic Surfactants: Thermodynamic and Surface Parameters

The aggregation behaviour of two cationic surfactants, viz. cetyl trimethyl ammonium bromide (CTAB) and N-cetyl pyridinium chloride (CPC), in different concentrations of water-soluble polyacrylamide has been studied in alkaline medium by electrical conductivity and surface tension measurements. A decrease in the critical micelle concentration (CMC) of the surfactant with an increase in polymer content in the mixture was observed. The thermodynamic and surface parameters have been determined and discussed. The results indicate that micellisation becomes more favourable at higher polymer content.     

Surface,Micellar, and Aggregation Behavior of Non-cytotoxic Imidazolium Gemini Surfactants

The micellar, surface, and aggregation properties of biocompatible, imidazolium-based hydroxyl group-containing gemini surfactants, 1,1′-(propane-1,3-diyl-2-ol) bis(3-alkyl-1H-imidazol-3-ium)bromide, [C_nIm-3OH-ImC_n]Br₂, were studied. The surface parameters like maximum surface excess concentration at air/water interface (Γ_max), the minimum surface area occupied by surfactant molecules (A_min) and the related thermodynamic parameters such as, standard Gibbs free energy of micellization (), standard free energy of adsorption (), and free energy of surface at equilibrium ) were also determined from the surface parameters. The aggregation behavior has been elucidated from transmission electron microscopy (TEM) and dynamic light scattering (DLS) techniques which showed that these gemini surfactants have potential self-aggregation efficiency. Besides, some other physicochemical properties like foam stability, emulsifying power, and viscosity have been determined. The structural features of [C_nIm-3OH-ImC_n]Br₂ enhance their surface-active properties. These features of gemini surfactants are of primary significance from pharmaceutical and biomedical viewpoints. The gemini surfactants may have great implications in drug formulations and delivery owing to their prominent aggregation and non-cytotoxic nature.     

Structure and Biological Behaviors of Some Metallo Cationic Surfactants

In this study, different cationic surfactants were prepared by esterification with bromoacetic acid of different fatty alcohols, i.e., dodecyl, tetradecyl and hexadecyl species. The products were then reacted with diphenyl amine, and the resulting tertiary amines were quaternized with benzyl chloride to produce a series of quaternary ammonium salts. The metallocationic surfactants were prepared by complexing the cationic surfactants with nickel and copper chlorides. Surface tension of these surfactants were investigated at different temperatures. The surface parameters including critical micelle concentration (CMC), maximum surface excess (Γ _max), minimum surface area (A _min), efficiency (PC₂₀) and effectiveness (π _CMC) were studied. The thermodynamic parameters such as the free energy of micellization ( $\Updelta G_{\text{mic}}^{^\circ }$ ) and adsorption ( $\Updelta G_{\text{ads}}^{^\circ }$ ), enthalpy ( $\Updelta H_{\text{m}}^{^\circ }$ ), ( $\Updelta H_{\text{ads}}^{^\circ }$ ) and entropy ( $\Updelta S_{\text{m}}^{^\circ }$ ), ( $\Updelta S_{\text{ads}}^{^\circ }$ ) were calculated. FTIR spectra and ¹H-NMR spectra were obtained to confirm the compound structures and purity. In addition, the antimicrobial activities were determined via the inhibition zone diameter of the prepared compounds, which were measured against six strains of a representative group of microorganisms. The results indicate that these metallocationic surfactants exhibit good surface properties and good biological activity on a broad spectrum of microorganisms.     

Surface Properties of an Alcohol Alkoxylate in the Presence of a Cationic Surfactant

Alcohol alkoxylate was prepared via propoxylation of an industrial alcohol ethoxylate. The chemical structure of the prepared compound was confirmed using FT-IR and the physical properties were evaluated by the usual methods according to ASTM. The surface properties of the aqueous solution of alcohol alkoxylate were determined with or without addition of a cationic surfactant in comparison to the corresponding alcohol ethoxylate. The measured parameters were surface tension, CMC, maximum surface excess, minimum surface area and the interaction parameter (β). These data indicate that surface properties changed due to the attractive complex formation in the mixed system.     

Micellar Behavior of Anionic Surfactants with Sulfonate Function in Aqueous Solutions

Using different reaction conditions of photosulfochlorination of n-alkanes, various samples of anionic surfactants of sulfonates type have been obtained. Their micellar behavior was researched and the relationship between their isomeric distribution and so, their chemical structures and micellar behaviors were more thoroughly explored. Their critical micelle concentrations (CMC) were determined with surface tension measurements, the surface activities (γ_CMC) were obtained, the surface absorption amounts (Γm) and the molecular areas (Am) at the interface of air-water gained by using Gibbs’ equation. In addition, under the conditions of adding electrolyte NaCl, the critical micellar concentrations (CMCs) of two samples were also examined, and the effects of the addition of electrolyte on their micellar behaviors were studied. The experiment results show that the samples rich in secondary isomers have characteristic micellar behavior: CMC are higher, and the abilities to decrease surface tension are better, which well compared to common anionic surfactants, especially Hostapur 60, commercially available. Besides, the effects of addition of electrolyte on the micellar behaviors of the anionic surface-active agents are similar to common anionic surfactants.

季铵盐双子表面活性剂的合成和表面活性

以吗啉和溴代烷为原料,合成了两种季铵盐双子表面活性剂(m-6-m,m=10,12),并用IR和1HNMR表征了其结构。测得28℃时,12-6-12和10-6-10的表面张力(γCMC)分别为26.45 mN/m和25.55 mN/m;临界胶束浓度(CMC)分别为1.0 mmol/L和3.1 mmol/L;pC20值分别为3.48和3.03;比表面过剩(Γmax)分别为2.72×10-6mol/m2和2.80×10-6mol/m2;分子最小截面积(Amin)分别为0.611 nm2和0.593 nm2。结果表明,该季铵盐双子表面活性剂与相同离子头基及烷基链的单季铵盐表面活性剂相比,CMC低一个数量级,γCMC相差不大。     

Synthesis and Solution Properties of Novel Sugar-Based Polysiloxane Surfactants

Two sugar‐based polysiloxane surfactants with well‐defined structures, 3‐(2‐aminoethylamino)propyl functional polysiloxane glucosamide grafted (AEAPFPS‐GA) and 3‐(2‐aminoethylamino)propyl functional polysiloxane lactobionamide grafted (AEAPFPS‐LA), were successfully synthesized and characterized by FT‐IR and ¹H NMR. Their surface activities and aggregation behavior in aqueous solution were investigated by surface tension measurements, dynamic light scattering (DLS) and negative‐stain transmission electron microscopy (TEM). The surface tension measurements provided the critical micelle concentration (CMC) and the surface tension at the CMC (γ_CMC), which revealed that these two surfactants have a much higher surface activity than those of conventional hydrocarbon surfactants. DLS and TEM analysis of the two polysiloxane surfactants aqueous solutions revealed that the AEAPFPS‐GA can self‐assemble into collapsed spherical micelles, and the AEAPFPS‐LA can self‐assemble into spherical micelles.     

Retracted: Synthesis,Characterization, and Surface Activities of Polymeric Cationic Thiol Surfactants in Aqueous Medium

A series of cationic polyurethane surfactants [PQ_8-18] were synthesized by the reaction of alkyl bromoacetate (namely: octyl-, decyl-, dodecyl-, tetradecyl-, hexadecyl-, and octadecyl bromoacetate) as quaternizing agents and modified polyurethane contains tertiary amine species. Modified polyurethane was prepared by the reaction of toluene diisocyanate (TDI) and triethanol amine monomercaptoacetate. The chemical structures of the prepared surfactants were confirmed using elemental analysis, Fourier transform infrared spectroscopy (FTIR), and Proton nuclear magnetic resonance (¹H NMR) spectroscopy. The molecular weight measurements of the prepared polymers showed that the segments of each polymer contain average 10 units of the urethane-triethanol amine mercaptoacetate. The surface activities of the prepared surfactants including: surface tension (γ), effectiveness ( π_cmc), concentration at micelle formation (CMC), efficiency (Pc₂₀), maximum concentration at the interface (Γ_max), and the average area occupied by each surfactant molecule at the interface at equilibrium ( A _min) of surfactants solutions were established at 25°C. The surface tension and the critical micelle concentration values of the prepared surfactants were gradually decreased by the gradual increase of their alkyl chain length. The prepared cationic surfactants showed efficient activity as inhibitors for dissolution of carbon steel in an acidic medium and also as a biocide against the growth of bacteria, fungi, and yeast.     

Synthesis and Surface Properties of Polyether-Based Silicone Surfactants with Different Siloxane Groups

A series of polyether-based silicone surfactants with different hydrophobic chains (trimethylsiloxy, triethylsiloxy, and triisopropylsiloxy) were synthesized. The molecular structures were confirmed using ¹H nuclear magnetic resonance (NMR), ¹³C NMR, ²⁹Si NMR, and fourier transform infrared spectroscopy (FT-IR). The effect of the siloxane groups on the physicochemical properties, surface tension (γ), critical micelle concentration (CMC), surface tension at the CMC (γ_CMC ), adsorption efficiency (pC₂₀), surface pressure at the CMC (π_CMC ), maximum surface excess (Γ_max ), single silicone surfactant molecule at the air/water interface (A_min ), and the standard free energy of adsorption (), of the polyether-based silicone surfactants was investigated. Results indicate that the polyether-based silicone surfactants can reduce the surface tension of water to approximately 25–31 mN m⁻¹ and the surface activity of silicone surfactants is enhanced with increasing branched trimethylsiloxyl and sterically hindered siloxane groups.     

Studies on Solution Behavior of Aqueous Mixtures of Nonionic Polymer in Presence of Cationic Surfactants

The interactions of two gemini surfactants (16–s–16, s = 5, 6) and their conventional counterpart cetyltrimethylammonium bromide (CTAB) with polyethylene glycols (PEG 3000 and PEG 35000) have been investigated using conductivity, steady state fluorescence, viscosity and TEM techniques. The results indicate that there is no interaction between the PEG 3000/CTAB complex at lower polymer concentrations. However, a very weak interaction is observed at higher concentrations (0.5 and 1.0 wt% PEG 3000), while PEG 3000 and PEG 35000 interact with the gemini surfactants. Both critical aggregation concentration (CAC) and critical micelle concentration (CMC) increases with polymer concentration but are independent of the polymer molecular weight. From steady state fluorescence it is found that the addition of PEG results in no drastic decrease in the aggregation number (N) for all surfactants. This suggests that the atmosphere surrounding the polyion-bound micelles, with respect to the influence on the forces acting at the micelle surface, is equivalent to the counterion/water atmosphere surrounding free micelles. The relative viscosity (η _r) results show an enhancement in η _r for all the surfactants. The increase in η _r is quite significant with gemini surfactants. Polymer-surfactant interaction also depends on the polymer molecular weight. Also, the interaction seems to affect both inter polymer–polymer association as well as chain expansion. Additionally the surfactant induced changes in the polymer conformation depicted by TEM study at the micro structural level confirmed previously observed interactions determined by different analytical techniques.