Accuracy of single-energy quantitative computed tomography in the assessment of bone mineral density of cervical vertebrae

Earlier studies have shown that single-energy quantitative computed tomography (SEQCT) is a reliable method for bone mineral density (BMD) measurements in thoracic and lumbar vertebrae. Moreover, SEQCT has proved to be a useful parameter in the selection of appropriate implants in cervical spondylodesis. The aim of this study was to determine the accuracy of SEQCT in cervical vertebrae BMD measurement. BMD with reference to calcium hydroxyapatite (Ca10[PO4]6[OH]2) was assessed by SEQCT in 100 human vertebral bodies of the cervical spine. Bone cylinders were then cut from the appropriate region of interest. The cylinder volume was determined by the liquid displacement technique. The density of the mineral component was measured following incineration at 1100 degrees C for 24 h. The calculated BMD was correlated with the SEQCT values, resulting in a coefficient of r = 0.79 (P < 0.01). Mean SEQCT values were significantly lower than those determined by direct density assessment (t-test for coupled sampling, P < 0.02). This result was in agreement with studies on thoracic and lumbar vertebrae. These data suggest that SEQCT can reliably measure BMD in the cervical spine.     

The use of image registration in the analysis of bone scans for the assessment of temporomandibular joint uptake

OBJECTIVE: To examine risk factors for chronic airway disease (CAD) in elderly nonsmokers, as determined by pulmonary function tests (PFTs), and to correlate reported respiratory symptoms with PFT measures. DESIGN: An observational survey. SETTING: Several communities in California. MEASUREMENTS: Exposures and respiratory history were assessed by standardized questionnaire. PFTs were performed and prediction equations derived. RESULTS: Significant risk factors for obstruction on PFTs in multiple logistic regression included reported environmental tobacco smoke (ETS) exposure (relative risk [RR]=1.44), parental CAD or hay fever (RR=1.47), history of childhood respiratory illness (RR=2.15), increasing age, and male sex. The number of years of past smoking was of borderline significance (RR=1.29 for 10 years of smoking; p=0.06). The prevalence of obstruction on PFTs was 24.9% in those with definite symptomatic CAD, compared with 7.5% in those with no symptoms of CAD. The prevalence of obstruction was 36.0% among those with asthma and 70.6% among those with emphysema. Also, symptomatic CAD correlated with reduction in lung function by analysis of covariance. The mean percent predicted FEV1 adjusted for covariates was 90.6% in persons with definite symptoms of CAD, compared with 97.8% in those without it (p < 0.001). CONCLUSIONS: Age, sex, parental history, childhood respiratory illness, and reported ETS exposures were significant risk factors for obstruction on PFTs. Self-reported respiratory symptoms also correlated significantly with PFTs.     

The application of quantitative risk assessment to microbial food safety

Quantitative risk assessment (QRA) is rapidly accumulating recognition as the most practical method for assessing the risks associated with microbial contamination of foodstuffs. These risk analyses are most commonly developed in commercial computer spreadsheet applications, combined with Monte Carlo simulation add-ins that enable probability distributions to be inserted into a spreadsheet. If a suitable model structure can be defined and all of the variables within that model reasonably quantified, a QRA will demonstrate the sensitivity of the severity of the risk to each stage in the risk-assessment model. It can therefore provide guidance for the selection of appropriate risk-reduction measures and a quantitative assessment of the benefits and costs of these proposed measures. However, very few reports explaining QRA models have been submitted for publication in this area. There is, therefore, little guidance available to those who intend to embark on a full microbial QRA. This paper looks at a number of modeling techniques that can help produce more realistic and accurate Monte Carlo simulation models. The use and limitations of several distributions important to microbial risk assessment are explained. Some simple techniques specific to Monte Carlo simulation modelling of microbial risks using spreadsheets are also offered which will help the analyst more realistically reflect the uncertain nature of the scenarios being modeled. simulation, food safety.     

The use of health indicators in environmental assessment

Environmental assessment (EA) is required in Canadian federal and provincial jurisdictions as part of the process for decision-making on the acceptability of development projects. With increasing recognition of the relationship between environment and health, assessing "health" impact has growing importance. This paper presents the framework that is being developed by the World Health Organization (WHO) for addressing environmental health indicators, reports on the findings of a series of five regional workshops held in 1995-96 to examine the role of health professionals in environmental assessment in Canada, and presents a case study illustrating how human health has been addressed in a prominent EA conduct in northern Saskatchewan. Opportunities for future development of environmental health indicators are considered, with special reference to the potential use of medical data to address these challenges.     

The linearized multistage model and the future of quantitative risk assessment

The linearized multistage (LMS) model has for over 15 years been the default dose-response model used by the U.S. Environmental Protection Agency (USEPA) and other federal and state regulatory agencies in the United States for calculating quantitative estimates of low-dose carcinogenic risks from animal data. The LMS model is in essence a flexible statistical model that can describe both linear and non-linear dose-response patterns, and that produces an upper confidence bound on the linear low-dose slope of the dose-response curve. Unlike its namesake, the Armitage-Doll multistage model, the parameters of the LMS do not correspond to actual physiological phenomena. Thus the LMS is 'biological' only to the extent that the true biological dose response is linear at low dose and that low-dose slope is reflected in the experimental data. If the true dose response is non-linear the LMS upper bound may overestimate the true risk by many orders of magnitude. However, competing low-dose extrapolation models, including those derived from 'biologically-based models' that are capable of incorporating additional biological information, have not shown evidence to date of being able to produce quantitative estimates of low-dose risks that are any more accurate than those obtained from the LMS model. Further, even if these attempts were successful, the extent to which more accurate estimates of low-dose risks in a test animal species would translate into improved estimates of human risk is questionable. Thus, it does not appear possible at present to develop a quantitative approach that would be generally applicable and that would offer significant improvements upon the crude bounding estimates of the type provided by the LMS model. Draft USEPA guidelines for cancer risk assessment incorporate an approach similar to the LMS for carcinogens having a linear mode of action. However, under these guidelines quantitative estimates of low-dose risks would not be developed for carcinogens having a non-linear mode of action; instead dose-response modelling would be used in the experimental range to calculate an LED10* (a statistical lower bound on the dose corresponding to a 10% increase in risk), and safety factors would be applied to the LED10* to determine acceptable exposure levels for humans. This approach is very similar to the one presently used by USEPA for non-carcinogens. Rather than using one approach for carcinogens believed to have a linear mode of action and a different approach for all other health effects, it is suggested herein that it would be more appropriate to use an approach conceptually similar to the 'LED10*-safety factor' approach for all health effects, and not to routinely develop quantitative risk estimates from animal data.     

The morphological assessment of bone marrow infiltration in neuroblastoma]

BACKGROUND: The purpose of this study was to describe the relationship between breastfeeding intention among socioeconomically disadvantaged pregnant women and maternal demographics, previous breastfeeding experience, and social support. METHODS: A cross-sectional, convenience sampling strategy was employed for data collection. Low-income women (n = 1001) in a public hospital completed a six-page questionnaire about their infant feeding plans, demographics, and social support. Simple regression analyses were conducted to compare maternal breastfeeding intention with the hypothesized correlates. RESULTS: Breastfeeding intention was positively correlated with older maternal age, higher education, more breastfeeding experience, Hispanic ethnicity, and hearing about breastfeeding benefits from family members, the baby's father, and lactation consultants, but not from other health professionals. Health professionals' attitudes were less influential on women's infant feeding decisions than the attitudes and beliefs of members of women's social support networks. When controlling for breastfeeding experience (none vs any), some findings, varied, indicating a need for breastfeeding interventions tailored to women's level of experience. CONCLUSION: Use of peer counselors and lactation consultants, inclusion of a woman's family members in breastfeeding educational contacts, and creation of breastfeeding classes tailored to influential members of women's social support networks may improve breastfeeding rates among low-income women, especially those with no breastfeeding experience, more effectively than breastfeeding education to pregnant women that is solely conducted by health professionals.     

The use of reference materials in quantitative analyses based on FT-Raman spectroscopy

The reliability with which an external reference sample can be used to standardise the intensities of Raman scattering spectra is assessed. By comparing the ratios of single band intensities of Raman scatter in a two component liquid mixture with those between the mixture and an external standard it is shown that the latter is more than adequate for most quantitative Raman analysis. Coefficients of variance in repeated experiments on the same sample are approximately 1%, when comparing single band heights on spectra recorded with modest laser powers over 2 min. When using the whole spectrum, these coefficients are significantly lower.     

Clinical use of bone allografts

Modern techniques of bone allograft surgery provide a treatment modality for management of difficult skeletal defects. In oncological limb-salvage surgery, allograft reconstructions permit re-establishment of skeletal continuity and function after a wide resection of bone tumour. Bone allografts are increasingly used in salvage of difficult bone stock deficiencies following failed total joint replacements. Union between the allograft and the host bone takes place slowly and the use of autogenous bone graft at the graft-host junction is recommended for induction of repair. Internal repair (revascularization and substitution of the original graft bone with new host bone) also progresses slowly and seems to be confined only to the superficial surface and the ends of the graft. Biomechanically, a massive allograft may serve a structural function in the absence of advanced revascularization and creeping substitution processes. Infection of an allograft is a disastrous complication, whereas non-union of the graft-host junction and fracture of the graft are amenable to surgical treatment. Osteochondral allografts tend to show gradual deterioration of the articular cartilage with time, necessitating occasionally late resurfacing arthroplasty. It is evident that there is more active immune response to osteochondral grafts than was thought previously. Bone allografts induce cell-mediated and antibody-mediated cytotoxicity specific for donor antigens similar to that seen after organ transplantations. Not only the basic mechanisms of bone allograft rejection but also the clinical features of bone allograft rejection are poorly characterized. Clinically, new non-invasive imaging techniques should be applied in determining the metabolic activity of bone in order to find the optimal loading of healing allografts. Although the clinical results of massive bone allografts are still not completely predictable, the method has proved to be a technically and biologically feasible alternative for non-biological skeletal reconstructions.     

Prediction of bone loss in patients with primary hyperparathyroidism using quantitative bone SPECT

Bone loss is a major complication of primary hyperparathyroidism (PHPT), and it has significant implications in the treatment of this disease. Bone turnover was measured in patients with PHPT, using quantitative bone SPECT (QBS), to determine if the rate of bone loss could be predicted before a significant decrease in bone mass occurs. METHODS: Forty-six patients were included in the study. QBS and bone mineral density (BMD) of the lumbar spine (LS) and femoral neck (FN) were done at baseline. The percent deviation of QBS in patients with PHPT from the values in normal matched controls was calculated. BMD was measured again after a mean of 17.5 mo in 38 patients, and in 29 patients a repeat BMD study was done after a mean of 41.4 mo. The change in BMD in patients with high and normal QBS values was compared using the nonparametric Mann-Whitney test. Regression analysis tested the correlation between baseline QBS values and BMD changes over time. RESULTS: For the FN, there was a statistically significant difference in the BMD change between patients with high and normal QBS values for short-term follow-up (-2.82%+/-4.80% versus 1.45%+/-4.67%, p < 0.05) and for long-term follow-up (-3.53%+/-5.34% versus 0.92%+/-2.40, p < 0.02). There was a negative correlation in the FN, r=-0.48 between QBS values and the percentage of change in BMD. There was no significant difference between the percentage of change in BMD in the LS in patients with high and normal QBS values for either short- or long-term follow-up. CONCLUSION: The results of this study show that QBS can predict bone loss in the FN in patients with PHPT. QBS can thus indicate the need for surgery at an early stage of the disease to prevent bone loss.     

Ultrasonic assessment of bone: a review

In the last 25 years several non-invasive techniques based on the attenuation of ionizing radiation have been developed to quantify bone mineral density in the axial and peripheral skeleton. The use of ultrasounds is another technique which has recently been developed to provide information on the architecture and elasticity of bone. The basic principle of ultrasound measurements is that the speed (SOS = speed of sound) at which ultrasounds propagate in the bone, or the extent of their attenuation (BUA = broad-band ultrasound attenuation) through the bone is determined by bone density and by certain physical properties which are intimately correlated with bone strength. Theoretically, ultrasound bone measurements should provide more information about bone fragility and structure than densitometric techniques. As a result of preliminary studies, several ultrasound devices have been developed by manufacturers. Most of them measure the os calcis which consists almost exclusively of trabecular bone. Measurement precision varies with the instrument used and the site of measurement. The in vitro and in vivo precision for SOS and for BUA are reported in this review. The correlations between ultrasound and bone mineral density measurement suggest that these techniques measure different entities. A significant difference is constantly found between normal and osteoporotic women. Transversal studies have shown a negative correlation between ultrasound measurements and age. Age-related variations are much more significant with BUA than with SOS. Several studies suggest the potential of ultrasound measurements to assess the risk for individuals to develop osteoporosis and its usefulness in treatment follow-up. Further prospective studies are needed to better understand the effectiveness of ultrasounds.(ABSTRACT TRUNCATED AT 250 WORDS)     

The use of demineralized laminar bone sheets in guided bone regeneration procedures: report of three cases

We have studied the time course of recovery after administration of edrophonium during intense mivacurium block in children aged 2-10 yr, using thumb acceleration in response to train-of-four (TOF) stimulation. Forty-three children receiving alfentanil, propofol, nitrous oxide, isoflurane anaesthesia and mivacurium 0.2 mg kg-1 were allocated randomly to one of three groups. Patients in group 1 (n = 15) received edrophonium 1 mg kg-1, 2 min after maximum block (intense block group). At the time of administration of edrophonium in this group, there was no response to TOF stimulation (100% block) and the post-tetanic count was 10.7 (range 0-20). Patients in group 2 received the same dose of edrophonium after 10% recovery of the first twitch (T1) in the TOF (conventional reversal). Patients in group 3 (n = 13) recovered spontaneously. All patients developed complete suppression of twitch height in response to the bolus dose of mivacurium. All recovery times were measured from the point of maximum block after mivacurium. Mean time for 25% recovery of T1 (clinical duration) was 3.8 (SD 1.1) min in the intense block group. This was significantly shorter than the conventional reversal (8.3 (2.4) min) and spontaneous recovery (9.2 (3.5) min) groups (P < 0.001). The times for 75% and 90% recovery of T1 were shorter in the intense block group (9.4 (2.8), 12.3 (4.2) min) compared with the conventional (13.1 (3.8), 17.3 (4.8) min) and spontaneous recovery (14.9 (4.5), 17.9 (5.2) min) groups (P < 0.01). Total recovery time required for 70% recovery of the TOF ratio (T4/T1) was 8.8 (2.4) min in the intense block group. This was significantly shorter than the conventional reversal (11.9 (3.2) min) (P < 0.05) and spontaneous recovery (17.1 (4.0) min) groups (P < 0.001). Conventional reversal was associated with a shorter total recovery time compared with spontaneous recovery (P < 0.01). The recovery index (time interval between T1 25% and 75%) was comparable in groups 1-3 (5.5 (2.0), 4.8 (2.1) and 5.7 (1.4) min respectively). Ten minutes after development of maximum block, the numbers of patients who recovered adequately (TOF ratio 70% or more) were, respectively, 12 (80%), 8 (53%) and 1 (8%) in groups 1-3. We conclude that edrophonium antagonized intense (no response to TOF stimulation) mivacurium-induced block in children, with significant reduction in the recovery times of T1 and TOF ratio compared with conventional reversal and spontaneous recovery.     

The use of the 'binormal' model for parametric ROC analysis of quantitative diagnostic tests

The binormal model is widely used for parametric receiver operating characteristic (ROC) analyses of data concerning the accuracy of medical diagnostic tests. Empirical evaluation of the performance of this model in the face of departures from binormality has been limited to interpretations of radiology-type examinations recorded on a rating scale. This paper extends the investigation to the performance of the model with biochemical and other tests recorded on an interval scale. In order to describe non-binormal pairs of distributions, a useful standardized graphical display is developed; this display also illustrates several features of ROC curves. We consider non-binormal pairs of distributions with or without a monotone likelihood ratio and show that by transformation of the underlying scale, one can make many such pairs resemble closely the binormal model. These findings justify Metz's use of the binormal model in the 'LABROC' software for ROC analyses of laboratory type data even when the raw data may 'look' decidedly non-Gaussian.     

The results of questionnaire on quantitative assessment of 123I-metaiodobenzylguanidine myocardial scintigraphy in heart failure

This study was done by working group under the cooperation between Japanese Society of Nuclear Medicine and Japanese Circulation Society. We evaluated the usefulness of quantitative assessment of 123I-metaiodobenzylguanidine (MIBG) myocardial scintigraphy in heart failure by the results of questionnaire. Forty-nine (72.1%) of 68 selected institutions participated in this study. The incidence of MIBG myocardial scintigraphy used in heart failure was 41.1%. The imaging protocol was mostly done by both planar and SPECT at 15 min and 3.6 hr after intravenous injection of 111 MBq of MIBG. The quantitative assessment was mostly done by heart/mediastinum (H/M) ratio and washout rate analysis based on planar imaging. The mean normal value of H/M ratio were 2.34 +/- 0.36, and 2.49 +/- 0.40, at early and delayed images, respectively. The normal value of washout rate was 27.74 +/- 5.34%. On the other hand, those of H/M ratio in heart failure were 1.87 +/- 0.27, and 1.75 +/- 0.24, at early and delayed images, respectively. That of washout rate was 42.30 +/- 6.75%. These parameters were very useful for the evaluation of heart failure. In conclusion, MIBG myocardial scintigraphy was widely used for not only early detection and severity assessment, but also indication for therapy and prognosis evaluation in heart failure patients.     

The utility of three-phase bone scintigraphy in the assessment of fractured carpal scaphoid

Thirty-seven joints in 36 patients with a fractured carpal scaphoid were evaluated by three-phase bone scintigraphy. They were classified into two groups according to their progress. Some were in good clinical condition and some in a non-union condition. Increased blood flow in the radial arteries and ample perfusion on and around the scaphoid bones on blood flow images suggested a good clinical course. The activity and the effectiveness of remodeling correlated well with the degree of scaphoid uptake on blood pool images taken more than seven days after the injury. Scaphoid uptake was more localized or there was almost none on blood pool images in cases with nearly complete recovery while it was amply visualized on static images. Blood pool images were indispensable for analyzing lesions and evaluating the clinical course. Two typical findings of scaphoid fractures were found on both blood pool and static images. One was diffusely increased scaphoid uptake seen in cases with a good clinical course, and the other was decreased uptake at proximal fragments seen in cases with non-union. It is concluded that three-phase bone scintigraphy provides useful information for evaluating the process of scaphoid fractures which cannot be obtained by means of conventional bone scintigraphy.     

The use of transmission electron microscopy for the assessment of interphase boundaries

The relative merits of the different ways in which the transmission electron microscope (TEM) has been commonly used to examine the form of interphase boundaries are assessed, and the potential application of the newly developed Fresnel Method is discussed. This paper is based on a presentation made in the symposium “The Role of Ledges in Phase Transformations” presented as part of the 1989 Fall Meeting of TMS-MSD, October 1–5, 1989, in Indianapolis, IN, under the auspices of the Phase Transformations Committee of the Materials Science Division, ASM INTERNATIONAL.