Plasma‐induced solid‐state polymerization modified poly(tetrafluoroethylene) membrane for pervaporation separation of aqueous alcohol mixtures

Acrylamide (AAm) solid state polymerization was induced using argon plasma to improve the pervaporation performance of poly(tetrafluoroethylene) (PTFE) membranes (PTFE‐g‐PAAm) in aqueous alcohol mixtures. The surface morphology, chemical composition, and hydrophilicity changes in the PTFE and PTFE‐g‐PAAm membranes were investigated using ATR‐FTIR, SEM, AFM, X‐ray photoelectron spectroscopy, and water contact angle measurements. The surface hydrophilicity rapidly increased with increasing Ar exposure time, but decreased after longer Ar exposure time because of the degradation in the PTFE‐g‐PAAm membrane grafted layer. Compared with the hydrophilicity of the pristine PTFE membrane (water contact angle = 120°), the argon plasma induced acrylamide (AAm) solid‐state polymerization onto the PTFE surface (water contact angle = 43.3°) and effectively improved the hydrophilicity of the PTFE membrane. This value increases slowly with increasing aging time and then reaches a plateau value of about 50° after 10 days of storage under air. The pervaporation separation performances of the PTFE‐g‐PAAm membranes were higher than that of the pristine PTFE membrane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:909–919, 2006     

Separation characteristics of pervaporation membrane separation processes using modified poly(vinyl alcohol) membranes

Modified poly(vinyl alcohol) (PVA) membranes prepared by the ‘solution technique’ were tested for ethanol-water mixtures by varying the reaction density (X_cr = 0.05, 0.1) at various temperatures. The results are compared with those of PVA membranes (X_cr = 0.05) prepared by the technique of the GFT Company, Germany.     

Pervaporation characteristics and structure of poly(vinyl alcohol)/poly(ethylene glycol)/tetraethoxysilane hybrid membranes

Poly(vinyl alcohol) (PVA) blended with poly(ethylene glycol) (PEG) was crosslinked with tetraethoxysilane (TEOS) to prepare organic–inorganic PVA/PEG/TEOS hybrid membranes. The membranes were then used for the dehydration of ethanol by pervaporation (PV). The physicochemical structure of the hybrid membranes was studied with Fourier transform infrared spectra (FT‐IR), wide‐angle X‐ray diffraction WXRD, and scanning electron microscopy (SEM). PVA and PEG were crosslinked with TEOS, and the crosslinking density increased with increases in the TEOS content, annealing temperature, and time. The water permselectivity of the hybrid membranes increased with increasing annealing temperature or time; however, the permeation fluxes decreased at the same time. SEM pictures showed that phase separation took place in the hybrid membranes when the TEOS content was greater than 15 wt %. The water permselectivity increased with the addition of TEOS and reached the maximum at 10 wt % TEOS. The water permselectivity decreased, whereas the permeation flux increased, with an increase in the feed water content or feed temperature. The hybrid membrane that was annealed at 130°C for 12 h exhibited high permselectivity with a separation factor of 300 and a permeation flux of 0.046 kg m^?2 h^?1 in PV of 15 wt % water in ethanol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Poly(vinyl alcohol) and poly(vinyl amine) blend membranes for isopropanol dehydration

Blended membranes of hydrophilic polymers poly(vinyl alcohol) (PVA) and poly(vinyl amine) (PVAm) were prepared and crosslinked with glutaraldehyde. The prepared membranes were characterized using infrared (attenuated total reflection mode) spectroscopy, differential scanning calorimetry, X‐ray diffractometry, and scanning electron microscopy measurements. Pervaporation performances of the membranes were evaluated for the separation of water‐isopropanol (IPA) mixtures. As the PVAm content increased from PVAm0 to PVAm1.5, the flux through a 70 μm film increased from 0.023 to 0.10 kg/m² h at an IPA/water feed ratio of 85/15 at 30 °C. The driving force for permeation of water increased due to the temperature but it has no effect on IPA permeation. Activation energies for the permeation of IPA and water were calculated to be 17.11 and 12.46 kJ/mol, respectively. Controlling the thickness of the blend membrane could improve the permeation flux with only a marginal reduction in the separation factor. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45572.     

Blend membranes of chitosan and poly(vinyl alcohol) in pervaporation dehydration of isopropanol and tetrahydrofuran

Blend membranes of a natural polymer, chitosan, with a synthetic polymer, poly(vinyl alcohol) (PVA), were prepared by solution casting and crosslinked with a urea formaldehyde/sulfuric acid (UFS) mixture. Chitosan was used as the base component in the blend system, whereas PVA concentration was varied from 20 to 60 wt %. Blend compatibility was studied by differential scanning calorimetry, and Fourier transform infrared spectroscopy was used to study membrane crosslinking. Membranes were tested for pervaporation dehydration of isopropanol and tetrahydrofuran (THF) at 30°C in close proximity to their azeotropic compositions. Membrane performance was assessed by calculating flux and selectivity. Swelling experiments performed in water + organic mixtures at 30°C were used to explain the pervaporation results. The blend membrane containing 20 wt % PVA when tested for 5 and 10 wt % water–containing THF and isopropanol feeds exhibited selectivity of 4203 and 17,991, respectively. Flux increased with increasing concentration of water in the feed. Selectivity was highest for the 20 wt % PVA‐containing blend membrane. The results of this study are unique in the sense that the crosslinking agent used—the UFS mixture—was novel. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1918–1926, 2007     

Development of quaternarized poly(vinyl alcohol) anion‐exchange membranes for applications in electrodialysis

The main objective of this work is the development of anionic exchange membranes for the treatment of solutions containing metallic ions using the electrodialysis process. Anionic membranes were synthesized from poly(vinyl alcohol), with the insertion of quaternary ammonium groups in the polymeric matrix and subsequent crosslinking with glutaraldehyde and maleic anhydride. Different membranes were synthesized in order to evaluate the combination of physical–chemical properties and ionic transport. The morphology and structure of the membranes were investigated by scanning electron microscopy and infrared spectroscopy. The thermal transitions and stability of all the membranes were characterized using calorimetric techniques: thermogravimetric analysis, and differential scanning calorimetry, and compared with those of the individual polymers. The physical properties (ion‐exchange capacity, water absorption, and dimensional stability) showed that the different crosslink agents used significantly affect the membrane properties. The electrodialysis performance of the membranes in the transport of chloride and nitrate ions showed that the membranes produced can be successfully used in this separation process. Selemion® AMV commercial membrane was used to compare the percentage extractions of the indicated ions with the produced membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44946.     

Gas permeation through water‐swollen polysaccharide/poly(vinyl alcohol) membranes

The effect of Na‐alginate content on the gas permeation properties of water‐swollen membranes prepared by varying Na‐alginate and poly(vinyl alcohol) (PVA) content in membranes was investigated. The influences of water content and crystallinity of the membranes on the gas permeation performance of the water‐swollen membranes were studied. The gas permeation rate and selectivity of Na‐alginate/PVA water‐swollen membranes were compared with those of the dry membranes. The permeation rates of nitrogen and carbon dioxide through water‐swollen membranes were in the range of 0.4–7.6 × 10^?7 to 3.7–8.5 × 10^?6 cm³ (STP)/cm² s^?1 cmHg^?1, which were 10,000 times higher than those of dry‐state membranes. The permeation rates of mixture gases through water‐swollen Na‐alginate/PVA membranes were found to increase exponentially with the increase of Na‐alginate content, whereas carbon dioxide concentration in permeates was decreased linearly. It was found that the gas permeance of the water‐swollen membranes increased with increasing the Na‐alginate content in the membrane. Gas permeation rates of the water‐swollen Na‐alginate/PVA membranes increased with increasing the water content in the membrane and decreasing the crystallinity of the membrane. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3225–3232, 2004     

Preparation of Cu(II)‐chelated poly(vinyl alcohol) nanofibrous membranes for catalase immobilization

Poly(vinyl alcohol) (PVA) nanofibers were formed by electrospinning. Metal chelated nanofibrous membranes were prepared by reaction between Cu(II) solution and nanofibers, and which were used as the matrix for catalases immobilization. The constants of Cu(II) adsorption and properties of immobilized catalases were studied in this work. The Cu(II) concentration was determined by atomic absorption spectrophotometer (AAS), the immobilized enzymes were confirmed by the Fourier transform infrared spectroscopy (FTIR), and the amounts of immobilized enzymes were determined by the method of Bradford on an ultraviolet spectrophotometer (UV). Adsorption of Cu(II) onto PVA nanofibers was studied by the Langmuir isothermal adsorption model. The maximum amount of coordinated Cu(II) (q_m) was 2.1 mmol g⁻¹ (dry fiber), and the binding constant (K_l) was 0.1166 L mmol⁻¹. The immobilized catalases showed better resistance to pH and temperature inactivation than that of free form, and the thermal and storage stabilities of immobilized catalases were higher than that of free catalases. Kinetic parameters were analyzed for both immobilized and free catalases. The value of V_max (8425.8 μmol mg⁻¹) for the immobilized catalases was smaller than that of the free catalases (10153.6 μmol mg⁻¹), while the K_m for the immobilized catalases were larger. It was also found that the immobilized catalases had a high affinity with substrate, which demonstrated that the potential of PVA‐Cu(II) chelated nanofibrous membranes applied to enzyme immobilization and biosensors. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Pervaporation separation of water/dimethylformamide mixtures using poly(vinyl alcohol)‐g‐polyacrylamide copolymeric membranes

Grafted copolymeric membranes of poly(vinyl alcohol) with acrylamide (PVA‐g‐AAm) were developed and used in the pervaporation separation of water–dimethylformamide mixtures by varying the amount of water in the feed from 0 to 100%. From these data, the permeation flux, pervaporation separation index, diffusion coefficient, swelling index, and separation selectivity were calculated at 25, 35, and 45°C. The Arrhenius activation parameters for permeation flux ranged between 22 and 63 kJ/mol, while the activation energy for diffusion ranged between 23 and 67 kJ/mol. Separation selectivity was between 15 and 22. The highest permeation flux of 0.459 kg m^?2 h^?1 was obtained for the 93% grafted membrane at 90% of water in the feed mixture. The results are discussed using the principles of the solution–diffusion model. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 273–282, 2002     

Pervaporation dehydration of water/ethanol/ethyl acetate mixtures using poly(vinyl alcohol)–silica hybrid membranes

The novel organic–inorganic hybrid membranes were prepared from poly(vinyl alcohol) (PVA) and vinyltriethoxysilane (VTES). They were characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), and contact angle metering. The as‐prepared membranes are formed at a molecular scale at a low VTES content. Aggregations in the surface of the as‐prepared membranes were clearly evident above 18.43 wt % VTES loading. The introduction of VTES into the PVA matrix resulted in a decrease in the crystalline and an increase in compactness and thermal stability of the as‐prepared membranes. Silica hybridization reduced the swelling of the as‐prepared membranes in water/ethanol/ethyl acetate mixtures, decreased the permeation flux, and remarkably enhanced water permselectivity in pervaporation dehydration of ethanol/ethyl acetate aqueous solution. The hybrid membrane with 24.04 wt % VTES has the highest separation factor of 1079 and permeation flux of 540 g m^?2 h^?1. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of hybrid membranes using poly(vinyl alcohol) and tetraethylorthosilicate for the pervaporation separation of water–isopropanol mixtures

Hybrid membranes were prepared using poly(vinyl alcohol) (PVA) and tetraethylorthosilicate (TEOS) via hydrolysis and cocondensation reaction for the pervaporation separation of water‐isopropanol mixtures. The resulting membranes were characterized by Fourier transform infrared spectroscopy, wide‐angle X‐ray diffraction, and differential scanning calorimetry. The glass transition temperature of these membranes varied from 100 to 120°C with increasing TEOS content. Effects of crosslinking density and feed compositions on the pervaporation performances of the membranes were studied. The membrane containing 1.5:1 mass ratio of TEOS to PVA gave the highest separation selectivity of 900 at 30°C for 10 mass % of water in the feed mixture. It was found that the separation selectivity and permeation flux data are strongly dependent on the water composition of the feed and operating temperature. However, the membrane with the highest crosslinking density showed unusual pervaporation properties. The overall activation energy values were calculated using the Arrhenius‐type equation. The activation energy values for the permeation and diffusion varied from 49.18 to 64.96 and 55.13 to 67.31 kJ/mol, respectively. Pervaporation data have also been explained on the basis of thermodynamic quantities. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1304–1315, 2004     

Crosslinked blended poly(vinyl alcohol)/N-methylol nylon-6 membranes for the pervaporation separation of ethanol–water mixtures

Crosslinked blended membranes of poly(vinyl alcohol) (PVA) and N-methylol nylon-6 were prepared either by thermal crosslinking at 180°C or by chemical crosslinking with maleic acid. The pervaporation performance for the separation of ethanol–water mixtures of these membranes was investigated in terms of feed concentration, PVA content, and crosslinking agent content. The pervaporation performance of two differently crosslinked membranes was strongly influenced by the nature of the crosslinkage. Significant improvement in the pervaporation separation index can be achieved for chemically crosslinked membranes. From the comparison between the pervaporation and sorption tests, it is suggested that, for hydrophilic membranes, sorption properties dominate the pervaporation performance at feed solutions of higher water content, while diffusion properties govern at feed solutions of higher ethanol content. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 317–327, 1998     

Modification of poly(vinyl alcohol) membranes using sulfur-succinic acid and its application to pervaporation separation of water–alcohol mixtures

For the purposes of the water-selective membrane material development for pervaporation separation, we crosslinked poly(vinyl alcohol) (PVA) with sulfur-succinic acid (SSA), which contains —SO₃OH, by heat treatment and investigated the effect of the crosslinking density on the separation of water–alcohol mixtures by pervaporation technique. The crosslinking reaction between PVA and SSA was characterized through Fourier transform infrared spectroscopy and differential scanning calorimetry tests by varying the amount of the crosslinking agent, the reaction temperature, and the swelling measurements of each pure component. The separation performance of the water–methanol mixture is not good due to the existence of sulfonic acid, hydrophilic group, in the crosslinking agent. However, for the water–ethanol mixture, the flux of 0.291 kg/m²h and the separation factor of 171 were obtained at 70°C when PVA-crosslinked membrane containing 7 wt % SSA was used. The same membrane also showed flux of 0.206 kg/m²h and a separation factor of 1969 at the same operating temperature. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1717–1723, 1998     

PVA基聚电解质渗透汽化膜的研究进展

介绍了聚电解质及其渗透汽化膜材料的优异性能,综述了聚乙烯醇(PVA)聚电解质渗透汽化膜材料的研究进展,阐述了两性聚电解质(APE)材料的特性,其内盐结构改善了膜的耐水性和耐高温性.90℃时,各种PVA基APE材料用于纯度为95%的工业乙醇脱水,分离因子在1 100～1 300,渗透通量为2 500～1 600g/(m<...     

Thermal properties and non‐isothermal crystallization behavior of biodegradable poly(p‐dioxanone)/poly(vinyl alcohol) blends

Blends of two biodegradable semicrystalline polymers, poly(p‐dioxanone) (PPDO) and poly(vinyl alcohol) (PVA) were prepared with different compositions. The thermal stability, phase morphology and thermal behavior of the blends were studied by using thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). From the TGA data, it can be seen that the addition of PVA improves the thermal stability of PPDO. DSC analysis showed that the glass transition temperature (T_g) and the melting temperature (T_m) of PPDO in the blends were nearly constant and equal to the values for neat PPDO, thus suggesting that PPDO and PVA are immiscible. It was found from the SEM images that the blends were phase‐separated, which was consistent with the DSC results. Additionally, non‐isothermal crystallization under controlled cooling rates was explored, and the Ozawa theory was employed to describe the non‐isothermal crystallization kinetics. Copyright © 2006 Society of Chemical Industry     

Ionic liquid‐modified graphene/poly(vinyl alcohol) composite with enhanced properties

How to preserve the structure integrity of graphene while enhance its dispersion and compatibility in matrix attracts the attention of researchers in graphene/polymer nanocomposite field. In this paper, methacryloxyethyltrimethyl ammonium chloride (DMC), a kind of ionic liquids, was first used to non‐covalently functionalize graphene in the process of graphene oxide (GO) reduction. The as‐modified graphene (DMC‐rGO) was further incorporated into poly(vinyl alcohol) (PVA) matrix by solution casting technique to fabricate DMC‐rGO/PVA composites. The structure and properties of the obtained DMC‐rGO were investigated by X‐ray diffraction analysis (XRD), X‐ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscope (TEM), Atomic force microscopy (AFM), and Raman test. The results showed that graphene could be successfully modified by DMC through ionic–π interaction and the structure integrity of the graphene could be reserved by this non‐covalently approach. Furthermore, after co‐reduction process, some hydroxyl groups were introduced into DMC‐rGO. In virtue of these intrinsic properties of DMC‐rGO, the fabricated DMC‐rGO/PVA composites exhibit considerable enhancements in mechanical properties and remarkable improvements in thermal stability, as well as the enhancement in electrical conductivity at low DMC‐rGO loading. This simple modification approach gives a new opportunity to improve the performances of graphene/polymer composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45006.     

Thermal and spectroscopic studies of poly(N‐vinyl pyrrolidone)/poly(vinyl alcohol) blend films

Poly(N‐vinyl pyrrolidone) (PVP) and poly (vinyl alcohol) (PVA) homopolymers and their blended samples with different compositions were prepared using cast technique and subjected to X‐ray diffraction (XRD) measurements, infrared (IR) spectroscopy, ultraviolet/visible spectroscopy, and thermogravimetric analysis (TGA). XRD patterns of homopolymers and their blended samples indicated that blending amorphous materials, such as PVP, with semicrystalline polymer, such as PVA, gives rise to an amorphous structure with two halo peaks at positions identical to those found in pure PVP. Identification of structure and assignments of the most evident IR ‐ absorption bands of PVP and PVA as well as their blends in the range 400–2000 cm^?1 were studied. UV–vis spectra were used to study absorption spectra and estimate the values of absorption edge, E_g, and band tail, E_e, for all samples. Making use of Coats‐Redfern relation, thermogravimetric (TG) data allowed the calculation of the values of some thermodynamic parameters, such as activation energy E, entropy ΔS^#, enthalpy ΔH, and free energy of activation ΔG^# for different decomposition steps in the samples under investigation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Swelling and mechanical behavior of modified poly(vinyl alcohol)/laponite nanocomposite membranes

Nanocomposite (NC) membranes based on hydrophobically modified PVA and laponite were synthesized with varying laponite content in the feed. The incorporation of laponite in NC membranes was investigated by FTIR spectroscopy and thermogravimetric analysis. The swelling ratio of membranes was determined as a function of temperature and laponite content. Swelling studies of NC membranes exhibited the decrease in swelling with an increase in laponite content in the NC membranes. The swelling ratio of NC membrane with 20% laponite slightly increased with an increase in temperature. Dynamic mechanical analysis showed the systematic increase in storage modulus with laponite content, which indicates the enhancement of mechanical property upon laponite addition. There was also a decrease in the tan δ peak values of NC membranes with an increase in laponite content in NCs. The permeabilities through NC membranes as a function of solute size and laponite content were studied and the results showed molecular screening based on size. The permeability of solute reduced due to the presence of well‐dispersed laponite in the NC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2896–2903, 2007