First-principles study of structural,electronic and optical properties of ZnF_2

The structural, electronic, and optical properties of rutile-, CaC12-, and PdF2-ZnF2 are calculated by the plane-wave pseudopotential method within the density functional theory. The calculated equilibrium lattice constants are in reasonable agreement with the available experimental and other calculated results. The band structures show that the rutile-, CaCl2-, and PdF2-ZnF2 are all direct band insulator. The band gaps are 3.63, 3.62, and 3.36 eV, respectively. The contribution of the different bands was analyzed by the density of states. The Mulliken population analysis is performed. A mixture of covalent and weak ionic chemical bonding exists in ZnF2. Furthermore, in order to understand the optical properties of ZnF2, the dielectric function, absorption coefficient, refractive index, electronic energy loss spectroscopy, and optical reflectivity are also performed in the energy range from 0 to 30 eV. It is found that the main absorption parts locate in the UV region for ZnF2. This is the first quantitative theoretical prediction of the electronic and optical properties of ZnF2 compound, and it still awaits experimental confirmation.     

Electronic and Optical Properties of Rock-Salt AIN under High Pressure via First-Principles Analysis

Electronic and optical properties of rock-salt AIN under high pressure are investigated by first -principles method based on the plane-wave basis set. Analysis of band structures suggests that the rock-salt AIN has an indirect gap of 4.53 eV, which is in good agreement with other results. By investigating the effects of pressure on the energy gap, the different movement of conduction band at X point below and above 22.5 GPa is predicted. The optical properties including dielectric function, absorption, reflectivity, and refractive index are also calculated and analyzed. It is found that the rock-salt AIN is transparent from the partially ultra-violet to the visible light area and hardly does the transparence affected by the pressure. Furthermore, the curve of optical spectrum will shift to high energy area （blue shift） with increasing pressure.     

Structural, electronic, and optical properties of ZnOl_xSex alloys using first-principles calculations

The structural, electronic, and optical properties of binary ZnO, ZnSe compounds, and their ternary ZnOl_xSex alloys are computed using the accurate full potential linearized augmented plane wave plus local orbital （FP-LAPW ＋ lo） method in the rocksalt （B 1） and zincblende （B3） crystallographic phases. The electronic band structures, fundamental energy band gaps, and densities of states for ZnO1_xSex are evaluated in the range 0 〈 x 〈 1 using Wu-Cohen （WC） generalized gradient approximation （GGA） for the exchange-correlation potential. Our calculated results of lattice parameters and bulk modulus reveal a nonlinear variation for pseudo-binary and their ternary alloys in both phases and show a considerable deviation from Vegard＇s law. It is observed that the predicted lattice parameter and bulk modulus are in good agreement with the available experimental and theoretical data. We establish that the composition dependence of band gap is semi-metallic in B1 phase, while a direct band gap is observed in B3 phase. The calculated density of states is described by taking into account the contribution of Zn 3d, O 2p, and Se 4s, and the optical properties are studied in terms of dielectric functions, refractive index, reflectivity, and energy loss function for the B3 phase and are compared with the available experimental data.     

立方KCaF_3电子、弹性和光学性质的第一性原理研究

基于密度泛函理论和赝势平面波近似法计算研究了立方钙钛矿KCaF_3的弹性、电子和光学性质.基态时,KCaF_3平衡晶格常数、体积弹性模量和实验及其他计算值一致.根据Hooke定律和Christoffel方程,研究了KCaF_3弹性常数Cij、体积弹性模量B、各向同性波速和弹性各向性异性因子随压力的变化关系.从电子能带理论出发,计算得到了KCaF_3电子能带、态密度和Milliken电荷布居数,并对其电子性质进行了详细分析.结果显示:立方钙钛矿KCaF_3为直接带隙绝缘体材料,其禁带宽度为6.22 e V;电荷主要从Ca和K原子向F原子转移;立方钙钛矿KCaF_3属于纯粹的共价型化合物.同时,本文还计算研究了KCaF_3的光学介电函数、吸收系数、复折射率、能量损失谱和反射系数等光学性质.     

立方KCaF3电子、弹性和光学性质的第一性原理研究

基于密度泛函理论和赝势平面波近似法计算研究了立方钙钛矿KCaF3的弹性、电子和光学性质。基态时,KCaF3平衡晶格常数、体积弹性模量和其他计实验和算值一致。根据Hooke定律和Christoffel方程,研究了KCaF3弹性常数Cij、体积弹性模量B、各向同性波速和弹性各向性异性因子随压力的变化关系。从电子能带理论出发,计算得到了KCaF3电子能带、态密度和Milliken电荷布居数,并对其电子性质进行了详细分析。结果显示：立方钙钛矿KCaF3为直接带隙绝缘体材料,其禁带宽度为6.22eV;电荷主要从Ca和K原子向F原子转移;立方钙钛矿KCaF3属于纯粹的共价型化合物。同时,本文还计算研究了KCaF3的光学介电函数、吸收系数、复折射率、能量损失谱和反射系数等光学性质。     

立方钙钛矿RbZnF3电子、弹性和光学性质的第一性原理研究

基于密度泛函理论和赝势平面波方法研究了立方钙钛矿RbZnF3的电子结构和光学性质;利用静水有限应变技术计算研究了RbZnF3弹性常数Cij、体积弹性模量B和剪切模量G随压力的变化关系。基态下,RbZnF3晶格常数a和体积弹性模量B0计算值与实验值以及其他理论值一致。根据能带结构、总态密度以及分波态密度分析可知：基态下立方钙钛矿结构RbZnF3为间接带隙半导体材料,带隙为3.57eV,与其他计算结果比较,本文计算结果偏低,这是由于局域密度近似(LAD)或广义梯度近似(GGA)交换关联函数的局限性所致。基态下RbZnF3的Mulliken电荷分布和集居数说明：RbZnF3属于共价键和离子键所形成的混合键化合物;RbZnF3的电荷总数主要来源于Rb 4s和4p轨道,Zn 3d轨道,以及F 2s和2p轨道。电荷主要从Rb, Zn原子向F原子转移。同时,本文还计算研究了RbZnF3的光学介电函数、吸收系数、复折射率、能量损失谱和反射系数等光学性质。     

First-principles study of the structural,elastic, and optical properties for Sr0.5Ca0.5TiO3

A detailed theoretical study of the structural, elastic, and optical properties for Sr0.5Ca0.5TiO3 is carried out by first- principles calculations. The band structure exhibits a direct bandgap of 2.08 eV at the F point in the Brillouin zone. The bulk modulus, shear modulus, Young＇s modulus, and Poisson＇s ratio are derived based on the calculated elastic constants. The bulk modulus B = 153 GPa and shear modulus G = 81GPa are in good agreement with available experimental data. Poisson＇s ratio v = 0.275 suggests that Sr0.sCa0.sTiO3 should be classified as being a ductile material. Using the electronic band structure and density of states, we analyze the interband contribution to the optical properties. The real and imaginary parts of the dielectric function, as well as the optical properties such as the optical absorption coefficient, refractive index, extinction coefficient, and energy-loss spectrum are calculated. The static dielectric constant ε1 （0） and the refractive index n（0） are also investigated.     

LaAlO3/SrTiO3界面的电子结构及光学性质的第一性原理研究

采用基于密度泛函理论框架下的第一性原理平面波超软赝势方法,结合局域密度近似（LDA）研究了钙钛矿结构氧化物LaAlO3 /SrTiO3界面的电子结构及光学性质。能带结构分析表明当形成(AlO2)-/(TiO2)0界面时其禁带宽度为1.888 eV,呈现绝缘体的性质,当形成(LaO)+/(SrO)0界面时其禁带宽度为0.021 eV,呈现半导体或半金属性质。同时,对不同界面的光学性质也进行了研究,结果表明纯相的LaAlO3和SrTiO3的吸收系数、反射系数及能量损失谱强度明显高于由这两种单质形成不同界面的强度。     

The under-pressure behaviour of mechanical,electronic and optical properties of calcium titanate and its ground state thermoelectric response

Abstract

In this study, the elastic, electronic, optical and thermoelectric properties of CaTiO₃ perovskite oxide have been investigated using first-principles calculations. The generalised gradient approximation (GGA) has been employed for evaluating structural and elastic properties, while the modified Becke Johnson functional is used for studying the optical response of this compound. In addition to ground state physical properties, we also investigate the effects of pressure (0, 30, 60, 90 and 120 GPa) on the electronic structure of CaTiO₃. The application of pressure from 0 to 90 GPa shows that the indirect band gap (Γ-M) of CaTiO₃ increases with increasing pressure and at 120 GPa it spontaneously decreases transforming cubic CaTiO₃ to a direct (Γ-Γ) band gap material. The complex dielectric function and some optical parameters are also investigated under the application of pressures. All the calculated optical properties have been found to exhibit a shift to the higher energies with the increase of applied pressure suggesting potential optoelectronic device applications of CaTiO₃. The thermoelectric properties of CaTiO₃ have been computed at 0 GPa in terms of electrical conductivity, thermal conductivity and Seebeck coefficient.     

First-principles calculations of structural,electronic, and thermodynamic properties of ZnO_(1-x)S_x alloys

In this study the pseudo-potential method is used to investigate the structural, electronic, and thermodynamic proper- ties of ZnOl_xSx semiconductor materials. The results show that the electronic properties are found to be improved when calculated by using LDA ~ U functional as compared with local density approximation （LDA）. At various concentrations the ground-state properties are determined for bulk materials ZnO, ZnS, and their tertiary alloys in cubic zinc-blende phase. From the results, a minor difference is observed between the lattice parameters from Vegard＇s law and other calculated results, which may be due to the large mismatch between lattice parameters of binary compounds ZnO and ZnS. A small deviation in the bulk modulus from linear concentration dependence is also observed for each of these alloys. The ther- modynamic properties, including the phonon contribution to Helmholtz free energy △F, phonon contribution to internal energy △E, and specific iheat at constant-volume Cv, are calculated within quasi-harmonic approximation based on the calculated phonon dispersion relations.     

Electronic structure and optical properties of ordered compounds potassium tantalate and potassium niobate and their disordered alloys

The electronic energy band structure, site and angular momentum decomposed density of states (DOS) of cubic perovskite oxides KNbO₃ and KTaO₃ have been obtained from a first principles density functional based full potential linearized augmented plane wave (FLAPW) method within a generalized gradient approximation (GGA). The total DOS in valence region is compared with the experimental photo-emission spectra (PES). The calculated DOS is in good agreement with the experimental energy spectra and the features in the spectra are interpreted by comparison with the projected density of states (PDOS). The valence band PES is mainly composed of Nb-4d/Ta-5d and O 2p states in KNbO₃ and KTaO₃, respectively. Using the PDOS and the band structure we have analyzed the inter-band contribution to the optical properties of these materials. The real and imaginary parts of the dielectric function have been calculated and compared with experimental data. They are found to be in a reasonable agreement. The role of band structure on the optical properties have been discussed.     

Electronic structures and optical properties of IIIA-doped wurtzite Mg0.25Zn0.75O

The energy band structures, density of states, and optical properties of IliA-doped wurtzite Mg0.25Zn0.75O （IIIA= A1, Ga, In） are investigated by a first-principles method based on the density functional theory. The calculated results show that the optical bandgaps of Mg0.25Zn0.75O：IIIA are larger than those of Mg0.25Zn0.75O because of the Burstein-Moss effect and the bandgap renormalization effect. The electron effective mass values of Mg0.25Zn0.75O：IIIA are heavier than those of Mgo.25Zno.750, which is in agreement with the previous experimental result. The formation energies of MgZnO：Al and MgZnO：Ga are smaller than that of MgZnO：In, while their optical bandgaps are larger, so MgZnO：Al and MgZnO：Ga are suitable to be fabricated and used as transparent conductive oxide films in the ultra-violet （UV） and deep UV optoelectronic devices.     

Crystal structure, electrical and magnetic properties of La1 − xSrxCoO3 − y

The crystal structure and properties of La_{1 − x}Sr_xCoO_{3 − y} with strontium contents ranging from x = 0.1 to x = 0.7 have been studied. The lattice parameters were measured as a function of temperature (4.2–400 K) and the crystal structure was found to change from rhombohedral (at low temperatures and values of x) to cubic. While LaCoO₃ is paramagnetic the oxides in the composition range 0.2 < x < 0.6 are soft ferromagnets. The strontium additions are compensated by the formation of Co⁴⁺ (cobalt ions with one positive effective charge, Co_Co^.) and oxygen vacancies (V_o^..). From the results it is concluded that the relative importance of oxygen vacancies increases with increasing temperature and decreasing oxygen activity. As a result the concentration of electronic charge carriers — and the resultant electrical conductivity — decrease with increasing temperature. The defect structure is discussed and it is concluded that defect associations — probably between oxygen vacancies and strontium ions — and formation of microdomains of perovskite-related phases are important aspects of the overall structure of these perovskite phases.     

First-principles analysis of the structural,electronic, and elastic properties of cubic organic-inorganic perovskite HC(NH_2)_2PbI_3

The structural, electronic, and elastic properties of cubic HC(NH_2)_2PbI_3 perovskite are investigated by density functional theory using the Tkatchenko–Scheffler pairwise dispersion scheme. Our relaxed lattice parameters are in agreement with experimental data. The hydrogen bonding between NH_2 and I ions is found to have a crucial role in FAPbI_3 stability. The first calculated band structure shows that HC(NH_2)_2PbI_3 has a direct bandgap(1.02 eV) at R-point, lower than the bandgap(1.53 eV) of CH_3NH_3PbI_3. The calculated density of states reveals that the strong hybridization of s(Pb)–p(I) orbital in valence band maximum plays an important role in the structural stability. The photo-generated effective electron mass and hole mass at R-point along the R–Γ and R–M directions are estimated to be smaller: m_e~*= 0.06 m0 and m_h~*= 0.08 m0 respectively, which are consistent with the values experimentally observed from long range photocarrier transport. The elastic properties are also investigated for the first time, which shows that HC(NH_2)_2PbI_3 is mechanically stable and ductile and has weaker strength of the average chemical bond. This work sheds light on the understanding of applications of HC(NH_2)_2PbI_3 as the perovskite in a planar-heterojunction solar cell light absorber fabricated on flexible polymer substrates.     

First-principles calculation of the structural,electronic,and magnetic properties of cubic perovskite RbXF_3(X = Mn,V,Co,Fe)

First-principles calculations by means of the full-potential linearized augmented plane wave method using the generalized gradient approximation with correlation effect correction(GGA+U) within the framework of spin polarized density functional theory(DFT+U) are used to study the structural,electronic,and magnetic properties of cubic perovskite compounds RbXF_3(X = Mn,V,Co,and Fe).It is found that the calculated structural parameters,i.e.,lattice constant,bulk modulus,and its pressure derivative are in good agreement with the previous results.Our results reveal that the strong spin polarization of the 3d states of the X atoms is the origin of ferromagnetism in RbXF_3.Cohesive energies and the magnetic moments of RbXF_3 have also been calculated.The calculated electronic properties show the half-metallic nature of RbCoF_3 and RbFeF_3,making these materials suitable for spintronic applications.     

First-Principles Study on Electronic Structure and Half-Metallic Properties of CoNCN and NiNCN

We studied the electronic structure of the two new transition-metal carbodiimides CoNCN and NiNCN using first-principles method, which is based on density-functional theory （DFT）. The density of states （DOS）, the total energy of the cell and the spin magnetic moment of CoNCN and NiNCN were calculated. The calculations reveal that the compound CoNCN and NiNCN have hall-metallic properties in ferromagnetic ground state, and the spin magnetic moment per molecule is about 7.000 μB and 6.000 μB for CoNCN and NiNCN, respectively.     

First-Principles Study of Structural,Elastic and Electronic Properties of OsSi

First-principles study of structural, elastic, and electronic properties of the B20 structure OsSi has been reported using the plane-wave pseudopotential density functional theory method. The calculated equilibrium lattice and elastic constants are in good agreement with the experimented data and other theoretical results. The dependence of the elastic constants, the aggregate elastic modulus, the deviation from the Cauchy relation, the elastic wave velocities in different directions and the elastic anisotropy on pressure have been obtained and discussed. This could be the first quantitative theoretical prediction of the elastic properties under high pressure of OsSi compound. Moreover, the electronic structure calculations show that OsSi is a degenerate semiconductor with the gap value of 0.68 eV, which is higher than the experimental value of 0.26 eV. The analysis of the PDOS reveals that hybridization between Os d and Sip states indicates a certain covalency of the Os-Si bonds.     

N vacancy,substitutional O,and AI defects in the bandgap of composition-tunable nonstoichiometric AIN powder

AlN powders are prepared by direct nitridation via Al liquid and vapor phases in mixed atmospheres of N2 and NH3 with different NH3/N2 ratios. The reaction analysis reveals that NH3 acts as catalyst for N2 dissociation and the transportations of N, O, and Al in the liquid phase are different from those in the vapor phase. Accordingly, the products are Al-rich and composition-tunable nonstoichiometric AlN in which N, O, and Al content values change with nitridation atmosphere and temperature, leading to the variation of the relevant defect concentration. Therefore, the AlN powders exhibit prominent absorption bands around 5.30, 3.40, and 1.50 eV, which are tentatively assigned to VN, ON donors, and AlN acceptor respectively. Furthermore, a new donor named [VN-ON] complex is predicted at 4.40 eV within the 5.90 eV bandgap. It is demonstrated that the optical spectra of nonstoichiometric AlN are preferable to the nominal stoichimometric one for the identification of the defects energy level.     

Elastic and Thermodynamic Properties of CdSe from First-Principles Calculations

The lattice parameters, bulk modulus, phase transition pressure, and temperature dependencies of the elastic constants cij of CdSe are investigated by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of Density Functional Theory （DFT）. It is found that the phase transitions from the ZB structure to the RS structure and from WZ structure to RS structure are 2.2 GPa and 2.8 GPa, respectively. Our results agree well with the available experimental data and other theoretical results. The aggregate elastic modulus （B, G, E, A ）, the Poisson＇s ratio （v）, the Griuneisen parameter （γ）, the Debye temperature θD on pressure and temperature are also successfully obtained.     

Effect of Cr,Mo, and Nb additions on intergranular cohesion of ferritic stainless steel: First-principles determination

Effects of Cr, Mo, and Nb on the ferritic stainless steel ]2（210） grain boundary and intragranularity are investigated using the first-principles principle. Different positions of solute atoms are considered. Structural stability is lowered by Cr doping and enhanced by Mo and Nb doping. A ranking on the effect of solute atoms enhancing the cohesive strength of the grain boundary, from the strongest to the weakest is Cr, Mo, and Nb. Cr clearly prefers to locate in the intragranular region of Fe rather than in the grain boundary, while Mo and Nb tend to segregate to the grain boundary. Solute Mo and Nb atoms possess a strong driving force for segregation to the grain boundary from the intragranular region, which increases the grain boundary embrittlement. For Mo- and Nb-doped systems, a remarkable quantity of electrons accumulate in the region close to Mo （Nb）. Therefore, the bond strength may increase. With Cr, Mo, and Nb additions, an anti-parallel island is formed around the center of the grain boundary.