Analyzing the capability of a radio telescope in a bistatic space debris observation system

A bistatic space debris observation system using a radio telescope as the receiving part is introduced. The detection capability of the system at different working frequencies is analyzed based on real instruments. The detection range of targets with a fixed radar cross section and the detection ability of small space debris at a fixed range are discussed. The simulations of this particular observation system at different transmitting powers are also implemented and the detection capability is discussed. The simulated results approximately match the actual experiments. The analysis in this paper provides a theoretical basis for developing a space debris observation system that can be built in China.     

Automated system for reduction of observational data on RATAN-600 radio telescope

We present the automated systemfor estimating the parameters of radio sources observed on all available continuum radiometers (two receiving facilities of secondary mirrors No. 1 and No. 2 with a total of 30 radiometers) developed at RATAN-600 radio telescope and put into normal operation. The system is also used for the monitoring of the parameters of the antenna and receiving systems of RATAN-600 radio telescope, which is carried out using current measurements of calibration radio sources.     

Research on actuator distribution and panels for a radio telescope

Trying to achieve the best surface accuracy control with the fewest actuators, this article mainly studies the distribution of actuators and the method of panel design. The influence of the number of faulty actuators on the accuracy of the surface shape is demonstrated. In addition, the method incorporating a triangular panel, node index and the fitting solution method of a single panel is also given. This method provides a reference for the design and realization of an active surface or a deformable sub-reflector for high performance large aperture radio telescopes.     

Research on the panel adjustment method of an active main reflector for a large radio telescope

The surface accuracy of a large parabolic antenna is an important indicator to evaluate the quality of the antenna.It not only directly affects the antenna’s aperture efficiency,thereby determining the shortest wavelength that the antenna can work,but also affects the main lobe width and side lobe structure of the antenna pattern.Microwave holography is an important method for parabolic antenna profile detection.In this article we adopt a new algorithm to adjust the panels for the large radio telescope with an active main reflector through the TM65 m antenna’s aperture phase profile.The panels of the TM65 m radio telescope is in a radial pattern with 14 rings.Each corner of the panel is fixed on the screw of the actuator to move up and down,and the adjacent corners of the four panels share an actuator.We use the method of plane fitting to calculate the adjustment value of every panel’s corner.But one actuator,which simultaneously controls the common corner of the adjacent panels,will have different adjustment values according to the different plane fitting equation based on adjacent panels.In this paper,the adjustment value of the adjacent panels’crosspoints are constrained to be equal to the constraint condition to calculate each actuator’s adjustment value of the TM65 m radio telescope.Through multiple adjustments and application of the new algorithms,the accuracy of the TM65 m antenna reflector profile has been improved from the original 0.28 mm to the current 0.19 mm.     

New design of large fully-steerable radio telescope reflector based on homogenized mesh structure

The self-weight of a large fully-steerable radio telescope is one of the important factors affecting its performance. In the existing reflector system scheme, the problem of surface accuracy caused by its large and heavy structure has seriously restricted the application and implementation of large radio telescopes.Therefore, a new mesh structure scheme for a large fully-steerable radio telescope reflector is proposed in this paper. This scheme is based on a homogenized mesh back-up structure in the form of a quasi-geodesic grid and regular quasi-tri-prism or tetrahedron, which can significantly reduce the structural complexity and self-weight of the reflector under the condition that the reflector can meet the desired performance requirements. Finally, the feasibility and rationality of the scheme are evaluated by numerical simulation analysis, which has significant advantages and provides a new design for the reflector of a large fullysteerable radio telescope.     

A simulation model for a telescope earthquake analysis: the VST primary mirror safety system

The VST (VLT Survey Telescope) is a wide field survey telescope going to be commissioned at Cerro Paranal (Chile). Due to the geological nature of the area, telescopes in Chile can be submitted to unpredictable and sometimes severe earthquake conditions. The commonly used response spectrum analysis has proven to be not suitable to evaluate the behavior of the VST telescope during an earthquake, due to the high number of devices with a nonlinear force–displacement characteristic in the primary mirror cell. Therefore, a nonlinear transient analysis based on a mixed Finite Element-Simulink approach has been carried out. A linear Finite Element (FE) model of the telescope has been developed and exported to Simulink, using a space state model representation. Then all nonlinear devices have been properly modeled and artificial accelerograms based on seismic history of the site have been applied. The paper focuses on the Simulink model, while giving an overview of the whole procedure.     

Effect of the alidade thermal behavior on the pointing accuracy of a large radio telescope

The alidade's non-uniform temperature field of a large radio telescope is very obvious under solar radiation. Estimating a radio telescope's pointing errors, caused by the alidade deformation under solar radiation, is significant to improve the telescope's pointing accuracy. To study the effect of the alidade thermal behavior on the pointing accuracy of a large radio telescope, a temperature experiment is first carried out in a 70-m radio telescope on a sunny day. According to the measured results, the temperature distribution rule of the alidade is summarized initially. In addition, the alidade's temperature field is calculated by finite element thermal analysis. The simulated results are proved to be in good agreement with the experimental results. Finally, the alidade deformation under solar radiation is computed by finite element thermalstructure coupling analysis. The telescope's pointing errors caused by alidade deformation are estimated via the alidade's node displacements. The final results show that the effect of alidade thermal behavior on the telescope's elevation pointing errors ?ε_2 + ?ε_r is much more than the effect on the telescope's crosselevation pointing errors ?ε_1. The maximum of ?ε_2 + ?ε_r is more than 45, while the maximum of ?ε_1 is less than 6. This study can provide valuable references for improving the pointing accuracy of large radio telescopes.     

A novel method for telescope polarization modeling based on an artificial neural network

The polarization characteristics of an astronomical telescope is an important factor that affects polarimetry accuracy. Polarization modeling is an essential means to achieve high precision and efficient polarization measurement of the telescope, especially for the alt-azimuth mount telescope. At present, the polarization model for the telescope(i.e., the physical parametric model) is mainly constructed using the polarization parameters of each optical element. In this paper, an artificial neural network(ANN) is used to model the polarization characteristics of the telescope. The ANN model between the physical parametric model residual and the pointing direction of the telescope is obtained, which reduces the model deviation caused by the incompleteness of the physical parametric model. Compared with the physical parametric model, the model fitting and predictive accuracy of the New Vacuum Solar Telescope(NVST) is improved after adopting the ANN model. After using the ANN model, the polarization cross-talk from I to Q, U, and V can be reduced from 0.011 to 0.007, and the crosstalk among Q, U, and V can be reduced from 0.047 to 0.020, which effectively improves the polarization measurement accuracy of the telescope.     

A method to measure the mirror reflectivity of a prime focus telescope

We have developed a method to measure the mirror reflectivity of telescopes. While it is relatively easy to measure the local reflectivity of the mirror material, it is not so straightforward to measure the amount of light that it focuses in a spot of a given diameter. Our method is based on the use of a CCD camera that is fixed on the mirror dish structure and observes simultaneously part of the telescope’s focal plane and the sky region around its optical axis. A white diffuse reflecting disk of known reflectivity is fixed in the telescopes focal plane. During a typical reflectivity measurement the telescope is directed to a selected star. The CCD camera can see two images of the selected star, one directly and another one as a spot focused by the mirror on the white disk. The ratio of the reflected starlight integrated by the CCD from the white disk to the directly measured one provides a precise result of the product of (mirror area × mirror reflectivity).     

Adjustment of a tower solar telescope and spectrograph: A method manual

Questions of the mounting and adjustment of a tower solar telescope are considered through the example of the TST-2 telescope of the Crimean Astrophysical Observatory Scientific Research Institute. The authors describe the optical circuits of the telescope and spectrograph and list the basic requirements for the mutual arrangement of individual components of the telescope. Simple methods for adjusting elements of the telescope and spectrograph are described.     

New-generation data acquisition and control system for continuum radio-astronomic observations with RATAN-600 radio telescope: Development,observations, and measurements

A new Data Acquisition and Control System for performing continuum radio-astronomical observations with the RATAN-600 radio telescope is presented. One of the “building blocks” of the system is the Embedded Radiometric Data Acquisition System (ER-DAS) developed at the RATAN-600. It is a measurement facility meant for digitizing and reducing radiometer signals and for transmitting the result of these operations via Ethernet networks. ER-DAS system is shown to have a low self-noise level and to lack 1/f-type noise. The measurement facility is shown to operate efficiently in radio-astronomical observations. Radiometric measurements of the parameters of high-sensitivity radiometers are illustrated in the case of the measurements of radiometer gain fluctuations.     

A method to analyze imaging radio data on solar flares

Microwave imaging data are widely used in analysis of solar flares. To identify essential features and study their behavior, one has to deal with large data sets of hundreds of frames. This allows a single image, a variance map, to represent the overall dynamics of the event. A method is presented that allows investigation of the detected positions of sources in both Stokes I and V using the analysis of variance maps, combined difference images, and total flux time profiles.     

FIRST radio counterpart candidates to ULXs: a catalogue

Ultraluminous X-ray sources (ULXs) are the most luminous discrete X-ray sources (excluding AGNs) in the local Universe with observed luminosities above, and in many cases in excess of, 10³⁹ erg?s^?1. Their physical nature is still uncertain, and many models have been proposed to explain their unusual luminosities. Some of them favour the possible nature of these objects as extragalactic microquasars with strong beaming effects. Others, instead, rely on accretion onto intermediate-mass black holes. In any case, both interpretations offer perspectives for possible gamma-ray detections by future space missions. In order to help to constrain at present the ULX physical nature, we provide here an account of our search for radio counterparts to ULXs located in nearby galaxies, based on a systematic cross-identification of the most recent, available and extensive ULX catalogues and radio archival data. Although we ended up with 70 positional coincidences, most of them were located within the nuclear regions of these galaxies, and thus, they do not represent true ULXs. However, among these sources we identify 11 remarkable cases not previously reported of ULX and radio emission coincidence. Future follow up of these promising cases with a multi-wavelength approach could be useful to improve our understanding of the ULX phenomenon.     

HIKER: a halo-finding method based on kernel-shift algorithm

We introduce a new halo/subhalo finder, HIKER(a Halo fInder based on KERnel-shift algorithm), which takes advantage of a machine learning method – the mean-shift algorithm combined with the Plummer kernel function, to effectively locate density peaks corresponding to halos/subhalos in density field. Based on these density peaks, dark matter halos are identified as spherical overdensity structures, and subhalos are bound substructures with boundaries at their tidal radius. By testing HIKER code with mock halos, we show that HIKER performs excellently in recovering input halo properties. In particular, HIKER has higher accuracy in locating halo/subhalo centres than most halo finders. With cosmological simulations,we further show that HIKER reproduces the abundance of dark matter halos and subhalos quite accurately,and the HIKER halo/subhalo mass functions and Vmax functions are in good agreement with two widely used halo finders, SUBFIND and AHF.     

Collapsing index: a new method to identify star-forming cores based on ALMA images

Stars form through the gravitational collapse of molecular cloud cores.Before collapsing,the cores are supported by thermal pressure and turbulent motions.A question of critical importance for the understanding of star formation is how to observationally discern whether a core has already initiated gravitational collapse or is still in hydrostatic balance.The canonical method to identify gravitational collapse is based on the observed radial density profile,which would change from Bonnor-Ebert type toward power laws as the core collapses.In practice,due to the projection effect,the resolution limit and other caveats,it has been difficult to directly reveal the dynamical status of cores,particularly in massive star forming regions.We here propose a novel,straightforward diagnostic,namely,the collapsing index(CI),which can be modeled and calculated based on the radial profile of the line width of dense gas.A meaningful measurement of CI requires spatially and spectrally resolved images of optically thin and chemically stable dense gas tracers.ALMA observations are making such data sets increasingly available for massive star forming regions.Applying our method to one of the deepest dense-gas spectral images ever taken toward such a region,namely,the Orion molecular cloud,we detect the dynamical status of selected cores.We observationally distinguished a collapsing core in a massive star forming region from a hydrostatical one.Our approach would help significantly improve our understanding of the interaction between gravity and turbulence within molecular cloud cores in the process of star formation.     

Simulation analysis of a method to improve data-transmission performance of Nanshan 26 m Radio Telescope based on Software-Defined Networks

Data Center of Xinjiang Astronomical Observatory(XAO-DC)commenced operating in 2015,and provides services including archiving,releasing and retrieving precious ...     

Generalized Lyapunov exponents indicators in Hamiltonian dynamics: An application to a double star system

The Lyapunov characteristic numbers (LCNs) which are defined as the mean value of the distribution of the local variations of the tangent vectors to the flow (=ln _k ⁱ ) (see Froeschlé, 1984) have been found to be sensitive indicators of stochasticity. So we computed the distribution of these local variations and determined the moments of higher order for the integrable and stochastic regions in a binary star system with =0.5.     

Gamma/hadron segregation for a ground based imaging atmospheric Cherenkov telescope using machine learning methods: Random Forest leads

A detailed case study of γ-hadron segregation for a ground based atmospheric Cherenkov telescope is presented. We have evaluated and compared various supervised machine learning methods such as the Random Forest method, Artificial Neural Network, Linear Discriminant method, Naive Bayes Classifiers, Support Vector Machines as well as the conventional dynamic supercut method by simulating triggering events with the Monte Carlo method and applied the results to a Cherenkov telescope. It is demonstrated that the Random Forest method is the most sensitive machine learning method for γ-hadron segregation.